Hino Truck accident made the very badly broken new again | Truck Body Manufacturing 

Wonder how many times this truck frame has been straightened and bent over it's life time 😅

Correct me if I am wrong - but truck chassis have DO NOT WELD tags on them for a reason. The rails are specially treated steel- and welding introduces heat - which compromises the structural properties of the steel. BUT - I also understand that a Hal good repair may be better than no repair in such countries. Fantastic determination from these guys though. CHEERS from AUSTRALIA.

Any wagers on how many pieces of the driver are still in that mangled cab?

You can always find another driver but trucks are precious

It's amazing that all body parts and limbs are present on workers with this type of work

Like watching the Flintstone's garage. Awesome.

As a boilermaker/ welder i would say if that frame is straight so is Elton John . Welding filled with porosity 😮 wow

The only people who will survive a post apocalyptic world

Much like these gentlemen in Pakistan, I remember, back in 1988 in Bombay (as it was then), going with a friend of mine down to what he called the "used truck market" and it was literally a truck graveyard where everything that was destroyed was being cut apart with the future plan of making it "whole" again. So, I watched them for a couple of hours doing exactly as these men were doing in the video. My friend K.P. asked me : "so what do you think?" I replied "honestly?" He said "sure. Pretty impressive right?" "Ahem, pretty dangerous more like." He asked me why I said that and I had to explain to him what happens when a ladder-rack chassis has a catastrophic accident and then all kinds of welding torches apply heat to the damaged areas. They're compromised and can never have the longitudinal strength again that they once had. It was so funny watching every one of these workers, who all spoke English, nodding and smiling and one old man even said, with the usual Indian rock of the head and "Atcha, atcha. He knows. Scottish Engineer." I am Scottish but never studied Engineering or Metallurgy. That said, those guys do a phenomenal job to satisfy an environment which is poor monetarily but rich in intuition. Never saw so many guys with smashed fingers, amputated limbs, missing eyes or blind from the torches (welding goggles? What's that?).

No goggles, no safety boots, no gloves, and no hard hats. They are extremely talented though.

My respect for Pakistani mecanic 😊😊😊

If you ever drive behind a truck and it looks like it’s crab walking down the road, this is why lol.

As a Star Wars fan this is like watching Jawas in real life.

"Almost straight is very great." That's our motto! Used to be, " Lots of holes meet our goals!"

Necessity is the mother of invention. Respect

Maybe I'm wrong but doesn't each one of those heat areas now become extremely brittle?

I enjoy watching you all work. All hard workers.

"We can rebuild it. We have the technology. We can it make better, than it was. Better, stronger, faster."

These are still real craftsmen !

Such highly skilled craftsmen ................. a real pleasure to watch.

Highly skilled guys they know what they are doing . These people would survive with anything thrown at them .

It’s funny here in 🇬🇧 my car had a tiny bump on the front end….the insurance company said it was a write-off 🤣🤣🤣 well done these lads

I just absolute love and appreciate these guys ingenuity - which is obviously driven by "anything is possible" when you put your mind to it. I am an artisan myself - toolmaker - and i know tbe tough circumstances these guys face....man i take my hat off to you skills. Dont ever stop - please teach the next generation. All the best from SA!!

Simply awesome !!!! Would rather walk though

Seja o que for a habilidade e força de vontade deles é impressionante, que Deus os proteja sempre

Hard job… made by people who likes to work without complaining.. I respect those guys.

J'ai beaucoup de respect pour cegenre de travailleurs, car absolument tout est récupérable.

Outstanding workmanship.

I'm not well versed in vehicle repair like this, but boy, their work ethic and repair skills really impressed me!

Судя по наличию многих приспособлений, без работы не остаются . Круговорот грузовиков в природе. Интересно, с какой высоты падала эта машина, и как ее потом доставали из ущелья. Наверное не менее интересное видео.

I would like to see how long this one stayed on the road - Nice end looks - Far from Road Ready a strip of metal across the bottom aint gunna last long on a frame that stressed

The Chassis is high strength steel. If it is welded or heated then the heat affected zone with a fast cooling rate can form a brittle martensite. You can't safely hot work high strength steels the way shown in this video. The next accident will be from the truck breaking in half.

Play this video backwards and the heroes become the villains.

It'll do rough and ready like most of this genre of videos . For example where was the grease on the leaf spring pins, the primer paint on the chassis etc etc. I watched another of a guy reclaiming a tractor tyre that had a palm sized hole in the tread, when finished cosmetically it looked great, but I couldn't see how there was enough strength in the repair for it to last.

Always a pleasure, watching hard workers doing amazing work. 👍

Total admiration, great job guys!

A great reason to not visit Pakistan, knowing there are death traps like this allowed back on the road. Life is so cheap in these countries, sad to see 😢

Hearing protection ? Eye protection ? Foot protection ? Head protection ? Hand protection ? SCREW THAT LETS GET TO WORK !!!!! True men at work !

They can do all this but can't build a pair of work boots.

судя по состоянию машин, они ездят точно также, как и ремонтируют :-))))

Some of the best body and automotive mechanical repairmen in the world!

Where human life has less value than a truck🤦‍♂️

Не смотря на самые большие санкции в России такое продолжают выкидывать и покупать новые грузовики. Рекомендую этим ребятам страховать свои грузовики.

That was a gnarly accident. That didn't look survivable.

Golly, what a great team, they buzz around like busy bees, using great ideas to achieve great results, may I just use two words to describe them, BLOODY AMAZING. Great craftsmanship, well done. Ken from Australia.

How these guys achieve all of this without gloves is beyond me. Wow!

I like the way the trucks are painted rainbow colors and that the workers are allowed to wear dresses. 🌈

As a retired metal worker I can admire the talents of these guys, All work done by hand. Absolute craftsmen. Kudos.

you have the skills they have evendo you yapping about it..

Wow... Good done.... God bless you ❤

Best I've seen yet ❤

One careful owner....and half a dozen nutcases lol. Great video though 👍

Great video hard work pays off

It's surprising to see how resourceful these guys are and achieve this result with so little means. Unfortunately the high strength steel of the frame loses its mechanical qualities when heated this way. This is done cold with very powerful hydraulic jacks which are of course much too expensive for them.

Very skilled rebuild, perhaps if they had better measuring tools they could return the truck to spec. Good enough to run tho. No different to many rebuild shops in the west in the 50's.

Dit is een levensgevaarlijk chassis waar de kracht totaal is verdwenen totaal niet meer geschikt voor op de openbare weg ongelovelijk.

I'm a licensed welder of 30 years. This my friend is a death trap! You NEVER weld let alone cut a truck frame! Load capacity altered, tensile strength changed and frames are not the same type of steel as other applications!

Saludos para todos desde Miami FL estados unidos 🇺🇸 ,créeme que todos sus trabajos son excelentes y muy unidos en todo lo que hacen los felicito de corazón y seguimos sus videos 🙋

Pakistanis are really talented 👏 👌. Love from tamilnadu

ماشاء الله، عمل رائع ، اصبح احسن من قبل حادث.. المهم و اهم انكم قمتم باحياء شاحنة بعد موتها،

tnx youtube for recomendation.. another video from the planet Tatooine

Congratulations great work

OMG DANGEROUS ACCIDENT 😢😮

Good thing they're wearing safety gear, an accident might happen !

Sadly someone died in that cab. My heart goes out to thier family.

Bro even got a better phone than I got lol Great work guys! Did you guys put the old driver back together also?

Parabéns!!!!!👏👏👏👏👏👏👏👏👏👏

Mis respetos ustedes son artesanos . Me da la impresión que sale mejor ,comprando la cabina ,me imagino que el motor y otras cosas que comprar uno nuevo . Quedó chevere (Bueno)

Once again, you are amazing folks !!

Poor driver made new again too, amazing!

Big work. I think it would have been easier to make another frame? While you did the repair, did someone steal the tires? Wearing some protection while doing jobs would be good though.

Beyond sketchy. That frame is hardened from the factory and they took all the heat treatment out and surely didn't heat treat it again.

A frame rail insert full length would have been much stronger and safer, these trucks are constantly overloaded, i would like to know mans hrs and material costs at the end of these style videos

Yup this is the way farm boys used to fix their stuff, im sure a farmers never delt with this much damage though! Good job

I'm impressed. However, there is a great possibility that it will go round corners on its own. 😂

One careful owner, recent nut and bolt restoration, No expense spared, good for another 200000 miles, full service history supplied. Bernie Mac would have issues selling that

Amazing Job

พวกชั่างทํางานกันดีมากๆๆๆ

saubere arbeit die frage ist läuft der auch noch gerade aus

The fact that they bondo the frame makes me think the buyer doesn't realize it's a rebuilt truck... 😟

Мужики, вы очень крутые!

Лютая дичь😂 Тут рама явно не одного водилу пережила.

mend and make do...true artists...these guys are brilliant...

Quedo como nuevo gran trabajo

Respeto y pena a la vez por estos trabajadores que arriesgan y mucho su integridad fisica en un trabajo que no es ni humano ni bien pagado igualmente toda mi admiración para ellos

смысл в нижней полоске?????она не усиливает раму ни на скручивание ни на сгибание.мои молитвы услышаны.ставят на перед рессоры,в которых меньше 10 листов!!!!!!!!!!!!

Spray painting outside was my favorite 😂

Splendid 👌💯

What these guys can do is impressive. What these guys do is insane.

will it be driveable? YES. that's all that counts.

Did you make the driver new again?

Good job kollegas👍👌

Brilliant stuff . Regarding that really bent second section I think cut it off ; straighten it in a big press then weld it back on would have been a better option ...?

I had a totaled twisted car brought back to life in Matamoros Mx. with the same primitive tools. Perfect road performance. No shimmie, no viering , no uneven tire wear just a damn miracle.

That frame not being bent back properly is going to break again because of all the torque it still has, I mean...brute force it back sure but man...that next driver is going to be in for a wild ride when that weld snaps because of overweight lol

Vastly entertaining views of the third world. Amazing stuff from resilent people

surely that frame is weakend by all the heating needed?

don't know how old they are, but they are physically strong, they way they hammer the frame. ❤❤❤. how much damage to their own body joints.

That's impressive work guys

These guys have done this before. Very skilled!!