HMF Optimizer Installation and Tuning

Подписаться 4,6 тыс.

Просмотров 69 тыс.

50% 1

In this video, we will go over installing and tuning the HMF Optimizer. The HMF Fuel Optimizer is a piggyback fuel controller that is designed to regulate fuel settings for added aftermarket exhausts.
The HMF Optimizer comes preprogrammed with the proper fuel settings for an HMF exhaust system. Tuning is not typically required unless more performance-enhancing products were added to the machine.
DO NOT USE the settings in this video for your machine. They are simply displayed for example.
Visit hmfracing.com/tech for help on tuning and specific tuning settings.

Спорт

Опубликовано:

24 сен 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@mohammadabdulla2193 3 года назад

Should I have hmf exhausted my ATV is stock only k&n air filter

@deonmorris1197 Год назад

Do y’all carry fuel tuners for 2022 can am renegade 650 xmr?

@brandonmartinez7807 Год назад

If i have performance hmf exhaust kn a can am 450 what mode shouldni be in

@user-wy7ki7ie1c Год назад

Is this the solution, to my quad struggling to turn on and stalling? Its a raptor 700r 2022

@ItsHisComedy4You 3 года назад

Hey what tune optimizer should I get for my Yfz 450? I’m getting a HMF exhaust & I’m deciding between the HMF optimizer or the Dynojet Power Commander

@HMFExhausts 3 года назад

A lot of it depends on your personal preference and the type of riding you're doing. You can learn more here-> www.hmfracing.com/tech/2020/09/what-tuning-options-does-hmf-offer

@captaintomseifert5652 3 года назад

Will I have to tweak the settings if I also add a K&N air filter with my exhaust on an Outlander 450?

@HMFExhausts 3 года назад

On a machine such as an Outlander 450 a change in air filter to a K&N, or other aftermarket filter, changes to the HMF Optimizer's pre-programmed tune are not typically required.

@angelvillanueva9301 3 года назад

I have a 2013 raptor 700 with hmf exhaust and optimizer . How do I reset the mode to when I originally hooked it up.? I messed with the modes and I’m not to familiar with it. I don’t want to ruin my bike or motor if that’s possible. Thanks

@HMFExhausts 3 года назад

There is no reset button on the Optimizer itself. If you'd like to load the settings back to the original, visit the link below and select your year, make, and model. The settings displayed will be the settings for your 2013 Yamaha Raptor 700. www.hmfracing.com/tuning/fuel-injected/hmf-optimizer

@o.3ziz Год назад

does the fuel optimizer come with a full system exhaust or should it be bought separately?

@HMFExhausts Год назад

The HMF Fuel Optimizer is sold separately from the exhaust system.

@cannedham3774 Год назад

i bought a titan that came with an optimizer for my 2017 1000r. I added a quiet core to it. Should I make any adjustment to the optimizer?

@HMFExhausts Год назад

There should be no need for additional modicications with the HMF Quiet Core. If you have any tech issues, you can always contact us at hmfracing.com

@motorfntrash4254 3 года назад

Hey what is the most powerful mode for a can am 2017 1000 xmr hmm tune thanks

@HMFExhausts 3 года назад

Visit our website at www.hmfracing.com/tech and enter in your machine to get the exact specs you need.

@motorfntrash4254 3 года назад

@@HMFExhausts can I get ur number

@MidnightRider1034 2 года назад

Do i have to change the stock settings if i have a full hmf exhaust along with an aftermarket air intake on a raptor 700?

@HMFExhausts 2 года назад

When you mention "stock settings", are you referring to the stock settings of our HMF Optimizer, or the stock settings of your vehicle? If you install an HMF exhaust on the Raptor 700, a new fuel tuner or settings are required. www.hmfracing.com/exhausts/yamaha/raptor-700 If you already have an HMF exhaust with the HMF optimizer preprogrammed for your Raptor 700, then you may need to tweak the settings for the aftermarket air intake.

@MidnightRider1034 2 года назад

@@HMFExhausts I was referring to the stock settings of the optimizer. I found on yalls website that mode 2 and 3 have to be switched to 4.0 and 3.0 if an air intake is installed so it’s taken care of but thanks for taking the time to reply👍🏻

@theofficialk.a.m...p4760 2 года назад

@@MidnightRider1034 so im getting the slip on and the programmer thingy, what exactly does tuning the raptor mean? Im slow when it comes to motors...

@MidnightRider1034 2 года назад

@@theofficialk.a.m...p4760 The fuel optimizer changes the air/fuel settings on the bike to keep it from running too rich or too lean because putting on a new exhaust will change the air/fuel ratio. If you ordered the HMF optimizer and all you're doing is adding an aftermarket HMF exhaust and not an air intake then you can just throw it on with the exhaust and be done cuz it's already preprogrammed to work with it

@yfz_dom 2 года назад

Yea I got a 2021 yfz hmf comp slip on hmf fuel optimization and ais delete and speed sensor delete and gytr intake I talk to Brian at hmf he said the tunner has to be tweaked when installing a intake

@armynolan6307 2 месяца назад

How do i find the settings for an 09 rincon 680 with a slip on hmf?

@HMFExhausts 2 месяца назад

Visit our website and put in your year make and model. hmfracing.com/tech

@jsvallee567 2 года назад

so if im right ... if i instal a HMF slip on on my can am ... i just need to instal that tuner and its already setup for the slip on ?

@HMFExhausts 2 года назад

That is correct. The HMF Optimizer is a plug-and-play controller, setup to work specifically with your machine and exhaust.

@jsvallee567 2 года назад

@@HMFExhausts alright thanks

@cresttoothpaste6857 3 года назад

You guys should really show where exactly the fuel injectors are on specific models, hardest part is trying to find where they are

@HMFExhausts 3 года назад

We would like to, but we don't have access to all the machines we've worked on in the past. This Optimizer video is designed to be a general guide. Most of the manufacturers have specs on the internet of where their fuel injector is located.

@romper4444 2 года назад

If u cant find the fuel injector(s) on your machine, I don't recommend you install this tuner yourself, no disrespect.

@Robsterx Год назад

@@romper4444 oh Billy badass here

@siahgbaby 3 года назад

Does this optimizer work with yfz 450r 2021 ?

@TalenBoudreaux.9 2 месяца назад

When u go on website you pick your quad so it’s pre set

@marcorivas8514 3 года назад

I heard that the optimizer is pretuned for me to remove my stock airbox lid is that true 2020 raptor 700se

@HMFExhausts 3 года назад

That is correct. The Optimizer is set for a Stock Air Box Lid removed on the 2020 Raptor 700

@poorwhiteboy6521 3 года назад

Do you know what settings you have it at ? I have 2019 700R any help would be thankful

@HMFExhausts 3 года назад

@@poorwhiteboy6521 Visit hmfracing.com/tech and enter in your model for all the tuning specifications and settings for you machine.

@nicky_9791 2 года назад

If a throw a full hmf on my yfz450 r will it already be good for it?

@HMFExhausts 2 года назад

Your YFZ will need a Fuel Controller to manage the air-fuel ratio. The HMF Optimizer will come preprogrammed for your vehicle.

@nicky_9791 2 года назад

Yeah I have an hmf performance optimizer I think it might be the same one as shown on the video but this one has like flames on it is that just an older version

@AR15DEMON 3 месяца назад

I have a 2016 raptor 700. It looses power in the mid throttle range but then gains it back when I pin the the throttle. I don’t know what the problem is

@HMFExhausts 3 месяца назад

That's strange, can you confirm your Optimizer Settings. If the Optimizer is set correctly, please verify the Optimizer mode and slightly add or subtract fuel and recheck for performance gains. Mode 1: Green: 4.0 Mode 2: Amber: 3.5 Mode 3: Red: 2.0 Mode 4: Green/Blue: 3.0 Mode 5: Amber/Blue: 3.5 Mode 6: Red/Blue: 4.0

@Calii8708 Год назад

I got a 2022 raptor 700r se ans about to put a hmf slip on what mode should I put on?

@HMFExhausts Год назад

Mode 1: 4.0 Mode 2: 3.5 Mode 3: 2.0 Mode 4: 3.0 Mode 5: 3.5 Mode 6: 4.0

@Calii8708 Год назад

@@HMFExhausts what does this mean lol

@HMFExhausts Год назад

@@Calii8708 Those are the fuel settings for the HMF Fuel Optimizer for a 2022 Raptor 700R. As stated in the video, there are 6 modes to change the settings and the settings provided are for an HMF exhaust on a 22 Raptor. Did you mean something else when asking "What mode to put it on?"

@Pumpy999 Месяц назад

What settings should I be using for raptor 700r 2024 SE FULLY stock just HMF performance slip on

@HMFExhausts Месяц назад

You can get any settings for your Optimizer at hmfracing.com/tech

@Pumpy999 Месяц назад

@@HMFExhausts it’s throwing a CEL.

@chaseschuckers8856 2 года назад

i am back firing and have the settings at the lowest what settings should i put it at?

@HMFExhausts 2 года назад

You need to make sure you set the settings to what we recommend. Setting all of the modes to the lowest setting is going to cause issues. Visit hmfracing.com/tech for more information and your specific settings.

@chaseschuckers8856 2 года назад

@@HMFExhausts i had to set it tk lowest bc when it’s not at lowest it sputters mid range

@HMFExhausts 2 года назад

@@chaseschuckers8856 Contact our Tech team for help -> www.hmfracing.com/tech

@georgewilson1634 3 года назад

I just installed hmf slip on and fuel optimizer. Works well,sounds great. But i lost about 60km per tank of fuel. That doesn't seem right

@luiscarbajal4509 2 года назад

Would it work for a kpm 200 Lifan?

@danieljaramillo3740 3 года назад

Hey Great video but I have a question so I have a 08 Honda trx 700xx and I have the big gun exhaust but I don’t have a fuel optimizer I tried find the big gun fuel optimizers i found one but I couldn’t buy cause it didn’t meet California laws Will this hmf work for my quad even though I have the big gun exhaust?

@HMFExhausts 3 года назад

This Fuel Controller will work with any exhaust, but the fuel settings preprogrammed on the Optimizer are for HMF exhausts. You may have to tweak your Optimizer settings... or just get an HMF exhaust ;)

@macpac3803 3 месяца назад

What should the settings be for 2018 raptor 700 with hmf slip on & pro design with clamp on k&n filter? I believe its just blinking 1...

@HMFExhausts 3 месяца назад

You can always find tuning settings here www.hmfracing.com/tuning 2018 Yamaha Raptor 700 Mode 1 - 4.0 Mode 2 - 3.5 Mode 3 - 2.0 Mode 4 - 3.0 Mode 5 - 3.5 Mode 6 - 4.0

@macpac3803 3 месяца назад

@@HMFExhaustsAwsome thanks.

@macpac3803 3 месяца назад

@@HMFExhaustsi havent messed with it yet but i just looked and 1 & 2 is green while at idle, that isnt correct is it?

@macpac3803 3 месяца назад

@@HMFExhaustswith the key on 1 & 8 blink green, idle 1 & 2 stay solid green. It was shipped with a hmf slip on and a pro design flange was put on with k&n filter with out wear air box lid on... i just dint wanna monkey with it if its set where it should be...

@poorwhiteboy6521 3 года назад

What's a good setting for a 2019 700r raptor with hmf slip on exhaust

@erickgutierrez2181 3 года назад

Did you find a good mapping for it I got the same setup

@poorwhiteboy6521 3 года назад

Yes go to hmf web site. It's really easy once you select your year and model it tells you the number for each setting

@QuadBeast 3 года назад

Hi, please show the installation Power commander fuel controller. Thanks.

@HMFExhausts 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I_uISc8l-X4.html

@haydensharp7064 2 года назад

Can some one tell me if I get this hmf fuel optimzer will it work with all full fmf pipe

@Haha-123 2 года назад

Had my hmf optimizer installed at the dealership when I bought my 21’ Yamaha Raptor 700R SE the check engine light turns on at high rpm’s only was wondering what that might be if you guys could get back to me please kinda worried something might happen

@HMFExhausts 2 года назад

Looks like you could potentially have a Warranty Claim with your Raptor Optimizer box. Contact our service team at hmfracing.com to get you take care of. www.hmfracing.com/support/contact

@kevinkemmerling5621 2 года назад

Yeah had mine on about a year the check engine light stays on took it to the dealer hooked it up to computer turns out the optimizer is junk. Emailed hmf got no reply. Better off buying a EHS tuner

@ThatBlack6.7 3 месяца назад

Bought a bike with this on it. Looked on your website and it doesn't list my machine. Contacted hmf and they said they cant help me and im screwed. Guess ill take that hmf off and trash it. Fmf here i come.