HMS Bounty The Making Of

Подписаться 18 тыс.

Просмотров 131 тыс.

50% 1

The Making of HMS Bounty wooden model. The model is made by Constructo. The scale is 1:50.
Check out my personal recommendations from Modelers Central :
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Advanced
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Expert
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
Tools
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
www.modelerscentral.com/model...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotfwn

Развлечения

Опубликовано:

14 ноя 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 147

@MrBonito22 5 лет назад

Well done. I have just finished my first model,Santa Maria. I chose to leave sails off. Also had some teak oil left over from my real yacht, brings out the wood beautifully. If you are happy with finish that's all that counts.

@JohnsWoodenShips 5 лет назад

Thank you very much! You couldn't say it better, if you like what you made it's all that counts!

@johnreid5539 3 года назад

Watching a build by a craftsman is something to really appreciate thank you. Building the same kit 1st varnished completed but still showing some glue patches

@JohnsWoodenShips 3 года назад

Thank you John!!! You use gloss or matt varnish?

@johnreid5539 3 года назад

@@JohnsWoodenShips Matt (would a semi matt work or has to be Gloss)

@JohnsWoodenShips 3 года назад

@@johnreid5539 I haven't use semi matt, but i can insure you that with gloss everything goes away, no glue marks are visible.

@johnreid5539 3 года назад

@@JohnsWoodenShips Thanks John

@hugoagogo4324 3 года назад

You are a fantastic ship modeller John

@JohnsWoodenShips 3 года назад

Thank you so much 😀

@stef2499 4 года назад

Really nicely done! It looks perfect. I built the same model. Im almost finished, just working on the last sails now, but every part on my ship is just a bit less good looking 😂 but i love this model. Its perfect

@JohnsWoodenShips 4 года назад

It is a beautiful model indeed! Thank you very much!!!

@72secondprize 6 лет назад

Lovely build. Well done.

@JohnsWoodenShips 6 лет назад

Thank you very much!

@copferthat 4 года назад

This was the very last model I built, after 25 years of modelling, I just ran out of space to put them all and gave away a few to the family too. I just couldn’t do a single layer hull though and having enough white wood over from other jobs, I double hulled mine. I also prefer to use Colron’s antique oil instead of varnish, we modellers all have our own ways. You have made a wonderful job of it, it’s a credit.

@JohnsWoodenShips 4 года назад

Thank you very much for your kind words!!! Indeed , us modelers we have our own way, so we must judge not with what we like but with the work that a model has and also the result. You like antique oil, i respect that, i like gloss varnish, someone else likes matt varnish, it is normal and that's the way it should be. I believe that if you liked the Bounty you are going to love the next 3, take your time to watch them : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nNmNqme4oAI.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gS0SDJ9-kGI.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IIqyRDiHRnU.html

@copferthat 4 года назад

I’ve just taken a look on amazon and you can get this kit for £148 delivered free. Now that’s a good deal.

@franciscoramoncleriguesrov7187 2 года назад

Precioso, excelente trabajo. Enhorabuena

@JohnsWoodenShips 2 года назад

Thank you very much!!!

@-san..892 6 лет назад

Very nice ship model !

@JohnsWoodenShips 6 лет назад

Thank you very much!!!

@user-kw9zx2cm4q 5 лет назад

Great job!

@JohnsWoodenShips 5 лет назад

Thank you very much!!!

@gladius881 4 года назад

man you got some great vids, good music choices as well. lol waltz of the flowers for a mutineers ship

@JohnsWoodenShips 4 года назад

Thank you very much!!! I am glad that you like them!!!

@-privat-6696 4 года назад

I'm only building Revell -models, but that looks a lot more nice...I would have no patience for it. Good work, and greetings from Germany:-)

@JohnsWoodenShips 4 года назад

Thank you very much for your kind words!!!

@fastfreddy3103 3 года назад

I bought this exact kit over twenty years ago...still on my shelf. Now that I am retired I'll give it a go. I am not as skilled a modeler as yourself...

@JohnsWoodenShips 3 года назад

It's time to give it a try, it wasn't a hard one :)

@tonyromano6220 2 года назад

Wood is forgiving.

@konstantinosskodras1625 4 года назад

Πολύ ωραία δουλειά,μου αρέσει κυρίως τα χρώματα των βερνικιών πού χρησιμοποίησες!!

@JohnsWoodenShips 4 года назад

Σε ευχαριστω πολυ Κωνσταντινε!!!

@robertsalanon2909 4 года назад

Très beau résultat ...

@JohnsWoodenShips 4 года назад

Thank you very much!!!

@cmuchmore 6 лет назад

Bravo!

@JohnsWoodenShips 6 лет назад

Thank you very much!

@Reddie122 5 лет назад

+John Aliprantis can you make a ship model with stick popsicles?

@codec421 3 года назад

very nice ship. may I ask how long time did it take you to build it?

@JohnsWoodenShips 3 года назад

Thank you very much!!! It was a long time ago, if i remember correctly it must have been 3-4 months.

@thomasbarth4683 5 лет назад

Respekt!!!!

@JohnsWoodenShips 5 лет назад

Thank you very much!!! If you liked the Bounty i'm sure your gonna love the Santa Ana (Santa Ana The making of)! When you have the time take a look, it's stunning!!!

@RobertJackman 3 года назад

This is another wonderful video, as ever you make it look so easy. I wonder though about the Union flag. The mutiny happened in 1789 - that is before Ireland joined the Union. So, I believe that the diagonal red cross would be missing from the flag. Perhaps I'm incorrect about this.

@JohnsWoodenShips 3 года назад

Thank you very much Robert for your kind words!!! I do not know about the flag and to tell you the truth i didn't check it out historically. I 've just watched the movie :)

@treesss56 5 лет назад

Beautiful model very well done but the high gloss finish it's not to scale and ruins the realism.

@JohnsWoodenShips 5 лет назад

Thank you very much! Like i said in a previous comment, i chose gloss varnish because i like the way it "brings" out the wood. Also it's far more easy to clean it from everything and there's no risk at all to get spots from the varnish.

@unitedstatesofamerica5688 3 года назад

That's one shiny ship

@JohnsWoodenShips 3 года назад

Yes it is, i love gloss varnish!

@buddyh42uk 3 года назад

Hi can I ask how you managed to do the hex cuts on I think its called the Windlass at 3:20 in the video?

@JohnsWoodenShips 3 года назад

I used a small plane from the middle and one side, then from the middle and the other side all the way around until i got the shape i wanted.

@buddyh42uk 3 года назад

@@JohnsWoodenShips Thanks for your answer John. I appreciate your work mate, this is my first ever wood build, and I am holding back to do the boarding of the hull, I will work out how am gonna do it soon as I have built all the deck stuff so only left with the hull and the masts lol.

@buddyh42uk 3 года назад

Another question if you dont mind I am about to start doing the blocks but nowhere that I can see in the Instructions does it say how many of each type you need, there are some just with wire others with hoops in the wire etc how did you find out what was needed?

@JohnsWoodenShips 3 года назад

@@buddyh42uk Each type of block has a number. The big ones are used at the big masts and usually at the center. The small ones are for everything else. The ones with the wire normally are being used at a point that you have a ring to attach the block to.

@saidaliskendarov6102 2 года назад

по моему перебор с лаком

@tabletophobbies.terraintec2697 5 лет назад

Howz it Ive just got this model as a gift and am up to the part where i start putting down the decking ? Whats a good way or method to begin this process and the side panelling and is the side panelling the hard pieces of brown wood or the paper thin wood ???

@JohnsWoodenShips 5 лет назад

First of all i hope to enjoy tour present!!! You have to follow the instructions and always before performing a step read carefully the next 3-4 steps to make sure you do not make any mistake. Use the cyanoacrylic glue for the deck planking and make sure there are no gaps between the strips. For the keel , the kit contains the hard brown (sapely) pieces of wood (i believe there where 2 mm thick and 5 or 6 mm wide) for the keel. The using of the thin wood is only if you are not experienced in the planking of the keel. So after you finished the planking with the hard wood you use the thin above the hard to make a smoother keel. But be careful, if you choose this option then the coloring of the wood wouldn't be different and beautiful, it will be as if you painted the keel brown.

@krismorris8570 6 лет назад

What do you use to bend the wood?

@JohnsWoodenShips 6 лет назад

I moister the wood with water in a small bowl and then i use a soldering iron at 40watt to bend it to shape.

@wikiprananda3597 5 лет назад

Try make a Pinisi ship of Indonesia

@JohnsWoodenShips 5 лет назад

I like better large ships with 3 masts and cannons.

@wikiprananda3597 5 лет назад

@@JohnsWoodenShips Pinis not wear canon 😅😀

@martvaljamae3214 4 года назад

What fabric do you use for sails?

@JohnsWoodenShips 4 года назад

The sails were in the kit, so i do not know the type of the fabric.

@martvaljamae3214 4 года назад

@andersonfelicianorodrigues1563 3 года назад

😃😃😃 quanto custa 😃👏👏👏🤙

@JohnsWoodenShips 3 года назад

How much did i bought it or how much i sell it?

@yunusemre9405 3 года назад

Where do you usually buy these ship kits, can you give me the URL of the website.

@yunusemre9405 3 года назад

And what tipe of glue do you use?

@JohnsWoodenShips 3 года назад

Here is the site : www.occre.com/ and here is the glue : www.super-hobby.gr/products/CA-cement-BOND-thin.html

@yunusemre9405 3 года назад

@@JohnsWoodenShips Thank you so much, I like your projects.

@JohnsWoodenShips 3 года назад

@@yunusemre9405 Thank you very much!!!

@ronjoninthedangerzone576 5 лет назад

Is this the Kit By Artesania latina? Great job also.

@JohnsWoodenShips 5 лет назад

Thank you very much! No this kit is by Constructo.

@ronjoninthedangerzone576 5 лет назад

@@JohnsWoodenShips Sweet thank you very much! Im going to look into this for myself.

@JohnsWoodenShips 5 лет назад

@@ronjoninthedangerzone576 If you need any help in the process of building do not hesitate to ask me :)

@ronjoninthedangerzone576 5 лет назад

@@JohnsWoodenShips Thank you, Im still fairly new to Wooden Ship modeling, so will be a while off before i try this beast. I did have a question about planking, how do you do it, and what are the best ways for a beginner?

@JohnsWoodenShips 5 лет назад

@@ronjoninthedangerzone576 first you have to have the right tools to do the job. Check out my video for the tools : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Qu3rX07OSs.html In a point i explain why the strips at the stern must be less wide, you need that to do the planking. Also check out my other video on how to bend the strips : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8uvnm5BLiKg.html For gluing you need a cyanoacrylic glue to keep the wood strips in place and a white wood glue to glue them strongly where you want. The white glue is for the keel , the main spine and arches of the ship and in any place who will support the main ship. For the deck and the other parts the cyanoacrylic glue is just fine. Before you place any wood strip first you have to check to see if it's going to be in the right place and make any adjustments necessary ,like sanding down the strip or bending it, then glue it. Remember that for a beginner is best to start with an easy model, not an elite series. Also try a model with a keel that is not very "curvy". I hope a helped you. Ask me anything, anytime :)

@cla458 5 лет назад

lindo

@JohnsWoodenShips 5 лет назад

Thank you very much!

@farklefuster6876 5 лет назад

What company manufactured the hit?

@JohnsWoodenShips 5 лет назад

It's Constructo.

@wilsongomezrivera545 2 года назад

Tienen envios aqui

@Dani-ks1gh 6 лет назад

How long did this take you?

@JohnsWoodenShips 6 лет назад

About 3 - 3 and a half months

@user-mj1ex1ei3i 4 года назад

Очень много лака

@wilsongomezrivera545 2 года назад

Quiero uno vivo en brasil

@JohnsWoodenShips 2 года назад

I do not know if Constructo sells anymore, try OcCre (www,occre.com).

@yunusemre9405 3 года назад

Can you say the musics name, neighbor?

@JohnsWoodenShips 3 года назад

It is Waltz of the Flowers by Tchaikovsky.

@isabellathecutekitty4340 5 лет назад

I need that ship

@JohnsWoodenShips 5 лет назад

I will write it with spaces to be able to leave you a comment. G o t o my c h a n n e l at a b o u t t a b, from there you can s e n d m e a n e m a i l. You have to subscribe first. Or s e n d me a m e s s a g e a t m y f a c e b o o k a c c o u n t.

@giannigramaglia8839 6 месяцев назад

Quanto costa

@jaredkeenan9760 5 лет назад

What brand is this?

@JohnsWoodenShips 5 лет назад

It's Constructo.

@user-cl3wf6eo9l 4 года назад

Hot to buy this kit?

@JohnsWoodenShips 4 года назад

The kit is made by Constructo who i believe has gone out of business some years ago. A quick search on Google will give you some results if a shop has it on stock.

@user-cl3wf6eo9l 4 года назад

@@JohnsWoodenShips Thanks

@MEat3088 6 лет назад

What scale is this ship in?

@JohnsWoodenShips 6 лет назад

It's 1:50

@MEat3088 6 лет назад

John Aliprantis very impressive I haven’t seen a lot that scale do you usually build 1:50 scale models?

@JohnsWoodenShips 6 лет назад

Thank you! I have 2 more models 1:51 and 1:52. I chose my models by the company and detail. I like a model to have as much detail as it can so i had to choose a big model. In a couple of exceptions all my models are about 80cm (31 inches) length to 120cm (47 inches).

@giannigramaglia8839 6 месяцев назад

Quanto costa in euro

@JohnsWoodenShips 6 месяцев назад

You want to know how much is the kit or how much is the price for the finished model?

@yakumoyukari4405 5 лет назад

Can't understand what kind of ship is that... Is does not look like frigate or Corvette its look more like some trade ship or something...

@JohnsWoodenShips 5 лет назад

Actually it was a cargo ship. It has a big story connected with the name Christian Fletcher. The ship was send to Tahiti during 1787-1789 for breadfruit plants.The commander was Lieutenant William Bligh's and there was a mutiny on the Bounty, Christian seized command of the ship from Bligh on 28 April 1789. Actually there is a movie based on this story with Antony Hopkins and Mel Gibson and it is a very good one!

@yakumoyukari4405 5 лет назад

@@JohnsWoodenShips oh thanks!

@pmw650 5 лет назад

HMS Bounty was originally built by Blaydes in Kingston upon Hull as the collier Bethia in 1784 and was purchased by the Royal Navy in 1787 for £1950 (about £209000 today) refitted and renamed Bounty.

@Arthur-xk1ps 6 лет назад

Hi can u tell me from where u bought the model pls?? Ty :)

@JohnsWoodenShips 6 лет назад

Hello, i've bought it from Amazon UK 5 - 6 years ago.

@Arthur-xk1ps 6 лет назад

What about the make??

@JohnsWoodenShips 6 лет назад

What do you mean?

@Arthur-xk1ps 6 лет назад

The manufacturer i meant :) artensia latina...or occre or other...

@Arthur-xk1ps 6 лет назад

Atm im building Dos Amigos fro. Occre but i find that theres alot of mistakes in the plans and its not very accurate...plus im a begginner so i try my best but it doesnt come out how i want it

@dr.rishikeshpansambal8830 5 лет назад

I work on projects for 4 month.... But fail.... To complete........

@JohnsWoodenShips 5 лет назад

What type of projects? What problem did you encounter and failed to complete? Maybe i can help you.

@user-ko4mc8pg2r 6 лет назад

Glossy varnish and wooden model of the ship are incompatible things.

@JohnsWoodenShips 6 лет назад

I chose gloss varnish because i like the way it "brings" out the wood. Also it's far more easy to clean it from everything and there's no risk at all to get spots from the varnish, it was my choice and i like it.

@zoesdada8923 5 лет назад

Exactly

@zoesdada8923 5 лет назад

@@JohnsWoodenShips if it was your choice you chose poorly

@JohnsWoodenShips 5 лет назад

It's your opinion, maybe you can show us some of your work if you think that this one doesn't meet your standards.

@mrnono9800 5 лет назад

Дмитрий Кондратьев A

@roberteddy8025 5 лет назад

The high gloss finish ruined the model, a semi gloss would have been a better finish.

@JohnsWoodenShips 5 лет назад

The model it's not ruined, it is glorious and very beautiful. I chose gloss varnish because i like the way it "brings" out the wood. Also it's far more easy to clean it from everything and there's no risk at all to get spots from the varnish.

@nas4js 4 года назад

@@JohnsWoodenShips After the great gob you did with the kit, putting this varnish it looks like kids toy!! I think that in this cases , we dont put polyurethane varnish, something else that will not hide the waters of the wood! If it is good for you, its okay for me. My opinion and nothing more. Ωραίο το σεμεδάκι στην βιτρίνα.!!

@JohnsWoodenShips 4 года назад

@@nas4js I do not like the matt varnish for a lot of reason. The matt can leave white spots, it's harder to clean and you have to consider that it will be need cleaning even as you build it because the masts ,yards and sails will go on last. But as you said the main reason is the water lines in the wood. The matt just makes the wood darker, it looks cheap and ugly. Το σεμεδακι το εχει φτιαξει η μανα μου!

@nas4js 4 года назад

@@JohnsWoodenShips χαχα, μπράβο πολύ ωραία !!!

@JohnsWoodenShips 4 года назад

@@nas4js Δες και τα αλλα καραβια, το Santa Ana και το San Juan Nepomuceno, θα τα λατρεψεις. Το Bounty ειναι παιδικο παιχνιδι μπροστα τους.