Hobbywing 200 amp ESC V4.1 and V Control Setup: Part 1 of 2

Подписаться 737

Просмотров 12 тыс.

50% 1

I walk thru the unboxing to setup of my Hobbywing 200 amp ESC on my V Control Touch. I go thru updating the firmware, end point calibration, and setting some of my initial settings.
Flight mode setup will be coming soon. Happy flying.
Helicopter as sitting:
SAB Raw 700 stretched to 800 mm with my tail boom mod
EGODRIFT 4530HT510
Hobbywing 200 amp ESC V4.1
XpertRCUSA KD1 Servos
ManiaX 70C 12S5100
V Control Touch w/ Neo running Pro software
Raw, ESC, servos, all available from the fine team at BK Hobbies.
www.bkhobbies.com
Video 2 of 2 located at: • Hobbywing ESC - Setup ...

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@MYHobbyPassion 28 дней назад

Perfect! The first and only video that shows how to learn the throttle endpoints!! THANK YOU for that!

@rchelicopter Год назад

Thanks Greg, just what I was looking for.

@biscaolena 11 месяцев назад

my pleasure sir thank you

@victorfuentes2358 2 года назад

thank you...that help me a lot ..

@biscaolena 2 года назад

awesome thank you and happy flying sir

@shanesherer7628 Год назад

What lower side frames are those? Thanks

@tonychang6739 Год назад

Hi Greg, awesome learning videos. do you have a video on how to load hobbywing esc telemetry on to the vcontrol touch? thanks

@biscaolena 11 месяцев назад

I am pretty sure my videos show that but you basically need the HW telemetry cable which plugs into the telemetry port of the Neo and the ESC. It automatically starts to read the telemetry.

@airman9820 2 года назад

Thanks so much! One question on my old vbar control it announced my battery every 10 percent so far I've yet to figure out how to do that on my touch.

@kyles6466 7 месяцев назад

Hey Greg, did you ever do a 2 of 2 video on this subject to finish everything?

@biscaolena 7 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cwiFP3RquMc.htmlsi=9Kex6Fg5JsvoE9n8

@biscaolena 7 месяцев назад

Yes... I added the link to the 2nd video above.

@mattdbot Год назад

Great video Greg.. Question, I had the wrong pole count in my Vtouch/Hobbywing when I did the negative/positive pitch setting and the when I did the 50% spool up… corrected it afterwards but do I need to redo that with the correct pole count?

@biscaolena Год назад

I don't think so. I think the info saved into the radio merely helps with the displayed RPM. I will research.

@mattdbot Год назад

Thank you and please let me know

@mattdbot Год назад

Any info?

@mattdbot Год назад

Thank you for all of your helpful videos! Any info as to what I would need to do?

@biscaolena Год назад

@@mattdbot I did some asking and I dont think you need to redo that 50% setting. I think the pole count is merely for RPM output. I can try that this weekend myself on my 420 and see how it works. I will report back on my test.