Тёмный

HOBIE HOW TO: Replacing The Hobie Pa12 Dual Steering Line Assembly 

BigBaitPosse
Подписаться 1,7 тыс.
Просмотров 582
50% 1

HOBIE HOW TO: Replacing The Hobie Pa12 Dual Steering Line Assembly. I was out on the lake in my Hobie Pa12 about a week ago and the Dual Steering Line Assembly broke. I was 5 miles from the ramp and thankfully I was still slightly able to control my rudder to get me back to the ramp. I got home and ordered a new line from Sunjammers, a company out of Florida. I pieced together the broken line, using a 150# ballbearing swivel and some simple fishing knots to tie the broken line together and continued to use it until the new line assembly arrived. Enjoy the video. Hope this helps someone out.
Check out www.sunjammers.com/ for all your Hobie replacement parts.
#hobiekayak #steeringlineassembly #hobiepa12
For all your custom painted lure needs contact:
E&H Lures
Watauga, Tennessee
423-791-2431
BigBaitPosse Equipment
Zoom Flukes-zoombait.com/super-fluke/
Bullshad swimbaits-www.bullshad.com/
Dobyns Fury Rods- dobynsrods.com/rods/fury/
Trik Fish Mono-www.trikfish.com/index.php/mo...
Jackson Coosa HD-www.jacksonadventures.com/
GoPro-Be a Hero-gopro.com/en/us/
Shimano Reels-fish.shimano.com/
Power Pro- www.powerpro.com/
Bending Branches-bendingbranches.com/
YakAttack-www.yakattack.us/
ABU reels-www.abugarcia.com/abugarcia-re...
For Business Inquiries Please reach out to us at bigbaitposse@charter.net
00:00 preview
00:12 intro
00:19 video begins
00:53 Hobie rudder lines diagram
14:59 outro

Спорт

Опубликовано:

 

10 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 20   
@BigBaitPosse
@BigBaitPosse 5 месяцев назад
It's not a hard repair, it's not easy either. Hope this video helps someone out in the future.
@RobBassMaster
@RobBassMaster 5 месяцев назад
Great job replacing the rudder cables and an easy DIY guide, Brother! Blessings, Rob
@BigBaitPosse
@BigBaitPosse 5 месяцев назад
Thanks for watching Rob
@davidwilliams1805
@davidwilliams1805 5 месяцев назад
You did a great job replacing it! Definitely not that easy, but doable! Thanks for sharing my friend!
@BigBaitPosse
@BigBaitPosse 5 месяцев назад
Thanks for watching. Appreciate the kind words
@joannericci5981
@joannericci5981 8 дней назад
Thank you for this. I need to do mine now and this video helped me understand what is going on in there.
@BigBaitPosse
@BigBaitPosse 7 дней назад
You are welcome
@JR-rv1ov
@JR-rv1ov 5 месяцев назад
Good video Mike. Glad you got it fixed. Not that dificult but not that easy either...see what you mean.
@pxckbl6883
@pxckbl6883 4 месяца назад
About to do mine here shortly. Really appreciate your video and time walking us through. The diagram is also helpful!
@BigBaitPosse
@BigBaitPosse 4 месяца назад
You are welcome. Good luck
@Basshunter360
@Basshunter360 5 месяцев назад
Glad you figured it out .
@BigBaitPosse
@BigBaitPosse 5 месяцев назад
Ready to fix yours now
@FISHINGWITHFRISBY
@FISHINGWITHFRISBY 5 месяцев назад
Well done
@BigBaitPosse
@BigBaitPosse 5 месяцев назад
Hard to video for sure
@cliff6490
@cliff6490 3 дня назад
Great video appreciate your time and effort, i have a similar problem. I picked up a 2015 PA14 and its in very good condition. My question is on my left rudder side around the tensioner, the pulley that comes off of it, every time i turn the rudder it flops around inside the hull. I have been trying to get a diagram in order to repair it but no luck so far. As you know its hard to work inside the hull and see what should be happening, I would appreciate any info you could provide me. I can send a couple of photos but not sure if it would help you figure out my issue. Thx again for your efforts and camera work. Cliff
@BigBaitPosse
@BigBaitPosse 3 дня назад
@@cliff6490 I’m not sure how those pulleys are attached to the inside of the hull. I know on mine that the pulleys do rotate. I would check and make sure that the line runs through that pulley freely and make sure it’s clearing the foam blocks that are along the sides of the hull. Those lines have to run behind and between the foam blocks in order to work correctly.
@cliff6490
@cliff6490 3 дня назад
@@BigBaitPosse Ok thx i'll try to get a better look Thx for the quick reply
@BigBaitPosse
@BigBaitPosse 3 дня назад
@@cliff6490 if you have pictures you can send them to me and I can take a look
@cliff6490
@cliff6490 3 дня назад
@@BigBaitPosse How would i send a photo on here
@BigBaitPosse
@BigBaitPosse 3 дня назад
@@cliff6490 bigbaitposse@charter.net
Далее
I Don't Get Why People Still Use These Joints
17:26
Просмотров 775 тыс.
ДЖЕФ ВСЕМ ПОМОЖЕТ🤓
10:33
Просмотров 351 тыс.
OG Buda -  Лазерный
02:27
Просмотров 181 тыс.
Kayaking Mistakes That Can Kill You!
13:31
Просмотров 64 тыс.
The BIGGEST Problem With Livescope...
8:43
Просмотров 63 тыс.
You've never seen a camp chair like this
10:16
Просмотров 951 тыс.
The TRUTH About The Hobie Lynx WATCH BEFORE BUYING
13:04
The BEST and WORST Fishing Kayak Companies - RANKED
31:10
WhistlinDiesel Cybertruck Durability Test #1
21:55
Просмотров 16 млн
Testing 8 Innovative New Boat Propeller Designs
24:08