I’ve always been a fan of Collinite waxes and when I seen you showcase this one I ordered it immediately and it was just delivered now just got to wait for the days of rain to past. I’m so excited to apply it thank you for being us great product reviews.
Hi John another great video, here in Australia. We have big details stores that will be the sold distributor that being said. Gyeon is quite cheap here probably along the same price as tw and meg. Now this product is only $40 a bottle which is a little bit more expensive than most but not much.
Because of the high price, I’d love if you could do a long term test on how long it lasts on the shelf. I’m ok paying a lot if I know it’s still gonna be fine to use for several years
@@mattx4253...... Yes £24 is a lot of money for many of us, especially for less than 500ml.... Then you'll have postage on top of it too unless buying a load of stuff
For anyone in America: this currently has a two buck off coupon on Amazon. Brings the price down to 22.99 for 16 fluid jibber jabbers. I'm going to give it a try based on this review. I'm a gyeon wetcoat devotee, but i love trying new stuff too, and this looks awesome. Thanks, Jon.
I would have loved to see this compared to the Meguiars hybrid ceramic wax. With your previous tests, you've found the HCW to be one of the best for hydrophobicity and durability, so it would be an interesting comparison. If Collinite is not significantly better, I'll stick to using TAC Systems Moonlight with either Gyeon wet coat or Meguiars HCW as a topper. All of which were bought thanks to your previous recommendations.
Mine just arrived at Malaysia today immediately I apply it on my car. I ordered it through amazon 2 weeks ago. Super easy to use and hope to see how it perform in Malaysia harsh weather
I'm glad you gave all these a good test, i usually don't have alot of money to buy car products, but i do like to use the best and longer lasting products on my car, i try to chose the ones if they do cost alot, that work the best and i can use them once and awhile because they last longer.Thanks for your review.
Collinite was my first go to wax, 476s and Insolator wax, both great products and very good value for money. Would like to try this, shame on pricing, SIO2 products are expensive though. Would like to see a Snow foam in their range.
yer its actually below the market average for this genre of product in price. dunno felt expensive with what I picked to compare it to. but I have it a group test coming soon.
I wasn't taking these new Colonite products came out but this got me thinking. After years testing loads of products I settled with these which I rotate: Fusso Coat, King of Gloss, Seal & Shine, Sonax BSD and Done and Dusted SiO2. These work well with my 2-3 times a week rinseless wash regime. 😊
U should rly try Stjarnagloss Parla. It beads BSD in durability, which was quite the shocker for me after topping it always after every wash on the fusso coat. There is a video on youtube also with a long term test where it flawlessly survived BSD.
Been using for a while now, so far things are good! Great water behaviour. As for top ups spray on a damp cloth and apply then wipe off. OK yes use and wash cloths , but the cloth doesn't harden as with some others. As for the price point, they do plan to bring out a US gallon size which would half that bottle price, but depends if the UK distributors go for it. [ can get it for under 20 in the UK but what bumps it up is postage ].
Hi Jon, I just finished using this new Collinite product and I would agree with you on this one. What’s your opinion on this up against Koch Chemie SoO2 paint sealant? This was my prior go too. Thanks
Can't find anywhere that has this in stock. Amazon don't have it anymore, and neither do a couple of others that are advertising it. looks like your review has boosted the sales.
I got my bottle of Beadcoat today. I tested it on a panel and found the initial wipe to be a little tacky, but smooths out during the second and final wipe. I was using a fluffy towel and maybe a shorter nap microfiber would help a bit. This product really reminds me of BSD. It has a similar removal feel and crazy hydrophobic beading like BSD. Anyone else see the similarities?
Love that you’re letting your hair grow out Jon👀👌. By the way I’m bald all over like Paul Dolden 👍Never mind I see 2 days later you go a great haircut 👀
Looks impressive Jon! Be interesting to see how it compares to SiRamik Lustrous+ Graphene Spray Sealant which is a very comparable product, priced similarly as well.
Mate the power of your channel has made this product sold out on Ebay and amazon a d most other websites .... can some send me a link to a UK supplier of this as it's sold out if everywhere I look 😂😮
@@ForensicDetailing Happens all the time, once John releases a positive review on a product its sold out everywhere. You have to be quick! I literally cant find this product anywhere in the UK
i use 303 !graphene spray sealant for my focus, because my poor focus lives outside all year, and it has held on for a long time!I find with sealants that have graphene alittle goes a long way!
Looks awesome and will be trying it for sure , at the moment Jon i use Autobrite hardcoat and this is very very good at a lot cheaper price . Have you seen this or tested it ? be nice to know your thoughts on the product .
Looks like a great product Jon. BUT............. When factoring in the cost and a 24 hour cure time, you might aswell just apply a full ceramic coating I think?
the cure time is not a factor really mate. you put it on and you buff it immedietly. all these spray sealants then go through a process of curing but within minutes they cured enough to not really need to worry. its really just a piece of advise so you can max durability out.
@ForensicDetailing thanks Jon. That is interesting to know. I'm formulating plans for what I want to do in preparation for my new car when it finally arrives from the manufacturer.
I'd love to try this. Can you put it over a ceramic coating? All my cars are currently coated, so probably don't need this. Although one of them is coming up for 4 years, so could probably do with a top up anyway.
@@laurapalmerTDGE On one motor I have Gtechniq, and the other has Gyeon. The Gyeon one is only a couple years old, and still looks quality. The Gtechniq is coming up for 4 years now, and while still good, and obviously still there doing something, it probably needs a top up.
Looks like a great product 👍🏼 How is this different to the spray on rinse off type stuff, like BH Touch-On? Looks great to use, but I’ve been impressed with the longevity of Touch-On, given its ease of use. Cheers, GaryB
Probably!what is it? The best lager in the world more to the point am I being a bit of a spotter when I’ve got a good wax on there? Do I need it? Really?
Hi John, did u had a chance tried a OPT Optimum Ultra CERAMIC Seal ?? if not I think you will be much more amaze with hydrophobic and especially with slickness and durability plus this product really boosts colour of sprayed panel. 6 months last if diluted 1:1 3 months. Your BMW will be shine like a star :).
@@ForensicDetailing yes you right, next time when I go on holiday I will bring more bottles and if u interested I can posted to you a bottle on me for you, I`m sure you will be very amaze, also you will have opportunity make another honest video about this sealant, I think you enjoy making those videos and tests.
@ForensicDetailing Well, technically, it's yours, haha 😄. If that video hadn't dropped there would be loads left.....but then we'd probably have never known how good it was 😉
C2V3 have the potential to last about a year in real world conditions. Another youtuber did a longterm test with it and many other products on a bonnet. Would love to see an indepth comparison with Collinite ceramic spray and the other class leaders.
impossible to answer without testing. but its the ease of use and the feel of it as it goes down on the paintwork thats ace. And then after this the protective performance is top draw. Just try it. Goes on like silk.
Is there an alternative i can buy that isnt put on and washed off like the others, i like the idea of me needing to use a cloth etc to put it on with. Meguires hybrid ceramic wax would have been my ideal choice but not the idea of spraying on and jet washing off.
Any tips on how to use it, eg does it need time to harden? I have used it and found if you touch it after with anything harsher than a micro fibre cloth, it marks?
no mate spray on spray. buff. thats it. dont wash for 24 hours. I dont know what you mean bu it marks. If you touch, clean glossy paint you will leave finger prints in it. If you mean your scratching it afterwards when you touch it then thats not a product thing mate.
it will interfere with any surface you put it on mate. It will shrink any mineral desposits there and leave a layer or PDMS on top which will alter hydrophobics of the base layer.
@@ForensicDetailing thanks for the reply mate, this really looks like a solid all rounder, nearly purchased ahead of your video last week, now I can’t get hold of any!
for beading that combo is damn elite. but BSD is some horrible parafin wax emulsion. apply it. wait a couple of days and theres like a white dry dead look to the paint.
@@ForensicDetailing yeah i saw ur recent video about it where u said that. :( Once again btw, ur channel is the best John! Ur character is enjoyable to look at. :D
someone else said it recently in the comments and it was reassuring because its a subtle thing and you never know if its like something else causing it. but yer I find it adds an opaque thing. I still have a bottle of it though :)
@@ForensicDetailing im testing Stjarnagloss Parla at the moment versus sonax bsd after a test i saw on youtube where Parla beated BSD. Its an obsession John. 🙈 Testing it as we speak on top of fusso coat on my own car. Lately im also kinda liking sheeting more than beading. While its a feast for the eye, i dont like all those drops dried up waiting for me after work. 😂
Hi Jon, I’ve been using bead maker for the last couple of years I really like the gloss and it lasts months for me in U.K. how does this stuff compare and can I put it straight on over the top of bead maker ?
@TD5rage presuming you've never applied a coating before have a look at gyeon can coat and carpro lite for the paint, wheels and metal work then gtechniq c4 for cab plastics and something like tac systems moonlight for the chassis, mud guards and spray suppression etc