Eaton piston motor 74315-DAW is the part number for the saw motor. Thx for watching if ya like seeing wht in into subscribe. Im going to be trying to add one video a month maybe more if it goes well. Thx again
Awesome build one question with the exhaust set up you may be forcing exhaust air back into each engine the way they are plumbed together in line if you find you lose power might look into that.. if not awesome build…
Hi very good design you put a lot of thought in the process just wondering what kind of conveyor chain you used been trying to find something that will handle the log weight and pressure thank you
The main chain and log deck chain is 2100 pitch chain. 100 pitch chain with double length links. So we made regular 100 pitch sprockets with a odd number of teeth. So the whole sprocket will wear evenly. I used 1/2x3/8 flat bar for the chain to run on so it used the rollers to carry the heavy loads and still move ez
On the 2 vtwin engines are 15.5 gpm each and the 13.5 hp is a 6 gpm all at 3600 rpm There is a small plc made that would automate it that runs on 12vdc from Allen Bradley.
@@willcullen8415 I would only automate the return of the cylinder and probably only use a relay to do that and a limit switch. To many variables in wood to fully make it run hands free in my opinion
