Homemade 300cc TANK / PART 3 ( Tracks ) 

PART 1 : www.youtube.com/watch?v=rzMGy... PART 2 : www.youtube.com/watch?v=xjxMV...

Есть минусы НУ КОНСТРУКЦИЯ ОЧЕНЬ ИНТЕРЕСНАЯ И КРАСИВАЯ, ЕСЛИ СМОТРЕТЬ ПО ЮТЮБУ НЕКОТОРЫХ ТОВАРЕШЕЙ..... ГЛАВНОЕ ПАРЕНЬ ЗАНЯТ, НЕ ГУЛЯЕТ НЕ КРАДЕТ И НЕ ПЬЕТ👍👍👍👍👍👍👍👍👍👍👍

Жена, молодчинка, помогала 👍. Моя бы меня из дома выгнала 🙄. Конструкция гусениц очень тяжелая и плохая. Эти сырые болты на 8мм сожрет через пару киломестроа. Все это делается элементарно их 40го уголка. А у нас, в Якутии, вообще пластиковые гусеницы делают любой ширины, длины и профиля 😎.

I am ex-military and you need a adjustable idler wheel are you will always breaking your tracks

From ex-British tank recovery mechanic. Damn good effort and hope you work out any faults 👍

idk why people are hating on this dude. i mean cmon, the amount of time spent on the tank is long. and most likely you cant even do something better or the same. "bad craftmanship" yeah pal, really "bad" also this isnt a tank factory. its a garage.

Don’t let anyone’s criticism bother you. Every project is a prototype. A single unit only. I’m building a project too but I continue to modify it time and again. You have great skills!

Видно,что парень трудолюбивый,столько энергии и оптимизма! Жаль только,что такие трудозатраты и металлоёмкость гусянки, не оправдают себя! Километров на 100 пробега хватит,потом вытяжка, и как следствие несовпадение зубьев звёздочки с траками. Все эти болты и отверстия соединительных пластин , песок и грязь разработают как наждак......

Been looking at lot of different track designs and I really like this one so far, looks fairly simple yet very effective.

Excellent work. Machinist tip: When you have a lot of repetitive work, build a jig fixture to position the work in so you do not have to measure every single piece. One for your chop saw. One for your drill press.

Great progress! You obviously have the drive to see a project like this to completion! Do not worry if you have to make changes, engineers are always updating their designs as they go.

Pro historical tip: if you want tracks to be more secure, you have to add small dots to every part of track as well as to every wheel add a little hole trough witch the wheels will push the dots and thus push the track as a whole. Look up tracks in tanks like: german panzer 3 or some newer tanks like Abrams and t70. Still great job and keep it up. Can't wait to see the final version.

How are the tracks going to be driven? There needs to be spokes or similar for the drive wheels to make the tracks move. Smooth wheels will just spin inside the tracks.

Hell man, I have never seen someone work this hard. I hope you are making a lot of money through youtube. You really deserve it! I completely love your work. Never stop. Greetings from South Africa.

Золотые руки! Браво парень!

Man that's some major amount of work on the track......it will definitely kick up the grass crazy cool

I've no idea what you will do with this when it's finished but I am so impressed with your ingenuity, perseverance, fabrication skills and business acumen, well done.

Your fabrication skills are incredible.

I wouldn't have used that particular way of connecting the track links, but in this case those slightly dome headed bolts, similar to a stove bolt, would more than likely work and stop the binding of the hex headed bolts.

Watching you make the track I can't help thinking you have a lot of guts taking on a job like this. I can't wait to see the finished product.

Ive been watching your channel every night for the past week. You are amazing. I want to build this. Thanx for your videos.. Very inspiring

This is the stuff we dream about doing but never get around to it ! You are doing it so we don't have to ;-D So much work , I admire your perseverance, keep going Buddy

Looking forward to part 4. Nice work, very interesting. :)

I love how at 10:00 you have a glove on the hand holding the tool but not on the hand holding hot piece of metal that is next to a disk that is spinning incredibly fast :D but I still applaud the dedication

Young man, I really salute your tenacity and pure skill with this ambitious project !

Wow that looks like a very tedious process, glad I'm not doing it lol! Love the videos

С выступающими болтами будет проблема. Надо было их делать заподлицо. Но за труды лайк!

That's an incredible amount of work, well done!

im very impressed with the amount of ingenuity within this series so far, cant wait to see the finished result.

That's absolutely amazing to me and wicked. Amazing talent!

Looking good. Looking forward to seeing it completed. Good building skills. 👍

Nice work so far and thank you for the inadvertent reminder to order some more sanding flap discs for my own grinders

There's no sprocket/cog so the the tracks will slip, the middle of the frame needs cross beams for reinforcement and it needs mudguards.

Nice work man, keep it up. I’ve always wanted to build a tank, and this video might help. Thanks!!

you should have used carriage bolts they won't hang up on the rims as much.

this is actually what i need in life, been thinking of a project like this for years but ive never been able to make a start on getting or buying equipment capable of doing so.

You are gaining skills at an early age that will serve you lifelong. Kudos to you !

This guy had to have been a tank engineer in his last life.

Looking great! are you going to put a tensioner system on the tracks? another idea that would reduce noise might be to add rubber pads like bigger tanks. Still, your project is very impressive and I can't wait to see how it all works out.

A childhood dream coming true. GREAT WORK!

Some awesome skills, serious patience! Thank you!

Maybe put some bolt tensioning adjustments on the idler wheel to keep the tracks tight? Idk, looks like it’s going to work great the way you have it

Suggestion; tack weld every one of those track nuts and bolts. I foresee them failing under use otherwise. Putting those tracks together is something that I would definitely subcontract out.🤔

Young man you one of the best loved nice work keep going forward👍👍👍👍

Many blessings upon whoever added the English subtitles. Fantastic project.

парень конечно молодец ,трудолюбивый ,про конструкция ни о чём ,соединение на болтах в профеле ,это просто (нет слов)

How do you intend to drive the tracks. The low surface contact and metal on metal contact will just let the drive wheel spin out in the track.

I can't wait to see that beast finished !! incredible projects

I have built a lot of things on RU-vid and seen a lot of things built but a tank LMAO 😂 good job man 👍 absolutely loved the build well done👏👏

Good job man. Until here. But, i ve two questions: 1 - How do you intend to transmit engine powering to tracks? You don´t have theeth insite of tracks or wheels. 2 - Your project is getting heavy weight. Witch kind of engine (s) do you intend to use? Congrats for your work. Cheering for you! Yuri, São Paulo, Brazil.

I don't know about an idle wheel.. I think you should have an idle wheel that's spring loaded so it keeps the track tight.... I have a feeling when you get this built the tracks are going to come off when you try to turn this thing... VERY COOL IDEA I absolutely love it.. can't wait to see it when it's done... I have a great idea but nowhere to build it so I have to just hold off for a bit.. but good luck to you, keep going...

Holy crap that is huge amount of work!

BRAVISIMO!!! Не спешите делать вывод, ещё не финал... КЛАССНЫЙ ПАРЕНЬ!!!

God dam that's a lot of work thumbs up👍

Legend has it that in Slavic countries all screens are tilted to a 45 ° angle so every video must be shot in alternating 45 ° inclinations. Or maybe it's just that his tripod is missing a leg ...

He has the tools, he has the talent. Nice work!

Amazing work, loving the build.

Respect from France brooooo its amazing !!!!!

Ну, бери еще троих в команду и собаку!))) Отличная работа!

That's a lot of work! Well done!

Wow! That is a lot of work! You just earned yourself a subscriber.

Really like how far you've got with this. I like that your trying something different and want to see how it works when it's complete. How and where do you plan to use this, or is it just to build it? Very curious about how you plan to deal with the following things, 1) suspension 2) track tension 3) drive sprockets 4) track stiffness

E kralju. Nemoj snimati izradu druge gusjenice jer je to isti video kao i ovaj te tako nebi nitko gledao taj video. Za 4. epizodu snimi izradu pogona, a drugu gusjenicu nemoj. I molim te da za oklop tenk ima debljinu željeza kao i debljina metala od gusjenice. Zakon si kralju i samo tako nastavi.

That's amazing! Good Job!

My respects to this guy👏! So much hard work. Good luck to you from Georgia, Caucasus.

That's awsome. Still need a drive wheel and an idler wheel

Sehr schönes Projekt und bis jetzt passt alles. Mir gefällt es sehr gut 🤘💪👍🇩🇪 Grüße aus Deutschland

Quel travail de fou ! J'ai hyper hâte de le voir fini !

I feel as though you heeded my advice on the rim bending. Good work on the renforcement, not entirely what I had imagined but I think that should do as long as in the end it doesn't end up crazy heavy.

Svaka ti čast mladiću , evo kako se mlad čovijek može dokazati , divno i samo hrabro ...

Well, this is the first thing on this tank that actually works as intended, so kudos to that. And since you just use car rims, a centerguide isnt necessary, but if you dont add a drive sprocket to drive this track, you´re in for a disappointing experience. Just throwing it out there, if you dont know.

Nicely made for the conditions.

Good for you son for following through with you dreams ! DREAM BIG !

I don't always wear a tracksuit. But when I do, I build tanks.

Pretty cool, just needs a tenion wheel to adjust the trakes

This is becoming such a great invention, keep it up!

Can't wait to see this project done bro 💯

the connecting Links are the weakpoint of the trackchain construction. Take the links weld round steel bars in there . Make solid trackchainlocks out of 3times the thinkness of your current ones with 2holes for the bars and connect the holes with a slit.. drill the Locks 90degrees in the middle and thread one side for the screws i know its much more work but it will last and wont end with some seriuos injuries. Rotating metal pieces are realy dangerous. Look at some real tanks their track construction you need to copy as best as you could for stiffness and torsion stability. A steelbar should be welded to the tracks to give them something to grip into the ground otherwise it will tent be very slippery and in combination with a thoothless drivewheel has the potential to kill you and /or someone else too.

чёт я не понял, а как ты будешь регулировать натяжение гусеницы? Тебе нужно продумать систему с выдвижением переднего ленивца

Thanks for sharing such wonderful content with your audience. It is very interesting stuff. I appreciate all the work put into it. Sincere thanks!

Dude that's so bad ass. My kids and I love your project cant wait for the next videos.

great work!!!

Хорошо когда есть руки и столько свободного времени. Единственное в первый же выезд Гусянки рассыпяться.... Не так они делаются....

sensational bro I already wanted to see the video success and you have my like man

There is no way to move the idler wheel to tension the tracks. This may be a problem

Brother you are too much hardworking & too much passionate towards work I like your project may God bless you dear more happiness & healthy ! 📊📊📊📌📌📍📍🗄🗄🔨🔨📎📎🖇🖇📏📏📐📐📐🛠🛠🔩🔩🔧🔗🔗👏👏👏🖒🖒🖒🖒💖💖💖💖💖 💯 ✔✔

履帯だけで途轍もない手間、金掛かってる。 凄いのは大した設備が無いのにこの作業をしている事。 戦車への愛を感じる。

Amazing work 👍

Ацкая машина получается по всем показателям как по финансовым так и трудовым

это просто смешно декоративная поделка, а не танк русские не одобряют!

I have to say, you have peaked my interest. I am not sure how you plan to drive the tracks yet, but I am sure you know how to do it. I will be waiting for the next installment for sure. Thumbs Up!

Is this going to be functional? are you planning a tensioner for the tracks? and how are you planning to keep the road wheels from sliding around in the bearings?

Brilliant young man with super mechanical craftmanship...... ......! Well done......

A better idea for the bolts on the track would be carriage bolts. The domed heads would not have the friction that the hex bolts do.

Loving this project, so I just subbed, greetings from Australia.

ممتاز 😉 واصل العمل فالشوق إلى رُؤية هذه الآلة في صورتها الكاملة صار كبيرًا 👏👏👏👍👍👍

Could you add translation again like the first two videos. Thanks

This is a project of imposing respect.

Coming along nicely ! Young man you got skills ! This build is awesome !

That's amazing! Congratulations man. You're very intelligent