Homemade Motorized Camera Slider

Подписаться 79 тыс.

Просмотров 130 тыс.

50% 1

How to make a Professional DIY Camera Slider- Arduino Projects
In this video, I show how to make or build a Homemade but professional DIY camera slider with an Arduino microcontroller. This DIY camera slider has 2 axis which gives good cinematic shots for your project. The complete cost for this project is below $150. You can download the code for this Camera slider from my website. This Professional DIY Camera Slider is simple and easy to follow. The links for the parts are mentioned below.
Instagram- / shinedjar
Facebook- / rztronics
Twitter - / rztronix
Code & Schematics for Arduino Camera Slider-
github.com/RajPShinde/CamSlider
*NOTE* - To install Libraries follow www.airspayce.com/mikem/ardui...
Parts for Arduino Camera Slider-
Stepper Motor- s.click.aliexpress.com/e/sBZxA3e
A4988 drivers- s.click.aliexpress.com/e/cS3zuHcG
Arduino nano- s.click.aliexpress.com/e/7FwwIwM
GT2 20T Pulley- s.click.aliexpress.com/e/eYLkLq0
GT2 Belt- s.click.aliexpress.com/e/9OUiGVw
GT2 40T Pulley- s.click.aliexpress.com/e/rqL7Ki4
Oled Display- s.click.aliexpress.com/e/bCZPFBoy
End stops- s.click.aliexpress.com/e/cjuQVDKC
Encoder- s.click.aliexpress.com/e/D2FnBbS
LiPo Battery- s.click.aliexpress.com/e/dyzWry8
Bearings- s.click.aliexpress.com/e/c1L0J1TE
Derlin wheel- s.click.aliexpress.com/e/cOefA0SG
GT2 200mm belt- s.click.aliexpress.com/e/c2zR6AsY
ball head camera holder- s.click.aliexpress.com/e/bsmmrfT2
Aluminum 2020 extrusion- s.click.aliexpress.com/e/cfCegHRw
Tevo Tarantual 3D Printer- s.click.aliexpress.com/e/bLlqkdEo
3D Printer Filament- s.click.aliexpress.com/e/buxed708
Music-
Lowrider by Joakim Karud
• Lowrider by Joakim Kar...
Iaan - Don't Go
• Iaan - Don't Go
#arduino #diy #homemade #camera #electronic

Наука

Опубликовано:

8 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@HootBuilds 4 года назад

Wow, this is a super nice 2 axis camera slider. The turn dial / push to set programming is a really nice touch. Truly inspiring. You should be very proud to be so creative.

@princebanini 4 года назад

this was beautifully done. Great work RZtronics

@DecadesDiner 3 года назад

Awesome project. Like that you started the video with slider shots.

@GeekDetour 3 года назад

VERY NICE project! Awesome video results you got - congratulations! 🎉🎊🎈🍾

@shadrackdeveloper Год назад

Damn...never knew one video could open up my mind to so many possibilities! Very Practical.

@DianneStudio 4 года назад

Awesome project... I want to build this one... Thank you so much RZtronics... One suggestion to add a fan in the control box for the drivers then it will be perfect... Cheers...

@sitgesvillaapartmentneilsc7924 3 года назад

One beautiful slider I would even consider buying this its so bloody good.....

@cdeezphotoz 4 года назад

I have had a similar design to this one in mind FOR MONTHS now. T-slot is a great and inexpensive option that also has great structural stability. I am recylcing parts from a 3d Printer and a Telescope so I can mount a 120mm refractive scope, or a caged camera/ gimbal onto it for motion lapses/ Star shots. Thanks for the video! I appreciate this insight. I have been trying to rack my brain aroung cable management. You have solved my dilema. A single t-slot down the middle of my design. (I am using 2 3/8" and 2 1/4" rods for my railing system to provide as much stability as possible. ) Using the parts I have from each gives me the stepper motor need for my Belt drive, by I plan on using the existing pan/tilt electronics and encoder motors from my telescope to provide a badass optics platform. After the initial hardware/coding works, I will be printing casing for the components to shield them from the elements.

@Jestunes 4 года назад

Thanks for being more realistic with the cost of the materials used.

@luisfmts Год назад

So satisfying to watch!!

@naspotter7107 4 года назад

Nice! Hope you come back with more awesome diy project

@blobbenfinns 4 года назад

Software works just as it should... Going to design my own slider hardware in Fusion 360. Big thanks for the sourcecode!!!

@DianneStudio 4 года назад

The software works for me too. thanks for RZ. my only issue is the jerky and bouncy position adjustment with the rotary encoder. If you don't mind will you able to help me. I tried different delay options but still very jerky and bouncy rotary. Thank you

@dennisgaatjeniksaan2132 3 года назад

i would pay for a step by step tutorial for beginners

@electronic7979 4 года назад

Excellent project 👍

@Excalibur32 3 года назад

Nice looking project!

@ng-marc 3 года назад

Well done! Thank you

@raulguevara1944 4 года назад

Waw!! Very very nice! It's percect!

@charlieross-BRM 3 года назад

Good choice of construction. I have a different Arduino slider kit and it isn't very sturdy plus it has some jitters so I want to rebuild it with extrusions. Capturing the main rotation bearing inside the platform with a bolt down plate is the first time I've seen how to do that. My kit is a pressure fit of the bearing to both the carriage plate and the camera base over the bearing which IMHO is nonsense. Finally, that's an interesting calibration you programmed, having separate start and end aiming points for the Y value.

@StuffIMade 2 года назад

Great job! Beautiful design! On the wiring diagram, it shows a 12v and a 5v inputs, did they both come from the single battery?

@thamomentum 3 года назад

Dude Holy shit. That was done so damn cleanly. I'm working on something like this for the Ender 3. For timelapse and it's driving me crazy

@tecktube5713 2 года назад

Can i Get #D files

@samda7109 2 года назад

wirklich sehr schönes projekt 👍

@popup9979 4 года назад

Really Superb👍

@isnulljson9343 4 года назад

awesome!

@3cm648 3 года назад

Nice video ! Thanks for it ! Thumb up ! Wanna make one, do you have a full tutorial video pls. A lot of part not clear and miss out...like you use a transistor but not sure which is that . Thanks !

@ostDE 4 года назад

nice job!

@kopi3197 4 года назад

3d files/stl could you upload ?

@mountainsprings3303 5 месяцев назад

Great video thanks for sharing

@stevesfascinations1516 4 года назад

Nice build! Total time required 1 billion hours, I wont live that long, but I did enjoy the video.

@fxsrider 3 года назад

I checked on the extrusion from the link you provided. Estimated delivery was April 14. Today is February 10. Really cool project! Have you ever tried to slap the DSLR on it? I would think it's easy enough to scale up to handle the larger weight. Thanks for sharing!

@ashishdmc 3 года назад

Wow! That's a great project. Thanks a lot. It very useful. cant wait to build one for myself. The code works great. I am a filmmaker and DOP and based on my experiences I have a few suggestions. 1. Could you include Acceleration control input as well. I read that the Accel Stepper library supports that. 2. An option for the third motor will be great for the Tilt function. 3. Can you have a menu with an optional function to bounce continuesly between point A and B for Interviews in a loop 4. As an upgrade it would be wonderful if you include the AS5600 Encoder module with magnet for marking positions. Manually positioning the camera is always a better option for Cinematographers. 5. Lastly can you also extend the code for a camera lens focus focus motor. Thanks again for this wonderful project.

@attic6 2 года назад

yip!

@LambertoDeSimone Год назад

Hello, that’s a wonderful project. Congratulations 🍾. Is it possible to have a step by step tutorial to build it ?

@VIRAKBODA 2 года назад

Perfect

@user-hu2cj1mh6c 3 года назад

И ещё идеально было бы, плавный старт и замедление в конце движения. Если это не очень сложно то сделайте это. Спасибо. And it would also be ideal to have a smooth start and slow down at the end of the movement. If it's not very difficult, then do it. Thanks.

@mlassz009 Год назад

Impressive

@Kainwota 2 года назад

Very helpful. Thank you. Has anyone built a 3 pan modification?

@taimaishublm 3 года назад

excellent, but is the choppiness due to the stepper drivers? or just stability. thanks

@Geoffreyinoz 3 года назад

Nice, shouldn't be a problem if you have some knowledge attempting this as a DIY.

@lucianorascano7384 2 года назад

Hello!! Arme el slider...el riel es de 100cm...pero el código permite que use 50cm...dónde puedo modificar la distancia?? Está muy bueno !! Gracias por compartir!!!

@aspmos Год назад

Great, I have NO NEED for such a thing but still I want to build it.

@SAMURAIX9909 4 года назад

Hello sir I'm using 3 motors (3 axis) Can I modify this code sir I like the way you control the motion

@tchaoboy 3 года назад

Nice work :) how slow can u make a travel with that?

@pkasra 4 года назад

Great job! Thanks for sharing. I see a lot of shake and wobble in your first previews captured by the slider and it scares me. Is it because the belt being loose? Or the wheels are not in good grip the extrusions profile?

@MrMaxStalsky 3 года назад

it's just poorly made. Too loose construction. Stepper motor speed is too high. A lot of things. But nice try.

@SaptarshiSikder 4 года назад

Which software u use for video editing?

@3cm648 3 года назад

hi, may I know where can get the STL ? thanks

@caballerosporsudamerica 4 года назад

Exelente

@mem5922 4 года назад

Didn't see what component(s) used that allow the platform to slide on the 2020 rails. Are there internal wheels or so something?

@ahmedmohsen5471 4 года назад

انا اول مشاهدة ههههههه

@tuday5783 4 года назад

hello , the link to have the code is dead , can you re-upload please ?

@franksemi_modular 2 года назад

Look great and I wanted build one, but could you please update the aliexpress links with info on what to buy. fx. "GT2 20T Pulley" don't really give an accurate description on what to choose when going to the link gives you lots of choices like 20T W6 B6.35, 20T W6 B8, 20T W6 B4, 20T W6 B5, 20T W10 B5, 20T W10 B6.35 and 20T W10 B8. Same with most of the other tings.

@ahmedelsharqawi3801 2 года назад

Great work .. amazing.. My i ask for the 3D (.stl) files ?

@Ritefita Год назад

What are capacitors for? To stabilize voltage on motors? Why?

@franksemi_modular 2 года назад

..and where is the STL files for the 3d prints?

@ignomagine9601 2 года назад

We manufacture such sliders and guideways for your DIY projects :)

@walterpryszczuk5007 2 года назад

Funcionará con el NEMA 17HS4401?

@Escultor333 3 года назад

Hi, what resistance use, 5 minute in the video?

@junbuhay4599 2 года назад

Nice one!!! I just wonder if I could have a copy of the 3d files.. TIA..

@toncyjohn3362 3 года назад

Could you please upload/share the 3D printed parts stl files?

@PirateZomby 3 года назад

Seconded!!!!

@xtreme8bitschannel 2 года назад

Hi, how to make it go between two points in a loop?

@Panals1 Год назад

Congratulations on your work. I have placed all the components on a PCB board. Everything works very well and as you predict with one exception. Rotary encoder turns upside down. Reversing the numeric values (PinCLK 3) and (PinDT 8) to (PinCLK 8) and (PinDT 3) does not work at all. Of course I also change the (attachInterrupt (digitalPinToInterrupt(3), Rotary, RISING); to attachInterrupt(digitalPinToInterrupt(8), Rotary, RISING);. Also shift pinMode(PinDT, INPUT_PULLUP); one position up but the motors remain dead. As far as I know, the position of the pins on rotary encoders is not a critical issue. I can't figure out what exactly I'm missing. Can you help? Thank you very much.

@sagarbiswas4331 3 года назад

Can you says all details equipments you used to make that

@edgarjacobocarretocortes9885 4 года назад

No tiene en venta?

3 года назад

Hi, do you have the project of the components printed in 3d, the support base for the camera, the support base for the slider, and the box? Is it possible to send it... A great work you did there, very simple and well elaborated...

@EnviousMods 2 месяца назад

I need them too!

@eduardoanonimo3031 4 года назад

Reupload or dejavu?

@Grasperr1 4 года назад

Anyone has made a complete component list maybe? Like exact components, and the number of them? I am a bit afraid of ordering and missing some parts, then having to wait a month or two more, for rest.

@kenukir4601 3 года назад

Hello, thanks a lot for sharing design and code, I have tried to replicate it with few design changs, can you please clarify the component and wiring on 4:57, it's not on the schematics you provided,

@duncanmascarenhas8155 3 года назад

That's a voltage regulator to bring down the voltage to 5v from 12v.

@markmedia8252 3 года назад

It would help if you can supply the stl files

@hikmetcanibic7103 4 года назад

I taked everything but what missing guess? 3D STL file what i do right now.

@tuzelkisilik 4 года назад

hard to understand the construction albeit it's so beautiful to design and realize.

@MrMaxStalsky 3 года назад

It's not hard. It's just modern people are too dumb and lasy. You can learn all that stuff with just RU-vid and google.

@adolfogazzo5966 3 года назад

Hi, Sorry for the question, but I'm trying to build your Slider, and my Arduino IDE can't fine the file MultiStepper.h. Where it is?

@walterkuhl4978 3 года назад

Hello great video, great work a question why only one switches off? Thank you

@duncanmascarenhas8155 3 года назад

What do you mean?

@walterkuhl4978 3 года назад

@@duncanmascarenhas8155 limit switch yes only on one side slider

@duncanmascarenhas8155 3 года назад

@@walterkuhl4978 because the limit switch is used to only bring the gantry plate to the home location. After that, you have to set the distance for it to travel. it will travel only that distance and return to the home position.

@walterkuhl4978 3 года назад

@@duncanmascarenhas8155 ok

@tonyklintasp9369 4 года назад

Hi, your web is down, any other download option?

@user-hu2cj1mh6c 3 года назад

Привет. Интересное решение. Хотелось бы иметь не 1 проход. Иногда нужно пройти с лева на право а потом с права на лево... возможно пройти 2-3 раза... не меняя параметров движения. Можно ли в программу внести добавление этой функции. Нужно добавить в конце каждого прохода меню, в котором будет 2 параметра. вернуться или сброс... Спасибо. Hi. Interesting solution. I would like to have more than 1 pass. Sometimes you need to go from left to right, and then from right to left... it is possible to pass 2-3 times... without changing the movement parameters. Can I add this function to the program? You need to add a menu at the end of each pass, which will have 2 parameters. go back or reset... Thanks

@EnviousMods 2 месяца назад

Where can I get the stl files as I've got almost all the stuff to build this. Thanks!

@tico1518 4 года назад

Hi, could you send me the 3D print file?

@tomseim 3 года назад

Why don't you post the stl files of the parts?

@fabpx 3 года назад

Can you kindly give the STL files for this project

@villarsrl 4 года назад

could you post the code? the link to the page is broken.

@sharonbaab3101 4 года назад

Is there a version that does not involve a 3D printer. I don't have a 3D printer and I don't know anyone who does.

@LeeBreece 3 года назад

What would I have to change if I wanted to make this but longer? @RZtronics or anyone else

@duncanmascarenhas8155 3 года назад

Nothing. just the rails and belt

@makewithmegma 3 года назад

❤🔥👍

@ONZH 4 года назад

No MultiStepper Libraries!

@nmprathap 3 года назад

can I buy it

@umangseth 2 года назад

not able to download library plz help

@borntoinvent1197 4 года назад

why u r not using u r own 3d printer

@TechFreakGOGO 4 года назад

Hey please can you send me the stl files and code?

@tico1518 4 года назад

The Link for the Arduino Code isn´t working

@DanielBondesam Год назад

where are the 3d files? someone got it?

@raahimirfan5996 4 года назад

4:38 How much will this soldering iron helping hand cost?... I wanna have it..

@route-249 4 года назад

About 8 bucks on eBay, just look for helping hands

@raahimirfan5996 4 года назад

@@route-249 OK... Thanks a lot!

@AncorOjeda 3 года назад

Can you publish the 3d model?

3 года назад

Hi, i can use 28BYJ-48 motor?

@RZtronics 3 года назад

Yes, But I am not sure if A4988 supports that motor..

@CadAxe3D 3 года назад

Has anybody tried connecting everything Arduino r3? And there is no mention in the schematic drawing for the mosfet, any idea what and how to plug it in and the values etc.

@pj8979 3 года назад

Ok I have figured out the mos is to dip the v from 12 to 5v. I still cannot figure out why Arduino Uno doesn't work.

@CadAxe3D 3 года назад

lm7805 voltage regulator

@CadAxe3D 3 года назад

I am stuck on the endstop, is it always on state and when it homes is it off?

@pj8979 3 года назад

@@CadAxe3D figured it out, using 3d printer endstop 5v in ground and grin cable in the pin 11. Works great.

@sardarramezani9081 4 года назад

hi,please give stl files and source code download linke

@Escultor333 3 года назад

what voltage are the capacitors?

3 года назад

16v

@ahmedmohsen5471 4 года назад

ممكن ملفات الطباعة بعد ازنكstl

@algotrading-tradeapp6186 3 года назад

Can we buy from you

@onurcaglar915 4 года назад

share 3d stl pls

@lulle621 4 года назад

First sout out me

@RZtronics 4 года назад

Hello!!

@naspotter7107 4 года назад

@@RZtronics hi what happened reposting this video after so long time , hope that you are fine and will continue to make awesome diy project .

@CC-zv3pj 4 года назад

Hello! Thanks for this proyect, it's amazing! I've a question: in minute 4:57 of the vídeo appears a small black component that is not in the schematics...what is this?is it necessary? could you share the reference? Thank you very much.

@fredericfitaire2073 4 года назад

5 Volts regulator I guess (ref 7805 or similar) to create a 5V from the 12V of the Lipo battery

@smackdaddyy 4 года назад

@@fredericfitaire2073 do you know whats the amperage and the discharge of the battery? it would be appreciated. Merci de Montreal ;-)

@fredericfitaire2073 4 года назад

@@smackdaddyy I'm not the owner of this project but from what I can see at 7:35, it seems to be a 3S Lipo battery. Not very big, probably around 1200mAh. But I can't see the capacity value ... Maybe a 15 or 20C ? Meaning the battery would be able to provide 10 to 15A continuous current. But the stepper motors probably needs less. Bonjour de Paris !

@smackdaddyy 4 года назад

@@fredericfitaire2073 Merci, j'aimerais bien faire ce projet mais je dois m'assurer d'avoir les bonnes pièces. Alors comment va l'isolement à Paris?

@kenukir4601 3 года назад

Hello, any idea on how to wire the voltage regulator?, if it indid is a voltage regulator