Homemade Pipe Burner | Useful Knowledge

Подписаться 66 тыс.

Просмотров 238 тыс.

50% 1

Homemade pipe burners are simple and easy to make. Our pipe burner build instructions use four parts. Pipe burners can be used for many applications. Our propane pipe burner is going to be used in a syrup cooker. It really does put out some heat!
This DIY pipe burner for propane build parts which cost $130 total are pipe, venturi, cap, and orfice.
We show you the easy to build a homemade pipe burner from start to finish. With a little work and using our DIY propane burner build instruction, you can build the burner in about an hour.
Man with the Knowledge: Jamie Hardy
Editor: John Andrews (UberonN)
Creator: Mark Davies
Email: useful.knowledge.tv@gmail.com
Bama Country Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
Homemade pipe burner build instructions make it simple and easy to build.

Хобби

Опубликовано:

10 июл 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 138

@markadams2447 9 месяцев назад

That video is a great help I'm building a boiler for a small steam engine and your system looks perfect Thanks for taking the time to show this Mark

@Jabba53e 4 года назад

Been looking all around for this...I'm a gunsmith and need to build one for my bluing tank...this will be perfect. THANK....YOU! Quick and too the point.

@useful.knowledge 4 года назад

Pappy Boyington. Thanks! I built three. They are all working great. Those Tejas Smoker venturis work great. The pipe was 1 1/4 inch.

@Devoneakapimp 3 года назад

Thank you! Really, thank you

@edrickcolon2516 3 года назад

Well done job! 👍

@zeerekgman945 4 года назад

Great job. Very informative. Thank you for sharing it.

@guisseppebm 2 года назад

Great video. I am wanting to make a pipe burner for my pig rotisserie. Is there a formula for how much heat it will create? I kinda need it so it will get hot. Is there a way to get bigger flames and or more heat? Any advice would help. Thank you!

@hussainali9999 3 года назад

Thank for sharing

@tristantaus4556 3 года назад

Almost like a system for an oven! Cool!

@tristantaus4556 3 года назад

Build an outside oven from bricks&cement then metal sheets plus build a door.. Oven some food! Even a furnace for a cabin.

@VictorRodriguez-rd5xl 2 года назад

Thanks for sharing 👍 nice video explaining...God bless 🙌

@useful.knowledge 2 года назад

Thanks!! God bless you also!

@lazarusmagellan2367 4 года назад

Planning on using this for a boiler. Thanks.

@useful.knowledge 4 года назад

Hi. I built three of those last summer and they worked great on my syrup cooker. All the best building the boiler.

@lazarusmagellan2367 4 года назад

@@useful.knowledge Thank you. This will be much more reliable than ceramic tiles, which are already consumable, but prone to cracking.

@benowen9378 2 года назад

Will a line flame be hot enough rather then a round hole burn?

@linwardmesser7001 2 года назад

Thanks brother i learned alot

@useful.knowledge 2 года назад

Thanks!! Just a note, I built three short (2ft) burners for another smaller syrup cooker. The same orfices worked on those.

@benbarlow5588 2 года назад

Looks great - got a venturi from Tejas after watching your video - I know this was years ago, but was wondering whether you updated your design any? Any idea what heat one pipe could get a 3x5 cooker up to?

@useful.knowledge 2 года назад

Hi. I have made some others but I really didn’t change the design. I made a shorter 2.5 ft version and used the same venturis for my smaller syrup pan. Check out our Sorghum video to see them burning ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q6mmeqImkWU.html

@murrayhelmer8941 5 месяцев назад

That’s cool. I want to turn a 1000 gal propane tank into a propane powered smoker/ bbq. Proper Wood for an offset is hard to come by where I live. So thinking pellets for the smoke part

@useful.knowledge 5 месяцев назад

That will be an awesome smoker!

@ibrahimnaser7142 Год назад

Good job

@useful.knowledge Год назад

Thanks! Much appreciated!

@yogendrapalraghav3738 3 года назад

👌👌👌👍

@DrewGatsby 10 дней назад

Do you by chance know if it’s schedule 10 or 40? The black pipe

@useful.knowledge 10 дней назад

Hi. It’s schedule 40.

@levisalo 3 года назад

This is great stuff. It’s funny, I’m looking to build one for a syrup cooker too. I will have to alter the design a good bit tho. I’d like to run natural gas and my pan is only 12”x18”. Thinking stainless tubing with holes drilled. Anyways I’ll get there. Do you know of Venturi construction for natural gas? I gather it’s a bit of a different setup

@useful.knowledge 3 года назад

Hi. The orfice size would the difference between natural gas and propane. I would call the Tejas Smoker folks to check if there venturi works with natural gas. I don’t see why it wouldn’t because it should just need the correct orfice for natural gas.

@MsDupree123 4 года назад

Hello I have a canning question can you do boiled chicken and beef and ham the same canning method you use with the bbq sauce and jelly? thanks love your advise!

@useful.knowledge 4 года назад

Albert & San. Hi. Thanks for the nice comment! The answer is unfortunately no. For meats and non-acidic veggies like green beans, you need to pressure can so the temps get up to 250 deg. I actually had a viewer comment that she cans chicken in a 250 deg oven. That’s seems like it would work because you are getting your temp to 250 deg. It may be worth some investigation. All the best canning.

@MsDupree123 4 года назад

@@useful.knowledge Thanks so much will do

@bohdanbindas1506 3 года назад

Can a venturi be placed for example at the beginning of a tube and burner is like a meter and half away from the venturi? Would there be any problem with a flow? I am doing custom gas grill

@useful.knowledge 3 года назад

Hi. Once you get to the burner part, how may cuts or drill holes do you have?

@azzamakhal 4 года назад

Good

@MrGringissimo 3 года назад

Great stuff. Do you know anywhere to get that Venturi? Trying to make a home gas fired pizza oven and Tejas Smokers is out. Internet is not helping me.

@useful.knowledge 3 года назад

Hi. Wow! They are out of stock on venturis. This inspired us to come up with a completely home made venturi. I just got done trying it out. It works perfectly and requires parts that we bought at Lowe’s and Amazon (Lowe’s didn’t have a pipe tee so we ordered one). We only had to drill one hole to mount the orifice. We should have a video of how to build in a few days.

@MrGringissimo 3 года назад

@@useful.knowledge Awesome! I bought a cast iron housing and nozzle separately from different vendors. We'll see how it works out. Can't wait for your vid!

@useful.knowledge 2 года назад

Hi. The video is up our channel. What we show there is about as simple as it get and works great! I think it works just as well as the purchased venturi.

@jasonnagley1978 3 года назад

I just saw your video on building a pipe burner my cooker for maple syrup is 60 in long and 28 in wide how many of those pipe burners do you think I would need and how far away did you put yours from the pan

@useful.knowledge 3 года назад

Hi. I went out and measured my setup. I have three burners for a 24” wide pan. I have the top of the pipe 8” below the bottom of the pan. I think three burners would most likely work for a 28” pan.

@useful.knowledge 3 года назад

My advice would be to build three of the burners and try the setup with your syrup pan full of water. See how it does boiling the water. This is how it verified my setup was good before making sorghum syrup.

@jasonnagley1978 3 года назад

Great thank you for your help I thought your video was very informative and to the point

@useful.knowledge 3 года назад

Thank!!

@jasonnagley1978 3 года назад

Okay thank you I was wondering about that because I fired mine up and if I try to run much over seven or eight PSI then the flame is really starving for air it burns best around 5 psi

@benowen9378 2 года назад

I use to work at a bakery it had a huge brick oven filled with beach sand and heated will raw diesel

@fauzielfighi5552 3 года назад

Hello, like your video , what if I make the hole spacing 1/2 “ ?

@useful.knowledge 3 года назад

If you cut them at 1/2 inch, I wouldn’t make them too deep because you have to make sure that you’re not cutting so many that you’re regulator/tank can’t keep up with the amount of gas flowing. The issue is it could freeze up the fittings.

@fauzielfighi5552 3 года назад

Tks

@SN1350 Год назад

not sure what I am doing wrong, but I cannot get my flames to be even. it starts out low, like very low and toward end of pipe flames get higher. can you give me any pointers? I am using a 1 inch pipe. all my cuts are 1/2 inch apart. I did give a 8 inch throat. my venturi is a 3" to 1" reducer and using high pressure regulator. Any ideas will be appreciated.

@useful.knowledge Год назад

What size is the orifice hole? Sounds like the gas needs to be slowed down slightly. I mean very slightly.

@SN1350 Год назад

@@useful.knowledge I ran a pin gauge through it and it was .0395

@zacharygarber1937 3 года назад

Do you have an idea of how many btus it produces? Or I could ask it another way: how long does that tank last?

@maylonjones Год назад

94k btu in a gallon of propane this is probably 40k btu roughly so burn so in 2hours bur about 2.3 gallons.

@aliallawy1887 3 месяца назад

Which give bigger blue flams , holes or line cuts on the pipe?

@useful.knowledge 3 месяца назад

I like the cuts because it’s faster to build and I know they work. Also, I’ve been using then ones built with cuts for many years.

@bizim_eller 3 года назад

👍👍🙂

@hieutrinh4281 3 года назад

hi, i hope i can ask you some questions regarding your burner. i am planning to make 2 of these pipe burners for my 275 gallon oil tank for a grill. would these be hot enough? thx.

@useful.knowledge 3 года назад

Hi. Sorry just saw this. I used three of these to boil sorghum juice for syrup. What is the size of the grilling area? My syrup pan is 2ft wide and I had them spaced evenly.

@hieutrinh4281 3 года назад

@@useful.knowledge the grilling area is roughlty 24" by 60". but the cooking area will not be that big. so instead of having 3 or 4 short burners like the traditional grill, i think about using 2 long burners running along the length of the grill. from your video, can you adjust the flame higher with the regulator or this is not adjustable. also you mentioned 3 burners, are they tied together into one bottle with 3 separate ball valves? thx for quick reply.

@useful.knowledge 3 года назад

It is somewhat adjustable using the venturi and the regulator. Also, I bought several of the orfices so that I could drill them out to get the perfect burn. I drilled one out too much and couldn’t get good velocity of the gas. The orfices are the least expensive part of the build so that’s where I concentrated on the gas adjustment.

@tommierice9646 Год назад

Did it work for your 275 pig cooker ?

@Devoneakapimp 3 года назад

I love you

@christopherguinuyod306 Год назад

Hi sir, I like this type of burner and i'm inspired to make an oven, but is this could be applicable in making it?

@useful.knowledge Год назад

Hi. Check out our new 2ft pipe burner. It may be more applicable than the longer version.

@stevenskalman3162 3 года назад

How hot does this get? What temperature are you aiming for?

@useful.knowledge 3 года назад

Hi. I used three for cooking sorghum syrup. They worked for a slow boil for hours.

@johnmcmorris1170 Год назад

What thread count did you use on the pipe to match the Venturi?

@useful.knowledge Год назад

Hi. It’s a general specified thread count for each size pipe. I just told Lowes that I wanted the pipe threaded where they cut it.

@BryanBrews Год назад

Cool project! What happens when you turn it up to 30 psi?

@useful.knowledge Год назад

Hi. Thanks! Turning that one up to 30 would probably blow the flame out. I made a homemade venturi in another video that would run in closer to 30. Here is that video: Homemade Pipe Burner with Homemade Venturi - 2ft version | Useful Knowledge ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XKa_4Tdh6Jk.html. I put that venturi on the longer pipe in the video you watched and it worked great,

@thomashansen871 3 года назад

Do you have any videos or pictures of the sap cooking setup?

@useful.knowledge 3 года назад

I will this fall. The syrup pan that I had was too big for the amount of juice that I had. I purchased a smaller pan and will be planting sorghum in a couple months.

@useful.knowledge 3 года назад

Hey I found a few pics of what we did put together even though we didn’t have enough juice for a good run. Send me an email to useful.knowledge.tv@gmail.com and I will forward you some pics.

@benowen9378 2 года назад

How hot will this work in a brick oven ?

@benowen9378 2 года назад

The ventury looks about the same size as my old revaluation over 24 pans

@benowen9378 2 года назад

I need to build three for a brick oven I believe

@useful.knowledge 2 года назад

How long do you need the three burners?

@BlueJazzBoyNZ 3 года назад

Thanks and Great to see the Safety tips !! I see a Pizza oven burner bent into a U

@useful.knowledge 3 года назад

Thanks and that’s a great idea!

@BlueJazzBoyNZ 3 года назад

@@useful.knowledge You may be able to pick something up cheap as a shell. I'm looking at something like a home built ooni koda 16. And fill it with expanded perlite as the insulator. 1 1/2-2 in thick walls and a pizza stone. Maybe a high temp glass door..

@useful.knowledge 3 года назад

I looked up the Ooni Koda 16. You’ve got an awesome idea. I’m wanting to build a canning shed and something like this could go on the covered porch.

@BlueJazzBoyNZ 3 года назад

@@useful.knowledge Spread the knowledge wealth in this global Village. Hi from New Zealand BTW

@useful.knowledge 3 года назад

I work with a friend that is American Samoa. He spent his honeymoon in New Zealand a few years ago. They really had fun.

@zevs2835 Год назад

How big is the Venturi??

@12NotTalk 4 года назад

anyone know where I can get the venturi? No real good amazon searches

@useful.knowledge 4 года назад

David Simoneau. Hi. I got the venturi from Tejas Smokers. It’s an HP MAX-1. tejassmokers.com/Venturi-Air-Gas-Mixers/533

@larrypowers5507 3 года назад

Allied kenco

@Blade_Sm1th Год назад

Would it be the same for something smaller, as someone said, as do a patio ambiance piece? Same Venturi and piping? Also, limited to lava rocks or a specific rock type for the pipe burner type of display? Thanks again, loving the channel and videos

@larrypowers5507 3 года назад

How do you hook up two burner together ?

@useful.knowledge 3 года назад

Hi. If you are wanting to connect them to the same propane tank, you can use a splitter or manifold. Honestly, I have three identical setups connected to three separate tanks in my syrup cooker.

@charleston51010 2 года назад

Can you please provide me with the site you ordered your Venturi and orifice from

@useful.knowledge 2 года назад

Hi. Tejas smokers is where I purchased the venturi two years ago. It cost about $90. A few weeks ago someone posted that they were out of stock. I decided to try to build a home made one. Here is the link for my homemade venturi. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pK1YoptPrmg.html&feature=share

@charleston51010 2 года назад

@@useful.knowledge lol. I'm heading to Home depot right now to make the one in your video. Thanks a bunch. Super informative video

@useful.knowledge 2 года назад

Thanks!

@useful.knowledge 2 года назад

I got the orifice from Amazon

@johnfrancis5243 4 года назад

Can I use this with liquid petroleum gas?

@useful.knowledge 4 года назад

John Francis. Hi. I understand that LPG can mean propane or butane or a mix of the two. That is a propane tank that I have it connected to. I haven’t tried it on anything other than the propane. I made my orfice adjustments on the knowledge that I would be using propane. If I did use a different gas, I would try it to see how it does and make adjustments with different orfice sizes. Hope that helps.

@mrfaulk7739 2 года назад

I Kno to run a furnace off lp you have to use a retrofit kit that has different orifice sizes and a low pressure safety

@alfredolentini2111 4 года назад

Ciao ottimo lavoro mi puoi indicare il tipo di tubo grazie.. hy

@useful.knowledge 4 года назад

Hi. Thanks!. It's black pipe that would be used for plumbing natural gas. We can purchase them at hardware stores in the US. Thanks!

@kyladelan1134 4 года назад

Could you make dragon fruit jelly or jam?

@zacklanford9486 4 года назад

I am looking to build this for a gas fire pit to put on the porch. What will happen if I do not use a venturi?

@useful.knowledge 4 года назад

Zack Lanford. Hi. The venturi basically mixes air and the propane. It lets you adjust for the perfect blue flame. If you want yellow flame, I could see giving it a try without a venturi. You’ll just need to mod it up to connect the propane hose tank to the pipe.

@Blade_Sm1th Год назад

Any suggestions as to the mods that may be needed? Love the videos, interested in trying this

@junkcarz4720 3 года назад

Where can I get parts

@ScoutSniper3124 Год назад

What brand venturi is that? Thanks

@useful.knowledge Год назад

Tejas Smokers is the brand on the venturi

@docesam Год назад

How did you determined how many holes you will make?

@useful.knowledge Год назад

Honestly, I started at the 8” throat mark and just marked them until I got to the end of the pipe with the last cut just before the threads.

@docesam Год назад

@@useful.knowledge the questing is :are the holes too few, resulting in less than desirable BTU? or the number and size is OK. i can't see any resources for that.

@useful.knowledge Год назад

They seem to be about right on the distance if cuts. I have three 2ft burners that I built the same way and they work perfectly. They will boil syrup really well.

@1963playball Год назад

Where did you buy the Venturi

@useful.knowledge Год назад

Tejas Smokers. Check out my homemade venturi on out latest pipe burner video.

@JL-77 Год назад

What thickness cutting wheel?

@useful.knowledge Год назад

Hi. 1/16”

@JL-77 Год назад

@@useful.knowledge thanks. Got my made

@useful.knowledge Год назад

Sounds good!

@gschady 4 года назад

Hy Vee has Log Cabin for $.99 12 oz all weekend .. jus sayin'

@thomashansen871 3 года назад

High fructose corn syrup, "jus sayin'"

@useful.knowledge 3 года назад

True!! So true!

@jasonnagley1978 3 года назад

What pressure do you run to the burner

@useful.knowledge 3 года назад

Hi. I initially bought an adjustable regulator so that I could go up to 30 psi. I’m not even close to that. I honestly think it’s probably around 10 psi after I drilled out the orfice. After I drilled it out the gauge on the regulator doesn’t read correctly so I really don’t have a good answer. If I had to do over, I would buy a 20 psi adjustable regulator.

@johnsites5105 4 года назад

Can I get the name and contact information of where you got your Venturi and orifice for your burner?

@useful.knowledge 4 года назад

john sites. Hi. I got the venturi from Tejas Smokers. It’s an HP MAX-1. Here’s the link: tejassmokers.com/Venturi-Air-Gas-Mixers/533

@-joe90 3 года назад

Make snake grill

@harleyhawk7959 4 года назад

someone could make one of those for a nice patio ombionce. people pay 400.00 a pop. to sit next to.

@benowen9378 2 года назад

I want to build my own big brick oven to bake all kinds of goods not just pizza

@benowen9378 2 года назад

I have natural gas

@BrianJohnson-ih1hb 2 месяца назад

I know this has been awhile but from my trade, when grinding you need to at least tuck in the front of your shirt tail, just in case the grinder kicks back it doesn't get caught in the loose tail of your shirt, other than that great job.

@wiking44 7 месяцев назад

A shame that everything in this video has pretty much doubled in price since it was made. While this shows how easy it is to make one, I'm just going to buy one from Tejas since it's not much more than buying the parts.