Honda GX160 Starter Service 

Thanks! I had a broken gx200 starter pull that I rebuilt from your video. Work's like new now. Saved me $75.

Stellar! No frills and additional comments. Straight forward! Thanks my friend.

Thank you so much!!! This definitely kept us able to finish out the work we started. Truly appreciate you!

Thx. Yours is best on RU-vid. Plain, simple, no garbage.

Very versatile video. The direct, simple approach was perfect. All I needed to do is change the cord. Thank you.

Thanks so much for this video! My dad was frustrated with the spring and put me on the project. I tried for a few minutes before deciding I could look for a video tutorial. This was perfect - very clear, concise instructions without any chit chat! Got the motor running in 15 minutes. Cheers!!

Thank you! I was about to break something after fighting that recoil spring for a couple of hours but the tip about just positioning the center coil end correctly before remounting helped immensely 👍

This mower has been kicking for about 10 years now. Always had a short cord on it after the original snapped and other minor issues with the recoil starter ru-vid.comUgkx-NCBSqqKJlyQ5_JGS_STpsFYihe7bmM3 until I finally had to open it up in an attempt to feed in a new line. I noticed it was all rusty and the coil was going but upon dismantling it was too much of a pain to get it all back in there correctly and opted to just get a new one. not sure why i waited so long to do so but it was a cheap, easy fix and it would have saved me hours of fiddling with the old rusty coil or trying to pull start and having cheap make-shift lines break in my hand during a pull. If yours is scuffed just replace it!

Thanks I was having a really hard time with this and you cleared it right up!

Now that’s how you make a great video. Great job.

Excelente docente este profesor. Aun sin saber su idioma he aprendido la lecciòn. Mil gracias por enseñarme y que Dios te dè larga vida para que siga enseñando a miles de personas para que tengan una profesiòn de que vivir y educar su familia.

Very informative, concise and comprehensive. Thank you very much

Thanks for this video. Bending the spring solved my issue. THX!

This helped me immensely. There are many videos on replacing the cord but not about assembly/disassembly of the starter itself. Well let's just say when I opened mine due to a jam, I was not expecting the metal band spring to explode into a giant tangled ball. Needless to say, trying to brute force the coil back into shape is impossible. Doing it with the method in the video is the only way I was able to do it 😅

Excellent to-the-point video. Thanks.

A no nonsense explanation. Thanks.

First time having to replace a broken pull cord, would have been a bear without this tutorial, saved me lots of grief! Thank you!! :)

great video followed all the way no problems now thanks!

Top video, this saved me a discussion with the hire place.

Thank you so much, I couldn't have done it without your video, frank new zealand

Very helpful. Thank you. Sorted out what I was doing wrong with reassembly and got me going again.

Gracias🙇 watch many videos. until I found yours and it was he who gave me the request... Thanks👍

I have heard your complaints about the background music, so I deleted the old version of this video and replaced it with one with no background sound. Hope you enjoy it.

Gracias muy didactico el video (despues de mirar mi motobomba 2 años con el tirador cortado por fin lo he arreglado)

Teşekkür ederim. Sayenizde sadece 0.50 TL'YE işlem tamamdır. Ben Otomotiv teknikeriyim, starter ipi hiç değiştirmedim. Motorlu testerelerde de aynı sistem var. Hiç uğraşmadan direk yeni starter alıp çok paralar veriyorduk. Çok basit bir işmiş. Teşekkürler.

Thanks a bunch for this video. I guess I rotated it the wrong way and broke the spring. I was here looking at how to do it the right way.

Excellent!

Thanks brother good understanding.

Champion. Thank you

Excelente esplicacion aunque no sé el idioma pero entendi el trabajo perfectamente gracias

Thank you so much. Your video is usefull!

I was about to try this when I decided to spray a generous amount of WD 40 into the coil and let it sit for a day. The next day the rope pulled back into place and it now works fine. You may want to try this before taking the pull starter apart.

Nice video, helpt me out a lot

thanks. ..it is very useful for us villagers

Thank you sir, very helpful

Great video also only one I seen this detailed

Thank you great master

Thank you so much sir ❤️❤️👍

Thanks for sharing👍🏿

Great tutorial! I want to change the orientation of the module so that the cord handle is at 2 oclock and not at 10. Since I placed the generator in a soundproofing box it become very uncomfortable to manipulate the handle from behind at start engine time. Btw as well as yours my recoil cover has 6 holes of which only 3 are used. If this possible to do without affecting the starting operation?

This helped me. Thanks alot

Thank you 😎👍

Thanking you so much

Top video thankyou

Thank you so nice 👌❤️❤️ it's working

Muchas gracias 👍🏽

Thank you so much sir

Thanks

Love the video easy to follow however that black plastic circle is giving me some serious issues! It's unscrewing the screw holding it down when i pull the cord! Please help!

Do u no the part numbers for the return springs an friction spring in the paw

Good video

Thanks brother good understanding .How we can set ignition timing in honda spray motars. upload animition

Ok thanks so very very good

I'm trying to make out from the video if the threads on the screw are normal or reverse thread? Are you turning it Counter Clockwise to remove the screw or Clockwise? Mine is stuck and I'm afraid to break the screw if I put too much force on it the wrong way. It looks like CCW here, as per normal, but because the engine runs in the same direction (and thus vibration might back off the screw), I thought this screw would be reverse threaded. Thanks.

What if the writing is upside down so I can start the machine from a different angle? Upside down writing affects anything?

Merci

What do I do if the ratchet guide is stuck

Trataré de hacer, ya que no puedo enredar el resorte y ajustar la cuerda

Best

Use menos q lo q El dijo no tuve q sacarle las piecitas q El le saco pero exelente el vídeo tenga su buen like buen señor ojalá y le pudiera poner más q un solo like lo pusiera

How many prices.....?????

When I try to remove the 3 nuts with a 10mm ratchet the nut keeps on spinning. Help ! What can I do ??

what size bolts are those?

Bueno días me gustaría que sí pudiera hacer un favor tengo un motor de arranque que no me recoge muchas gracias 🙏🙏

I love you

Where is the detailed work sheet

Good

This is a lot harder then you think better off just replacing it for $20AUD for a kit that comes with a starter and a few other goodies off eBay

Klau beli alatnya ada

THIS IS NOT HOW YOUR INSTALL A START SPRING

Thank you so much sir ❤️❤️❤️👍👍

Thanks

Thanks