I’ve always wanted to no if I can use my fg200 50cc from a tiller an a go kart engine. But worry it mite go bang due to oil not getting to the valves . But have been told to just change the carb set up
Does the genuine Honda GX50 from your Thailand factory require the user to do a break-in/run-in of the engine? Has it already been done at the factory? Thank you.
Hi there, thank you for reaching out. The Owner’s Manual will explain the initial startup and operation of the engine. It will also confirm the type and amount of oil to use.
@@HondaOutdoors Thank you, I greatly appreciate your response. Although, I would just like to know if the engine requires a break-in procedure. Thank you.
Hello Rocco, thank you for reaching out. We are unable to comment on future releases but encourage you to sign up on our website for exciting updates and offers on our products. You can find the sign up at the bottom of the web page here: powerequipment.honda.ca/
@@HondaOutdoors Ok,thanks for reply.I hope that a 3 horsepower version will be produced because I have severe headaches with 2 stroke engines caused by inhaling the exhaust fumes(for the mix of oil and gasoline). So I bought Honda UMK450 and I solved the headache problem (because there is no oil in the fuel) but 2 horsepower in certain working conditions are not enough. Best regards. Rocco Barca.
@@roccobarca4558you can always tune yours, put pwk 19mm carb on yours, get the air filter and play a little with tuning and possibly buy a wideband o2 sensor to tune the aft to 12.5 up to 13 for this engine, it will breathe more and get more fuel resulting in more power
Hello, there. Your local Honda Power Equipment dealer can answer questions regarding pricing. To locate your nearest Power Equipment dealer, please click here: powerequipment.honda.ca/where-to-buy