Are 4-Stroke Bike Kits better than 2-Stroke Kits? Let's find out!

Подписаться 3,2 млн

Просмотров 4,8 млн

50% 1

In a previous video ( • Are 2-Stroke Bicycle E... ), I built and tested a 2-stroke bike engine kit. For $120, it turned out to be a great kit! It does require a little bit of upkeep and maintenance. In this video, I put together a 4-stroke bike engine kit and then compare it to the 2-stroke bike engine kit. We test top speed, ease of use, noise, amount of exhaust smoke, and several other things. I purchased the kit from Amazon for $189. I don't normally provide links to the products I test, since I'm not an Amazon partner and my goal isn't to sell products. These kits are also available on many other websites. So, recommend shopping around for a better price.
Products Tested In This Video (in no particular order):
4 stroke bike engine kit: amzn.to/2YrDHZ5 (no longer available)
2 stroke bike engine kit: amzn.to/3l7P5TG (no longer available)
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Хобби

Опубликовано:

28 окт 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12 тыс.

@ProjectFarm 3 года назад

Thank you all for suggesting such terrific video ideas, including this one! Here are a couple of links for bike engine kits, but highly recommend shopping around for a better price. Thanks again and best regards, Todd. 4 stroke bike engine kit: amzn.to/2YrDHZ5 2 stroke bike engine kit: amzn.to/3l7P5TG

@arnulforoldan8608 3 года назад

@lylelafave2039 3 года назад

Thanks!!

@thommygun999 3 года назад

How muchdo they cost?

@connorssmallengines6663 3 года назад

Thomas Bostick 120 for the 2 stroke and 150 to 170 for the 4 stroke. The four stoke is worth it It is much more reliable. I have used it to ride to work after I sold my car.

@connorssmallengines6663 3 года назад

Project Farm can you try to run the 4 stroke bike on vapors?

@terminator8802 3 года назад

I’m 13, and my dad is a mechanic, I just kinda wanted to show him that I was interested in working on engines because I ride with him, but don’t know how to fix anything, that 2 stroke kit is coming for me in a couple days.

@ProjectFarm 3 года назад

Fantastic! Glad to hear you are interested in mechanics. Learn all you can.

@Tarquavioustipson 3 года назад

If you want to know about being a mechanic I would recommend watching chrisfix's videos, he's great at repairing cars.

@556andy 3 года назад

So how did that kit worked out for you ??

@terminator8802 2 года назад

@@eugenecrabs3954 ha thanks

@4myqtz 2 года назад

@@eugenecrabs3954 bro that reply could have been 1 sentence, no one asked for a list of mowers

@locouk 5 лет назад

It’s a very rare thing for such a big YT channel to read and reply to most comments, I’d like to say thank you for taking the time and trouble to do so.

@ProjectFarm 5 лет назад

Thank you very much! I really enjoy the interaction. It's what makes RU-vid so much better than TV. Thanks again.

@MattExzy 5 лет назад

Not only that, PF knows what he's doing with these kits. I'm in a nanny-state of a country (Australia) where these things are illegal, but I like to ride a bicycle, so I've watched a few of these conversion kit videos. This one and the two-stroke one, despite being brief and not 'step-by-step' are still the most thorough and well thought out examples.

@mwbgaming28 5 лет назад

@@MattExzy as someone who lives in south australia (pussy state) even the 200w compliant 2 stroke kits are illegal, yet the cops dont pull me over when i whizz past them on my 2500w electric bike at 60kph (or when i out accelerate them at the lights)

@xiaoxiaoxiao686 5 лет назад

👍🏼👍🏼👍🏼

@botiroti1 5 лет назад

Id like to take the time to say thank you for thanking him.........

@robertgoss4842 2 года назад

The 2-stroke and the 4-stroke videos were both excellent, and presented with your customary precision, confidence, and gusto. Looking forward to your next video.

@ProjectFarm 2 года назад

Thanks so much! Thanks for sharing.

@Animezoa1 2 года назад

Iyot

@rogerthat10-47 2 года назад

But the 2stroke is the "Smell" of my youth. You're new to me, I like the detail you give that so many others don't, so I subscribe.

@orange70383 2 года назад

I love that 2-stroke smell, we all ran Castrol 2-stroke oil in our dirt bikes growing up, it's a heavenly smell.

@applepoop10 2 года назад

Just run a 2 stroke mix in your 4 stroke engine and it will produce the same effect!

@achubbyguytryingtogetbeefy6063 2 года назад

@@applepoop10 I tried that on my 110cc moped. It didn't work. What could be wrong? 🤔

@altruismfirst6489 2 года назад

@@applepoop10 yep intentionally glaze your bores make your 4 stroke speed into that of a granny crawling, brilliant

@Rakkasan-vr8xt 2 года назад

Same here, I run Castrol 927 in my KX500 and my sons KDX200

@darkhorse2reign 5 лет назад

If every DIY video on RU-vid was this detailed (for beginners and intermediate hobbyists) I would never have to do any research lol. Thanks again, Project Farm!

@ProjectFarm 5 лет назад

Thank you very much!

@bbrizs 4 года назад

Check out ChrisFix

@supermansuperman9066 Год назад

I WONDER IF EITHER OF THESE BIKES COULD BE USED BY A 326 LB. MAN ? AND ALSO, THIS MAN WOULD BE GOING UP HILLS SOMETIME?

@jasonh380 3 года назад

He has convinced me to buy both a two-stroke and a four stroke this man deserves way more than he has

@donotwantahandle1111 3 года назад

Agree. I have no intention of buying one of these kits (illegal where I live) but I like watching his videos.

@phillyunrau4736 Год назад

..not ILLEGAL anywhere ,,bcz NO VICTIM means No Crime government means MIND CONTROL btw so Stop VOTING and Right ✅ to Travel No License No insurance etc FREEDOM OF MOVEMENT must be allowed and

@mikenco 2 года назад

Lifelong biker here. Loved watching both these vids, shame these engines are illegal for road use in the UK. Top tip for the handlebar grips; when fitting new ones, use hairspray!! The solvent evaporates after half hour, and the gentle adhesive in it will keep the grips on there for life!!

@ProjectFarm 2 года назад

Thanks for the feedback.

@deusexaethera 2 года назад

Or use ODI bolt-on handlebar grips. I started using those when they first came out for mountain bikes decades ago, and I will never go back to slide-on/cut-off handlebar grips. They're such a pain when you need to service the brake levers or shifters.

@Hjerte_Verke Год назад

You all ought to change that. Storm Windsor Castle and Parliament and have your revolution! Liberty!!!

@phillyunrau4736 Год назад

..Right ✅ to Travel No License No insurance etc FREEDOM OF MOVEMENT must be allowed and Canada and USA and Australia 🇦🇺 are Corporations of Rome btw and government means MIND CONTROL so Stop VOTING and

@fixerupperer Год назад

Not for life, especially in the rain or off roading/torquing on the grips often. Ive got a can of aquanet in my bike tool kit.

@ericshayer Год назад

I simply love the two stroke oil smell. But the centrifugal clutch is a game changer for the 4 stroke

@fredrhodes540 Год назад

Especially if you race oil!! Ha ha.

@cheetoman23 Год назад

That shit causes severe neurological diseases.

@boerbrabant 5 лет назад

Next diesel bike build😂

@ProjectFarm 5 лет назад

Nice! It'll definitely need a big coffee can exhaust tip too!

@sephcrow 5 лет назад

@@ProjectFarm better yet lets do a biodiesel bike

@caidencrawford9913 5 лет назад

boer brabant then after that a 2 stroke diesel bike

@wyattlarrick3246 5 лет назад

@@caidencrawford9913 Only if it's a Detroit Diesel 2-stroke!

@OnlyNotes 5 лет назад

12 valve Cummins swapped mountain bike...

@mr.longlegs4431 4 года назад

next video... “twin turbo 6.5 litre V8 bike kit”

@ProjectFarm 4 года назад

Nice!

@that_catto 4 года назад

Nah fam v8 loves superchargers more xd

@mr.longlegs4431 4 года назад

that_cat ahahahah

@joshuaredhorse4030 4 года назад

squeeze a Bugatti quad-turbo W-16 mill under the seat and go set some land speed records!

@ted3109 4 года назад

Mr. Long Legs ls swapped bike 😂

@keithschurr8753 Год назад

I just wanted to say that I had one of the 2 stroke kits and I used this as my only transportation for about a year ( then it got stolen) and there is most definitely a lot of maintenance involved with the 2 stroke and quite a bit of a learning curve with doing that. The most important thing I found was making sure the chain tensioner was properly aligned and tightened. I had a chain break and that was no fun at all. Also having good tires and thick tubes is a must. Lastly I would never recommend buying one of these kits for a young child to ride, the bike is fun to ride and all but just not engineered for those kinds of speeds. I'm a grown man and it took all of my attention not to get killed on mine when riding around in Las Vegas, probably better off that it got stolen because it was just a matter of time.

@ProjectFarm Год назад

Thanks for sharing!

@theonewhoknows2 Год назад

My 2 stroke 125 needs like no maintenance compared to a 4 stroke. I dont know what your talking about .you must not have a good engine or sounds like your talking about maintenance of the bike more than the engine

@Tomazack 11 месяцев назад

@@theonewhoknows2 Yeah usually a 2-stroke only need the oil mixed in and a good carb tune and away it goes. The 4-stroke especially cheaper ones will have to always be valve adjusted in order to maintain good efficiency and reliability. Plus it's more moving parts that wear out eventually, the 2-stroke is the king of simplicity.

@theonewhoknows2 11 месяцев назад

@@Tomazack yea exactly, my cr125 has only had a couple problems like a clogged jet , besides that it always runs and idles no problem. It likes the crappy autolite spark plugs or ngk as once i had a iridium spark plug and put it in and it burnt out the first time i started it with it.Most reliable engine i have ever come across

@davidperreaux1348 10 месяцев назад

I agree with you about the safety concerns. I was thinking about the fun and efficiency, etc. but after my own experience riding human powered bikes on wet downhill roads, I felt myself struggling to keep control. After seven miles of getting soaked by the rain, then realizing that my front brakes had come loose, your message reminded me of the potential dangers of a powered bike. Unlike motorcycles, which can also be deadly, bikes haven't enough weight to aid in control during high winds and bad weather. Too risky for me.

@danjustesen8911 2 года назад

I love your show, I've been with the Home Depot for almost 22 years now. I recommend your show whenever someone has questions on products you've tested. They make a 12v turbo/super charger for around $100. It might be fun to hook that up to your 4 stroke bike motor to see what it does.

@ProjectFarm 2 года назад

Thanks! Thanks for the suggestion.

@davelowets Год назад

It would do nothing. Its an electric fan and nothing else

@shaunemicheal7362 Год назад

Nighthawk in light did a show where he built a wood gasifier for fuel. I've been using 2 stroke kits for a few years. I think I'm gonna build with the 4 stroke kit next.

@jonahardayfio7746 9 месяцев назад

hmmmm

@dannon2010 4 года назад

“Don’t use gorilla tape, I want to get this off...”. That is the most accurate description of gorilla tape I’ve heard. That tape is like epoxy. I’ve used to to install a license plate temporarily, and when I wanted to install it with screws, I decided just to keep the gorilla tape it was so clearly adhered to the plastic bumper. It was like that for well over a year. Great video

@ProjectFarm 4 года назад

Thanks!

@BB-1990 3 года назад

You need to heat Gorilla tape with a heat gun or hair dryer to remove it.

@buckshoty 3 года назад

I ised it for some quick and dirty bidy work on a black car. It didn't look too bad! And the plastic pieces I taped stayed together until sombody bought the car from me. (I showed them the repair).

@ianminatani2006 2 года назад

Man if you think Gorilla Tape is good, buy yourself a roll of T-REX Tape. Gorilla tape is epoxy, T-REX tape is the tape version of welding. The madlad @ProjectFarm pulled a small tractor with one loop of the stuff.

@nathanhale7444 2 года назад

Really? I must be doing something wrong because I've been pretty unimpressed with gorilla tape

@FattyDoveRacing 5 лет назад

Another 4 stroke advantage: no mixing fuel and oil

@ProjectFarm 5 лет назад

Great point!

@pbmachines972 5 лет назад

cool name dude im doing a build that might turn into a giveaway check it out

@DFX2KX 5 лет назад

That's one of the reasons I hadn't built a gas-bike. Just from that alone.

@DrLoverLover 5 лет назад

Yeah, that's really hard work...

@commandercody38 5 лет назад

But that is the advantage. Gas n go. One less part to maintain.

@terranempire725 2 года назад

Thanks for another great video. I watched both the 2 and 4 stroke videos and enjoyed them. Riding a bike at 37 mph is pretty brave. This has me thinking about building one for myself.

@ProjectFarm 2 года назад

You are welcome! Thanks for sharing.

@mattzahmdotcom Год назад

Love the zip tie spacer trick! Also I appreciate how you keep things fun, scientific, and honest.

@ProjectFarm Год назад

Thanks!

@GorillaCookies 4 года назад

The 4 stroke Engine performance can be increased very easily with just a bit of carburetor and exhaust modifications. I opened up the fuel & air circuits and added a better breathing air filter . Modified the exhaust pipe as well. It gained 8 mph @ WOT and has much better acceleration and power throughout the rpm range. I would estimate it gained at least a single HP . But probably not much more than that. It definitely woke up because a 25% increase in Top speed is significant irregardless of engine displacement. It had a previous Top Speed of 36 MPH and now consistantly runs 44-45 mph

@ProjectFarm 4 года назад

Impressive!

@GorillaCookies 4 года назад

@@ProjectFarm might be if it stays together . I may have sped up not only the bicycle but the engines day with death. And maybe Ive increased its life span by making it more efficient. One will never know. But the intake charge running richer has made it run a bit cooler and the speed increase helps with the cooling as well. So that definitely adds to efficiency and efficiency adds to higher average power production throughout the RPM range . Time will tell. But It is pretty impressive to me that it will now take off on engine only power carring someone my size ( 6' 2" and 221 lbs . Its no dragster but does indeed pull off with a increasing speed and RPMs without bog or hesitation . It definitely wouldnt originally. Im sure its pretty hard on it to do so . But it does do it.

@mrinternet5562 4 года назад

Holy moly...anything over 40mph on a bike is dangerous. My top speed down a local mountain road is about 47mph on a mtn bike and that was nuts... Honestly.i'd stick right around 30mph if you don't want to die... and keep the reserve speed for when a band of backwood bandits start chasing you.

@GorillaCookies 4 года назад

@@mrinternet5562 I drag race a Top Fuel Harley Davidson and have been drag racing bikes for 26 years. I think I will be ok

@theblackhundreds7124 4 года назад

@@GorillaCookies Except you're talking about motorcycles. Bicycles are not meant for all that weight, forces and vibrations at those speeds. He is very smart for sticking it in the 30mph and if that. You compare the two only shows that you're most in danger, because ignorance is a killer.

@mattomite9097 4 года назад

I’m having flashback to my friends and building out our mini bikes. “Master link keeper” started to give me flashbacks. Love your videos!!! Always fantastic

@ProjectFarm 4 года назад

That is awesome!

@mikef-gi2dg 2 года назад

I had never considered a gas powered bike before but that looks like a lot of fun. I think I prefer the four stroke over the two. If I can use a kit like that on the bikes with the large tires I think I would be rolling!

@ProjectFarm 2 года назад

Thanks for sharing.

@jimjenkins3313 Год назад

Great video. What' funny is I just watched your 2-stroke build yesterday so it was still fresh on my mind. Another example that you forgot, unless I missed it is no mixing of oil on the 4-stoke. That and the fact it's much quieter makes which one an easy decision for me. Gracias!

@TacticalGhost007 7 месяцев назад

Mixing 2-stroke fuel is a problem? Really? We have become pampered children in adult bodies.

@DjSubstar 4 года назад

Such a great idea, let's call it a motorbike!

@ProjectFarm 4 года назад

Thank you very much! With warm weather finally arriving, I've been riding it 3-4 times each week. Still running great

@Broken_Orbital 4 года назад

*moped* MOtorized PEDal bike

@shakoor3218 3 года назад

How fast does it go?

@mac11380 3 года назад

@@shakoor3218 37 mph

@mac11380 3 года назад

Then you would have to have a licence.

@louisyeo2009 4 года назад

lying down and watch this with a cup of hot coffee, wondering this will be my next project during this covid19 lockdown..

@ProjectFarm 4 года назад

Thanks for watching!

@ayden8798 4 года назад

Same 😂

@mclebien1105 4 года назад

I did one, it’s honestly a great way to pass the time. Putting it together is one thing, tuning and modding it once you find out the potential they have is another. Lotta fun you can have

@Ben-qf2es 4 года назад

Just bought a bike on craigslist for $50 and this kit on amazon, thanks quarantine gonna have a fun weekend

@JephroDawl 4 года назад

Same!!

@ocean-driveslim5669 2 года назад

I just have to say one more time how much I appreciate your videos. I honestly believe you could not do a better job you will be the first person I contribute to on patreon

@ProjectFarm 2 года назад

Thank you so much 😊

@ohger1 2 года назад

6:40 An additional safety move would be to drill through the tensioner bracket and into the bike's frame to install a lock bolt to keep the tensioner from rotating into the spokes if a tensioner is needed.

@ProjectFarm 2 года назад

Thanks for sharing.

@Hjerte_Verke Год назад

That is a fantastic hack and one that will allow you to get finished quicker instead of having to break the chain.

@Fred_the_1996 Год назад

In my experience it doesn't move at all. Granted, my frame tubes are not round, they're oval, but yeah

@heroinmom153 Год назад

Good idea

@IPCRo 10 месяцев назад

Or you can use some rubber and tighten the bolts

@HelpFromAbove1 5 лет назад

Build a forced air intake for the 4 stroke (Turbo or Super). Completely ridiculous for such a small engine but I mean it's an engine on a bicycle already so why not try going a little silly....

@ProjectFarm 5 лет назад

Great video idea!

@noreason2701 5 лет назад

DO IT

@plumbgraham 5 лет назад

DO IT

@centralcoastcamper9631 5 лет назад

Just go with a nitrous oxide set up. There are kits out there already that could be used.

@bloodytosser1 5 лет назад

Fun idea, but from my research, very difficult. Most single cylinders can't provide a steady enough exhaust stream for a turbo, need a lot of RPM. Takes a lot of knowledge with carb sizing, placement, tuning and ignition timing.

@tommartin6767 4 года назад

In the 1940's teenage boys would use Maytag washing machine engines to this modification to bicycles.

@ProjectFarm 4 года назад

Very interesting! Thanks for commenting on this

@kevinerhartjr.273 4 года назад

They used to be gaspowerd?

@sunnyray7819 4 года назад

@@kevinerhartjr.273Yes, they used to have gas powered Maytag washers... You can probably look up the motor on yt atleast....

@KelikakuCoutin 4 года назад

Weren't those hit-and-miss engines? בס״ד

@sunnyray7819 4 года назад

@@KelikakuCoutin I am not for sure... Could have been...

@tenncutt 2 года назад

You know you can get a double pull brake lever that pulls both brakes with one lever so you can have brakes on one side and clutch on the other. Worked out great for my 2 stroke kit. 37 is hauling ass on a bicycle! Mine went 28 on our little country road and scared the snot out of me!

@dkis8730 Год назад

My top speed on a road bike is 58mph. Was so fun and also terrifying at the same time. Especially when a mom tried to jump out in the middle of the road bc her kid was riding a quad 💀

@jonminer9891 2 года назад

Hi, PF. I appreciated the way you were able to modify the kit to fit it into your bike. Way to go. Thanks for sharing! Stay Healthy!

@ProjectFarm 2 года назад

You are welcome!

@itizme8072 5 лет назад

About 40 years ago I put a chainsaw engine on an old 20" 5 speed. I use to fly all over the place, not knowing that was irritating people. I was riding it down near the beach once, and was stopped by a cop that I had a few run-ins with back then. The asshole was happy he got the chance to give me quite a few tickets that forced me to be unable to get a license till I was 21. Driving a motorbike without an operators license, no registration, no lights or required safety equipment crap. I remember standing there in court and instead of the judge saying something nice like " you built that thing yourself" ? No, instead he said " you seem to do what you damn well please don't you." Then told me I better be careful how I answer. I never did get the bike back. But boy did I have a hate for cops after that. And that wore off too. 30 years later.

@ProjectFarm 5 лет назад

That would have been a very frustrating experience!

@daemonwhitebeard6590 5 лет назад

I live in Southern Arizona. We can ride a bike legally as long as it is under 50cc, has a mirror, headlight, tail light, and foot pegs if you carry a passenger (pegs pointless on a motorized bicycle). Eye protection is required at all times, helmets by law for anyone under 18 years of age. What make them a "motorcycle" is fixed pegs and you have to license, register, and insure it. You also need a motorcycle endorsement on your license. For the most part, the cops in my hometown leave bike riders alone unless one of us does something stupid like running stop signs, excessive speed or something similar. I've had Pima County Sheriffs follow me but none made a move to light me up.

@586guest2 5 лет назад

yeah ive had a similar experience, i got dinged 2 grand worth of fines when i was younger on an engine bike, just part of the game, some cops are dicks, they will end up shot eventually tho karma works itself out

@edwardchance2543 5 лет назад

IT IZME_ motor assisted bicycle street legal 48 states in Tennessee only requires valid license and helmet no motorcycle endorsement

@wesleyalan9179 5 лет назад

.....i have the same story as you, lol!

@officialdieselstudios2251 5 лет назад

Put a turbo on the 4stroke bike kit.

@ProjectFarm 5 лет назад

Thank you for the video idea!

@officialdieselstudios2251 5 лет назад

No problem.

@daemonwhitebeard6590 5 лет назад

Or go one step further and install a Jackshaft and use the existing rear wheel mountain bike sprockets as a form of gears to get some good speed from your bike.

@abyssmanur3965 4 года назад

Or an expansion chamber on the two stroke.

@kiyoponnn 4 года назад

@@daemonwhitebeard6590 Lool imagine the top speed, you'd definitely need to upgrade your brakes

@petertimowreef9085 Год назад

aaah this guy is such a joy to listen to. Never trying to be funny, none of that 'personality' and 'brand' building lots of other YT channels engage in. This man uses verbal communication exclusively to convey information and I love it.

@ProjectFarm Год назад

Thanks!

@joeldobbs7396 2 года назад

Thank you very much for this, I was back and forth on getting one of these because my mechanical knowledge is..well..not good, in fact one of the reasons I want one is to learn more by installing and maintaining it. This will be a huge help and prevent me from being at the mercy of my motorhead friends for everything.

@ProjectFarm 2 года назад

You are welcome! Thanks for sharing.

@OliverMotorized 5 лет назад

I like the 4 stroke because they are quieter in my opinion and riding in the neighborhood is less obnoxious

@ProjectFarm 5 лет назад

Thank you

@haydenc2742 5 лет назад

Plus you don't have to pre-mix the gasoline..just change the oil on a regular basis (I don't think these little motors have filters and just like a Honda Rebel 250, gotta change the oil often to get rid of any gunk that might build up)

@thomasjaszewski64 5 лет назад

electric. dead quiet and 5% of the parts!

@ChefofWar33 5 лет назад

@@thomasjaszewski64 And 5 times the price.

@m9078jk3 5 лет назад

@@ChefofWar33 Electric has much higher MPGe (around 900 MPGe) ,much less indirect harmful CO2 emissions per distance traveled,you can pedal along bionically with the motor but doesn't have the advantage of easy refilling of fuel and nearly unlimited range as the battery takes hours to charge up. If you want exercise plus ease of going up hills electric is the way to go. I've gone 46 miles on an electric bike in range. If you want unlimited range with easy gas refills at a gas station an I.C.E. bike is better. Also it depends on state laws too. Many states won't allow I.C.E. bicycles on streets,roads or highways. In my particular state of Washington I.C.E. bicycles are considered unlawful non licensable motor vehicles. Considering the amazing MPG's you can get on a 4 cycle I.C.E. bicycle engine perhaps 200 MPG it would make sense to have them made lawful to combat anthropogenic CO2 emissions (Climate Change,Ocean acidification,Sea rise etc.) by having people ride these rather than inefficient heavy motor vehicles (passenger cars) which have a vastly lower MPG rating. Electric bikes serve one purpose and I.C.E. bikes serve usually a different one. They can compliment each other too.

@pssyo2566 5 лет назад

For those metric guys like me top speed is 56 km/h

@ProjectFarm 5 лет назад

Thank you!

@Choice777 5 лет назад

@@ProjectFarm 1.2 kw aka 1.6 hp ? Need a turbo on that thing :D

@norwedish01 5 лет назад

Thx mate

@janemancao4620 5 лет назад

56km/hr in non retard units.

@mmilelehloenya5161 5 лет назад

Thx

@TheGearhead222 Год назад

Great videos! I agree with you concerning the 2 stroke engines. My Grubbee 49cc 2 stroke only has a top safe speed of around 22mph, but I've put over 1000 miles on it over the last 2 years. Am impressed with it's durability-John in Texas

@ProjectFarm Год назад

Thanks!

@bryangrim6021 2 года назад

Really cool videos on these bikes!! Great and well done and documented projects. Definitely makes me want to do one. 👍

@ProjectFarm 2 года назад

Thanks!

@Nighthawkinlight 5 лет назад

Had the same trouble with the filter box not fitting in the frame for mine. The kit I used came with much better instructions, but I would have traded those for your all metal clutch. Mine has a plastic outer cover that was cracked on arrival. I've never seen cheaper cardboard than the box the kit arrived in.

@ProjectFarm 5 лет назад

Thank you

@MR_MIRTH 5 лет назад

No, thank you

@Sheesh6181 5 лет назад

Ooh it's NightHawkinLight, I have watched him for years

@DanteYewToob 5 лет назад

I was like... "oh NightHawkinLight... he hasn't posted in forever, lemme see what's up.." I was unsubscribed.. I didn't do that, and that's not the first time that has happened, it happened with VSauce3 recently as well.... Why is RU-vid unsubbing me from random channels?! Has anyone else had this issue?

@daemonwhitebeard6590 5 лет назад

If the airbox don't fit, build a small ram-air intake using a length of vacuum hose and reposition the air box/ filter. That should take care of your problem.

@TC-uy8ng 5 лет назад

You forgot to mention that you have to premix oil and gas in the 2 stroke, where in the 4 stroke you don't. A minor detail, but an inconvenience non-the-less. Great video.

@ProjectFarm 5 лет назад

Great point! I should have mentioned that! Thank you

@tomasmolnar2890 5 лет назад

it is not minor if you forget to mix it :D

@kutrokutro6813 5 лет назад

in 4 stroke you have to change oil regularly so where is advantage? 2 stroke is so easy(speakin about good engines no chnese cheap toys) no manifold... in compare of weight and horse power will always win 2stroke...and smoke? If you use proper spark plug & set good ignition its no smoke...

@charlesbrush7042 2 года назад

Quick complete and concise video on a four stroke build with a 2 stroke comparison. Excellent video. Thank you.

@ProjectFarm 2 года назад

You are welcome!

@johncrawford6571 2 года назад

Thanks for sharing this! I have a 4 stroke on a Macargi beach cruiser bike. It has some ape hangers on it. Very comfy! Pulls my 220 lb carcass down the street at 32 mph. I had it built 7 years ago. I left it outside for a couple of North Dakota winters, so now it needs work. Before that, it ran like a charm, started on 1st or 2nd pull ALL the time. I ran it to and from work (5 miles total) everyday for a summer. Each week I cried as I put between 97 cents and a 1.16 in the gas tank. 25 miles for around a buck? I`ll take that! By the way, that was in Colorado at 6500 ft elevation to boot. The engine made pedaling on the hills easy. Thinking about building another one . . . . .

@ProjectFarm 2 года назад

You are welcome! Thanks for sharing.

@johnmajka3711 2 года назад

Ya these ND Winter's are brutal, Especially this last winter. We just got about 3 feet of snow, a few weeks ago here in Rugby ND. My Honda 450r is still half buried in snow lol.

@boddberlstein2758 2 года назад

"carcass"...thank you for the belly laugh!

@johncrawford6571 2 года назад

@@boddberlstein2758 Ha, ha! You're welcome!

@Akotski-ys9rr 4 года назад

I feel like I’m going to die going 25mph on a bicycle but I can’t imagine going 37 mph

@ProjectFarm 4 года назад

Thanks for sharing.

@connorray9801 3 года назад

i had my engine blow at 40

@Agavegaming 3 года назад

@@connorray9801 yikes, did your rear wheel lock-up?

@arturos.l.2248 3 года назад

I've gone 20mph on pedalling

@connorray9801 3 года назад

@@Agavegaming yep, i saved it though

@AdventureFreak86 4 года назад

Man, I have throughly enjoyed your videos since stumbling onto them a few weeks ago. Great content, no flashy "youtube" voice, and you never take endorsements. Perfect channel! Proud subscriber!

@ProjectFarm 4 года назад

Thank you for the kind words!

@seedlessgrapes2605 4 года назад

Welcome 2 tha team

@bigtsperspective5831 Год назад

Your channel never stops amazing me . Almost anything I’m curious about, You got a good video on. Ya need a raise . This channel is fantastic!!

@ProjectFarm Год назад

Thanks and you are welcome!

@FromSaultoPaul 2 года назад

With the chain tension, you can put a pin or bolt through the frame to keep it from moving or weld a flat steel on the bottom. Drill a hole to put your bottom bolt through it. Both will keep it in place.

@ProjectFarm 2 года назад

Thanks for the feedback.

@humanmale4610 4 года назад

i'm probably going to end up with a 2 and 4 stroke and an electric....i don't need them just want to build them! lol

@ProjectFarm 4 года назад

Nice to have all 3!

@humanmale4610 4 года назад

Of course I'm going to ride them like a rented mule

@AdrianGtz 4 года назад

I’m planning on doing a hybrid with a 212cc and a 1000w front hub, having to run the hub off the engines power and a capacitor to the battery lol

@capcloud 3 года назад

@@AdrianGtz that would be a cool prius bike

@LordMarcus 3 года назад

That's what I do, too.

@joshuazoldschool4720 3 года назад

Thanks for posting this... I've been wanting to build one myself for some time but was a little intimidated by the complexity of the job, having never done a project like this before... But, the easy, straight forward way you did it have me the confidence to take the plunge a give it a go. I think...lol👍😃

@ProjectFarm 3 года назад

You are welcome! Thanks for sharing.

@balloney2175 2 года назад

We learn from mistakes, and practice makes perfect.

@Fred_the_1996 Год назад

So how did it go?

@thomasfx3190 2 месяца назад

I know this is an older video but I really liked it, I enjoyed how you compared the two and the build for the 4-stroke was very helpful.

@ProjectFarm 2 месяца назад

Thanks! Glad to hear!

@stevemoore6245 2 года назад

this is cool , i had a very small 2 stroke car from Subaru in 1971. 2 clylinder it had a snowmobile engine.I also bought a 1967 Saab 96 with a 3 cyl. 2 stroke, it was an off road monster, both hill climbed. great milage on both.

@ProjectFarm 2 года назад

Thanks! Thanks for sharing.

@kleetus92 5 лет назад

7:08 Removing that heat shield is the opposite of what you want... the motor has a built in fan, and that shroud is what keeps the air in contact with the cylinder cooling fins... now, the air blows out of the fan, and just goes wherever instead around the cylinder like it's supposed to...

@ProjectFarm 5 лет назад

Great point. Thank you

@kd5byb 5 лет назад

Exactly! I was going to make the same comment - keep the heat shield... :)

@___j______b___2069 5 лет назад

That little honda clone engine was designed for stationary work, running a generator for example. Taking the heat shield off shouldnt hurt anything as long as you dont let it sit for a long time without moving. Just my .02, Happy riding!

@BeingMe23 5 лет назад

But! The small gas engine lawnmowers turned the head facing forward in the 1980s to add in cooling when the mower was in forward motion. So in this situation the exposed head fins (like on a motorcycle) WILL ADD in a cooling via air from the bikes forward motion. But I would run a synthetic oil Royal Purple HPS 10/30 to reduce engine wear and increase hp/torque and reduce fuel consumption.

@lengerer 5 лет назад

I like how you said downside is replacing 3 front sprockets with one. No stress you got a motor!

@MegaPoxie 3 года назад

I see China makes electric conversion kits for bikes, it would be great to compare their power, range, and ease of assembly. You have one of the best channels on RU-vid, look forward to the next project as always.

@ProjectFarm 3 года назад

Thanks so much! Thanks for the video idea.

@therealgodsjoshuamatthew7633 9 месяцев назад

Both bike builds are amazing. I wish I as knowledgeable as you for installation. Great job!

@ProjectFarm 9 месяцев назад

Thanks!

@DavidHolmgren-vg7yz Месяц назад

I just finished a 4 stroke like in your video. Thanks a lot for your help. JEEZ! Wish I had suspension.!

@ProjectFarm Месяц назад

Thanks for sharing!

@Boemel 5 лет назад

Now electric bike kit ? I got a second hand one only 250watts but its awesome having to hardly pedal at all and whizz by everyone in total silence. My no1 tip: don't use a cheap old bike, get a nice comfortable touring bike with hydraulic fork and spend a little more on tires, mine are Schwalbe Marathon totally worth it and very comfortable.

@ProjectFarm 5 лет назад

Great video idea!

@markusstrobl1067 5 лет назад

@@ProjectFarm Yeah, adding an electric bike kit and comparing it to the 2 & 4 stroke would be great.

@LesAventuresDeTigRRe 5 лет назад

I got Schwalbe Big Ben on my ebike. Smoothest ride ever! I always wanted to test some Aliexpress/Bafang bike kit, but was always afraid to try! If you test an electric bike kit, please go with a pedal motor and not those crappy wheel motors

@ricksimpson2167 5 лет назад

I watched a video a young kid done,, he used I think it was $139 cheap eBay electric bike kit. But he used three 22.2. volt batteries for a drone. For a total of 66.6 volt,,. On a 48 volt Hub motor,, it was powerful and had a extremely long range but mainly it could climb steep hills with no problem,,,. And a electric motor loves the extra current,,. I think the batteries were about$40 a piece,,. ??? Definitely the best bang for the buck power-wise speed-wise torque and super quiet,,,. I'm going to do one and add a two stroke gas motor,,,. That way I can go anywhere and be legal,,,. !!!

@ricksimpson2167 5 лет назад

I think it was a 500-watt motor,,. From my research anything less is junk,,,. And pedal assist,,. And all those electric bikes are way too expensive,,. And replacing their batteries is to,, one of the biggest cost,,. Build your own I definitely will,,,,

@budthatsmyrealname 5 лет назад

6:41 "were gonna modi-fry..." lol

@kiyoponnn 4 года назад

gotta modifry the true stroke engine

@evanwickman9455 4 года назад

Lmao

@robertkubrick3738 4 года назад

@@kiyoponnn True smoke engine.

@reubenbos5850 4 года назад

Lol

@disguy4729 4 года назад

@kay van comma after can't

@waynegilchrist1596 2 года назад

Another excellent comparison. Very informative and very well done. Thank you!

@ProjectFarm 2 года назад

You are welcome!

@anthonyxuereb792 2 года назад

The bike test run reminds me of Harry's Garage videos when he takes his exotic cars for a spin, I also like the fact that it started so easily to.

@ProjectFarm 2 года назад

Thanks for sharing.

@slipknotfan8017 4 года назад

Nice to finally find a video for the 4 stoke that is in English and he explains it

@deusexaethera 5 лет назад

The 4-stroke engine produces more torque and has a wider powerband, even if the _peak_ horsepower is lower than the 2-stroke engine, because the 4-stroke engine has valves to keep fresh air and fuel from leaking out through the exhaust at low RPM. Also, the 4-stroke is less annoying to listen to at full-throttle for long periods of time.

@ProjectFarm 5 лет назад

Great point. Thank you

@deusexaethera 5 лет назад

@@ProjectFarm: On a related note, this is why 2-stroke snowmobile engines have exhaust valves, unlike most 2-stroke engines -- to widen the powerband by preventing fresh air and fuel from leaking out through the exhaust at low RPM. If you've ever tried to drive through snow, you know you can't afford to have a lack of low-RPM torque. I wonder if someone offers a 2-stroke valved engine that's small enough to attach to a bicycle?

@turbolq4 5 лет назад

@@deusexaethera That's not how 2stroke exhaust "valves" work. The piece you are referring too is called a power valve. All it does is reduce the overall surface area of the exhaust port at low RPM. It does not eliminate air leakage or movement, nor is it intended to.

@deusexaethera 5 лет назад

@@turbolq4: It seems you are correct. I could've sworn I saw a schematic of a 2-stroke engine with a proper pushrod-actuated poppet valve for the exhaust once upon a time, but I can't find it now. Maybe it only worked well on paper and was abandoned, I dunno.

@oldwolf9403 5 лет назад

You may be thinking of the Detroit Diesel design from the mid-70s. Used a top end set of valves, a blower, and a piston system that operated as the intake valve exclusively. When the piston goes down on that system, it opens the overhead valves, pushes all the exhaust gasses out via the blower, then closes the valves and pre-pressurizes the cylinder. As the cylinder approaches top dead center, the fuel is injected, and auto-ignites. @@deusexaethera

@andrepastor4844 6 месяцев назад

Awesome thanks. This is something my kids and I can do over winter.

@ProjectFarm 6 месяцев назад

You are welcome!

@poopagore 2 года назад

great video man! so much work is put into your stuff man, much appreciated!

@ProjectFarm 2 года назад

Thanks!

@franscartoons 5 лет назад

I'm waiting for the V8 bike conversion 😃

@ProjectFarm 5 лет назад

lol. That would be impressive!

@Sharpless2 5 лет назад

Seeing how small the 4-stroke is, i think they can do V8 too lol...

@OrderOfTheRedstone 5 лет назад

Same,but then again the power would warp the cheap aluminum frame

@Kris_M 5 лет назад

It will pull out the spokes first a guess...

@rosiehawtrey 5 лет назад

Don't tempt him... There are 125cc custom v8 kits out there - but they're *horribly* expensive. And I'd love to see a coppers face when that buzzed past his patrol car...

@UbiquitousOne 4 года назад

Duct tape over the bolts to hold them in place - GENIUS!!!!!

@causwayspeedway 4 года назад

That and compressed air to remove grips - GENIUS!!!!!

@Chickentendaz 2 года назад

Some of my favorite videos are the ones where you make something run from nothing, and then test that! Makes me do a happy dance..

@ProjectFarm 2 года назад

Thanks for the feedback.

@billhayward2668 2 года назад

Great video! I would have liked to see you filling the crankcase and what type of oil is recommended. Very well done!

@ProjectFarm 2 года назад

Thanks and you are welcome! Thanks for the constructive feedback.

@bassjumpblues3631 4 года назад

I swapped out a two-stroke for a four-stroke motor on my beach cruiser. The four-stroke with a 44 tooth sprocket does 37 MPH and can barely tell if it is running it is so quiet!. I love it but it is a dog! it burns clutch more than I prefer.

@ProjectFarm 4 года назад

Very nice! Thank you

@leonelalanis4060 4 года назад

Where can I buy a 4 stroke engine like that

@elvisbynum9218 4 года назад

Where did you order the 4 stroke and how much was it

@RobertJeffersonBased 4 года назад

I'm sure you like you're top speed, which is an impressive speed, but I'm sure the clutch would be happier with a bit shorter gear ratio! I got a 56 tooth sprocket for my upcoming bike. That may be a good thing for you... or just pedal up to speed a bit more. Good luck

@fun_ghoul 4 года назад

My electric does the same speed, and doesn't kill you with fumes. Guess you don't carry any kids in that, eh?

@mustie1 5 лет назад

l have never tried the 4 stroke kits but have on the 2 stroke, the build quality on the 2 stroke is real cheap with lots of failures, plus most states limit you to under 50 cc so they are not legal if they wanted to bust your balls, , that 4 stroke kit supprised me on its top speed, one question l was thinking how did they do when pulling a hill?, thanks again for making great videos, you are at the top for me,

@ProjectFarm 5 лет назад

Hi Mustie1! Great point on the 2 stroke kits. This 4 stoke kit seems to have a very good engine on it, but I'm not sure how the clutch will hold up. The 2 stroke did much better on the hills, but the 4 stroke would do a terrific job with a larger back sprocket. I really enjoy your videos and congratulations on 200K subscribers!

@stevenwithanS 5 лет назад

Hi, Darren, I watch all your videos too.

@justinlee3647 5 лет назад

Hi mustie1 I’m a big fan

@VasilyBuilds 5 лет назад

2 strokes are only if you are a BO$$!!

@Minecrafter-uh6qv 5 лет назад

ez to fix though, just gotta give it that, lots of cheap parts to upgrade them with too!

@russelldrew6524 Год назад

I put the two-stroke on it on my mountain bike it's a lot of fun and I love it I would like to try the four-stroke one also but any suggestions from you would be great I like your video I like all of your videos you're very intelligent human being I was an aircraft mechanic in the military for 15 years and I always enjoy learning new things thank you

@jacobmcconnell403 Год назад

are they a lot of maintenance? cause i’m just trying to build one and not have to work on it all the time

@Mikegastaldo Год назад

Go with a staton friction drive and a Honda gx50nts3 you will not be disappointed

@natehill8069 10 месяцев назад

For a comparison data point, I used to have a Honda NC-50 Express. This was a 2-stroke (oil injection, no mixing required) 49cc single speed motorcycle that looked just like a moped but without pedals ($325 new in 1978). It topped out about 28mph on level ground. Given a hill it would accelerate to about 35 mph and could sustain 32mph thereafter on level ground. It got about 175mpg and went 1,000 miles on a quart of oil, no visible exhaust. Used to find almost enough change laying in the curbs to fuel it (it stopped on a dime when I stopped FOR a dime).

@ProjectFarm 10 месяцев назад

Thanks for sharing.

@MrWhitetailtracker 5 лет назад

Next video, 4 Stroke with shaved heads bigger valve's, new racing carburetor and race fuel with a bigger wheel sprocket. 🙂

@ProjectFarm 5 лет назад

Great video idea!

@jessaphillips2846 5 лет назад

you want him to break his neck popping wheelies out of control lol it needs a smaller rear sprocket not bigger that way you can get more top speed out of the bike even if the engine lugs a bit down low you can augment it with pedaling and then when the engine can take over you will go faster.

@MrWhitetailtracker 5 лет назад

@@jessaphillips2846 Yes but it depends on the size of the front sprocket as well. Really be best if it we setup to change gears. Would be the best of both worlds. 🙂

@thomasjaszewski64 5 лет назад

Cheap electric kit will smoke these stink pots. Yawn. Thanks for the great video!

@antonisautos8704 5 лет назад

With the proper stuff you can actually get the power to the right side of the bike and utilize the bike gears to give you good take off and good top end. I did this with a grubee 10g shift kit on a skyhawk gt2 frame. It's a bit costly but it is well worth it. Fyi if you plan on doing it yourself you will have to have more than just a basic set of sockets and screwdrivers. I also recommend the shimano 7 speed cassette mega range 14t-34t. It's a bad ass bike. If anyone wants to know I can post a link to my page with photos of said bike.

@mdw6571 4 года назад

Thank you for another fantastic video! I have learned so much from your videos, your intelligent, thoughtful and thorough testing and insight has influenced my decisions on many products over the years. Please keep up the great work and we can all learn together!

@ProjectFarm 4 года назад

Thank you for the feedback!!

@dawinner777 2 года назад

Love your videos! Your hard work and honesty is so much appreciated. Can you do a video on your equipment and editing process so we can learn how to do videos from an expert

@ProjectFarm 2 года назад

Thank you for the video idea!

@John-vw4qz Год назад

Thanks, answered the few questions I've had for some time now...

@ProjectFarm Год назад

You are welcome! Glad to hear!

@justinattard3937 3 года назад

One big advantage that the 4 stroke has over the 2 stroke is that you can literally pull up to a gas station with the 4 stroke fuel up straight to the tank. Where as the 2 stroke you will need a little gas tank of premix with you at all times for long trips etc... Really Enjoyed this video Project Farm!

@ProjectFarm 3 года назад

Thanks!

@TheStp77 3 года назад

Sometimes the easiest fixes are brilliant at the sane time. I have a tendency to over think things sometimes, that piece of pvc pipe was great thinking i would have probably tried to relocate them and ended up with no brakes at all😂

@raven_glass 2 года назад

This is great. Haven't seen anyone mention this and while I typically prefer 4 stroke, with a bike like this would take the 2 stroke in case you dump the bike or want to put it in the back of a car or truck so you don't have flooding issues. Obviously adding a fuel shutoff would help with this.

@ProjectFarm 2 года назад

Thanks! Thanks for the feedback.

@WinstonMyers-il5dl 5 месяцев назад

I’m currently doing my 1st ever engine install on my tricycle , and I chose a engine (100cc 4 stroke) that let me keep my rear storage basket . I basically used what I knew and common sense to get where I am on the install because nobody does trike videos without an engine that takes the rear axleso do that I’d love to seebit

@ProjectFarm 5 месяцев назад

Thanks for the feedback.

@TR1ppl3 5 лет назад

The 4 stroke is way more quiet. I like it, the 2 stroke makes a whiney sound if it makes sense. The 4 stroke makes a "deeper" sound and its not annoying at all. Nice video!

@ProjectFarm 5 лет назад

Thank you!

@Deviant365 5 лет назад

The two stroke sounds like a chicken chaser, the four stroke sounds much better

@prushimush 5 лет назад

Two stroke reminds me exactly of a chainsaw. If you dream of riding a chainsaw it seems like a good choice.

@Super-225 5 лет назад

I have used both 2 and 4 stroke. I honestly found the 2 strokes dont last all that long. They will last for a little while as long as you dont beat the heck out of them. The big problem I saw with the 2 stroke is that the oil does not easily get to the crank bearings and they are oil starved alot because of the design. The crank bearings are always the first to go. I've used a few of these 2 strokes and they have all failed the same way even when richening the oil mix. Plus they run a little too hot. The 4 stroke is a much better engine, but there is one BIG downfall. The gearboxes on those are total crap. All that is inside it is two sprockets and a very very small chain that stretches out and wears quickly and eventually keeps coming off the sprockets. (Feels like it keeps going out of gear) The gear boxes do not last long AT ALL!! The 4 stroke is the best and longest lasting engine from my experience, but if your gonna get one, get the belt drive kit for it!!!! They do make those kits and they are out there. Toss the crappy gear box it comes with, they are total garbage!! This is from someone whose had long time experience with both engines.👍

@ProjectFarm 5 лет назад

Thank you

@billaugustin7012 5 лет назад

I'm waiting for my new 49cc 4 stroke to come in the mail and it comes with the belt drive, I have been searching for which drive is better, and you answered my question,thanks !!!

@billaugustin7012 5 лет назад

eBay is where I got it,it's shipping from new Jersey to Oregon UPS ground and still isn't here after 10 days already,it was in Illinois a couple of days ago, anyway check eBay out,but look for the belt drive gear box because some do come with the chain drive that you don't want, so just look for 49 cc 4 stroke bicycle engine kits.

@Super-225 5 лет назад

@@billaugustin7012 No problem 👍

@michaelangeletti8382 5 лет назад

@Ian Mangham i got mine from bicycle-engines .com it was 350 U.S. dollars for the whole kit. engine, belt drive transmission, fuel tank, throttle control, chain, wheel sprocket, engine mount, and a REALLY great set of install instructions.

@hungle55901 2 года назад

I love it. Thanks I love to watch your comparison videos

@ProjectFarm 2 года назад

Thanks!

@IrishMike22 Год назад

Dude. I just found your channel the other day and I'm HOOKED. Keep up the great content my friend 👍

@ProjectFarm Год назад

Awesome! Thank you!

@mtavernari 3 года назад

Ty for your great videos! After watching your video, I built a 2stroke motor bike for my kids. Although not easy, to get it started, needed to confirm spark with ngk plug, and rebuild carb jet, and clutch. Great content 👌

@ProjectFarm 3 года назад

That is awesome!

@ExaltedDuck 5 лет назад

Dumping the sprocket gave me a chuckle. I had a 21 speed mountain bike in college that I really only used about 4 speeds on. Always the biggest sprocket up front and the smallest few on the back. I tried to pull out of a bike lot one day with the biggest rear sprocket engaged and was confused by a loss of steering. Just moderate pressure on the pedals unintentionally brought the front wheel a couple inches off the ground. It was fun being young and strong.

@ProjectFarm 5 лет назад

Thank you

@pauls466 5 лет назад

If you lift the front wheel in the highest gear , it make's you stronger than Eddy Merckx

@rickbarker6699 Год назад

Getting ready to do a kit. Thanks for your input I will be going with a 4 stroke engine.😛😛😛

@ProjectFarm Год назад

You are welcome!

@motorx225 2 года назад

I think your videos are really cool. I like how you explaine everything. Keep up the great work.

@ProjectFarm 2 года назад

Thanks, will do!

@uppitywhiteman6797 4 года назад

I have been trying to make up my mind. Thanks this was the exact comparison I needed. I'm going 4 strokes quieter, less smoky (neighbor-friendly)& 4-strokes last longer. I am a big guy, but speed is not an issue- not pedaling is LOL

@sivansharma5027 5 лет назад

Great video! About losing your mountain bike gears, I myself bought this same 4 stroke kit, and I installed in such a way that I could still use all front and rear gears. Instead of attaching the motor to the rear wheel, I bought a 52 tooth (I think it was 52 or maybe 54) sprocket and mounted it opposite to my front set of gears, i.e the left side of the bike. My design was a little bit lazy- I mounted the engine quite high to allow for everything to fit on the suspension design of my bike and the fuel tank is mounted on the handlebars XD I also didn't bother with attaching any pedals (welded on some foot pegs) as the 52 tooth gear lets the bike take off when in lowest gear. Actually, I think I just leave the back set of gears on the lowest ratio and use the front 3.

@ProjectFarm 5 лет назад

Great tip on the way you installed the kit! Thank you!

@gopinathgopinath6294 2 года назад

Watching your all comparison videos over and over again Very nice content

@ProjectFarm 2 года назад

Thanks!

@EpicATrain 7 месяцев назад

Thank you! I was thinking about getting a motorized bike.

@ProjectFarm 7 месяцев назад

You are welcome!

@erontusk3984 4 года назад

One of the best youtube channels, you deserve way more exposure.

@ProjectFarm 4 года назад

Thank you very much!

@axelbuckets3858 4 года назад

I agree

@adognamedbird 3 года назад

FYI sprockets just like the one in this video with more rectangular slots for the hardware; you can use carriage bolts because they have a square bottom underneath the dome cap. This allows for you to get a perfectly aligned sprocket every time!

@ProjectFarm 3 года назад

Thanks for the feedback.

@jveronica812 2 года назад

Thanks for being good at articulating and explaining everything very helpful

@ProjectFarm 2 года назад

You are welcome! Thanks for watching!

@alliscrawler Год назад

Thanks for your great work! Really enjoy your shows.

@sandia2beaumont 3 года назад

Idk much about mechanics but enjoyed watching this natural genius at work!

@ProjectFarm 3 года назад

Glad you enjoyed it! Thanks for watching.

@sam-rs8wg 5 лет назад

I own the two stroke kit, and I want to stress the con of the clutch. It is heavy, sensitive, and starting that engine is horrible. Riding it with no motor help is nearly impossible. A neighbor of mine has the 4 stroke kit. It is his main vehicle, and he rides it to work every day. 3000 miles a year, and he does great on reliability. Don’t bother with the two stroke, save some extra money for the 4

@ProjectFarm 5 лет назад

Thank you for this information.

@Minecrafter-uh6qv 5 лет назад

heavy? no, sensitive? possibly, starting? , only if you try to start it and not pull the clutch.

@CCW1911 5 лет назад

Do you have to hold the clutch in while pedaling? If so that would be a giant pain IMO.

@Minecrafter-uh6qv 5 лет назад

CCW1911 you only peddle when starting the bike

@CCW1911 5 лет назад

@@Minecrafter-uh6qv I was thinking about running out of gas or having some problem with the gas motor, if you had to ride it you would have to hold the clutch in?

@peterweller8583 2 года назад

Well for being a modified bicycle they both did what you'd expect. My question is how did they turn and stop at speed. I noticed with my bike build that the tires would depart from contact with the road maybe a quarter of the time. Making it a challenge to safely maneuver. My build was on west coast chopper sting ray. I was always going to put a suspension on it front and back, Oh and mine was a mantis tiller motor and worm gear and the shroud bolts were employed as a stressed member in the frame I removed the crank.

@robertotorres7600 2 года назад

I didn’t expect all the great instructions thanks

@ProjectFarm 2 года назад

You are welcome!

@davidk7544 4 года назад

This was great, I didn't know these engine conversions even existed! Thanks for making the video!

@ProjectFarm 4 года назад

They are a lot of fun! Thank you

@curtnicholson7771 5 лет назад

Did you ever see way back in the beginning of bikes and in enters making powered bikes and early motor cycles one inventor came up with what I would call a motorbike with the motor built inside of the wheel. It's been probably twenty years ago that I saw the article and pictures and I cannot remember now which wheel that it was actually built into, but it appeared to be quite a piece of engineering and I always wished that I would have loved to see how well something that that would have operated! You did a very nice comparison of the two pointing out the advantages and disadvantages of each and with your fairly thorough explanation I'm sure you make a lot easier for a person wanting to go this route for some cheap transportation over walking everywhere to make their decision on which to purchase for their needs verses probably just a guess otherwise. I think a lot of people would choose according to cost but after hearing your assessment may choose otherwise. So another fine job by you again!

@ProjectFarm 5 лет назад

Thank you very much!