No video :(

Honda Ignition Key Won't Turn: Steering Lock Assembly Replacement and Immobilizer Programming

Подписаться 109 тыс.

Просмотров 678 тыс.

50% 1

In this video, I show you how I replace a Steering Lock Assembly on a Honda and reprogram the Immobilizer system. This procedure is very similar on many Hondas with an ignition key. The exact vehicle in this video is a 2003 Honda Civic EX sedan.
Supplemental Restraint System (SRS) Airbag warning: SRS Airbags are a critical safety component and can deploy with enough force to seriously injury someone, even with the battery disconnected. Hammering or working near an SRS component can create a situation where an airbag can accidentally deploy. I do NOT recommend working on a vehicle SRS Airbag system unless properly trained. This video is for entertainment only.
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
Buy Big Dog50001 T-Shirts, coffee mugs and other gear here!
bigdog50001automotive.mysprea...
/ bigdog50001
/ bigdog50001
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog500... (As an Amazon Associate I earn from qualifying purchases).
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
Tools and parts:
Autel Scan Tool (Updated Version): amzn.to/31zakmX
Honda Steering Lock Assembly Honda 35100-S5A-A82: amzn.to/2Z23BjO
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2018 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.
Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Опубликовано:

19 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 325

@BigDog50001 6 лет назад

*Tools and Parts* This channel earns a small commission using these links - at no additional cost to you. Autel Scan Tool (Updated Version): amzn.to/31zakmX Honda Steering Lock Assembly Honda 35100-S5A-A82: amzn.to/2Z23BjO

@EpicGamingEct 2 года назад

with those two headless bolts out why not grrind a slot in each one afterwards so you can just use a flat head screw driver if it happens again !!!

@archiegillett8211 8 месяцев назад

⁷ⁿ😮😊😮

@killer2600 4 месяца назад

@@EpicGamingEct Because you make a mess grinding stuff inside the car and those are security bolts. The head shears off to keep people (thieves) from easily removing the ignition/steering lock. If you want someone to defeat the lock with common tools in the future, you might as well use common bolts from the hardware store instead of the supplied shear bolts - no mess from grinding and easier to use a ratchet and socket than a flat head screwdriver.

@Daninbristolbay 4 месяца назад

@@killer2600 no Epic is saying with the bolts out of the vehicle then grind a slot for replacement. I may try that but have some new spec bolts on order too. I have seen that suggestion on the Ridgeline forum too.

@Monkeybuzzness 2 года назад

This is probably the most SPOT on video I've seen in a while! VERY detailed and perfect!! I had the same issue with a 2004 CR-V and BAM...new ignition switch installed! THANK YOU!!!!!!

@BigDog50001 2 года назад

Glad it helped!

@nerymontano954 2 месяца назад

[2004 HONDA CIVIC EX] Can't tell you how helpful this video was in solving my issue. The dealer wanted $1400 (parts and labor) and O'Reilys wanted $850 (part only). Amazon had the part for $60 but not 100% compatible but got the job done. Thank you again and highly recommend anyone who needs a cheap fix

@SteveMonty1976 8 месяцев назад

Worked like a charm. Did it on a CR-V and re-used the immobilizer, programmed the keys with my scan tool and running great! Great video...appreciate your work!

@petergiacomantonio98 Год назад

Thanks. It was two weeks between disassembly, re-keying and re-addembly for me. Your clear information about two "wood-type screws at the top and one machine screw at the bottom" for the steering column cowling cover was very helpful as it's dark and cramped in the foot well. I filed the catching pawl off the sticking wafer and left it in the lock non-functionally so that I didn't lose it for possible re-furbishment later (hopefully avoiding having to re-key the locks). Thanks again.

@heatherofthe7 4 года назад

Thank you thank you thank you!! I’ve got a 2004 odyssey. It’s a little bit different than the one you showed but close enough. You explained/showed every step really well and your voice was easy to follow. Great job! I actually took it a step further and went into the lock cylinder and removed the damaged parts. I couldn’t have figured out how to get it off without your video. Thanks again!

@BigDog50001 4 года назад

Glad it helped, thanks for the comment!

@marx769 Год назад

Thanks for taking the time to make this video! My mom's crv is doing this and don't trust the repair places to treat her right.... sucks that two keys will be needed moving forward, may check with the locksmith. Much appreciated!

@eshiveley 2 года назад

Thank you very much for this. I removed my lock cylinder thanks to your instructions and had a locksmith repair it for $40. It probably saved me a couple hundred dollars.

@onasty177 Год назад

He removed the assembly not the cylinder

@1joshjosh1 11 месяцев назад

Your locksmith repaired it and it worked ??

@davidhedwall9536 2 года назад

Not only was this video very informative, it was very well produced. Great images, camera angles, techniques and explanations. 5 Stars! *****

@barrykew9756 4 года назад

Thank god , finally a Video telling people to disconnect the battery terminal first. Listen to his advice.. take care and stay safe You might need your radio code

@BigDog50001 4 года назад

👍

@larrymaples4880 3 года назад

Clear and straight to the point . Easy to understand. Awesome video .

@cliftonmortimer194 Год назад

You saved me I was stuck in a supermarket yard this was really nice I appreciate your help

@Daninbristolbay 4 месяца назад

I am working on a 2008 Ridgeline here in 2024. My Ridgeline steering column may be a bit more complicated but this gives me hope. This is the most thoro video I have found - especially about how to get to and remove the housing. I live in very remote Alaska - no Honda dealers not lock smiths. I hope to remove the whole housing and take it to a locksmith to rebuild using a good original key. I'll have to trash the worn key. But you explained both options - very very good thank you.

@BigDog50001 4 месяца назад

👍

@wyattoneable 6 лет назад

Great explanations of the steps involved. Any one who owns this car will be well ahead of the game if they watch this video.

@BigDog50001 6 лет назад

Thank you Wyatt!

@Longtrailside 6 лет назад

Agreed! Great video and repair.

@TheDisgruntledMechanic 6 лет назад

Working around any airbag system I always wait awhile (10 minutes or so) to make sure it has powered down. Good video as always Dave.

@BigDog50001 6 лет назад

Thanks MIke!

@Daninbristolbay 4 месяца назад

YES!!! Thank you so much for providing info on how to get to the switch housing bolts and how to get it off. Too many videos just show working on the switch with the housing already removed from the steering colurm. Thank you!!

@BigDog50001 4 месяца назад

👍

@chrisjob1556 Год назад

Thank you. I used your video to fix my steering lock today.

@Forgiven209 5 лет назад

Great info on the srs unit. I watched a few videos and they didn't do that. This is my number 1 now, thank you sir.

@BigDog50001 5 лет назад

Thank you, I appreciate the comment!

@Forgiven209 5 лет назад

Thanx, now i got a fun project to do this weekend.

@collecteverything9543 7 месяцев назад

advice on using spare key worked for me .. thank you from the future (past)

@alandudley981 3 года назад

This was a great video, for me the tumblers were worn but with the new ignition module I switched the new tumbler with the old ignition and it still would not turn, the whole module was shot. Thanks for the video, it's great to have my car back!

@alandudley981 3 года назад

You can also order the lock tumblers on the internet for honda and change the tumblers to match your original key or get a locksmith to do this and then you have one key that does it all

@BigDog50001 3 года назад

👍

@Steven-mk4gg 2 года назад

Thank you very much sir. Saved me a ton of bucks having the dealership pull this off and put it back on. I was lucky enough to have mine rebuilt, so no new programming.

@BigDog50001 2 года назад

👍

@BigDog50001 5 лет назад

Be sure to subscribe for more tool and car repair videos! ru-vid.com The Big Dog 50001 Automotive Channel Store can be found here: (This channel earns a small commission for purchases made through these links - at no cost to you) www.amazon.com/shop/bigdog50001automotive twitter.com/BigDog50001 instagram.com/bigdog50001/ Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses.

@andyk4146 4 года назад

The trick at 2:00 worked!!! My 03 Odyssey key would NOT turn (after weeks of fiddling with it to get it to work, it just stopped completely). So I borrowed a friend's Pilot key, stuck it about halfway in, and my key worked right away! Now I'm just going to keep it in the ignition and lock the doors from the outside :). Thank you!!!

@BigDog50001 4 года назад

Glad it helped, thanks for the comment!

@andyk4146 4 года назад

@@BigDog50001 Thanks for the video! Today I screwed up and turned the key back to the 0 start position, and now the key won't work again and the trick doesn't work anymore :(.Tried with the same friend's Pilot key and a co-worker's Civic key.

@bigpapa247 9 месяцев назад

Thank you!!! You just saved me hundreds of dollars!!!

@chrismissedtree 3 года назад

You Sir are a hero. Thanks for the video!

@BigDog50001 3 года назад

Thanks 👍!

@joseramos1949 2 года назад

Exelente video desde Honduras me sirvió mucho ver este tutorial saludos y thanks

@mikeacker7905 5 лет назад

This is an excellent video esp for those that aren't very mechanical. I do like to know what I"m paying for when work is done.

@BigDog50001 5 лет назад

Thanks for the comment, I appreciate it!

@DannyboyUpstate Год назад

Great video. A friend of mine just brought his CRV into the dealer for this repair. $1400.

@arthurfricchione6614 6 лет назад

Thank you for the info on the air bag having an internal electric source. The 3 minute wait period. As always great info and excellent video thanks 👍👍

@BigDog50001 6 лет назад

Thank you!

@hectorbecerra7981 Год назад

Thank you very much for this info! Really helps

@matthaug3104 2 года назад

Thank you bro just what I needed to hear thumbs up!

@BigDog50001 2 года назад

Thanks 👍!

@adrian209StOcKtOn 4 года назад

Thanks bro I was running late for work 👌👌

@BigDog50001 4 года назад

Glad it helped!

@silky-apexandmore3836 3 года назад

Great video… you are a beast sir!

@45AMT 2 года назад

A trick with those sheer bolts that a locksmith taught me. Take a drimel or like tool (small grinder cutting tool) and cut slots in the head straight across and you can take them out (or in) with a flat head screw driver.

@BigDog50001 2 года назад

That is another way, just have to be careful with metal shavings that might get everywhere. Thanks for the input!

@ericherbertwallis Год назад

Thanks to you I did it! Thank you.

@klausmuller3509 Год назад

Life saver i just wiggle it and it worked saved me some bucks.....

@annjones6543 Год назад

Found the key I was told only un lock the door and the gas tank , but I actually started the car as well. Didn’t have a Key Fob but it works

@libin8m 8 месяцев назад

Thanks bro. Very well explained.

@ceedetroit482 4 года назад

Great video big help thank you so much

@BigDog50001 4 года назад

I appreciate the comment, thanks!

@jccmine 3 года назад

Thank you BIG DOG!! I literally just used your method to unjam my ignition. I didn't have any 10w40 but I had some pink Oil hair glosser with the same consistency that did the trick. I own a 2002 LX 470 and I didn't want to invest in a new assembly so I'm very excited about this.

@BigDog50001 3 года назад

👍

@todcornellier1689 3 года назад

I just want to say thank you..My tumblr crapped out 30 minutes away...I used the door key,WD40 and pipe cleaner to get the ignition to turn..None of it makes any sense..Worked thru every quarter turn for the key?..My key wont come out but the car starts like nothing..I have to say thank you

@Mohammad-lf7vb 6 месяцев назад

Excellent video. I did a honda Fit 2016 model. The two break off bolts are REVERSE thread on the honda 2016 Fit model. I used a chisel and hammer for many hours and they would not turn because i was chiseling them counter clockwise. I realized this after drilling them out. Had i known that they are reverse thread i wouldn't of drilled them out and had to purchase 2 more bolts off ebay etc Good video. If i was to do it again i would find the compressed pin and remove it only and replace just the key area. I couldnt find the pin as it was different from all the videos being a 2016 Honda Fit and ended up doing it the hardest way. I found the removal pin location after the whole unit was removed.

@BigDog50001 6 месяцев назад

Thanks for the comment!

@Daninbristolbay 4 месяца назад

OMG I'm about to work on a 2008 Ridgeline. I will keep in mind I may have reverse threads!!!! Damn Honda makes all this stuff so bloody secure but insists on usind crappy lock cylinders!!!! Makes no sense to me.

@theohlinsguy4649 Год назад

Very nice! Thanks!

@solafide8503 5 лет назад

Alternate idea that may work for some. I had a locksmith come and make a key without programming it. He put the key on vice grips an worked it into the ignition cylinder. It took some work but he was able to re break the cylinder and my original key worked again. It was only $100 dollars to make a copy of the key and for his time. Well worth it. Have not had any issues since and I keep the spare in case I need to rework the cylinder to match the key cut.

@BigDog50001 5 лет назад

Thanks for the input!

@kadeshswanson3991 Год назад

What does this mean exactly? That he cranked that key until something broke in the ignition?

@rornowskibreaks5187 2 года назад

Loved the video this just happened to my car I had a question. Can I reuse the old immobilizer with the new ignition and new keys and just have the dealership reprogram the new keys and ignition to old immobilizer? Thank you!

@chopdavis4195 3 года назад

Chuu you just saved my ass bro thanks!!!

@ypapadim 3 месяца назад

Thank you!!!!

@AbdurasaqAdesokan 4 года назад

Good job.... 👍

@BigDog50001 4 года назад

Thanks!

@user-yu2xu8hd2p 8 месяцев назад

What if my steering wheel is locked and key won't turn what is wrong this happen after I switched my ignition switch the battery was not connected. Thank u

@Mid-Ohio 3 года назад

So at the ending where u could take to a locksmith to repair…And they did so how would u put the sheer bolts back on after chiseling the off??….maybe get new ones…after watching this video everything seemed very informative.Thanks just had those couple questions Thanksn

@erikrezlman7900 2 года назад

Great content!! Thanks much!! Does the immobilizer unit, pcb, go bad and/or does it control or talk to original remote key to unlock the ignition? Thanks

@Daninbristolbay 4 месяца назад

I found squirting some Kroil onto the bolts clamping the switch housing to the steering column then waiting a while finally helped me loosed the bolts with a small cold chisel rotating the bolt heads.

@hypno9782 6 месяцев назад

Omg thank you, wiggling it worked

@BigDog50001 6 месяцев назад

👍

@user-vd1jf7tc8z 2 года назад

Huge help my friend

@BigDog50001 2 года назад

Glad it helped, thanks for the comment!

@TailEndCustoms 2 года назад

Hey bud quick question for ya. My key wont go all the way in to turn. Last few days it’s been sticking. I tried wd40, jiggling, turning wheel, nothing worked. I accidentally locked the wheel. I’m trying to pull the plastics to get to the tumbler but can’t get to last screw behind wheel. Is there a way to unlock the steer wheel without the key? It’s a 2012 Honda CRV I appreciate any help

@Para-ni5lx 3 месяца назад

Wow OLD video but very HELPFUL THANK YOU

@BigDog50001 3 месяца назад

Glad it was helpful, thanks for watching!

@Para-ni5lx 3 месяца назад

@@BigDog50001 YES i just finished doing it today and it now works THANKS AGAIN 👏👋✌️

@foureyedstang6035 5 лет назад

eBay has the whole switch like you showed......$70 bucks. I took mine out and was about to take out all the tumblers in the lock so I could still drive it while waiting for new one. Also so I could take it to get the keys programed and not have to have it towed. Easy.

@BigDog50001 5 лет назад

Hopefully it is decent quality, thanks for the input!

@Chunk4402 Год назад

Awesome video very well done!! Quick question I have a Smartbox Auto from Hillman, will that program the new key or what kind of programmer do I need to finish?

@carlosgodfrey9566 5 лет назад

Thanks for your help

@BigDog50001 5 лет назад

CARLOS GODFREY Thank you for the comment!

@jamessingh6488 3 года назад

So I know what to expect, how much would labor ,parts and all on a 2002 Honda Accord cost??? Honest answers please

@michaelyork3933 5 лет назад

Thank you

@BigDog50001 5 лет назад

Appreciate the comment!

@CHIPPOFISHING 4 года назад

will try

@el.gonzalo Год назад

Thanks for sharing. I assume this would this be the same for a 2009 Civic?

@thegoat7043 3 года назад

Hey bro I have a question ok I replaced my starter and my car still won’t crank unless I keep trying and trying is it my ignition switch?

@killer2600 4 месяца назад

The best time to fix your Honda (or any other brand) ignition is the moment it starts acting up/requires jiggling or playing with it to get it to turn. It's cheaper if you fix it early, if the key still can be made to work and turn often a locksmith can repair/replace the lock cylinder for not a lot of money. If your key being worn is part of the problem, as it often is on Hondas, a locksmith can cut a new key to factory specs and program it to the vehicle. The cost of a locksmith doing this on a lock that is just starting to fail but hasn't completely become inoperable is cheaper than the purchase price of this complete Honda ignition assembly and you won't be stuck with two keys for one car.

@extremekilla316 2 года назад

The switch I bought didn’t come with the piece that attaches to the side where you put the key in. On my SI there is 1 white plug on the right side. that doesn’t marry to anything on my new setup. and I saw on my old switch that little box where it used to plug in at. Do I take it off and attach it to the new one? Or is it not necessary?

@blingbling8264 3 года назад

Cut a new key and re-used the old chip which was still good. Had that key for 9 years. Wear and tear was the culprit.

@BigDog50001 3 года назад

👍

@harpalsaib1570 2 года назад

Hi if I was to chnage in on a 2005 EU mk 7 with a another unit of another car would I need to configure the new barrel?

@JPSRose 3 месяца назад

My Jazz/Fit is doing this now out of nowhere and its just not worth spending on a whole new unit. Im wondering if its possible to bypass the immobiliser somehow and put a hidden switch somewhere instead.

@kaikouravoyager1 Год назад

Big Dog..Im havin same issue on my 2003...Im the beginning of the video you show the key being able to turn..was that with the trick with using the other key..I tried that still no joy...Should I get a locksmith first then purchase the new ignition assembly? Awesome video by the way

@royramos2174 10 месяцев назад

Thank you so much

@BigDog50001 10 месяцев назад

👍

@GassyJalapeno 2 года назад

Do you where you can get another immobilizer chip? I tossed it out when I replaced my shell not thinking the buttons is what part that starts the car.

@cameroncline9141 2 года назад

Thanks!

@BigDog50001 2 года назад

I appreciate the support, thank you!

@bruhbruh303 5 месяцев назад

Now question my good sir!! If I go and get a 05’ Honda ignition cylinder hub.. will the same key work in this ignition cylinder? Same year model accord .. just trying to figure for the solution.. before doing it.. thx much and let’s stay geared up car gurus

@toddshaw843 Год назад

Is there anything you can do to get the old ignition to turn. My problem is that the fob is broken off the key, i was going to buy anew fob and change out the key and transponder, but ive got the key glued and tape up on the fob but i cant get it to turn the ignition. Also with the ignition off the car, should it make that the plunger that you line up in the slot on the column to go down when the key is inserted

@brandonabbott829 2 года назад

If I use a second hand key and ignition and install it to replace the old one. Do I still need to program it?

@thefelixpinon Год назад

hi the blows are given in the center of the screw or on the sides of the screw

@Joysingod 2 года назад

My Honda accord steering wheel is locked but the key turns and car starts. What do you think the issue is? Thanks.

@lilralphie9037 Год назад

My civic is currently stuck in a parking lot with same problem and I'm trying to at least get the steering unlocked.. Was this procedure done with steering unlocked already via using that other key the way you did to get it going and in the garage? I guess my question is will I still be able to get it off if steering is locked? I have no access to another same gen honda key. Before when it started getting jammed, the hard part was turning it enough to get the steering unlocked then key turned fine between off/1/2 (or like off 90% off- i wasnt quite pulling it all the way back but enough to cut power to radio etc). If I take the assy off, and depress the steering lock "button" that slides up, I am hoping to be able to turn the key forward again. I wouldnt even mind blocking that button somehow so the steering never locks again ( until I get it fixed properly but I am just trying to get going for now.. )

@cameroncline9141 2 года назад

U saved my ass g ty

@BigDog50001 2 года назад

👍

@Rowdyyy_rod Год назад

Awesome video. Only question I wanted to ask is why not replace only the ignition lock cylinder vs the whole assembly? Is there a test you could do first?

@hectorbecerra7981 Год назад

Might as well do the whole thing due to cylinder in this mechanism and probably close to same price. I’ve done partials of repairs before only to have to go back and do whole thing due to rest is old as well. Listen to end of video, he talks about cylinder also

@blakewood5271 2 года назад

savior wheel was locked wrong watched this and figured it out cause you gotta turn the damn wheel slightly to get it to unlock

@sethmiller-vg2dy Год назад

What was the part called that you ordered? I installed a new lock cylinder but it didn’t work, I think i need that whole part that you unboxed

@Rokits-realm 4 года назад

Excellent video BD. I am not an auto mechanic but i will change this thing out tomorrow in my car. Is there any way to get the keys programmed before installing. Can you rent that scan tool. Would an auto parts store where i buy the ignition have 1 to use? Thanks again BD, Killer video. Do you have any videosd for the rear door lock on a 2005 crv. The lock spun a bit and its not mechanical. I cant even get the door open now.

@BigDog50001 4 года назад

I am not aware of being able to rent a scan tool capable of programming these or programming beforehand. Another (cheaper) option is take lock assembly out and have a locksmith fix the lock cylinder. Generally when this is done it avoids the programming and you can still use the old key. I don't have any CR-V lock videos. Thanks for the comment!

@ramonguzmans1934 6 лет назад

Great video! Have you done any ckp variation relearn with this scan tool? Looking into buying my first scan tool.

@BigDog50001 6 лет назад

Thank you. I have not had to do a CKP learn with this scan tool, many Hondas can be done without it. This Autel is a good scan tool and I would recommend it highly.

@jeoboden Год назад

do you still have to reprogram the keys if arent replacing the part just bringing it to a locksmith?

@ManBolo5432 3 года назад

Thank you Most clear I’ve found But during removal it seems a few steps are missing I followed all these up to shearoffbolts The unit is still well attached with several screws via white plastic molding

@BigDog50001 3 года назад

I don't know what vehicle you have but I did not edit out any steps in this video, what you see is what I did. Thanks for watching!

@GmGarlo 4 года назад

my steering locked when my ignition jammed up, if i take my ignition off like that, will i be able to unlock the steering? GREATSTUFFMAN!!!

@danithaman4610 6 лет назад

Can I have the link for that scan tool? And can you do a video on how to use it. Thanks

@BigDog50001 6 лет назад

Scan Tool: amzn.to/2zVDSSF

@tommylee4323 5 лет назад

How much would it cost to get it done if your not mechanically inclined

@michaeldallas8647 4 года назад

You can bypass having to program the new key by using your old kill switch. You have to take the chip out off your old key and tape it to the side of the new key. Then you can drive to the Honda shop (instead of getting towed) to get the key programed.

@BigDog50001 4 года назад

That can work if the old Immobilizer is reused.

@DoctorDee33 4 года назад

Clever

@dtnel Год назад

Just hire a locksmith to do it on site and save money vs taking it to the dealership. I replace the cylinder when they're locked up and program a new key or clone the key in. Cut a new key as well. $25 in parts and $325 dollar job billed.

@baolao6153 5 лет назад

Can you explain what you did with the scan tool when you said that we have to tell the ecm that there is a new immobilizer installed. Great video. Thank you

@BigDog50001 5 лет назад

The replacement parts contained a new Immobilizer unit and new Immobilizer key, both need to be programmed to PCM of vehicle (all three communicate together). The Immobilizer has to be programmed first ("tell the ECM there is a new Immobilizer") and then the same programming is done a second time for the key. So basically what I was doing at that time was programming the new Immobilizer that was part of the new steering lock assembly to the vehicle's PCM. Thanks for the comment!

@Shiekh420 Год назад

@@BigDog50001 SO IF I LEAVE THE OLD IMMOBILIZER AND ONLY CHANGE THE CYLINDER AND KEYS DO I HAVE TO USE THE PROGRAMMING TOOL OR WILL THE OLD IMMOBILIZER PROGRAM THE NEW KEY? ALSO WHAT IF I JUST CHANGED THE WHOLE STEERING COLUMN WITH WORKING KEY AND EVERYTHING WOULD I STILL HAVE TO DO ANY PROGRAMMING? CAN YOU SHOW A WAY TO CHANGE THE KEY WITHOUT PROGRAMMING?

@alandudley981 3 года назад

Very descriptive

@BigDog50001 3 года назад

Thanks!

@jameslund221 4 месяца назад

That right side bolt moved right away. Woohoo 🎉

@ciusesnal4335 4 года назад

What is the price for the oem parts? Why u didn’t program manually ?

@vincenttisdale1059 5 лет назад

The wiggling worked in a 2001 Civic DX. Who ever else has one shake the steering wheel vigorously but not violently

@BigDog50001 5 лет назад

Thanks for the input.

@jesusglez09 2 года назад

What if the steering is locked ? could i just unplug the battery for a couple mins to release it?

@kalvinkelley9879 3 года назад

great video! If I replace the assembly with a used part from a junkyard, will i still have to reprogram it?

@BigDog50001 3 года назад

Yes, thanks for the comment!

@billwilson3665 3 года назад

not if you use the key that goes with it. Then you'll have a key for the doors and trunk and one for the ignition.

@RMS1983 3 года назад

Will this work with a 2006 Accord EX?

@danielvenezia4112 3 года назад

So your saying if I use the old immobilizer I don’t have to program anything?

@richardmeier2558 2 года назад

Is there way I can start my civic without having to change the cylinder,my key won’t turn I’ve tried all your tricks but nothing worked ,like can just bang a screw driver in the ignition or something?