Тёмный

Honda mower crank shaft replacement 

The Small Engine Mechanic
Подписаться 667
Просмотров 3,8 тыс.
50% 1

Hey everyone! The Small Engine Mechanic at your service! Today, we're diving into a thrilling repair adventure: swapping out the crankshaft that took a hit when our mower blades clashed with an immovable obstacle. Let's roll up our sleeves and get this engine purring again!
If you know a veteran in crisis please dial 988 and press option 1 or Text 838255.
Disclaimer:
The information provided by The Small Engine Mechanic is intended for educational purposes only. The Small Engine Mechanic cannot guarantee against improper use or unauthorized modifications of this information, as factors beyond our control may affect outcomes. The Small Engine Mechanic assumes no liability for property damage or injury incurred as a result of the use of the information contained in this video. Users should exercise caution and adhere to safe practices when working with machinery and tools, as seen or implied in this video. Additionally, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, as outcomes may vary based on individual circumstances. Any injury, damage, or loss that may result from the improper use of tools, equipment, or the information provided is the sole responsibility of the user, and The Small Engine Mechanic shall not be held liable. Users are encouraged to use this information at their own risk and discretion.

Хобби

Опубликовано:

 

7 апр 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@stuartbowerman7132
@stuartbowerman7132 28 дней назад
Thank you sir. I have just replaced my bent crank with a lot of help from you.
@crisprtalk6963
@crisprtalk6963 2 месяца назад
THis dude has high end pullers! I need those! Excellent video!
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
Thank you so much for the comment!
@littpyro
@littpyro 2 месяца назад
Solid video brotha💪💯 very helpful my boys ran over something and dent the heck out of shaft so now I can fix it thanks to your help🫡.
@TheSmallEngineMechanic
@TheSmallEngineMechanic 2 месяца назад
Thank you for the comment! Glad I could be of assistance!
@gjohnston281
@gjohnston281 3 месяца назад
Nice job ,good info
@TheSmallEngineMechanic
@TheSmallEngineMechanic 3 месяца назад
Thank you for your feedback! It means a lot to me. My goal is to empower others to save money by demonstrating that they can handle these tasks themselves. It's incredibly rewarding to know that my efforts are making a positive difference.
@ronaldkuhn8857
@ronaldkuhn8857 8 дней назад
Can I get the part number on that crankshaft you replaced on that GCV 170
@Bradford5028
@Bradford5028 22 дня назад
Hi - how similar is this Crankshaft replacement to that of a similar model HRR216k10VKAA. Thx
@beloveddavid6139
@beloveddavid6139 4 дня назад
Sir will you fix my hrc216hxa commercial mower
@ceej9577
@ceej9577 Месяц назад
Hey I put multipurpose gasket seal on the sump cover and put it on, followed its instructions, then torqued the bolts. When I went to put the flywheel on, it would not turn the crankshaft. Do you know what the problem is and how I can fix this?
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
The first question I have to ask is if it is an actual Honda Crankshaft? Aftermarket crankshafts won't work on Hondas. If it is OEM, then I would check the torque on the connecting rod. If it is too tight it won't allow the engine to rotate. Also, check the torque on the sump cover, Too tight will prevent it from turning. Remove the coil to ensure it's not binding up on the flywheel. Hope the info helps.
@ceej9577
@ceej9577 Месяц назад
It is an actual Honda crankshaft, I torqued the sump cover bolts as told by you, first to 9 ft lbs then to 18 ft lbs and 2 of those bolts broke at 18 ft lbs.
@ceej9577
@ceej9577 Месяц назад
I removed the sump cover, removed all the gasket material to test if the flywheel would spin. And the flywheel spun without gasket material and hand tightened. How much honabond do I need to put it on to keep it from binding?
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
@@ceej9577 It doesn't take much Hondabond, any excess would get pushed out during the torque procedure. I think you might want to look over the main journals. They might have been damaged during the blade strike.
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
@@ceej9577 The bolts would break if either the threads are damaged, The torque wrench hasn't been calibrated, or the bolts have been exposed to too much heat. It's not unheard of for a bolt to break during torquing.
@tythrutime
@tythrutime 2 месяца назад
Just what I needed to see at 24:55 what did you use to get the blade mount and rear drive pulley off?? I tried a tradition gear puller but can’t get ahold of anything. thanks so much brother!
@tythrutime
@tythrutime 2 месяца назад
i’m stupid I skipped right over it!!! special puller!!!! thank you!!!!! off to autozone i go! 😂🙏🏼
@TheSmallEngineMechanic
@TheSmallEngineMechanic 2 месяца назад
@@tythrutime The three-armed puller made it so much easier for the pulley, and the Flat bar puller made it easy for the adapter. Cheers!
@jacquesbillingsley8733
@jacquesbillingsley8733 Месяц назад
Nice video, were can I get this part and whats the part number? I have the same mower, my mom run over a tree stump and bent the the crank shaft😓 .please help
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
I'm always available to help out when I can. Could you put the mower Model Number here and I can look up the exact crankshaft part number for you. The model number will be behind the engine on a placard. The mowers look the same externally but, could have minor differences. The last thing you would want to do is buy the wrong crank.
@jacquesbillingsley8733
@jacquesbillingsley8733 Месяц назад
HRN216VkAA ?. I think
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
@@jacquesbillingsley8733 Roger that. I'll check when I go back to the shop on Monday.
@jacquesbillingsley8733
@jacquesbillingsley8733 Месяц назад
@@TheSmallEngineMechanic thanks
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
The crankshaft part number is 13311-Z9L-000 if the sump seal is still good you can reuse it, if not you will need part number 91202-Z9V-003. The part numbers are based off of the model number you provided. There should be a set of numbers that look like GCBT-1234566 that will give the exact engine to look up. Hope this info helps. Cheers! The SEM.
@rewasbhujel4473
@rewasbhujel4473 Месяц назад
Where do you get the crankshaft
@TheSmallEngineMechanic
@TheSmallEngineMechanic Месяц назад
It was ordered from "Tidewater Power Equipment". It's an authorized Honda Parts seller.
@walleyeye
@walleyeye 3 месяца назад
Not a very good video. I dis this job last spring on my honda and you didnt cover lining up the timing marks on the crank gear and the cam gear or how to properly apply the honda bond or crankcase gasket maker.
@TheSmallEngineMechanic
@TheSmallEngineMechanic 3 месяца назад
I'm glad you dis this job on your Honda. There seemed to be an opportunity to delve deeper into the process of applying Honda Bond to an engine and align two timing marks to a single one. If you're open to it, I'd be happy to collaborate on a video together to showcase the proper techniques. Cheers!
@crisprtalk6963
@crisprtalk6963 2 месяца назад
12:10 you clearly did not watch the video
Далее
Bent Crankshaft
23:30
Просмотров 7 тыс.
Honda GCV160 Teardown and Rebuild Small Engine Repair
1:02:14
400,000 Honda Units RECALLED!! Let's Fix It
1:08:19
Просмотров 175 тыс.
Reemplazo del cigüeñal del cortacésped Honda
30:11
Просмотров 1,6 тыс.
Bent Crankshaft How To Replace Simple fix Low Cost
35:24
Honda Mower Surges
10:33
Просмотров 93 тыс.
I Straighten My Shaft - Part 2
11:33
Просмотров 2,2 тыс.
I lost my kitten on the street😭 #cat #cats
0:32
Просмотров 164 млн
Я решила стать тёпленькой 🔥
0:34
РЫБАЛКА ДОМА
0:17
Просмотров 9 млн