Honda Odyssey Swaybar Endlink Replacement DIY

Подписаться 52 тыс.

Просмотров 16 тыс.

50% 1

Here is how to replace the swaybar endlinks on a honda odyssey. This is the same process on most of the odysseys.
1999-2004 Swaybar Endlink: amzn.to/2rDMw1I
2005-2017 Swaybar Endlink: amzn.to/2KYQKZz
Impact wrench: amzn.to/2GbiF5d
Flexible ratchet: amzn.to/2rFM96B
Deep socket set: amzn.to/2IcPV1y
Antiseize Compound: amzn.to/2IgKIpP
#ad

Авто/Мото

Опубликовано:

24 май 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@mwolf0259 4 года назад

Just did this on my 2013 Odyssey. Three of the four nuts were seized and I ended up cutting them off with a recip saw. 100% recommend buying replacement flange nuts before you start. 2 of the 4 got stripped. They are M12 1.25.

@zmanwithfire 4 года назад

I am getting ready to do mine... thanks for keeping short and to the point!

@zmanwithfire 4 года назад

It takes the other guys over 8 minutes to show you how to do the same thing.

@doyleredwine1683 5 лет назад

thanks for the great vids

@slatsgrobneck7515 2 года назад

Really appreciate that you also tell us the torque spec! Thanks

@lasoniawilson5638 4 года назад

Thank you.

@gabrielmerza6904 6 лет назад

Good job!

@MrRangerZr1 6 лет назад

Thanks.

@joecox9958 5 лет назад

Best! Shortest!

@MrRangerZr1 6 лет назад

*Parts and tools listed below:* 1999-2004 Swaybar Endlink: amzn.to/2rDMw1I 2005-2017 Swaybar Endlink: amzn.to/2KYQKZz Impact wrench: amzn.to/2GbiF5d Flexible ratchet: amzn.to/2rFM96B Deep socket set: amzn.to/2IcPV1y Antiseize Compound: amzn.to/2IgKIpP #ad

@lasoniawilson5638 4 года назад

Which side is this you are replacing and can you use this sway bar for either side left or right? Does it matter?

@MrRangerZr1 4 года назад

Lasonia Wilson both sides same

@michaelwilson2891 7 месяцев назад

Are the flange nuts the same for both top and bottom? I assume they are but just want to be sure.

@MrRangerZr1 7 месяцев назад

yes

@michaelwilson2891 7 месяцев назад

Thank you! Crazy that you have to buy the OEM hardware (nuts) separately! lol@@MrRangerZr1

@MrRangerZr1 7 месяцев назад

@@michaelwilson2891 usually you can reuse the nuts but if they are rounded off or crusty best to replace

@babarrashid3634 5 лет назад

I wish mine came off this easy. I had to blow torch the booger. Was a PIN.

@MrRangerZr1 5 лет назад

Yep sometimes you need to chop or blow torch it off, especially in the rust belt states.

@elgatogordo9523 4 года назад

Yep, going through that now 😖 I even sprayed penetrant the night before. I have two options, 1st to hold the backside with a vise grip. 2nd to just just cut if off. I don't have a blow torch.

@onlywenilaugh6589 3 года назад

@@elgatogordo9523 I ruined 3 vice grips trying to hold mine. Gonna have to cut with my cutoff wheel now. What a pain. They really need a flat edge on backside to hold it as the allen hole is a joke.

@lambertj.2892 Год назад

@@onlywenilaugh6589 Honda doesn't want it to be easy for you. They want you to come to them for the job.

@aaroncue7802 2 года назад

How do you know when it is bad??? Was the one your removed bad??? The van i have has 115k miles i think the are original, with the 5 blue dots in the back of the ball joints

@MrRangerZr1 2 года назад

It'll be torn and loose

@3CHD Месяц назад

Does it make a noise when driving?

@PatrickFDolan 20 дней назад

@@3CHDyes. Tapping noise over small bumps. Tapping noise from side to side.

@michaelwilson2891 6 месяцев назад

Doing my sway bar links right now and uh... I'm gonna assume you don't live in the rust belt. My impact wrench alone couldn't get them off. Using a vice and the impact wrench, the right came off. The left isn't moving. I may have to cut it off. Oh well. We live in both the rust belt AND on a gravel road. Double trouble! :)

@michaelwilson2891 6 месяцев назад

I ended up cutting the left one off! Oh well. Got my new ones installed.

@MrRangerZr1 6 месяцев назад

even not in the rust belt sometimes you have to chop them, it's annoying...

@jefffu1926 3 года назад

I found it’s really hard to torque the lower end of swaybar link, the torque wranch can not reach there. How did you torque the lower end of link?

@MrRangerZr1 3 года назад

Just do the best you can, tighten it up with the ratchet.

@lambertj.2892 Год назад

You do this with both wheels off the ground at the same time, right?

@MrRangerZr1 Год назад

Yes

@ItsMe-by4fs 5 лет назад

not really that easy of a plug and play, trying to get them out and back in, sometimes requiring two jacks to get the holes to line back up, otherwise, good video

@MrRangerZr1 5 лет назад

Were you changing the endlinks with both front wheels off the ground? If you have one wheel off the ground and the other on the ground, you'll never get it to line up.