HONDA PILOT GLOVE BOX WON’T OPEN - How to Open your Stuck Glove Box and Replace the Latch. Easy Job!

Подписаться 19 тыс.

Просмотров 123 тыс.

50% 1

Glove Box Stuck Closed? In this video I’ll show you how to open your Honda Pilot glovebox and replace the broken latch. Replacing the glove compartment latch on your 2009 to 2015 Honda Pilot is easy. Do it yourself and save money! Also CHECK OUT • HONDA PILOT TAIL LIGHT...
I hope this video helped you. Please don't forget to LIKE and SUBSCRIBE. Thanks for Watching!
Get FREE unlimited Shipping, Movies and more - amzn.to/3jbgbs...
Click on the Links below to purchase:
*Honda Pilot Glove Box Latch Lock Assembly Gray 2009 to 2015 - amzn.to/3m0YJYZ
*Honda Pilot Glove Box Latch Lock Assembly Beige 2009 to 2015 - amzn.to/3rp3UDm
*Honda Pilot Glove Box Latch Lock Assembly Black 2009 to 2015 - amzn.to/3tTq4PM
*Honda Pilot Glove Box Latch Lock Assembly Blue 2009 to 2015 - amzn.to/3flpy8Z
*Craftsman Screwdriver Set - amzn.to/3sy52G...
*Craftsman Pick Set - amzn.to/3w605GK
*Craftsman Mechanics Tool Set - amzn.to/3coWM4v
*Gojo Hand Cleaner - amzn.to/2HgIuX...
*Shop Towels - amzn.to/2ZQvnT...
*Fixin To T-shirt - amzn.to/33OgqT...
*Car Guy T-shirt - amzn.to/37JpfR...
*Honda T-Shirt - amzn.to/3s4Imw...
*Honda Long Sleeve T-Shirt - amzn.to/37t7Xr...
*Honda Hat - amzn.to/3atL6O...
Fixin It is an Amazon Associate and earns from Qualifying Purchases.
email: fixinit7@gmail.com
Instagram: /
TikTok: vm.tiktok.com/...
#fixinit #honda #glovebox #gloveboxlatch #repair #hondapilot
Disclaimer:
Due to factors beyond the control of Fixin It, I cannot guarantee against improper use or unauthorized modifications of this information. Fixin It assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Fixin It recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Fixin It, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Fixin It.

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@fixinit 3 года назад

Check Out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aCIJat7VcuE.html

@schooper. Месяц назад

Sending hate to whoever the supplier is for this mechanism, it’s so poorly designed and easy to break

@KubrickHoe 5 месяцев назад

Oh my gosh it worked!!!! Thank you SO much. I screamed with excitement when it worked. The second method worked for me

@brycedrennan7722 2 года назад

1) Note that lock must be unlocked to use the pick method. When unlocked, your pick catches a lever. You use your pick to move the lever down. Then the lever moves the pin fixed to the latch tab, to release the latch tab. (For reference, see 1:37 where author moves the lever [lock is in the unlocked position,] and where the tip of the lever [screen left] just touches the latch pin.) The lock feature works by shifting the whole lever to the side, and shifting the tip of the lever to be out of contact with the pin for the latch tab. Therefore, if the lock is enabled, then you can use your pick to move the lever down all day, but it's not in contact with the latch-tab pin, so that won't do anything. If locked, then make sure you use the vehicle ignition key to move the glove-box lock to the unlocked position before using the pick method. 2) I recommend only the pick method because: (0:21) "It's gonna snap open" means that when you use the pry method, you will break ("snap") the glue at the attachment points. (These are not tabs to be re-used, rather fixed glue points that you will permanently break.) If you break too many glue points, then if you want everything to work right afterward, you'll have to pull those pieces apart and re-glue all the glue points. 3) Don't pry the two door pieces as much as you see in the video. If you do unlatch by going in from the top, you need only a small opening to separate the inner and outer pieces of the glove-box door, just enough to fit a thin screwdriver through, and to see where the latch tab is, maybe less than 5mm or 0.25". If you limit the size of the split, then you can get away with breaking only a few glue points near the top center, none near the corners, and the glove box will function normally. Too big a split means more glue points broken, and more of a risk that you'll need to launch a second project to re-glue the two door pieces. 4) I used specialized plastic pry tools to protect the door piece from any risk of permanent nicks. No metal tools for prying. That's for both the pick method, and the pry method.

@ayubkhan5647 Год назад

Great, it worked for me

@songkim1437 11 месяцев назад

After watching your video, i tried to fix mine. It won't open... after **** 3 hours, i found out glove box was locked... =-= 😑😮‍💨. Thx for your video, now it works like a brand new. Thank you.

@YagoandLana 5 месяцев назад

Awesome, what are your thoughts on a 2022 Pathfinder, our handle completely broke off...

@yalehaley4553 2 года назад

Thank you for doing this video ! I got my 2012 Honda Pilot glovebox to open . Didn’t know what to do for wasn’t your video . Saved me some cash !

@traviscade3186 2 года назад

Who knew that this was such a big issue with the pilots. Thanks for the part numbers too!

@fixinit 2 года назад

Thanks for watching! 😎

@davidkratzer3463 2 месяца назад

Thank you. Just went too fast on showing part number.

@121232gail 2 года назад

THANK YOU...I used the second method to open my glove box on a 2004 Pilot. The first method was too scary. I was afraid I would break something and on the 2004 that cover is a big piece.

@jglycon473 3 месяца назад

Nice clear video. Fixed my 2015 Pilot glove box latch easily after watching. Thanks!

@tipcourville7462 11 месяцев назад

good info saved me some time thanks

@ryanself2170 Год назад

Thank you my guy! U are the man for this video!

@AllenRReid 3 месяца назад

Great video. Wasn't as simple as you made it look (for me), but I did it! I had the replacement part already, and now I'm good to go. My cabin filter was a mess, so I'm glad I finally got around to fixing it. Thank you!

@alishal6236 3 года назад

Do you know where to get the part currently?

@fixinit 3 года назад

I see Amazon is currently out of stock. Bummer. Try doing a google search for it or try the Honda dealer.

@KarmaDogSpeak 2 месяца назад

My exact model lol - appreciate you posting this.

@OAKOD510 2 года назад

THANK YOU SO MUCHHHHH!!!!

@zacharyhailey2120 Год назад

666th like? Uhhh!!! But fantastic video! Thank you so much for posting this.

@danglejenkins9907 7 месяцев назад

This really helped me - thank you for showing me what and how to do it and for linking the replacement parts. Could not have been easier. Nice work boss.