Great demonstration on the float height adjustment and importance of orientation while taking the measurement. It's such a tedious and awkward job getting them all correct. Float valves--especially aftermarket replacements--are my biggest source of frustration in carburetors. Thanks for the vid.
Always a pleasure to watch a video made with care. Your information was concisely delivered and the video camera work was clear and well lit. Well done!
A brilliant man 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Brilliant video thank u👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Good day, I am in the process of rebuilding a set of these, my set was not as clean as yours when I started and it was mostly apart. I notice your main jet holder has 4 holes on either side, well upon removing the fuel varnish from mine I noticed 2 look identical to yours and 2 have 4 extra holes, do you happen to know if this is a front vs back positioning or an inner vs outer, i would assume the two higher flowing jets get the holders with more holes but I'm new to v quad carb setups and not seasoned on fine tuning jets at all. Do you know the answer or have an opinion, unfortunately they looked the same when removed and I do not know from which carb they originally were positioned, thanks for the video regardless of response or lack there of and greetings from New Jersey, USA
I am learning all the tips and tricks thank you 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍