Honda VSA & ABS Warning Reset - Simple DIY

Подписаться 120 тыс.

Просмотров 1,3 млн

50% 1

If I helped ya out? or just enjoy the content & you would like to buy me a drink ko-fi.com/gerardburke
In this video I show the procedure I used to reset the vehicle stability assist VSA warning which also includes reset of the amber / yellow triangle with an exclamation mark and ABS light in a Honda.
Vehicle used in this video was a Honda accord but it works on many models of Hondas. I will list as many as I know of below that this works on.
Tool options that I recommend and use - www.amazon.co.uk/shop/gerardb...
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
List of Vehicles it works on
Honda Accord 2002-2008
Honda Civic 8th & 9th generation 2006 onwards models
Honda Ridgeline 2006 onwards
Honda Odyssey 2003 - 2008
Honda Pilot
Honda CRV 2006 onwards
Acura MDX
Acura RDX
Acura TSX 2004 onwards
Acura TL 2004 onwards
Acura RL
#VSA #ABS #HondaReset
Known years it works on
2000 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016

Авто/Мото

Опубликовано:

1 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 603

@paultreviska9417 2 года назад

Hi Gerard, Thank you for this, my message appeared after a Diag Tool check too. I wrote this out and have added it to your comments in case anyone want to copy paste your instructions and go out to the car with it. Part 1 Resetting the ABS Icon Connect pin 9 to pin 4 1. Hold Break down Turn Ignition ON ABS light will illuminate Wait for ABS light to extinguish 2. Release brake ABS light will illuminate Press Brake Again Light will extinguish again 3. Release Brake pedal once again This time ABS light will blink twice and extinguish for good - confirming the reset Part 2 Resetting the VSA Connect pin 9 to an Earth 1. Turn Ignition ON 2. Wait for the ABS light extinguish 3. Select VSA switch to OFF 4. Wait for the ABS light to illuminate 5. Select VSA switch back to ON The ABS light should now be set and all the warnings should be cleared. Check by turning Ignition OFF and back ON, all Warnings should extinguish

@timmacnulty8947 2 года назад

Wow....works like magic on Acura MDX 2006. Big thanks Gerard. You are God sent. These icons ⚠️, VSA and ABS appeared after my MDX was scanned two years ago. Every effort to clear them by car mechanic was abortive and the sight of them anytime I enter into my car was like a pin in the ass that needed to go away. Eventually, I stumbled on this Gerard's video this midnight 00:21AM and having read all the good comments here, I could not wait till morning but rose to try this trick which worked out for me. I have an appointment tomorrow with my mechanic on this issue. Too bad, appointment is cancelled. Just on time, Gerard happened to me. Big thanks Gerard

@sujithkondabrolu1684 3 месяца назад

hey , I tried doing this on my 06 Acura mdx , after shorting pin 4 and 9 all I see is my check engine light and other lights blinking , the abs doesn't tho , any suggestions ?

@user-ic2ge3dp7k 4 месяца назад

This fixed my 2009 Honda Accord LX-P with these 4 lights on: VSA, "Triangle with exclamation point", "BRAKE", and ABS light. Thank you!

@Radiateprosperity 11 месяцев назад

Straightforward and to the point unlike other channels where it takes the host 5 minutes talking about nothing just to keep the viewer on to help his channel's engagement. 💪

@hamidsikada469 9 месяцев назад

Just lovely . My car has been sitting in the shop for 10 days. They couldn’t figure it out. finally, this guy come up with a genius idea, and I did it myself for less than 5 minutes booooommmmm .

@BuddyApperson-oo4wx 5 месяцев назад

ME TOO

@jerryblack6948 24 дня назад

Me. 3 I have been waiting to get mine smog but couldn't get the lights out. Work like a charm thanks Mr Burke

@gempilot 3 года назад

Thanks for sharing this DYI tip on how to reset the ABS & VSA warning lights. I tried this reset process and all our brake-related lights turned off, saving me a bunch of $$$!! We had a leaking windshield that caused the VSA light, ABS and BRAKE lights to stay on after a really bad rain storm (1/2" water on the driver side floor mat). After having the windshield replaced, we took the 08' Accord to the dealership to have it diagnosed; they said the VSA modulator needed to be replaced, for $2045!! My net search on this issue found this video and 2 minutes later, all lights were reset... thanks for posting, Gerard !!!

@TheCarventer 2 года назад

This literally just happened to me too. I just bought the vsa modulator. Guess I’m trying this out first

@tomgreene7942 Год назад

@@TheCarventer Well, did the VSA ABS Jumper of Pins 4&9 work, or did you have to replace the VSA Modulator?

@gamer653gamer7 4 месяца назад

Did you had ABS, Brakes in red, VSA and power steering lights showing up in the dashboard?

@nobodyimportant3188 Год назад

I changed my VVT solenoid and my 07 Honda Odyssey kept going into limp mode. I came across this video and it worked. My van is running better than ever. Thx for the help.

@georgegleek Год назад

Genius. All I did was scan this damm 2007 accord and it set the VSA off. Only this procedure worked, it's perfect, just do it in a speedy timely movement, not too long between the steps. I wrote the instructions on paper. Thank you so much, this was a real real problem today.

@Rexmorgan687 3 года назад

Thanks for making this video! I used your instructions to clear the triangle/VSA light that came up on my 2007 Honda Pilot after I used a Launch CRP scan tool to clear codes.

@uptownsfinest1598 3 года назад

is it still on ? I just bought a pilot with it on and I here it's common so it didn't like scare or bother me so I went on with the purchase

@Pollito_C 2 года назад

If this worked on a Honda Pilot it should work on a 2008 ridgeline right ?

@nathanielmayo4950 2 года назад

Thanks! I popped a check engine light due to a dead thermostat, mechanic used his snap-on megabucks tool to clear the codes after replacing the parts, and it triggered the Triangle and VSA light. I used Pin's 4 and 9, since 4 is the chassis ground, and your trick worked like a charm! Much appreciated.

@XXGunzNClipzXx Год назад

Thank you Soo much, I did a head gasket on my sister's car but let it sit for 3 months and after all repairs done this light was ON, finally got some free time followed your steps and gone :D

@jaysonpineda9918 2 года назад

Thank you very much for this video it works on Honda City 2015 resetting ABS light on. Saves me money for going to autoshop with scanner. More power to your channels

@vincesanjuan 2 года назад

Bro ginawa mo pa yung sa VSA or abs procedure lang?

@aodwyer 9 месяцев назад

THANK YOU!! This was a huge help. Was so annoying. Watched so many vids and read so many damn articles. Many came close but I am glad I couldn't do all of them bc I prob would have fried my car LOL. For anyone out there, this works on a 2005 Acura RL.

@matthewgrant2220 2 года назад

Wow so this video was the best explanation and fix to getting triangle light off and vsa not to come on. My friend has an 07 honda pilot. And we have a scanner which takes off vsa in abs function but that triangle is always on from start to turning off vehicle. Vsa would come on within a block or 2 until you cleared the code but we have been trying for a Lil bit now to figure it out. We'll after I reset abs triangle turned off stayed off. And no vsa light as well. Thank you so much for your video and help. Because thatvcrappy lights would cut power down like the calipers were sticking. You made our day today. Again your video did the fix. Thank you again for your help and for posting a real cure to that headache. 🙏😀

@joseport9855 2 года назад

Thanks a lot , by the way this also works for models up to 16! 🤗 Mine is a 2015 Honda crv and works as he described! Thanks again!

@daviddonaldson5336 3 года назад

Thank you sooo much. I had my wife's 2006 Honda CR-V in for a stuck Intake Manifold Modulator fix and when I got the car back the VSA indicator was on and would not go off. I searched the web for solutions, and got a bunch of different answers. I filtered out the ones that sounded too hillbilly and tried yours. I skipped the ABS section since only her VSA was on. Bah-Dah-Boom. I got her car fixed! (With your help.) Thanks.

@JenniferFlores-tt4hu 3 года назад

My Honda CR-V is doing this as well. Want to try it but I am concern I’ll make it worst.

@daviddonaldson5336 3 года назад

@@JenniferFlores-tt4hu Jennifer - I thought the EXACT same thing as you, that I would short something out - but it turns out this worked perfectly. I would only suggest you use a small (as in "thin") paper clip, and a clip-lead if you can scrounge one up. It'll make it easier to connect the ground while you're sitting in the driver's seat. The hard thing for me was finding some metal part under the dash to find a ground. Some people use the hinge on the door jam. If you can't find any wire, cut the ends off an old extension cord and use one side of that. You can split the two wires by splitting it down the middle with a pair of scissors, and "zip" them apart into two separate wires. Good Luck.

@ajmoorman 3 года назад

Honda Pilot 2012 EX-L worked perfectly first time! Thanks for the video

@konstantindufnik696 3 года назад

Thank you so much, worked on my 2006 Acura TSX, did the full reset with the abs, cleared all the lights

@GerardBurkeBurkesGarage 3 года назад

👍💪

@guiratorart 2 года назад

Gerard, thank you very much, this kind of maintenance it's was gonna took me a bunch of money since here in Brazil 8th gen Accord's are rare and qualified maintainers are even rarer, even honda dealers would probably suffer to solve this (Sadly, but truly mean it). One detail... At least on mine 8th gen, when pinned 4 and 9, and turned the ignition key on, it showed a code UXXXX on blackout screen, but it was fast so I couldn't record or remember it, and for my luck I didn't need to follow all the procedures described for the brake pedal and VSA button it resetted immediately. Anyway I'm just really glad you solved my problem that easy, no more christmas tree out season, LOL. Again, thanks man... BR greetings

@jaankraav1313 2 года назад

@Gerard Burke This worked for 2014 Honda CR-V. Thank You! I have to say that OBD pin 4 is already ground, so no need to use extra jumper.

@lao4me Год назад

Just wanted to say many thanks for sharing this knowledge helped me clear the Triangle light. Same issue as you described no issues identified but scan tool created ghost fake code. Took a few goes to find a good ground which I found at the door hinge nut thread. Thanks again champ.

@Cangrijero Год назад

Gerard, thank you so much! It is a very helpful and well explained video. Take care!

@dwaka08 2 года назад

Thanks brother huge help . For the warning light I used pins 9 and 4 and did ur steps work like a charm

@marianovargasatencio8852 15 дней назад

I dont use to write comments in RU-vid but this one really deserves a good one! Thanks for your help! Really usefull tutorial! Congrats from Spain!

@RobertWLennie 3 года назад

You rock!!! This freaking light has been driving me crazy!! Fixed. Thank you so much! Stealership wanted $200! 2006 Pilot (took three attempts... probably my fault).

@riderr2035 3 года назад

Stealers diler jejejeej bro make my day

@aarons7995 3 года назад

Dude you ROCK, thank you very much for making this video.

@tkrap 2 года назад

Works like charm, just press on the VSA button twice within 3 seconds, if you wait longer will not work (at least for me it didnt), Thank you very much.

@Bartmanzo 10 месяцев назад

You’re a legend mate! You dug me out of trouble with this one. Thanks a lot for your help 😅

@user-gi2gj6jb5t 5 месяцев назад

Just reset the codes on my 2012 Pilot. Worked like a charm. Thanks for the tutorial!!!!

@szamani02 2 года назад

Worked on my 2005 Honda Pilot. Got the VSA light after a full scan done by a shop. Thank you so much!

@GerardBurkeBurkesGarage 2 года назад

Glad it helped, thanks for commenting and sharing 😊

@timmilton6568 Год назад

Had my 2006 CRV scanned at a local shop and left with the VSA indicator on. I watched the video but the ABS didn't behave as described. I tried it three times and moved on to the second step and it cleared it right away! Thank you!

@sujithkondabrolu1684 3 месяца назад

the first step only works if you have a code 84-1 in your abs module , if the abs doesn't blink it means there aint any codes in your abs system

@angelsantana2184 2 месяца назад

@@sujithkondabrolu1684so my 2006 Honda Crv also has this issue when using a snap on scan tool. The warning light is the only lit light. It’s code 84-1 so the first step should help with this issue?

@mariodelvalle9572 2 года назад

I watched a few videos about this and this one was the one that helped. Thank you Sir.

@jaweedahmed5466 2 года назад

Good job sir

@t-fuelernienotoriousmisfit7449 2 года назад

It worked you're a genius. I'm buying you a drink. THANK YOU !!! 🙋‍♂️💯🚀 2007 Honda Pilot 3.5L. Took me many tries Cause you have to follow every single step exactly and I was missing a few small steps. Had to see your video several times and write down the instructions. But it worked finally

@GerardBurkeBurkesGarage 2 года назад

🙌🙌🍻🍻

@paxyoung3827 2 года назад

Thank you sooooooo much, after spent tons of money they still on until I followed your step to kill them! You are more helpful than my local car service. Really appreciate.

@chaplainaguilar 3 года назад

Thanks brother. It totally worked for my 2007 Honda pilot. After the mechanic worked on my airbag, triangle light and VSA would not come off. I watched your video, and it worked. Thanks again.

@juliewang9639 2 года назад

I tried this procedure on my 2007 Honda Pilot and the triangle is still on. After following the VSA procedure triangle light did not blink. Also the VAS off button still not working. Care to share more of your experience? Chaplain.

@CarlitoAugust 2 года назад

@@juliewang9639 same thing here

@mjmalaske 2 года назад

@@juliewang9639 try not doing the grounding. Just jump 4 & 9.

@demecojohnson5522 2 года назад

Awesome!! I did this tonight and all lights went out. Thankyou so much guy.

@riderr2035 2 года назад

What's did you did I still not understand

@rickmucci4785 3 года назад

This would need more than a simple thank you! Red bottle of wine it is! Thank you soooooooo much and well explained! ⭐⭐⭐⭐⭐

@GerardBurkeBurkesGarage 3 года назад

While I don't drink red wine I do love a monster :) I have a page if you would like to grab one ko-fi.com/gerardburke Either way thanks very much for the kind words, I appreciate it.

@DustinTempleton 10 месяцев назад

Dude. Thank you so much. Had the same problem using Blue Driver. The Honda manual only mentioned doing the TCS reset and it wasn’t helping. Doing ABS before I did the one with the traction control button. Finally Code and light free thanks to this video.

@CarFan312 2 года назад

Genius!!!!!!! Thank you for serving the community

@rodentolentino1256 2 года назад

Thank you!! Worked great on 2008 Honda Pilot,👍👍

@lisapatrick7939 2 года назад

I had to change an ABS sensor first, but same problem. I can't believe it worked. Thanks man.

@GerardBurkeBurkesGarage 2 года назад

Nice one Lisa 🌟👌

@martinzeidel8371 Год назад

Thanks from America Gerard! I had my doubts about this on my 2012 Acura TSX. From the other comments I thought I've had fried something When I saw the DTC codes Flash up onto my screen. Nope it worked perfect had to do it multiple times but exactly how you said it my friend. At the same time luckily I went outside because my brake lights were on strange I've done this to another Honda before where the brake lights switch (crap plastic) crunchrd -replaced with a nut and screw and 2 perfection fit.

@rayownsson 3 года назад

Very helpful video! The triangle for the vsa off showed up during removal of some old faulty codes and wouldn't go away. After some driving the vsa light turned on aswell. after I tried this method and it worked like a charm, huge thanks for the vid! (Honda accord 2006)

@GerardBurkeBurkesGarage 3 года назад

Thanks Micke 🙏🙏

@pnmbmw 2 года назад

@Micke Andersson. I seem to have the same symptoms as you. Did you have to do both steps or just the last step. Thanks

@rayownsson 2 года назад

@@pnmbmw Had to do both steps, just as in the video. Good luck

@allanfranklin9615 3 месяца назад

, what caused the VSA warning light to come on?

@ModestMaker Год назад

Worked for me, although the timing on the VSA button push needs to be quick (don't hold it). Took me four tries-- here's the procedure I used thanks to your video: STEP 1 Pin 4 and 9 Hold brake pedal down Turn ignition on ABS light comes on ABS light turns off Remove foot off brake pedal ABS light turns on Hold brake pedal down ABS light turns off Remove foot off brake pedal ABS light should blink twice STEP 2 Ground pin 9 Switch ignition on ABS light goes off Press VSA off button quickly ABS light comes back on Press VSA off button quickly All warning lights should be off

@jask5081 8 месяцев назад

Per ModestMaker instruction regarding having to quickly press the ‘VSAOFF’ button in the reset procedure is GOLDEN! Much appreciated! 2007 Honda Pilot AWD here.

@bsbaretta4780 3 года назад

Thanks dude! Worked for my 2006 Pilot.

@GerardBurkeBurkesGarage 3 года назад

No problem 👍

@yakineaccordyakine8328 2 года назад

Thanks a lot for this video it helped me so much after a long suffer with the dealer spending lot of money for nothing thanks again

@danielbarta6707 4 года назад

Hi, thank you for the video. It helped me to fix VSA triangle on my Honda Accord CM2 (2004). In my case the second part of the reset needed to have 9-4 pins shortened too, not 9-GND as in your video. Cheers!

@GerardBurkeBurkesGarage 4 года назад

Thanks Daniel 🙏🙏

@willsr.9154 4 года назад

I'm trying this today.. Just so I understand 'when you say you had to have 9&4 shortened what do you mean?

@danielbarta6707 4 года назад

@@willsr.9154 Follow the video. First part requires you to shorten odb connector pins with wire. Second part of the video says to shorten pin to ground. What worked in my case means to do the second part of procedure in video with shortened pins as per first part of the video - not to ground.

@themcilroyfamilyYT 2 года назад

@@danielbarta6707 so no grounding at all just leave it as it is for the last part ? Because the grounding part lost me

@danielbarta6707 2 года назад

@@themcilroyfamilyYT yes, it worked that way in my car.

@mileslevi2562 4 года назад

This has been bothering me for 2 years! Thanks

@schifoso Год назад

I tried a XTool D7 OBD2 scanner and it turned on a couple dashboard lights. Kinda funny because none of the gauge actuation functions are supported (2007 Honda Pilot). Couldn't get the VSA light to go out. Tried what you showed a couple of times and it didn't work. Ended up using the scanner to clear codes in pretty much every module it could, then tried your jumpered method and it worked. Very nice. Thank you. 🙂

@richarddarlison8892 2 года назад

Worked first time on my 2007 accord...thank you !

@SurvivorMichael 6 месяцев назад

So great, it works like a treat! thank you Gerard!

@jlramirezaguilar7707 4 года назад

Thank you for the tip 👌

@dmnguyen5 3 года назад

Appreciate it! It's been on for a year and half. Finally got it off

@duckquansmith8620 3 года назад

How you got it ? I got a honda accord 2012 brought it mash fix the mash, it needed a transmission solenoid brought it and already put it on the transmission but the d light still blinking and it have the vsa abs and engine lights on how to take ? it off

@GerardBurkeBurkesGarage 3 года назад

Thanks Duc

@duckquansmith8620 3 года назад

@@GerardBurkeBurkesGarage ???

@patthisplaya4u 3 года назад

@@duckquansmith8620 check all your computers and make sure they are dry. Has the car been in a flood or broken windows?

@MOTIVATIONBYDAR 3 года назад

You are the man!!!! Alll my lights went out after this exact procedure!

@alexandrosoto4367 3 года назад

So did mine. I jumped the wrong pins. Blew fuse 23 under hood.

@Shedhunter2 9 месяцев назад

Thank you so much! This worked on an 06 Honda pilot. (I left the jumper in from 9 to 4 as a ground)

@Al3xralst0n 2 года назад

I genuinely cannot believe that worked! Excellent video.

@GerardBurkeBurkesGarage 2 года назад

🙏🙏💪💪

@user-il1ct3nr4b Год назад

This fixed my issue for a 2005 Acura TSX. Thank you so much!

@stefanmarinkovic4222 4 месяца назад

Honda accord 2006 hybrid, didn't make it in first try, it worked after 4th or 5th try, it got on after shop used snap on, and they later told me abs module is bad, used on ebay was 400 or 600$ , i got across this video and i can't thank you enough.

@r0llingw00ds7 3 года назад

This method worked on my 2005 Acura TSX. Thank you

@GerardBurkeBurkesGarage 3 года назад

Thanks for sharing

@Ponpursat 4 года назад

great video. worked on my 2003 MDX. thanks you!

@GerardBurkeBurkesGarage 4 года назад

Great stuff

@25romie 3 месяца назад

First time i ever try something as instructed and it works great thanks ❤

@DamianStephenRULES 3 года назад

Legend!! Thank you so much!! 🙂

@supervitz7178 3 года назад

This is brilliant. Couldn't find this info anywhere else. The car went to a garage for an unrelated fault, they had a snap-on diag tool and it triggered the Exclamation mark, the VSA light would come on when reaching 30mph. I went through this process and it's cured! The garage couldn't work it out. I used the door bolt for GND. Thanks.

@angelsantana2184 6 месяцев назад

I have the same issue, I had a check engine light on for the knock sensor which I ended up replacing with the oem one cause aftermarket still showed the check engine. I went to reset the check engine after replacing it and had my exclamation mark on ever since. They used a snap-on diagnostic tool as well. You think this video will help?

@supervitz7178 6 месяцев назад

@@angelsantana2184 yes sounds exactly same issue with snap on tools

@angelsantana2184 6 месяцев назад

@@supervitz7178 I’ll give it a shot, thanks.

@tiggermix 11 месяцев назад

THANK YOU SO MUCH FOR THE VIDEO. I replaced the engine on my Daughters 2005 honda accord and these lights came on, resetted them with my snanner and they would come back on adter a few yards. Did this trick, and Voala.. lights are off. Even the Cruise Control started working. Thank you very, very much.❤❤

@SlimGoodie70ate 2 года назад

This worked for me on my 04 Accord. Thanks.

@freightshaka4193 3 года назад

06 acura tl here. Noticed brake lights would not go off. Brake stopper broke into pieces. Replaced that and the brake light switch. Solved the brake light problem. But then VSA and the /!\ lights came on. Vsa button inoperable. Felt like while trying to drive I had the brake pedal and accelerator pedal pressed at the same time. Scanned codes and 68 and 84 came up. Readjusted the brake light switch. I had it in too far. Scanned again and got the 2 same codes. But the car drives fine. VSA light disappeared but the /!\ light remained. Followed the steps provided by this video and all lights on the dashboard are off. Car drives fine. Afraid to plug up the scanner and run the codes again. Don't want to trigger the dash lights. Thank you! Hope this didn't deactivate the ABS and VSA systems but don't want to press the VSA button again either. Again thank you for this video I was ready to throw a lit match to this car.

@stevenplymale2948 2 года назад

Thanks so much…..worked perfectly but as you say be sure to make a good ground. I had to try different contacts to get the ground

@radiationagar7191 2 года назад

I love you man! Abs paper clip did both for my 2012 odyssey thank you 🙏

@GerardBurkeBurkesGarage 2 года назад

Nice one 👌🤗

@yosieandthepussiecat 3 года назад

Thank you!!!! I have been in the Honda sites and everyone had the First part but no one had the second part where we ground the 9 pin. Mine started post COVID lockdown. My battery went dead from not driving. My roommate is a mechanic and has worked for Honda in the past and has never seen this happen. We jumped the battery and then all the lights on the dash turned on. They pulled out their cheap scanner and didn’t get enough detail. Then pulled out his SnapOn scanner and the details all pointed at the the battery going flat. Put the battery on a charger for the night. Cleared all the codes and the TCS light didn’t turn off. No matter what we did. We tried the ABS reset multiple times. On level ground with and without the door open. No changes the light would keep turn back in after driving a mile. Today we tried what you posted and it is now working correctly!! Thank you again!!

@canonponds9887 3 года назад

worked on a 2007 honda pilot 😎 the only thing I did different is kept the paper clip on pin 9 and 4 for the second set of steps! Thank-you!

@tjellis1479 3 года назад

yep same electrical point 👍

@johnndong5678 2 года назад

Worked straight away on 2008 Pilot, thank you so much!!!!!!!!!!!!!!

@GerardBurkeBurkesGarage 2 года назад

Thank you John

@derrickbarker8354 3 года назад

Wow, I just used it on my 2008 Honda Accord, it work like dream save me alot money really appreciate

@joseluisdiaztoledo84 3 года назад

Hwo you do it i got the same probleman anda same car ass well

@christophermandley2483 3 года назад

Big thanks ...coffee for you my friend ....the fix on my accord worked ....was going to scrap it ....phew

@dragan8318 Год назад

Good bless you man , worked like a charm ,I have 3 scan tools I couldn't erase then Thanks mate

@GerardBurkeBurkesGarage Год назад

🙏🙏

@beaverbeater3205 3 месяца назад

Good video. That was helpful to me, lights go away. Thank you

@jrcopley5456 Год назад

Worked a treat. Many thanks 👍

@bradperez3649 2 года назад

Works like a dream! 2011 honda insight!

@youtubejunky7481 11 месяцев назад

Thank you, thank you, thank you. I have read forum after forum, and they were all BS. They all left out the jumping the pins. Just push the break pedal and just push the button. None of that works, and i was skeptical of that too. I have done enough work to know there should be a little something else. One of your commenters said that pin 4 is ground. They were right and you dont have to take the jumper out. Just leave it where it is and do the other step without the break.

@dylang7468 3 месяца назад

Thanks! What model Honda was yours on?

@longhuynh5249 2 года назад

Hey, i went through the same thing, after full scanning using Autel IM508, the 2 lights came up and your 2x procedures removed them. Thank-you, Thank-you, Thank-you

@joe102674 Год назад

2007 Honda Pilot Fixed!! very simple instructions although I did no use a ground strap (was not needed) just left the small paperclip in 4-9 and done both steps...

@mrraanjoung2103 2 года назад

Thanks! Worked like a charm

@mrme9517 7 месяцев назад

THIS WORKED FLAWLESSLY I HAVE A FOXWELL AND NEEDS UPDATING SO I CAN'T DO IT THE EASY WAY FOUND THIS DID IT FIXED IT AND A FEW ORHERS IN THE COMMENT SECTION IS CORRECT JUST LEAVE PIN 4 AND 9 JUMPED THEN U DO THE PROCEDURE FOR BOTH THE ABS & VSA RESET SINCE PIN 4 IS ALREADY A GROUND NICE WORK TO ALL 😎😎🍻🍻

@JamesDang2 2 месяца назад

Bro thank you! Just did this on my brothers 2005 Acura RL and can confirm it works! Cheers!

@alttr2992 2 года назад

honda accord 2003 your meathod works perfect thnx!!

@ianrickell6014 2 года назад

Thanks for this, just done on my 07 FN2 Type R worked spot on, removed both.

@russellmay9841 2 года назад

I can’t get it to work on same car.

@ianrickell6014 2 года назад

@@russellmay9841 Just remember plug is 1-9 on top,bottom is reverse 1 is below 9.If you have this then follow as in video,my ABS did flash 2 times but came back on though.Tuned ignition off but left keys in so was beeping, I then removed no 4 attached earth to clip & my door nut & followed as video. It did take me 3 times before worked though. Fingers X it works mate.

@TranNguyen-hu3yc 3 года назад

It is really helpful. thanks so much

@brianblomquist6113 3 года назад

Worked like a charm

@saintdave1877 Год назад

I owe you a drink if you ever find yourself in Glasgow , whole set of lights on dash after a scan. A honda civic diesel 2013 , worked like a dream , all lights gone , only had to do pins 4&9 , thanks so much. ETA : my OBD was upside down comparing to your video , so googled the pin locations and had to start opposite.

@MeNotHearYou 3 года назад

Thanks worked for my 2003 honda accord uk spec 😁

@GerardBurkeBurkesGarage 3 года назад

Great, thanks for the comment

@dougtang 2 года назад

That works for me, thanks for the video

@christianromero89 2 года назад

You sir are amazing thank you it worked for me!!

@BlueSkyDogs 4 месяца назад

Thank you thank you thank you. Mot today and this was the last thing in my list before it goes in. Thank you so much. B

@davidhori4899 3 года назад

THANK YOU! Totally worked!

@GerardBurkeBurkesGarage 3 года назад

That's great David 👍

@rdwalter 2 года назад

Success! 2005 Honda Accord Hybrid. The light came on after I had a shop replace the AC compressor and they said it might be due to a faulty ABS module. (I didn't think so) So thankful for this "hack". How did you even figure it out? Definitely buying you a few drinks! Cheers! 🍻

@GerardBurkeBurkesGarage 2 года назад

Thank you very much. It's massively appreciated 🤗🙏🙏

@johnshotton6014 3 года назад

Thanks for the tip, worked on a 2003 accord in Canada, my cpr129x must have caused it.

@GerardBurkeBurkesGarage 3 года назад

Cheers John, thanks for the comment. Off topic question, how do you like your Launch? I am getting a Creader 909 in a month or so and will be doing some reviews on it. interested how you rate the 129x

@johnshotton6014 3 года назад

Gerard Burke I have had it since about Christmas, it’s been pretty useful, I was able to reset the brake light after a brake job on a Hyundai, the cheap Bluetooth to phone devices couldn’t. I was able to read the data on the abs pressure switch that’s how I knew your reset would work and that it wasn’t a bad abs pressure switch