Love your channel as I too am a tinkerer of old locos. It is so satisfying to bring an old loco back to life so, like all the other commenters, Kevin, I hope you help us to revive our old locos by putting your clever engine mounts on the market. Phil from Australia
I got one of these not so long ago and had a similar knocking noise from the valve gear. The front pin was just catching the inside of the piston motion as they passed each other. I tried splaying out the motion a bit to no avail. The problem in the end was the drive gear itself, there was a small moulding pip on one of the teeth that was hitting the worm and causing the axle to lurch to the side causing the collision. After removing the pip all runs smoothly. I have also removed the traction magnets as a matter of course as they serve no purpose on modern track and just create extra drag.
Hi Bill My Class 4P surges too and already has the same motor as you have just installed. I'll try adjusting the position of the worm to see if that helps. Noone seems to have done a service on this motor type so maybe in the future you could look at doing a service to show everyone the critical points of the motor to oil etc. Thanks a lot for your help. Mon from Brisbane
Excellent. I'd like to do the same to my old Hornby 2MT. With the high prices of new models (Hornby's new 2MT has a rrp of £185.00) I think there is going to be a bright future for conversion kits that give old locomotives new leases of life.
I've converted a few Lime diesels using c d drive motors at £1.00 each ..they run just as well if not better than the new Hornby class 66 I've just purchased !!!!!
An excellent upgrade to a beautiful loco. I have come to really appreciate the LMS livery. Everyone will want these brackets now, I know I would like a couple. Kevin, if you are out there, I hope you put them on the market. 😊
@@Trains4Ages Hi, thanks for the update, much appreciated. I have searched and searched but can't find them. Do you have an ebay store? What do I look for.
Thanks very much for documenting this conversion Bill. My own 2300 is growing increasingly restless whilst relegated to the fiddle yard and I wouldn't hesitate to purchase a motor mount, or better still motor, mount and worm conversion kit, from Kevin.
The version of this loco from the 1990,s had this type of motor with a metal bracket. Looks like a very worthwhile mod to an old loco....... A new lease of life!
I was sent them personally so they aren't readily available unless Kevin decides to do something about that and I can't divulge any contact details I'm afraid.
Hi everyone thanks for the feedback and to Bill for the video of the upgrade. I'm hoping to get some mounts up on Ebay soon, the motors are available in Peter's Spares and newmodellershop in various guises, the worm will be custom to your specific model loco so I can't supply those, Cheers Kevin.
Well done, Bill. Great difference in the sound. 3D printed parts are going to help keep older locos in running order. Kevin's product gets a 'thumbs-up' from me. Are these readily available? Cheers, Jim L
Hi everyone thanks for the feedback and to Bill for the video of the upgrade. I'm hoping to get some mounts up on Ebay soon, the motors are available in Peter's Spares and newmodellershop in various guises, the worm will be custom to your specific model loco so I can't supply those, Cheers Kevin.
Hi Bill, I like to convert some X04 motors to Mabuchi type 7, but there are so many worms available that for me Dutchmen it's impossible to see. All my stock have 40 Tooth brass or Nylon gears and I need the X.... type worm with the 1.5mm axel dia. Do you know what the Hornby X type worm I need.
How can one go about getting those 3D printed parts, and what worm drive did you use for the type 7 motor? Please. I have 4 old Tri-ang Hornby locos that I would like to convert to DCC and the old X03/04 motors are a little power hungry for DCC chips
I was sent them personally so they aren't readily available unless Kevin decides to do something about that. Maybe one day I'll get into 3D printing. It would be a very useful thing to be able to do and is getting more affordable.
@@oobill I understand that, but why are you reluctant to ask the question from “Kevin”. Pass the request to Kevin and let him decide if he wants to make these mounts available. I don’t think that is too much to ask, please
Hi everyone thanks for the feedback and to Bill for the video of the upgrade. I'm hoping to get some mounts up on Ebay soon, the motors are available in Peter's Spares and newmodellershop in various guises, the worm will be custom to your specific model loco so I can't supply those, Cheers Kevin.
I was sent them personally so they aren't readily available unless Kevin decides to do something about that. Maybe one day I'll get into 3D printing. It would be a very useful thing to be able to do and is getting more affordable.
Hi everyone thanks for the feedback and to Bill for the video of the upgrade. I'm hoping to get some mounts up on Ebay soon, the motors are available in Peter's Spares and newmodellershop in various guises, the worm will be custom to your specific model loco so I can't supply those, Cheers Kevin.
@@gordonbruce2416 Hi Gordon, I've managed to put some up on Ebay, search for XO4/O3 replacement motor adapter frame, will look to get some more sorted asap. Cheers
Hi everyone thanks for the feedback and to Bill for the video of the upgrade. I'm hoping to get some mounts up on Ebay soon, the motors are available in Peter's Spares and newmodellershop in various guises, the worm will be custom to your specific model loco so I can't supply those, Cheers Kevin.
Could do with some of those for my aging xo4 motored locos, so kevin , if you read this , get them on Ebay , you'll sell quite a few reading the comments on here.
Hi Bill ,, What the heck is that thingy called with the clamps and the magnifying glass are on actually called. Id like to buy one but its a bit hard to look up something to buy when ya dont know what its called. Hope you can help with putting a name to cool looking gizmo. Also you picked it up in the last few minutes the ticking i can still hear it but not as bad. Anyhoo cheers from john in Australia.