Now Enabling Full Model Railway Control For All DCC Decoders From Within The HM|DCC App. All Plugged In & Working Together. Two Gamechangers! Both For Under £50 From Hornby.
These Devices Simply Plug Into Any Existing Xpressnet Controllers Like The Hornby Elite Or Selects. Easily Configured With Passcode Protection To Take Even Greater Control Of Your DCC Layout With The HM|DCC App & The HM7000 Digital Control System.
1. I'll Explain All The Benefits Quickly From The Start
2. Show You How To Hook It All Up & What You Need In Advance. All Hands On.
3. A Running Session With Four Trains | Two Gadgets | An Elite & Even A Connected Select | All Connected & Running
Now You Can Take HM|DCC App Control Of HM7000 Bluetooth Decoders | Non Bluetooth DCC Decoders | Non Hornby DCC Decoder Fitted Bachmann | All Connected & Running On One Layout Using Whichever Gadget/Controller You Want Shown.
Control How You Want | When You Want | Available Now!
PS - You May Want To Grab, Hang On To Or Dust Down Your Old Elite Or Select. If You Can, I'd Get Latest Software Version 1.6 Selects, As Updates On Selects Are Factory Installed Only By Hornby. Try Get Software V1.6 If You're Now Considering, A Cheap At Present Second Hand One, Just To Play Really Safe But, Hornby Do Still Offer Cheap Update Service If There Was An Issue I Think But, Do Check)
You're Probably Taking Advantage Of All The Great Benefits That Have Already Been Unleashed Within The HM7000 Control System, Now Including 77 Locomotive Sound Files... etc, etc, etc...
But Now On Top...
1. Just One Legacy Dongle Enables Access To App Control Your Older DCC Decoder Fitted Locomotives On DCC Addressed Layouts Too.
2. Legacy Dongles Now Offer Multiple Gadget Control.
3. Up To Six Independent Gadgets Can Now Be Connected To One Controller.
4. Up To Six Gadgets Can Now Control & Connect To Any DCC Decoder Addressed Locomotives On Your Layout At Once.
5. Expand Xpressnet Sockets Available By Adding Club Adapters If Required
6. No More Need To Toggle Between Bluetooth App & DCC Control.
7. With The Xpressnet Legacy Dongle Connected The HM|DCC App Updates Your Hands On Controller In Real Time.
PLEASE NOTE!
At present you can't control the older type DCC Addressed Accessory Decoders through the Legacy Dongle on the HM|DCC App but, hopefully soon. There is a cheeky workaround by using the HM6010 Bluetooth Accessory Decoder on your layout & assigning these outputs to operate any wired in Points, two Aspect Signals, Lights, etc.
1. Non Affiliated Link - Hornby Bluetooth Accessory Decoder - uk.hornby.com/products/hm6010...
2. Non Affiliated Link - Walkabout Cables needed to connect a Hornby Select to a Hornby Elite Controller in differing lengths -
www.ebay.co.uk/itm/1955235486...
You Can't Update CV Settings On The Layout Of Non Bluetooth DCC Decoders With The HM|DCC App But, Hornby Are Planning Big Things I Hear So, Stay Tuned!
You Can Also Support This Independent, Unsponsored, Uninfluenced & Unaffiliated (Non Team Based) Channel With The Link Below | By Sharing & Subscribing
buymeacoffee Donation Link - www.buymeacoffee.com/modeloco
You can now support the channel by purchasing the Remastered Modeloco intro track - Link - andymacc.bandcamp.com/track/c...
00:00 What Dongles & Adapters Enable
02:02 Connecting It All Up & Options
10:57 Adding A Second Gadget, etc
20:01 Layout Run Examples
9 июл 2024