How a washing machine door lock works, how to test interlocks

Подписаться 134 тыс.

Просмотров 707 тыс.

0% 0

Tired of a washing machine door stuck shut? This video offers a deep dive into the inner workings of door locks and how to diagnose and fix common issues.
*In this video, you'll learn:
How washing machine door locks work: Explore the mechanics and electrical components behind the lock, including the bi-metal strip, PTC heater, and locking pin.
Testing your door lock: Discover safe and effective methods to test the lock's functionality using a multimeter and understanding wiring diagrams.
Troubleshooting common problems: Identify potential causes of a malfunctioning lock, such as a faulty bi-metal strip or distorted plastic parts.
Repair solutions: Gain insights into fixing the lock yourself, including replacing damaged components.
Bonus:
Shop for replacement parts: Easily find the correct door lock for your washing machine model through the provided links.
Access additional resources: Explore comprehensive tutorials on door lock replacement and tips for dealing with a stuck door.
Don't let a faulty door lock disrupt your laundry routine! Watch this video today and gain the knowledge and confidence to diagnose and fix the problem yourself.
🛒 * Washing machine door locks
www.how-to-repair.com/help/se...
🎥**Tutorial:* www.how-to-repair.com/help/how...
Washing machine door locks really only get 3 major faults
The points between live and common fail in some way.
The NTC heater or bi-metal strip fail.
The plastic gets to hot and distorts inside the lock causing it to jam.
Washing machines must have some way in which you can lock the door closing mechanism when the machine is started up and then unlock them with a certain delay (normally two minutes) after the current has switched off via the program or on/off switch, in order to ensure that the door cannot be opened while some of the components are still rotating initially (in particular the motor and the drum of the spin-dryer).
When you shut the door, the latch on the door pushes inside the door lock onto a sliding bar which moves over and activates an electrical part inside which locks the door shut. At the same time, power is passed through the interlock on to the rest of the machine. The actual latching shut of the door is a simple spring-loaded mechanism where the latch just slips into the door catch and the door stays closed. Locking the door is a separate process.
Please remember to subscribe to our channel
ru-vid.com?...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-pau...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RU-vid. / apart4u
Facebook. / how.to.repair.appliances

Хобби

Опубликовано:

18 фев 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 163

@nancolpitts4884 6 лет назад

Thankyou soo much for this video! I thought I’d have to remove the whole top & front panels, or book a service call! This took just minutes to fix & saved me $$! Happy dance!!

@echolalia1965 4 года назад

Very good video - I didn't realise the interlock was so complex - thought it was a simple switch. Thanks

@michaelhall7921 8 лет назад

I am a commercial heating engineer and I must say how precise this video is and it make a very pleasant change to see a professional instruct clearly what to do..... Many thanks

@How-to-repair 8 лет назад

+Michael Hall it's a lot of work but its nice when people say its a good job especially when its the trade. I am glad I could help you Michael with this problem. Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@BJcanal270 2 месяца назад

😂😅😂

@elyankhayat2900 2 года назад

You deserve a million likes Thank you so much for good details

@jean-pierreduponsel2696 3 года назад

Very well explained ! Never thought that they would use a heater mechanism to allow / disallow the latch to open. All along the years, could not understand why the small delay at the end of the cycle. Thank you.

@tonyharvey4569 6 лет назад

Thanks very much for the useful video including seeing INSIDE the interlock device.

@johnm7723 2 года назад

Thank you just what I needed, I was 90% there and you gave me the confidence 10%. Well explained and good video.

@How-to-repair 2 года назад

Glad it helped! We now have Live Q@A's weekly on our live show, see our home page ru-vid.com for the next date

@butchisaacsen4017 6 лет назад

Very good video when he mentioned and ohm reading on the heaters it is open or closed you dont need a resistance measurement in numbers its open or closed.

@MrAkos127 6 лет назад

This video showed and proved to me that is time for a new machine. Paul you are great explaining how this switches works. It is terrible, they should not make it bi-metal enforced, this is really old design. It is so much easier to do by computer program, Water is out of the machine to the door level? yes - no if yes, open door immidiatelly if no restart a drain cycle, tell the customer water in machine to high, draining. then open door. Paul you are did a fantastic job!

@zsebacsi2 7 месяцев назад

Very big thank you! with the help of this I managed to clean my interlock and it's working again:)

@Golfer-rn7lh Год назад

really great explanation of how the switch works, thanks

@chr11sf 9 лет назад

Excellent and well shown demo, Paul. Thanks.

@taab7 4 года назад

At 5 min 26 sec, finally a clue as to which wires to bridge to bypass a malfunctioning door-lock. Remove the door-lock after disconnecting the 3 wires leading to the lock. Bridge common to live. (Keep neutral isolated with insulating tape). Door-lock for my 21 year old machine no longer available so bypass was essential & machine is now working great.

@dwalker399 4 года назад

I did the same thing. Parts left off cost you nothing!

@alexthomas1498 5 месяцев назад

I got 2 browns and a red. For 210 volts only across 2 browns. Any ideas which ones I link

@daniepark19 7 лет назад

Thank you this helped me fix my latch. Mine just seized but when I took it apart it became free, thank you for all you help again

@How-to-repair 7 лет назад

Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@lileithdockery5751 8 лет назад

i've been looking for this demo a while now. greal help .thanks.

@How-to-repair 8 лет назад

+lileith dockery I am glad I could help you with this problem. Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@inekic 5 лет назад

Awsome demonstration and explanation!

@mjoebar 7 лет назад

Thank you for the information. I did use this knowledge to fix my Brandt front load washer

@How-to-repair 7 лет назад

@azi88ful 8 лет назад

very good video. good clear instructions. thanks mate.

@chipj1295 7 лет назад

thanks man, you saved me a $200 service call.

@chrismurray2109 7 лет назад

Great video- I'm guessing various models of interlocks either switch the 0v or some switch the live 240v down the common connection. Is this correct? Many thx

@judith8161 7 лет назад

Thanks for this crash course in washing machine anatomy! It's a real pain if you can't solve a problem just because you don't know how the parts you are struggling with actually look like. It's always the same: as long as things work, I don't even ask myself how they do so. It's only when something stops doing what it's supposed to that people like me start asking questions xD!

@bkugla 6 лет назад

Thank you for this great video.

@How-to-repair 6 лет назад

@maxxsmaxx1901 6 лет назад

very useful demo ..and also good video

@jason.aldridge5004 2 года назад

great info i to thought it would be a simple micro switch to lock unlock the door but n as i got inside witch then found myself watching your video to see the working as i thought id be able to just bypass it for now as the mrs is on my case now as like most stuff around the house its left till last minute now we have a pile of washing the mrs will have me doing laudry runs if not sorted soon. but thanks again for the info on the door workings even though i learnt something today and it wasnt as basic as i first thought.

@tomh.3513 7 лет назад

Thank you for the information. I did use this knowledge to fix my LG front load washer with the DE error. No one else shows how the latch works. You did!!!!! After some thinking i decide not to buy new part, instead i take it apart to bypass by fooling it. Wedging a piece of plastic below the contact strip so it makes contact with the upper one did the trick. Very obviously the heating bimetallic strip was bad on mine thus causing the DE error. Furthermore I broke the plastic pin that prevents the door from opening once it is running. It works. No part replacement requires. Door can be opened during use but I do not care as long as it works. Besides who would open the door while it is running. Thanks again for showing how it works when no one else does. Knowing how it works is the key to figure out how to fix it or by pass it! I did and it worked. The metallic heating strip is common to fail as it heats up and cools down throughout its life and once that thing is toasted there will be no more contact goes in and out thus the DE error. Well if that were the case then i will fool it by providing the missing door lock signal mysel by bypassing it. Many appliance forum repair people said it can't be done. Well they either want to sell new part or don't know themselves how to bypass. I beg to differ!!!!!! Hope this helps someone. Attention! this mod. requires disassemble the latch switch assembly which is very easy and understand what i talk about here to do it. Good luck!

@How-to-repair 7 лет назад

@leobyrne9444 7 лет назад

tom ho '

@How-to-repair 7 лет назад

Iam Glad we could help you But for people with not much knoledge i do not recomend this! Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@SilverKuusik 7 лет назад

thx for the video, very nice explanation, would be nice to have such a test box also, did you make it yourself :D ? one day my mom's LG machine just jumped the fuses in the house and after that starting the program after a moment would give the dE (door) error I basically made an extra feather connecting live to common and pushing down live closer to common. worked just fine, the machine is now showing the door locked indication all the time the door still does lock in my case, just it takes 10 seconds after the program started now. so in my case the heating is still working it showed 800 ohm also between live and negative, it's just not strong enough anymore as it used to be

@TheTaylorghost 6 лет назад

i dont think much of your logic... you need to think again. Never , ever, by pass a safety feature!!!!!!!!!!......... Anyone could open the door while the machine is in full spin,, children love to experiment, and will open the door, they could get a limb ripped off in the death roll of a crocodile.that is your machine. i am sure the judge will think you were very clever before he sends you to jail. please buy a new part before you kill some one.

@THEJET52 3 года назад

Great video for the repairmen

@RDayal-qr6ip 6 лет назад

Very well explained.My problem is that I tried to open the door after 15 minutes .It did open but it cracked .So now even if the door lock is in order and shifts but the door is not shutting. The crack I tried to stick as it was a hairline fracture but am now not able to shutbthe door. Its a WW 1995 model. Excellent machine .I wonder if the door can be replaced in India.

@chocoroll8D 5 лет назад

Excellent video. Thanks

@irishguy200007 4 года назад

Is it the full 220 volts accross the coil and does the neutral switch on and off to prevent overheating of the coil or is there a resistance on the circuit.

@Bozojimmy 4 года назад

thanks for the video...is it possible to circumvent this lock and make the connection always closed as opposed to whent he door is closed. I understand the safety concers...my problem is that the interlock for the model of my washing machine is not avl.

@milkmilk286 8 лет назад

Excelente explicación! thank.

@sarkaragha 5 месяцев назад

professional and efficent.⚙

@GuitarLessonCharts 6 лет назад

How do you simulate activating it? just press it over once or do you have to hold it in place?

@johnmellor6065 6 лет назад

was hoping you could give me a heads up on the test rig you used in video ,if i could ask for circuit hope you wouldnt mind thanks

@sepanshamsadin7543 9 месяцев назад

i fixed my washer by self thanks bro ❤

@mbcline 8 лет назад

This is a very long detailed video, but you didn't really explain what you were doing with the multimeter. What are you measuring? What units? What readings are you expecting?

@shoaibrafiq42 2 года назад

He's checking resistance and checking when two terminals short, hence that's how this lock works, its a button basically.

@michaelparanormal 2 года назад

I have a Next dinamic Hoover washer/dryer ,when i turn dial to program sometimes i get the padlock on display even though i have not pressed the start button and after a few seconds i get E16 error , i looked up the error for this and found out its the heater eliment could be faulty i changed the heater eliment but still get the same error code , somtimes the machine works ok and other times when i have not used it for a few days the error comes back on, i checked all possible reasons with pump blockages or water and drain pipes but found they are all ok, i think it could be the lock that you showed or something else!

@robertodaltro1727 7 лет назад

Hi Paul..Please could you help me with my wash..a Samsung B1045av..where the selector Knob freeze in just one position (in my case (cotton program) and due this the machine do not start the programs..Other buttons are working fine..When i play start..only a low noise I can hear..maybe the interloock..only after appears DE code..for door problems...But I think the interock is not the main problem of the circuit board..I think.. Thanks Roberto Daltro

@arnelangeles4718 8 лет назад

But you haven't mentioned what's the range for Ohm resistance for good or bad door locker switch? say for 3pin terminals.

@therealandrewcano 6 лет назад

Great video!

@SiriCharan09 6 лет назад

Hi Paul.. Great video as usual... What if the connector which connects the door latch is burnt. How to change the connector??

@ex-tractorfan 6 лет назад

Hi Ive got a whirlpool washing machine which shows the door open LED. I bought a new door interlock and replaced it, and it is still the same. Whirlpool have quoted £129 call out, £100 an hour labour and extra for parts needed, plus VAT, thats more than the machine is worth. Any ideas where I should look next? As they wont tell me, but they sold me the interlock. Thanks Nick

@leonyoung8761 Месяц назад

Great video. Thanks. Can you tell how to identify the wire? which one is live, neutral and common as they are same color and no any sign.

@Pittur001 5 лет назад

Thanks for help...but can you tell me how to bypass this switch? tkx

@PlusUnique 8 лет назад

excelent! thanks for de very nice and usefull work

@How-to-repair 8 лет назад

+Paulo PlusUnique I am glad I could help you with this problem. Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@nandnvideo 6 лет назад

if its 3 4 5 the diagram which one should be connected plz help my washing machine is ariston washing machine ar6f105

@x5ite 8 лет назад

could you offer me a quick help? I have a blown out transistor on the circuit board. z0607, someone linked it to the door lock mechanism, but mine functions just right, just that program on the machine stops immediately after 2-3 seconds. my question is, for testing purposes, if I disconnect the door lock, would it ignore it and start the program like it normally would?

@glodivina 7 лет назад

I brought a new washer door lock assembly and latch because the washer would fill up but the door would not lock causing the washer not to work. After replacing the switch on the door and the latch the door still not wanting to lock, any ideas? I've already tested the switch and it's fine. Help please I have a Frigidaire Affinity front loader washer.

@gyangobind3989 Год назад

Sir if any problem testing time if live and neutral is chnge.,

@kellybergeron69 7 лет назад

I have a Kenmore Washing machine 110.20222510, it is less that two years old. 3 months ago it held my Fiance's hostage until we took it apart. We bought a new lock assembly, replaced it and did one load of laundry. On load number 2 it locked the clothes in it again! So Kenmore machine that is less than 24 months old has had it's lock assembly replaced twice. What do I do?

@PradeepKumar-ev4kn 2 года назад

is there a way to know perfectly live neutral and common, when we use multimeter which is live which is neutral. and also what is out put of door lock is it neutral or live to pcb board.

@schachat01 3 года назад

I have a LG front loader washing machine, model number WD-8005. It has a DE error. I have checked the door switch and that tests out fine. I would appreciate any advice on what could be causing this problem. There is no 220V AC that across the door lock contacts. The main circuit board number is 6870EC9168A. If you have a circuit diagram that will be great. Thank you.

@Omcsesz 7 лет назад

Thank you, sir, for this video! Can you show us what's in the tester?

@How-to-repair 7 лет назад

only switches and some smart wiring Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@yhonastv7477 5 лет назад

Can i ask i ha e washing machine showing the interlock hardware means the door lock is failure are bad ?

@williamavila8316 8 лет назад

amigo te felicito por este video esta muy bien explicado y de antemano te felicito , soy de Colombia y me guiado por las imágenes del vídeo por lo que no se ingles y ha sido de mucha ayuda me gustaría saber si en tu canal tienes los vídeos en español para poder entender las fallas y explicaciones que das de esta lavadora . agradezco tu pronta respuesta y gracias

@How-to-repair 8 лет назад

+William Avila ninguno en español lo siento

@AbbyStar07 8 лет назад

Excelente explicación!

@ChurchOfTheHolyMho 5 лет назад

The problem ridden Whirlpool Duet HE3/HE3t series is different. One connector contains 2 wires that determine if the door is closed (switch - normally open circuit / closed when button is depressed). Another connector contains 2 wires that determines if the lock is locked or not (switch - normally open circuit / closed when lock mechanism is down). The final connector contains three wires. It connects to for lack of correct word - a center tapped solenoid. Apply voltage to middle and "outside" - and door unlocks. Apply voltage to middle and "inside" and door locks. Unfortunately, I have a short in one side of the coil. Hopefully I can find the part without purchasing the entire $80-$100 assembly.

@svkurup7677 3 года назад

My LG front door washing machine door is locking properly, but the the door lock sign in the board doesn't light and hence the machine cannot be switched on. Appreciate your guidance to solve this problem.

@stevengilber1153 5 лет назад

Great info!!!

@nitelite78 Год назад

So does this mean that turning the washing power of at the wall will always release the thermal lock eventually after a couple of minutes?

@davelaabs4713 9 месяцев назад

have maytag neptune , can't locate the relase cable how can i use a jump wire to release the door if possible my model number mah4000aww. please help

@janjuabros4722 6 лет назад

Thanks so much helpful vedio for me

@logunscott 5 лет назад

thank you so much

@antonio28360 3 года назад

exelente brother no tienes un seguro de tapa de una lavadora frigidire para saber como se chekea y si el swicher del sentrifugado se puede puentear espero tus comentarios gracias

@How-to-repair 3 года назад

Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@mohamedsayeed3165 2 года назад

awesome explanation

@How-to-repair 2 года назад

please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@francismercieca3272 6 лет назад

It is very interesting and helpful, Thanks.

@williamavila8316 8 лет назад

gracias

@How-to-repair 2 года назад

We now have Live Q@A's weekly on our live Show , see our home page ru-vid.com for the next date

@Ali.ibnmohammad.cherigui 5 лет назад

thank you

@robertzerafa4806 6 месяцев назад

Can you please put a link to your shop in the comments, as every time I try to use the shop link, it says error

@user-jp4lr6lv1l 5 месяцев назад

Hi, very good education.my LG direct drive door lock washing machine has no. 1_3_2 pls which them is connected to nutral (-) point? Thanks.

@How-to-repair 4 месяца назад

A while ago on RU-vid, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have. If it helps, you don’t forget to share it with your friends who may also own an LG. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w5dZ4Pj8Jdo.html

@user-jp4lr6lv1l 4 месяца назад

@@How-to-repair thanks a lot

@stephenhutton7514 3 года назад

mine from a 50kg whirlpool 3 pin, reads 953 ohms. Does that means it bad?

@mertsamet2953 4 года назад

hello . i know these terms phase. neutral. ground .. but . what is the meaning of ''common'' . c ? . in one of the youtube video . repair man says that you can do direct connect between the phase and common wire . ..is this true ?

@Mike.Nov51 7 лет назад

Is the PTC heater 240v or something less?

@butchisaacsen4017 6 лет назад

It has to be 120 volt, the same as what the washer is feed with. They might be rated to 240 volt but Ive never heard of one .

@homopolemicus3449 4 года назад

Hi. I have an indesit washing machine. the door lock light is flashing and the door won’t lock and water is not running. I changed the interlock with a genuine part. But still getting the same problem. What else could be wrong?

@buckmajor 7 лет назад

Hey mate, I have the Simpson Esprit 650. The mistake I made was washing a heavy blanket? Now there is left over water, it is not spinning properly, and won't drain properly only a little bit. Any suggestions?

@reyzabala9853 2 года назад

try to check the water level sensor. .

@GetGood5 8 лет назад

wow very nice.

@irishguy200007 4 года назад

So the neutral is switched on and off and the live is constantly on??

@davidguy7742 Год назад

What is the tester you are using and where can I get one? Great video.

@How-to-repair Год назад

made it my self will make video on it soon

@benanderson8630 7 лет назад

I am a missionary in Tanzania and have use of a whirlpool washing machine. The lid lock seems to have a short in it some how as the led light flashes and the washer cycles in and out of proper functioning as contact is or is not present in the latch mechanism.Replacement parts here are very difficult to acquire and or procure so can you please explain how I can temporarily or possibly semi permanently bypass this switch?

@TheTaylorghost 6 лет назад

NEVER BYPASS A SAFETY FEATURE......... MANUFACTURES LIKE SAVING MONEY SO IF IT WAS NOT NEEDED THEY WOULD NOT FIT IT.......... IT WILL RIP SOME ONES ARM OFF

@meheboobhasan5321 4 года назад

Thank you for this video.please make a video of door lock of Samsung washing machine.

@How-to-repair 4 года назад

@mrcmrf Год назад

Long shot ask... My door latch on my bosch is in the closed / locked position but the door isn't closed. I have the door latch out of the machine but can't see a way to release it to open again. It's a dks67617.. Don't suppose you'd know how to activate the switch? Thanks!

@How-to-repair Год назад

I have just had a look to see if I could find you the workshop manual, but I've had no joy. I'm sorry I have done a video on how to release stuck door locks, but I'm not sure this will assist you. Have a great Christmas and a happy New Year. I hope you can get your machine working again. glad we could help you Marc Murphy this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@johann390 Год назад

Hello Sir, do you know which pin has which function on this relais? Link in comment above Thank You

@rabbbie99 4 года назад

Hi there I have a machine that locks but the locked indicator on the front panel does not illuminate. The machine fills with water but the motor to turn the drum never runs. Does the circuit need a signal from the door lock before it allows the motor to run? It is a curry’s essential C912WM18

@How-to-repair 4 года назад

if it fills then its ok. check motor brushes Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rFyGAHVFUW8.html&t facebook.com/how.to.repair.appliances/ Stay safe

@LordKingPotato 6 лет назад

Hi there, I recently changed my door lock as the old one was clicking. At first it worked then suddenly after 20-30 mins the display panel said the door was open but it's locked, do you have any ideas. Trying to get this working 😖

@How-to-repair 6 лет назад

Check connections and try again but make sure terminal on lock good Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@stanraman6552 6 лет назад

if the door interlock is defective will it prevent power being supplied to the start switch on a bosco classixx washing machine ?

@stanraman6552 6 лет назад

bosch. ..splchk error

@How-to-repair 6 лет назад

Yes it could be the problem. Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@Omcsesz 7 лет назад

Dear Sir! Is there a way to bypass the interlock?

@How-to-repair 7 лет назад

yes but its not safe Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@viswanathaniyer2372 6 лет назад

A good viedeo

@ukvideosjeffery9016 5 лет назад

Hi there I have a problem with my washing machine when I turn it on and the red light flashes when I close the door and it clicks and I press the start button the red light goes off and the washing machines doesn't fill or start what can the problem be

@johnvanbourgondien7073 6 лет назад

Can this stop my machine from finishing cycles

@specialrepair 8 лет назад

How can I check the interlocks in washing machine the model is bosch logixx 9 varioperfect e-nr WAS24422GR/07. The code of the original door lock is 00619468. Contacts are 3,2,1 which bridge cables.because I understand I have problem with the washing machine if anyone knows let's answer thanks

@ivanmaxel 2 года назад

Thank you!

@How-to-repair 2 года назад

You're welcome!

@bzablonsenior9368 6 лет назад

Nice

@likecccp564 6 лет назад

BRAVO

@mirzakausar848 8 лет назад

What is the reason

@eCitizen1 5 лет назад

I really appreciate this video, but would have learned a bit more if you had shown a schematic.

@josepeixoto3384 4 года назад

I don't think anybody understood one bit i did not,and i just wanted to bypass it without blowing the expensive module; what is the common and neutral and live for?

@tonychidi7582 Год назад

Please I need an idea what to do about my washing machine Hisense 8kg, if I put it on it will display f13 error

@How-to-repair Год назад

Very sorry for the late reply. If you use the website I will see if I can find any information for you on this error code but I will need some details off. You have a great Christmas and a happy New Year Hi tony chidi I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/ this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@eh-jay-music 7 лет назад

Hi guys, my Ariston washer dryer combo won't recognize that the door is locked. I hear the lock latch, physically it won't open, but the door lock indicator (button with LED) turns from yellow to red and the unit won't continue. Any ideas?

@eh-jay-music 7 лет назад

No error code, flashing or diagnostic info other than the red LED on the door lock button; that's all. Thanks in advance!

@chipj1295 7 лет назад

and yes, i owe u a beer. hell, i owe u a six-pack!

@How-to-repair 7 лет назад

Iam Glad we could help you if This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances