How do we diagnose and fix a Tv backlight, Lg 32LB550B black screen repair 

Great video. Thanks for taking the time. Most guys would have edited out the call from their wife. That was legendary leaving it in. You made my day.

i repaired my 32LB550U by watching this.. subscribed and liked. thank you a lot

So many times you remind me myself.. get angry when things start to complicate :) but at the end you are the best !

For LED TVs I recommend setting the brightness at about 70% and never at max as this reduces the LEDs' lifespan. I usually replace the dead LEDs with new ones specially if there is more than one dead. Shorting the LEDs will mean that the other ones are being driven harder and they will end up failing too it's just a matter of time. Those LG LED strip connectors don't come out in the direction of the cable but perpendicularly to the strip, they come out pretty easy when you figure this out, I also struggled the first time :D I enjoy your videos, keep them coming :)

Hi Sorin, Thanks for your videos. Today i successfully repaired my first led TV :-) Just based on your video and encouragement that it can be easily done.

Thanks I was trying to power some leds that wouldn't power for a project I'm building and couldn't figure out why. Right at the beginning you said leds are powered by current not voltage. That didn't even dawn on me I was trying everything to power them on but I could only get one on at a time. I increased the current and let there be light. Thanks again.

Nice job bro!! I repair a 55 inch samsung led 2012 and they have smd led rail to left and right ...I guess its a crazy job but i save a lot beacause you learn to me how to open the front of lcd tv THX A LOT MAN YOURE GENIUS!!! NOTHING TO COMPARE STEVE JOB :P

You did an awesome repair

Thanks fot the vidéo, to put away the screws, I use an egg box, it's super convenient!

quick message to thank you for this video, thanks to it I got the confidence to repair the tv, now more than ever, particularly while in quarantine, your content is appreciated, you rock! thanks!

You should have another bigger table or desk for repairing TVs. Nice video, thanks a lot.

Very good Job, very clever thoughtful. You are the Best! Thank you

That thing was a "bastard case" instead of a basket case. WOW, I'm glad you were able to beat this.

very professional to overbridge one led with a blob of solder........

I use a old island from a kitchen. I put it in the center of room and able to walk all around it. If I work on a board I take it to my bench. Works great for me

With TVs it's at least all big and easier to solder. Nice job! Change that black lead please, your life will be easier ;)

"Hello we have here a nice LG Tv it's a nice one yeah" 42 minutes later " How much they sell this rubbish" 😅

hi Sorin greetings from Greece

Sorin, you deffinatly need a new proper work desk. To be honest, seeing you working with that tv facing down on that screen.....it gave me the chills:)). Anyways, good work as usual.

i love your channel Master.

the mighty Eye of Sorin.

Hello hello, that is really nice to me to see how you test and deduct ! I have exactly same trouble . So the first tests where to see if the alimentations where ok ?

You did a good job... keep it up!

You are struggling with that power supply black wire... You need to get it fixed... I am also planning to get two new tables for work,... Will send you picture when i finish them.

Hello, It is very clear that this TV has a led malfunction, and there is every team that draws my attention, okey, there is no silicone gun, but it is not a permanent solution to change those leds one by one. It will be healthier to replace the led bars there with a new one as a strip. As you know, don't forget that the other leds you haven't changed are tired from working. Thanks

And, it's 2020 and you said in this video wich is from 2017 that soon you will have a new desk...3 years pass'ed almost, same desk..lol:D

Thanks you for the video and sharing the knowlegde.

thank you for the video I have learnt a lot, may ask do you adjust the amperes when you apply voltage to leds or when you inject voltage to any part you repair

I think multimeter diode mode could be used to test the leds individually without power supply connected.

Best for Lense replace are Glue T7000 or Epoxi Glue , heat doesnt matter

I fix my panasonic TV, change 3 leds and screen work again, cost me a little more than 1 Euro. a did glue that caps with regular super glue, Locktite i belive and still holds. after 3 years a belive.

Warum werden die Defekten LEDs nicht ersetzt ?

Hey Sorin, maybe you might put the Gopro on a seperate circuit from your test equipment? Perhaps there is some feedback of some sort causing it to glitch? It seems like the Gopro freezes every time you probe anything with your power supply. Hope you can get the gremlins out of it.

Thank you very much for sharing!! I have a question about you: I have repaired the TV according to your guide. Everything was ok. TV worked fine for the next 6 months. After that I noticed that unfortunatelly only one led bar has remain working. Can I use aftermarket led strip in order not to buy the genuine led bars? Can I buy just the leds and replace them? aftermarket What is your opinion? Thanks We love you!!

Do the flashlight test on the screen, to light up the screen from the front side.

LUCKY GOLDSTAR, NOT SO LUCKY

more tv please thenks

Hi Sorin, love your videos, have you done any videos on Samsung LED TVs that the screen diffuser glue fails ending up with rows and columns of DONUT type RINGS on the screen? especially when the screen is on a light background? Apparently you have to re glue the LEDs??? Thanks from Oz.

I have a question about the connectors that you have on your GoPro, both HDMI and the power cables that are connected to it, do they have a filtering coil (Ferrite Bead) right at the end where they connect to the GoPro? if not, that might just be the problem with your GoPro freezing when you plug other devices to your power outlet, cheap cables that are passing spikes into the GoPro.

you took out the screen with the frame?

LG TV more please thenks

Is that MX-4 cooler master paste? Wow.

Thank You

hi there sorin, what did you do with the bad led? removed it or shorted it over the pads underneath? have this same issue and just want to bypass the led so the rest of the strip lights up, thankyou for everything too, very helpful man :)

u could use Duck Tape to mend ur chair n clean up ur table for TV repairs Me think. u could always put them back again. good video educational keep them coming.am it my blind waiting 4 Canada Geese.

me puedes decir si los leds que cambias son de 30x30mm y de 6v ? gracias

Why don't you get a voltage regulator or better quality power adapter for the Go Pro?

Have same TV but backlight on tv is weak, if i short a middle part of led stip than all leds turned on

How do you source individual LED's? I'm looking to find values for an LED strip for a gaming monitor, but I can't find schematics

Magic again :)

This TV reminds me of a program about planned obsolescence.

What did you do to the broken led in the centre when you fix it? Hard to see without microscope.. thanks

Sorin you need a small container to put all those screws in and keep the in one place. Don't you think so? 😀

So only one led was bad and no picture at all? Is there a possibility that power supply is the issue and not the leds?

The repalcement smd led for LG TV is extremely cheap. You can get dozens for just few dollars. As a repair shop, why not have some spare smd led on hand to repair these burned out leds? Replacing led from strip doesn't need to be complicated, just scrape off (or grind down using dremel tool) broken led and solder on replacement.

you need more space ...... AND a new space bar lol

Good afternoon, what is best way to diagnose a faulty LG 50LA620V-ZA TV? When you plug the TV, the logo LG appears on the screen , stays for 1/2 second and goes black. I opened the back case and the LEDs are switching on for that 1/2 second! I’m not sure what can be the problem: Leds faulty, power supply unit, faulty driver? Any ideas? Many thanks!

if gange led the britnes most 50 not 100.nice video.becouse after 3 month led off again

change power supply on the go pro

when he got a shock did u see the one led light up hahahaha

thanks ...

can we check the white led connector for continuity, or in led mode ? (I have no continuity)

Hello squeeze at top and lift the wire out

i dont really get it.so when all led are fine it should measure 140 v plugged and unplugged also?

My LG 32lb55 there's no picture light available please help

How to get electrocuted by a cheap tv 😅 😅. The lesson of this video; no matter how hard it is, don't give up and the impossible will stay behind you. Nice persistence !

37:46 that expression was .... 😂😂

Maybe we all should complain to your boss to make shore that you get your own office.

You should not just bridge out the faulty LED on the light bar like you did, In my opinion that's bad practice and teaching bad habits. Yes it will work for some time but If you bridge out the faulty LED you will put additional stress on the remaining LED's and they will blow also. You said they are current controlled there are current mode PWM controlled. I have fixed several LED strips and its easy to replace an individual LED once you take the screen apart. I use a small heat plate and heat the strip from beneath to remove and replace the faulty LED. Its a time consuming process but that's the correct way to fix the issue or replace the complete bar. The other thing to do is turn down the back light to about 50-70% as that will extend the life of those LED strips.The manufactures push the LED strips to their limits when the back light is cranked up to 100% and that will shorten the life of those strips. The LED strips are failing even on TV's that are within their warranty period due to the excessive stress on the back light LED's.

What glue? Super glue?

can someone elaborate on this 100v.....140v thing Sorins on about?

i see tv repairs today

I wonder why the manufacture didn't put just 3 or 4 LEDs if what he is doing is the case! I suppose each led has 3v so if you shorted them, that means you're giving other LEDs more stress more than 3v, so in the long run, you'll have to go back to the drawing board to fix another one. This is just a temporary fix.

Change the supply board

Dragul meu, nu invata pe altii sa fie carpaci. Asta e LG cu leduri de 6v. Ele sunt deja suprasolicitate, o stii bine. Diferenta de tensiune va cadea pe celelalte leduri deja obosite si durata de viata va scadea. Clientul se intoarce in service, dupa cateva luni, daca foloseste tv-ul nonstop

Te apreciez foarte mult, insa nu pot fi deacord cu aceasta tehnica. Mii de scuze.

Hi, " you get what you pay for ", LCD screen connector no longer has a chassis just glued like a self-adhesive :/

Sorin make video at homeeeeee!!! Dont be lazy :)

Eu am scimbat ledurile arse...Dupa...am ramas si fara imagine si fara sunet...🙂

oh no why do you change not the other lamps?😀

Gopro missing a cap

Yep another rather nasty tv, the leds must be junk!!. I really dont like power leds, they just dont last very long :-( Try not to get stressed out about cheap crap, it is not worth worrying about.

Removing the diode and joining by soldering the 2 pins is the wrong repair this work will only work for a few weeks you can buy on ebay 3 strips for this £25 and replace all LED diode tester only cost £15 could be used to test the LEDs individually without power supply connected.

i not ever going to buy a new led 4k tv, i will keep fixing my old ccfl backlit tvs, the oldest is a lg 32lx2r from 2005 720p been fixed a few times but never the ccfl backlights, ive never seen them backlights fail.. maybe the inverter power supply for lights may fail but not ccfls themselfs, i bet thats why they stopped making them.. lasted too long,

pls sell that gopro and buy a another camera who not always freeze

this is the first time I see you nervous

Oh man, I could feel how much you hated this thing, funny to watch, but really, you shouldn't, it's not worth it :)

You need uv glue.

one lins is missing

I think the problem will repeat with in one month

If you have at least one led in short the tv will turn off himself after a while. The current draw is not the same.

Muy mala reparacion.. Eso no se hace. Lo mejor es cambiar todos los led.. Damaciado taller tenes

You broke the screen ribbon connections to the led screen they are very fragile and its nigh on impossible to fix these cheapos without damaging something!

you need a new chair

"Electrocuted" is when you die. When you just get 'shocked,' you live to see another. I don't think you've been experiencing the former unless you are have hundreds of lives.

bad idea that the leds are wired like xmas tree lights, 100 bulbs 1 dont work, go hunt the bad bulb.....lol

Does no good to show people how to fix things if we can't see what you are doing. Your camera function is terrible.

Can you fix a GoPro? Just joking.

so, not only did you bodge the repair by not replacing the leds that were out, you left the diffuser off the shorted led so that a competent engineer couldnt do the job properly the next time! - ive watched a few of your videos now - you dont repair, you short stuff out and bypass stuff, you break stuff - do you have no pride in your work?