How Fast do They GO?!? | Testing the RC Drag Builds! 

Lower those wheelie bars down.. the front is coming up way to high at tha launch.. remember... you can’t steer with your front wheels in the air..also add some weight to the left front.. it will help it launch straighter

Good stuff! Love the micro truck. Might have to design / print one myself!

4:13 That looks amazingly like the real cars when they stack em up!

Yea that's sik bro!!! On truck adjust wheelie bar. It did chatter but not much. But it would be cool to see a wire chassis flex chassis

that truck is sooooo sick!

Bro the Vette body is sweeeet.

That's cool 👍😎!

Beautiful racers. That micro dragster is the shits..👍👍👍

Put weights in the front so it won’t come up

I dig the baby Larry Larson s10😉

Love that little truck!

That’s very cool

Thank You! Brotha for the Awesome video and the Vette body is absolutely awesome looking and you just helped me with making up my mind on what body to get it was originally between the jconcepts Mustang and the Vette but now that I actually get to see the Vette body on a Team Associated B5M I’m sold on it because I have a RC10-B6 and a RC10-SC5M that I have been working on and I cannot wait until I get done with this badazz Drag Whip I just ordered my TRINITY BRUSHLESS 2.5T MONSTER HORSEPOWER GODZILLA DRAG MOTOR!!! I already got a TRINITY BRUSHLESS 5.5T MONSTER HORSEPOWER “THE REVENGE” GODZILLA RACE MOTOR in my RC10-B6 and it is absolutely wicked fast and I have a TRINITY 7.5T D4 BRUSHLESS RACE MOTOR in my RC10-SC5M SHORT COURSE RACING TRUCK and I know how stupid fast they make these race whipz go so I just can’t wait till I get the drag motor and get it put in my drag whip all that I can say is let the tire melting begin LoL ha ha ha ha ha ha 😎✝️😎 GOD BLESS ✝️

That’s pretty cool dude!

Awesome job man car is killer and I love that micro Mini truck very very surprising

This is awesome

I love your micro mini S10🏁👍👀👍🏁

Great runs and nice body’s I just put together a Arrma typhon 6s and stretched it

Like the paint on the RC

I LOVE THE S-10 !!!! I want one !!!! I own a 2000 S-10 extreme extra cab,,,and it's red

Love the vids man

that looks awesome

New subscriber here, looking forward to more videos like this. Try adjusting the preload on the right shock. I'm new to this segment of the hobby but so far everyone says when it pulls to one side, adjusting preload on the opposite side should help.

Nice presentation Dude..... nice cars to ....... keep it up

Great video love the corvette body. Also was wondering what wheelie bar that was and how you were able to adjust it like that?

Awesome setup you have there...

If it goes right tighten the right shock

Adjust your slipper so you don't pop the front end and get out of the hole smoother with more control.

After the wreck...."Eh. It'll buff out." 😂

Great video, thanks. What christmas tree timing system is that being used for your drag strip and timing? Thanks.

Where did you end up getting that wheelie bar for the B5M? Wicked looking builds btw!

I'm building a slaster I'm learning a lot good look. Oh that mini is 🔥🔥🔥

Cool

Measure the rear tire diameter? Almost seems like you have stagger (like my sprint car for example) cause it to consistently pull right, that or one of the rear springs is sagging causing one corner to bite harder.. Just my 1 cent ;)

I think with a little spring and shock adjustment all the way around you could get it even more straight.very impressed either way it’s hard to get a good drag run rc cars are too lightweight for asphalt.

Can you run any esc and motor in any competition or does just depend on race and your car rocks

What diff oil are you using are you running traxxas motor and speed control

what kind of rc is the mini truck? that thing looks awesome

Try using car rim balancing weights. I used a torch to melt 3 together then installed them in the front of my dragster. Works great.

One more question does the c rating let you go faster I run 7.4 traxxas 2s 25 c discharge rate

If you want to get nice Street launches with the front wheels up in the air you need to change the different fluid to a thicker fluid

Do you think swapping bodies helped with the aerodynamics and downforce? It looks like it did

COOL

👍👍

Subscribed

Nice set up. What motor ?

Just wondering why you don't heat your tires up a little bit. Would help with the traction and lower the willie bars down to keep the front end down some. I believe it would hook up much better if you would hit the bleach box and put a little bit of heat in them tires. But I'm no rc expert nore a real life drag racing expert. But I do know some basic stuff

I need to know what the s10 is and how to build/buy one

Either put the heaviest diff lube there is in your diff or get a spoil. And loosen up the slipper

I didn't see you mention it, whose wheelie bar are you using?

Maybe it would help if u could use something other than metal bearings for the wheels on the wheelie bar. Some type polyurethane or rubber coating on them or mini skateboard wheels of some type would keep the car a lil straighter being tht the wheelie bar would also have a lil traction to help keep it straight. The lil rubber wheels will grab. One other risky thing is cutting the wheelie bar and adding a couple of mini-z or 1/18th scale shocks in the middle or somewhere along the top of the wheelie bar to absorb some of the wheelie preventing the bounce frm making the car change directions

Turn down the streeing dual rate to have better control on mid to top end. Looking good.

You should get belted tires for it that would help a lot with the tire ballooning nice job👍

I think your chassis is twisting a bit under acceleration and adding to the veering problem. Also, check to see that all four tires have equal weight on them.

Maybe too much Ballooning of rear tires throw it off too. So maybe belted tires. i also agree to add weights

How can I build one of my own 1/10 drag cars ? Also where can I buy wheels and tires ?

I noticed right after you crashed and switched to the Vette body is started launching alot straighter.

I used to drag race slot cars if you didn't have that Willy bar down just right you spell out wreck all the time I think if you lower that wheelie bar down just a 16th of an inch more it stopped coming up on a willy and drive straight you probably get faster speeds

Adjust that slipper clutch or firgue somewhere to launch with less power and have the power ramp in after the launch

I know what the deal is with the car going in different directions. Those Titus bead locks are Crawler wheels 2.2 by 1.5 with Your are running proline tires that are for stadium truck 2.2 by 2.0 with. That means you have 1/2 inch extra meat on tires that creates more sag when your running. You need 2.2 by 2.0 wheels and if you tape them then you got your self a tire thats wider than anything that is sold by jconcepts and proline for drag racing, more tire on ground means more grip more traction. But you need a wheel thats going to fit the body because all RC bodys are about 11.5 inches wide. RPM makes a wheel that's 2.2 by 2.0 RPM Revolver (Narrow) must be narrow other you need to modify body. Dont look for beadlock 2.2 by 2.0 no one makes them. Or get 2.2 by 1.5 Buggy tires for 2wd buggy those will fit.

Turn your back tires inside out and wrap the inside with 1" duck tape or electric tape 2 or 3 times. It'll help big time with ballooning on your tires, get you a better grip and straighter line.

I want to know more about the 24th scale RC drag truck.

You may want to swap those titus wheels and those prime tires for a more conventional drag tire. Look at those donuts on your warmup burn out. The car looks like a snake going fast in all directions. Get some belted tires or tape them and you will see a Big difference.

you should do the dr10

Lock the diff it’ll help with going straight down the lane

Can you make a video about the big monster truck rc? And your rc is fast

Great video. Launching straight now?

Weigh down the front?

Nice channel

You did a great job on the paint job on both body’s

can you put a lnk for the mini drag car

Are these custom built cars or can you buy them?

You should tape the tire so it will not pizza cutter on you. Guys here in the 808 doing the 66 feet in 1.5 s /1.6s

Hey man. Where you at? I’m in port Allen. I see the sugarcane and your accent 😂

Tires are ballooning waaaaayyyyy to much bruh! Loosen up the slipper a bit

Seems like the bodies have an effect of its forward momentum. Stick with the low profile C7 body

Is that a custom chassis or a ready to run ?

Would weighing down the front help

Stiffen a spring on the rear may stop it from squatting to much on the right side

Man the body got twisted up sorry I love that body mine is green maybe check it out love this older video 👍👍💯💯🔥🔥🔥🔥🔥

awesome! that 1/24 is cool at 21 mph.. I have a1/24 funny that does 40 mph..

Are you just doing sixty foot passes?

I’d say take the tires apart and tape them. That should help alot

HEY BROTHER WHERE AND HOW ARE YOU GUYZ GETTING DOWN AT YA RACE SPOTS AND DOES THE PO-PO BOTHER YA AT ALL

What gearing you using?

What scale is the mini??

You need to put some more Weight in the front

Is he run 2s or 3a tho

Use like 1000 weight in front shocks

Im subscribe

try running a gyro for stabalizing.

this short truck to mod?

Look into JDS racing for rear wheels pro track tires/rubber isn’t the greatest

Let me get it

If you would add some anti-squat to the slash, it would keep the front tires on the ground so you could actually drive the car. Pulling wheelies is absolutely useless

The wheelie bar has to be almost as wide as the car, & longer than a real car, & barely off the ground just enough for the back tires to compress at takeoff.

New sub#961 cool channel

Great testing on the RC drag show! Check out the smoke show on my channel!

Mine goes over 50 in 66 feet my fastest time was 1.63 seconds

I wanna see u convert the times to real scale times. I may be stopped because if it's already scaled to 1/8 mile is that mean it's running a 2 sec pass. ? Somebody help me math makes my skin itch.