How I Applique On the Ricoma EM1010 

Thank you for the very clear explanation on applique and using the AM/AA keys. I couldn't understand what others were trying to say until I saw you actually post this video. It became crystal clear. Thank you again - I appreciate it.

I've watched sooooo many of your videos multiple times! Thank you for sharing your knowledge. It has helped me !!!

She is a good teacher.

thank you for showing me on how to applique. I was really stuck

Thank you soooooo much for this video! It really gave me the confidence and a lot of helpful information I needed to feel comfortable to press the start button on my new EM1010. LOL. I just got it 2 days ago and I’m feeling very overwhelmed with how complicated it is compared to my single needle Brother SE2000. I miss the simplicity already.

Thank you!!! I am horrible with applique and I was able to applique a shirt for my granddaughter. Thanks for everything!!!

Very nice:) you do a great job explaining the steps so we can follow:)

Hi Jessica. I learned the hard way. I moved my hoop all the way up using the mighty hoop. My machine went into a convulsion. Scary moment I thought it was going to explode. I had to power off. Since the mighty hoop is so strong, I did place it on the neck seam and it worked.

Amazing Job Cassandra. Te deseo muchos éxitos. Bendiciones

Mrs Lopez, as always you helped. Although I have a Brother 10 needle what you've shown is basically the same contempt.As they say you can teach an old dog new tricks.lol I like the idea of the spray will help in my hooping the shirts For me it has been a little difficult to hoop the stabilizer with the mighty hoops. Thank you.

Thank you for the step to step applique instructions

Now this is dope appliqué work! 🔥

I really like your videos! Nice tips that help a lot! Gracias!!!

Thank you. Love your videos ❤️

Very helpful video. Thanks!

That’s smart with the mighty hoop and the metal bar.

Please make more videos like this, for newbies like me 😊

You’re a smart cookie!

This is so nice.

Cassandra, I did that mistake twice of hitting the hoop button to slide out and it totally moved my design and I had no choice but to cancel it...TWICE!!! I meant to call Ricoma Support and find out why it does that? Great Video!

Amazing work! Thank you for sharing the process!!!!! Do you have a video on how you did the 7?

too too good. have to subscribed.

Its smart leaving space, its like simular to if you were screenprint you should have some space.

Thank you I have been scared to do appliqués on my ricoma. What font did you use?

Agreed with you about the design distance; otherwise the name will be to close to the waist.

Hi my name is Barbara like to know which software you were using on your machine on your computer thank you for your time you do beautiful work

Great video you explain everything so clearly. Shirts came out beautiful. Where do you get your designs from?

Adorable ! What is the name of the font ?

Great videos! I like the tip about hooping on the lower front collar to avoid the hoop magnets from passing under the bar. What size Mighty Hoop are you using in this video?

Thank you so much for this video. What size needle are you using for your shirts? What speed are you stitching you design?

Hey girl I am planing on getting a recoma how much do they cost?

Have you checked into the hoop master? Shirts turned out awesome

Hi, can you make a video how you rehopp it?

Beautiful work and so well explained! Question: what is the font name that you used it’s beautiful! And where did you get it from ?

That’s really step by step ! I’m impressed ! But where do you get your design? Please ? It’s so hard to be new and start all this in your head to learn

Casandra, that is a beautiful shirt that you made. I do have a couple of questions. First, is the Ricoma really that quiet? It really did not seem to be very loud unless you did that in the editing of your video. I was amazed. My other question - the left side of the dog partly overlaps the number 3. Where you do have the overlap, do you not remove the stitches on the #3 where I the dog overlaps, at least the satin stitches, so that you don’t have the stitches from the dog going over the stitching of the #3? I would have thought that it wouldn’t lay right because of the thickness of all of the stitches and the two layers of vinyl. I’m just getting started, so this is truly a question because I have absolutely no idea! I hope that I am clear with what I’m asking. With the number 7, is that swirling satin stitching within the number or was that the fabric itself that looked like that? It was really very cute! I totally agree with you on the placement of the design. When I see shirts that have the design lower down, especially if they’ve also made a tutu, so you know that the shirt is going to be tucked in, I can just visualize the name disappearing underneath the tutu.

What software are you using on your computer?

Thank you for sharing this video. It helped me a lot. I have a problem when I use an 8x9 mightyhoop. I use cutaway stabilizer and when I use it for the embroidery machine, the side with the stabilizer is being rubbed back and forth against the machine, which causes it to fray and almost rip. I don't have this problem when I use a 7 by 7 mightyhoop, though. Do you have any advice?

Very lovely. I have a question please. When using the HTV do you remove the plastic part before or after you embroider it down. I hope I’m making sense. Thank you

And do you cut away the back of the Stabilizer ? And add tender touch !?

Cassandra I just bought a EM 1010 and I want to change the needles, haven you ever changed them?

Mine is em 1010 it has a grey hoops not the one u have , do u buy it separately?

How much does this machine coast?

I have a Janome MB7 and have tons of issues with looping. Does the Ricoma have this issue also? I really want a Ricoma but not if there are looping issues. Thank you!

I would love to see a video on how you make your patches for your suspenders.

So the name is done separate from the design?...when you rehoop you just move it the hoop down and recenter for the name? Do I understand that correctly?

Hi. I have a ricoma also. Is your mighty hoops the ricoma brand ones? I’m not sure which hoop to get. Thanks

Do you use the embrilliance Embroidery software for your Ricoma?

How do you create the bold outline for the number 5? Just bought my machine 3 weeks ago

Do you make your own design? Or do you use have a recommendation we’re we can purchase them?

Hola, do you still use SWP or Embrilliance?

I just found your video Hopefully you will see this comment. My biggest issue is finding and keeping the middle on the shirt. Any helpful tips?

How is the tension on this machine

And please what is the number 7 ? What’s the name ? Lovely designs ! Beautiful ! Very I’m pressed

Hi Cassandra, I'm planning to get this machine. What speed do you set your machine?

Can I do this on hatch?

Where did you get Paw pal applique?

WHAT SIZE HOOP ARE YOU USING?

What size of mighty hoop do you use? And what sizes of shirts? Thank you

what software do u use?

Thank you! My 2 daughter’s names end with Y 🤪

where do you get your blanks from, babyblanks.com?

Where do you get the numbers and know the size and isn’t this paw patrol !? Can you different characters and what character is this little gal !?

I find it to much work with too little you can charge

Hi Cassandra! We are so excited to see you creating great RU-vid videos with your machines! We would love to work with you and help you grow your channel! You can contact me at aliana@ricoma.com and we can discuss further details!