How i Built a Garden Room Workshop Flat Roof Quickly - Workshop Build PT4

Подписаться 302 тыс.

Просмотров 96 тыс.

50% 1

I am building a huge Garden Room Workshop and this time i will be showing you how i build the roof for my timber frame structure. I will show you how to make a flat roof right up to the point of EDPM rubber roof preparation.
In this mini series i will be showing you the whole process of workshop or garden room building. We will cover the whole process from start to finish so that by the end, you will have inspiration and guides to build one of these yourself!
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ @thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.

Хобби

Опубликовано:

9 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 227

@TheDIYGuy1 3 месяца назад

Next time we will be finishing the roof and cladding the building. Hope you enjoyed this one

@GameboyAA 3 месяца назад

I did enjoy it also don’t click see more God bless you all ❤

@xMeta4x 3 месяца назад

I hope you go back and glue the EPDM down.

@Jenkirk-le5vs 2 месяца назад

Where is the final video!! I’m checking in everyday!!

@macrozanski 2 месяца назад

@@Jenkirk-le5vsMe too!

@laylaeris5715 2 месяца назад

Me three….are you releasing part 5 and maybe 6 soon, I’m starting mine in 2 weeks and following your design 🙏🏻❤️

@indeed8724 3 месяца назад

I'm so glad you're making videos on how to build a shed, will come in handy when i'm doing it myself in couple of months when it gets warmer.

@TheDIYGuy1 3 месяца назад

👍 it’s built the same spec as a garden room but the principle remains the same for a decent shed.

@cprog 3 месяца назад

I look forward to watching the next one, Thanks!

@TheDIYGuy1 3 месяца назад

Thanks for watching!

@davidmeagher4909 3 месяца назад

Absolutely loving this build series!!! Cannot wait for the next episode!! 😎👍😎

@TheDIYGuy1 3 месяца назад

Thanks 😊

@davekosztan4641 3 месяца назад

look forward to the next episode 👍🏻

@TheDIYGuy1 3 месяца назад

👍

@GameboyAA 3 месяца назад

Great vid can’t wait to see you finishing the roof and cladding the building

@TheDIYGuy1 3 месяца назад

👍👍

@markdyballuk 3 месяца назад

great job, thanks for showing how well you do it

@TheDIYGuy1 3 месяца назад

Thanks for watching!

@woodlyfurniture 3 месяца назад

Neat job. Looking forward too see the end of the project 👍

@TheDIYGuy1 3 месяца назад

Thanks 👍

@garyfrench6350 3 месяца назад

Looking great 👍

@TheDIYGuy1 3 месяца назад

Thanks 👍

@amazing451 3 месяца назад

Nice work Cameron, will be interesting to see your methods of applying the rubber roof. Looking forward to next episode.👍👍

@TheDIYGuy1 3 месяца назад

Thanks 👍.

@blackrainb0w 2 месяца назад

Great build, patiently waiting for part 5.

@TheDIYGuy1 2 месяца назад

Coming soon!

@kevie127 3 месяца назад

Amazing station

@TheDIYGuy1 3 месяца назад

Thanks!

@rutgershenk 3 месяца назад

Enjoyed it. I will use these videos to build my own shed next year. Thank you

@TheDIYGuy1 3 месяца назад

Glad it was helpful!

@svt3941 22 дня назад

Good work, top man

@BarryPaffey 3 месяца назад

On my long list of to do jobs a new shed is next on the list, so this video is very helpful, thanks for sharing 👍

@TheDIYGuy1 3 месяца назад

Glad it was helpful! Good luck with yours

@TheNorthernmunky 3 месяца назад

Such a great job!! Well done mate

@TheDIYGuy1 3 месяца назад

Thanks a lot!

@chrisjnsanders 3 месяца назад

Perfect videos, I’ll starting mine soon. These are a perfect reference to go back to 🙌🏻 cheers

@TheDIYGuy1 3 месяца назад

Your welcome 🤗

@_Miner 3 месяца назад

love to see a cost breakdown of all this after

@TheDIYGuy1 3 месяца назад

Will sort that 👍

@frederickbowdler8169 3 месяца назад

Spot on ...not as easy as you made it look 😊🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

@TheDIYGuy1 3 месяца назад

Thanks a lot👍

@leacullen9491 3 месяца назад

Was just planning a workshop build over Christmas so these videos are well timed

@TheDIYGuy1 3 месяца назад

👍

@Geowebbie 3 месяца назад

Great job, just the video I’ve been waiting for and looking forward to the next one….

@TheDIYGuy1 3 месяца назад

Awesome, thank you!

@user-kk9zf4fx9t 3 месяца назад

Nice job mate good qualty work too.Have a good weekend.

@TheDIYGuy1 3 месяца назад

Thanks, you too!

@shaunsautorepairs5410 3 месяца назад

great series... ive been watching in interest as im planning to build a triangular garage at the bottom of my trangular garden.... 3 walls instead of four

@TheDIYGuy1 3 месяца назад

Interesting! Hope my methods help you

@DjGiluk 3 месяца назад

Great work 👍🏻👍🏻

@TheDIYGuy1 3 месяца назад

Thank you! Cheers!

@Marcxr2t 2 месяца назад

Great series of videos . I’ll be doing a 6x5 garage / workshop my self later in the year . These videos have inspired me to tackle most of the jobs myself. Can’t wait to see the end result and the costings 👍

@TheDIYGuy1 2 месяца назад

Brilliant. Good luck and glad to help

@craigmartin7504 3 месяца назад

Great video chaps 👍👍👍

@TheDIYGuy1 3 месяца назад

Glad you enjoyed it

@jamesduffy5019 3 месяца назад

I’ve got my workshop covered in rubber, been on a few years now and is the Dogs biscuits! Great series as usual mate, nice view up there!👍

@TheDIYGuy1 3 месяца назад

It’s good stuff isn’t it. Yeah I should have double storied it for an even better view 😉

@denisconor648 3 месяца назад

Great stuff

@TheDIYGuy1 3 месяца назад

Thanks 👍

@michaelplays2449 3 месяца назад

Great video Thanks !!!😊😇😊😇😊😇😊😇

@TheDIYGuy1 3 месяца назад

Thanks for watching!

@user-gt5wh8ms2x 2 месяца назад

Hi buddy, It’s great job, thank you so much, that makes me to do my job easy. But still I’m waiting for next part.

@TheDIYGuy1 2 месяца назад

Coming soon. Thanks

@RWBrittoons 2 месяца назад

Built a garage almost exactly the same way about 5 years ago and it was absolutely rock solid. dramas that I came across was the flat roof, They love to leak and the concrete base, ordered ready mix and was too wet when poured and dried dusty. I would definitely go with an angled roof if I done it again and maybe sit the frame on a couple of courses of brick as the bottom of timber cladding goes manky quickly.

@terrywalker4733 3 месяца назад

Hi, very informative and interesting video many thanks.

@TheDIYGuy1 3 месяца назад

Glad you enjoyed it

@markmcgrath4853 3 месяца назад

very good work !

@TheDIYGuy1 3 месяца назад

Thanks a lot!

@IgnatiusZaaijman 3 месяца назад

Nice! I love seeing people doing things properly and professionally. Great series so far!

@TheDIYGuy1 3 месяца назад

Glad you are enjoying it 👍

@Pete.Ty1 3 месяца назад

👍👍👍.Thank you

@TheDIYGuy1 3 месяца назад

Welcome 👍

@alexrutterford6358 Месяц назад

A great presentation and loving the project so far. In episode 1 or 2, you used a lockable straight edge to use with the circular saw - I tried to catch the name and make but couldn't. Would you happen to have a link to one? It could be my saviour - thank you and looking forward to episode 4.

@cmsmithy1234 2 месяца назад

It looks amazing, started watching your videos for some plumbing advice and ended up on this series really good stuff. The only tiny thing is impact drivers hit 110 decibels which can cause hearing loss, I could be completely wrong but thought you might want to look into it

@TheDIYGuy1 2 месяца назад

Thanks for the advice re impact drivers. Glad you like the vid

@sajulldin5147 3 месяца назад

Great vid as always. FYI I bought two garage doors from TWF, I mentioned I saw your video and installed them last week as easy as your video showed. Awesome service from TWF and Google review left. Thanks for your video on the garage door 👍

@TheDIYGuy1 3 месяца назад

Thanks. Glad to hear you had a good experience with TWF 👍

@sajulldin5147 3 месяца назад

@@TheDIYGuy1 yeah it would awesome, couldn't have been better. Quick question, what's the jacket you wearing in this video?

@TheDIYGuy1 3 месяца назад

It’s a snickers workwear jacket 👍

@sajulldin5147 3 месяца назад

@@TheDIYGuy1 thanks!

@Pontelad 3 месяца назад

This couldn't come at a better time i was planning on building a breeze block shed 4x2m this year but now i am contemplating doing it this way as i don't need to dig out foundations then and my ground is already pretty level as i leveled it all last year when i laid a patio for a hot tub and decided to re level the full garden at the same time, i originally decided on breeze block because i couldn't be bothered with wood rotting in 10 year and having to paint it every year, i never even thought of using metal cladding i cant wait to see the end result.

@TheDIYGuy1 3 месяца назад

Thanks for watching. This building will stand for many many years with no painting etc required 👍

@JamesEdwards860 3 месяца назад

Looking good. What is your finished ceiling height going to be?

@danimourinho 3 месяца назад

good stuff

@TheDIYGuy1 3 месяца назад

Thanks

@AlexBubus 3 месяца назад

Amazing video. Thanks for going into so much details. When is the next episode coming out.

@TheDIYGuy1 3 месяца назад

Thanks I’m working on the editing of the next episode for March release but have no exact date yet

@benje302 3 месяца назад

Enjoying this series. Will you do a final cost breakdown when finished ?

@TheDIYGuy1 3 месяца назад

Thanks I will indeed

@txtyams 3 месяца назад

Wow impressive, have you got a video where you build a new garage roof and build a second floor on top of it?

@TheDIYGuy1 3 месяца назад

Thanks. I’m afraid not

@farnyone 2 месяца назад

This video is gold mate...just in the planning process of a 8x4 mtr man cave and come across this...I've subbed and I'll look forward looking thru your previous video.....cheers for the upload

@David-wo8hl 2 месяца назад

Would love to see this finished and also a cost for all of it done...

@simonkemp7386 2 месяца назад

Thanks for this brilliant video. I have a question - do you need to cut a notch (is it a birdstooth?) in the rafters where it sits on the wall plates at the front and rear? Or is the angle so shallow it doesn't matter?

@matthewprice3658 3 месяца назад

when is the next one? loving the videos basically coping your handy work haha

@TheDIYGuy1 3 месяца назад

Haha copy away 😊. Episode 5 has been filmed but took a little longer due to illness and material delays. I’m editing it over the next few weeks for release 👍

@prestigecapture7079 2 месяца назад

Great work what size is that

@user-bo7ji5ll8z 3 месяца назад

Brilliant videos. So glad I’ve found your channel. Are you able to provide rough prices like you did for the base? Didn’t see those on the other episodes.

@TheDIYGuy1 3 месяца назад

Thanks. Will add in some costs later in the series 👍

@barrycorney3665 3 месяца назад

I was considering a build of this size, but seeing how much time it's taken with help I may have to scale it back considerably as I'm so rural I'll be doing it all myself! (maybe "future proof" it by working out a modular system for the walls etc based around 8x4 panels....)

@TheDIYGuy1 3 месяца назад

Yeah it probably takes 10-12 days without filming and two of us.

@royhoward8065 3 месяца назад

Hi mate keep the good work Them boards can you use them in the loft for flooring

@TheDIYGuy1 3 месяца назад

Hi, thanks a lot. 👍

@darrenmackenzie1892 3 месяца назад

Did you need planning for this if so what the best way to go about it?? Great videos

@TheDIYGuy1 3 месяца назад

Not required however you will need to research and comply with the permitted development rules.

@dopey2 3 месяца назад

What span table did you use for your roof timbers?? As I can only see 6x2 c24 timbers good enough for a 3474mm span at 400 centres. Looking at building one above 30m2 and will need to meet regs so just curious. Love the content.

@MuswellMatty 3 месяца назад

Did a cold roof and EPDM last summer. I would’ve hated to have done it in the depths of winter with the amount of storms and rain we’ve had, so fair play!

@TheDIYGuy1 3 месяца назад

Cheers 👍

@MrJoelDavies 3 месяца назад

Cheers for another great video mate, did you need planning for this build? Won't be long before I make my second workshop, just want the next one to be as good as this build.

@TheDIYGuy1 3 месяца назад

Your welcome! Nope, just need to comply with the permitted development rules.

@MrJoelDavies 3 месяца назад

@@TheDIYGuy1 Yeh I believe it has to be within a certain percent of your outside space, if I'm right in thinking that. I just can't be arsed to be dealing with planning or building inspectors, which I'm sure I will do one day. I would find that nerve racking. So much "code" to be aware of I'm sure I would miss something silly yet critical. Also, this is a video I made a while back of my first "workshop conversion" build. If you have a moment, take a look. It's very "monkey" but is still holding up well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YSIcPd91dzA.html

@keitho77 3 месяца назад

Brilliant progress 👍 What do you think the build time would be if you weren't filming?

@TheDIYGuy1 3 месяца назад

I’d say 10 days including the interior, 2 people 👍. Thanks

@georgidzhadzhev9037 2 месяца назад

I believe it is called EPDM

@stevenchilds5774 Месяц назад

Hiya, how much adhesive did you use for the EDPM. Would 5 ltr be enough?

@andrewarcher880 3 месяца назад

Top tip for picking up spilt screws or nails... Wrap a strong magnet in a rag and run it over all the silt little devil's then simply wrap the lose bit of rag back over them, pull the magnet off and tip the little bleeders back in the pot.

@TheDIYGuy1 3 месяца назад

Good tip 👍

@JohnChappell-fh5sb 2 месяца назад

I watched your electrical video on 4 way switches, very well done, as is this. May I ask what qualification's you have? How did you learn so much?🤓 As you seem so generally knowledgeable I'm intrigued. Engineer? Good luck.

@TheDIYGuy1 2 месяца назад

Thanks. I’ve a multitude of experience from time served in a few trades and homes renovated along the way. I also work alongside some amazing people who I learn from every single day and I pass on some of that knowledge.

@TheDudesterUK 3 месяца назад

Great video … always like to watch and it helps me with diy … would be awesome if you sort of maybe had a second channel with some longer videos to show the build in a bit more detail like some other RU-vidrs do? Utilise all of your filming with a longer cut? 🙏 pretty please? 🥺

@TheDudesterUK 3 месяца назад

Also .. plans for the shed? I’m sure there are a lot of people that would want to build the project!

@TheDIYGuy1 3 месяца назад

Thanks for the suggestion. I’m glad you like my videos. I will take the suggestion on board thanks 👍

@nickpotter1897 2 месяца назад

Great video, is that membrane on the walls ok in the rain or do you have to cover it up?

@TheDIYGuy1 2 месяца назад

Yes it’s fine I’m the rain 👍

@ramsaysg Месяц назад

Would 600mm on centres been enough for strength? i.e. reduce costs....

@luvit7567 3 месяца назад

Nice job. New subscriber to your channel. I'm a DIY'r and loving your vids. Can I ask. What makes your jacket? Seems great for the outdoor jobs in the cold?

@TheDIYGuy1 3 месяца назад

Thanks for the sub! It’s a snickers workwear 37.5 jacket

@petercollins6198 3 месяца назад

Thanks Cameron, very clear as usual. We're down in the far south west with very high UV in the summer - I can imagine the rubber drying and cracking after a few years, how long is the EDPM guaranteed for? Or would I be best to stick with a tin roof as was my original plan?

@TheDIYGuy1 3 месяца назад

Your welcome. This Firestone rubber roof is guaranteed for 25 years. You shouldn’t have any issues with the product regardless of high uv.

@elvisoshaughnessy4109 25 дней назад

Hi, why you use rubber roof instead of felt for the roofing

@keithsmith5639 3 месяца назад

How does the rain , run off the flat roof. The wooden structure will move over a time . Dips could be created in the roof structure. Your work is excellent.

@TheDIYGuy1 3 месяца назад

In the previous episode we created a fall when building our walls. There will be no movement or dips, I know because I built one of these three years ago and it stands absolutely spot on to this date

@tuppyglossop222 3 месяца назад

Yup, flat roofs are a big mistake.

@dugbert9 3 месяца назад

if you have to comply with permitted dev rules they are a necessity. Even a mineral felt roof, built correctly, will last up to 25 years. @@tuppyglossop222

@StevieMacVFX 3 месяца назад

Where did you get the EDPM from? Did you just order one big sheet? Did the sheet come with all the glue etc to stick it to the roof? Thanks great vid showing product names etc. As I said before I’m interested in how you’re keeping this ventilated and mould free. Nice job mate.

@TheDIYGuy1 3 месяца назад

All of this came from MKM building supplies as a kit. I gave them the measurements and they send over everything that’s needed. The brand of roofing is Firestone. Thanks

@dl1874 Месяц назад

Do you think single 5x2's are enough for a building span of 3.2m (3.8m including overhangs)?

@anthonyvincent9990 4 дня назад

i would much rather work outside in the winter time than the summer.

@TheDIYGuy1 4 дня назад

Fair 👍

@andrewhayes8469 Месяц назад

how are the joists sitting flush on the walls either end when there is a big difference to the front and back wall heights ? :)

@TheDIYGuy1 Месяц назад

There’s not enough of a fall for it to matter. No birds mouth or joist hangers needed. Just sit them on top

@kenrie20022 2 месяца назад

What is the thickness of the roof OSBoards?

@lesthiele4921 3 месяца назад

What wrong with good old English weather?😃 the shed is looking great, I always thought it was not a good idea to screw into the end grain of timber? Just to make you a little green with envy, we are looking at about 37°C ( about 104°F) today here in Melbourne Australia, best regards from a Kiwi living in Australia, I have now subscribed, Les

@TheDIYGuy1 3 месяца назад

English weather is a pain for building! Thanks for the sub

@lesthiele4921 3 месяца назад

@@TheDIYGuy1 just a bit of information about our weather here in Melbourne, we had 37°C today and looking at about 35°D tomorrow😣

@TheDIYGuy1 3 месяца назад

Nice nice

@andybrace4983 3 месяца назад

Lovely old job.......did you need planning for the project ?

@TheDIYGuy1 3 месяца назад

Cheers, nope all within permitted development 👍

@DICEGEORGE 3 месяца назад

glue? shouldnt there be a 3mm gap between the boards for expansion and contraction? I was thinking to use some flexible stuff between my boards when I do it

@TheDIYGuy1 3 месяца назад

Nope. Your not going to get any movement in those boards.

@RC-oi1gg 3 месяца назад

Why not align your roof joists with your 400 centre studs? Do you think just using screws to hold the joists will be sufficient. Would it have been worth using upside down joist hangers to secure the roof to the main building?

@TheDIYGuy1 3 месяца назад

If you align with the wall uprights you would have to spike the joist down which takes longer. In a previous build I have done this method worked perfectly and the building stands as good as it did when I built it three years ago so I’m satisfied the method used is strong enough.

@mugban6836 3 месяца назад

Great stuff. Is that a Suffolk accent 🤔 like and sub from and Essex brother 👊

@TheDIYGuy1 3 месяца назад

Thanks for the sub! Norfolk!

@rowson9265 3 месяца назад

Miss the videos of general diy and smaller jobs around the home 😔 I still watch these episodes but not a task many of us will undetake.

@TheDIYGuy1 3 месяца назад

Fair enough. I’ve still been doing the general DIY videos every 2 weeks. This is a standalone series. Going forward I want to make a mixture of the two as I enjoy making these longer videos as well as the smaller jobs

@CantEatRS Месяц назад

I’m going to build a 8x6 shed in my back garden, the garden is already flagged if I level out the flags will I be ok just building the shed on them or will I need to have the shed slightly off the floor

@TheDIYGuy1 Месяц назад

If it’s just a simple shed with timber shed base then I can’t see that being an issue providing they are level and have a good sub base.

@CantEatRS Месяц назад

@@TheDIYGuy1 yes it will be and thank you

@roberthossack286 2 месяца назад

hi, what is the fall on that roof? ty rob.

@TheDIYGuy1 2 месяца назад

Hi. 20mm per metre

@bensingleton2798 Месяц назад

I notice you dont use a nail gun for the joist, always thought screws snap.

@TheDIYGuy1 Месяц назад

Well spotted. No need, Screws are only weaker under shear pressure which won’t be a factor on joists.

@blackrainb0w Месяц назад

Is there a part 5 to the workshop build series? On my list it says there's a hidden video and when I try to unhide it comes up as "private" and is inaccessible.

@TheDIYGuy1 Месяц назад

Strange! There is a part 5 on the playlist

@imonw3b 23 дня назад

What is the size of joist please?

@NewcastleMatt 3 месяца назад

Sharp OSB corners do indeed puncture EPDM rubber roofs if you let them flap around. I laid it on top of my roof without tacking it down (which you did). Sanding the corners also a very nice touch to further reduce chances of a 😢😢😢 moment.

@TheDIYGuy1 3 месяца назад

Cheers for sharing 👍.

@ratchriat1716 3 месяца назад

What's the warranty on on the pdm sheet thanks

@TheDIYGuy1 3 месяца назад

25 year guarantee 👍

@MrDavidAMason 3 месяца назад

Head height doesn’t change depending on what timbers you use

@TheDIYGuy1 3 месяца назад

Check out episode 3 where I calculated this. It does change because your restricted to 2.5m under permitted development. A thicker roof means shorter walls and in turn less head height.

@MrDavidAMason 3 месяца назад

@@TheDIYGuy1 ahhhhhhh Gotcha.

@asimhumayun7428 3 месяца назад

@@TheDIYGuy1 Brilliant video! Love it and I'm planning something v similar. What sort of internal height are you aiming for? ie. once the floor is laid and as you've used 6 x 2s? Are you planning on insulating the floor too, with a floating PIR floor for example?

@125sm3 3 месяца назад

Lost count of how many times i have dropped my whole screw box. Then having to sort out all the different sizes 😂.

@TheDIYGuy1 3 месяца назад

😂 always good fun isn’t it

@incorrect1844 3 месяца назад

It’s an epdm :) Loved the video 👍✌️

@TheDIYGuy1 3 месяца назад

Cheers. You know what I meant lol 👍

@kenrie20022 3 месяца назад

Can I use 47mm x 74mm timber for roofing?

@paulstaton8267 3 месяца назад

No there is a rule of thumb , 100mm up to 1.2 span , 125mm up to 2.4 , 150 up to 3.2 , 175 up to 3.6 , 200 up to 4.2 and 225 up to 4.8 , unless there is a central wall then use the rule for span from outside wall to centre 👍

@macsmith6216 3 месяца назад

@@paulstaton8267 You can find a span table online it’s free and is done by engineers

@dugbert9 3 месяца назад

www.alidymock.com/wp-content/uploads/2020/04/Span-Tables-Ali-Dymock.pdf

@ElisaShaffer 3 месяца назад

I’ve been enjoying you stuff for the last few months, question for you… I’m from the US and unless you’re in a dry climate like the southwest it’s kind of frowned upon putting a flat roof on because of water drainage, is that a concern for you at all?

@TheDIYGuy1 3 месяца назад

Thanks. Whilst this is classed as a flat roof, it isn’t truly flat as we have a fall on our roof. More of this is explained in episode 3 where we built the walls.

@NewcastleMatt 3 месяца назад

The only issue I find with "flat" roofs is you sometimes end up with more water escaping down the sides and not down the slope of the roof but in the UK we don't have much choice due to the height restriction (2.5m).

@ElisaShaffer 3 месяца назад

@@TheDIYGuy1that’s right I forgot that you mentioned that in ep. 3. Thanks! 😊

@gregcressey1791 Месяц назад

The tounge and groove are advisable to be on a noggin or supported as it's a flex point even with the glue company's won't honor the warrenty

@TheDIYGuy1 Месяц назад

I disagree but appreciate your opinion

@bensingleton2798 Месяц назад

How many years do you think this will last?

@TheDIYGuy1 Месяц назад

50+ with ease. Firestone roof expectancy alone is 50 years

@paulstaton8267 3 месяца назад

Belts and braces ? Should have glued the OSB to the ceiling joists to, noggins should be in middle up to 3.6mtrs anything over should be in thirds but nice job it’s just a shed 👍

@TheDIYGuy1 3 месяца назад

Never glued the osb to the roof joists. Can’t see the benefit of that one when it’s got nails throughout but thanks for sharing your methods all the same 👍

@paulstaton8267 3 месяца назад

@@TheDIYGuy1 just belt and braces if the job came under building control on a flat roof they would make you same as floor joists 👍

@macsmith6216 3 месяца назад

@@paulstaton8267 Gluing OSB to joists is not a building regulation, not at all

@paulstaton8267 3 месяца назад

@@macsmith6216 if screwed no if nailed yes

@darrenmackenzie1892 3 месяца назад

How much roughly for material costs?

@TheDIYGuy1 3 месяца назад

For this size build fully finished with electrics, heating, insulation etc will probably cost somewhere in the region of 10-12k

@darrenmackenzie1892 3 месяца назад

Will you be building your own storage shed for the garden?

@TheDIYGuy1 3 месяца назад

I shall do at some stage 👍

@dugbert9 3 месяца назад

I'll be interested to see if if you go with a cold, warm or hybrid roof. Are you trying to remain under 2.5m height for permitted dev rules? I'll be building a garden room with a warm roof and I don't know how to insulate at the ends of the joists. I've watched loads of vids but this is never explained well enough for a dumbass like me 😀

@TheDIYGuy1 3 месяца назад

Ah you’ll find out all of this in a future episode 😊

@tomcikjaskolka4833 3 месяца назад

Is that a roof with the slope?

@TheDIYGuy1 3 месяца назад

Yes, episode 3 explains how we created our slope.

@tomcikjaskolka4833 3 месяца назад

@@TheDIYGuy1 I'm running to watch it.

@TheDIYGuy1 3 месяца назад

👍

@davidpiper3652 3 месяца назад

I didn't understand how using 5X2 gives more head height than 6X2. I can't visualise the construction.

@TheDIYGuy1 3 месяца назад

Because your maximum height is 2.5 under permitted development so the bigger joists take up more of your total height giving less internal height when building the wall plates. During the calculation stage in episode 3 this makes more sense

@davidpiper3652 3 месяца назад

@@TheDIYGuy1 Taller walls, thinner roof, more height inside, got it! Thanks.

@TheDIYGuy1 3 месяца назад

👍

@VINSCOT5 3 месяца назад

Waiting for END results. You must be busy it's almost 8-9 weeks since the first video. Weather warnings too. We have very bad stroms too this year. 🙄🙄🙄

@TheDIYGuy1 3 месяца назад

The storms have held us up a little and yes I’m very very busy. I will have another episode for you soon 👍