How I Diagnose and Repair A Dead ATV Winch

Подписаться 16 тыс.

Просмотров 25 тыс.

50% 1

Having an issue with your ATV winch? My winch recently quit on me, so in this video I'll cover a typical winch circuit and go through the basic steps you can try to figure out your issue. I'll review the switches and solenoids and related wiring usually found on a basic ATV winch set up, and cover the steps I use to problem solve.
This video is intended as entertainment, always check with a qualified technician or your dealer before attempting any of the procedures depicted on this channel.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Subscribe to my RU-vid Channel and CLICK THE BELL for videos to get notified when I post a video.
ru-vid.com?sub...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Acoustic/Folk Instrumental by Hyde - Free Instrumentals / davidhydemusic
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/acoustic-folk-instrume...
Music promoted by Audio Library • Acoustic Folk Instrume...
------------------------------
🎵 Track Info:
Title: Acoustic Folk Instrumental by Hyde - Free Instrumentals
Genre and Mood: Country & Folk + Calm
---
🎧 Available on:
SoundCloud: bit.ly/SoundCloud-Acoustic
---
😊 Contact the Artist:
davidrhyde1@gmail.com
/ davidhydemusic
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Check me out on Facebook - myoldsled
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Авто/Мото

Опубликовано:

23 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@scottleppard288 Год назад

I'm thankful for your video. One click with pushing the winch switch and nothing happens. Checking connections and solenoid in the morning, thanks from New Hampshire!

@MyOldSled Год назад

Good luck!

@waypastdone 2 года назад

As always clean, clear and concise. Thanks!

@MyOldSled 2 года назад

Hi Darcy, thanks for watching.

@delsnaturepics3581 Год назад

Thankyou,! the nuts and cables securing the hot leads to my winch looked perfect so I 'd never questioned them being the problem, a wire brush, a dab of dielectric grease, and I am back to plowing.

@stevehobson1887 Год назад

Just put a winch on my Xmark mower in IL, with a switch to operate a snow blade. All worked great in garage. Worked well for 2 ydriveways, then appears to have started to bind up when I lifted it, would not go back down, as I may have gotten a chain link into the winding. Also I may remove 10-20 feet of cable from the winch so there is more clearance on the drum. will try to determine the problem when it gets a little warmer (was -10F) the last few days 12-2022. and will be in 50's next week! thanks for the video!

@MyOldSled Год назад

Yeah unspool it, lubricate it, spool it carefully, then try the things i checked in this video, good luck. Merry Christmas!

@MyOldSled 3 года назад

Stay tuned, I have had the sleds out! Getting colder, starting to see trails open up. Hopefully some riding content soon. In the meantime, I had to fix my ATV winch, so something to watch while we wait.

@navedemor5056 3 года назад

That's a good sign, we've had more trails open down here than you do up there which is weird

@MyOldSled 3 года назад

It's pretty common for where I am. Lake Huron and Georgian Bay seem to dump just to the south of where I am.

@fullthrottleornothrottle9183 3 года назад

Great video Dave keep up the great work!

@MyOldSled 3 года назад

Thanks for watching FTONT...and thank you for taking the time to comment. Really appreciate it.

@farmark457 3 года назад

On my gator snow plow the winch cable was getting wrapped up too twisted so I let a few ft out and lubed the cable and also added a pulley to increase the pull. Worked great after and doesn’t dim the lights so bad when plowing at night. Although the last couple of yrs it’s not getting used much in Southern Ontario. Good video

@MyOldSled 3 года назад

I think I’m going to replace this winch and switch, but hopefully it gets me through winter

@jacksoncornish4051 3 года назад

Great video Dave

@MyOldSled 3 года назад

Thanks Jackson. Glad you enjoyed it.

@HeidiNJames 3 года назад

Welcome back David. And the 360s at the beginning, You party animal, you bad boy You're a crazy son of a gun lmao

@MyOldSled 3 года назад

Hey HnJ! Getting any riding in?

@HeidiNJames 3 года назад

@@MyOldSled We personally haven't due to lack of snow, but others have been out. Soon I hope, thanks for asking.

@eugenethorne5656 2 года назад

Hello great video i have a question the bluee strap you have on your rack to run your cable through where did you get that? thanks for the video

@MyOldSled 2 года назад

Hi Eugene. Princess Auto…if you’re in the US, harbour freight maybe?

@josephfjellgren8456 6 месяцев назад

awesome video, will trouble shoot my winch now, had 20 cm snow this night

@rogersmith7860 6 месяцев назад

Thank you for video I think it is my winch one coming in mail did everything u mentioned in video so winch I think lol

@avid1959 Год назад

Concise and to the point. Question. If you went straight to the winch with the volt meter and got the correct volts, would that essentially negate all of the previous steps?

@MyOldSled Год назад

Yes. In the video I am just going through the whole circuit.

@johnfoster602 2 года назад

The lights on the instrument panel were flickering and engine stalling when I'd slow down or stop to raise the blade. Then I went to do an oil change and the blade wouldn't go up or down. I tested the port to the solenoid whish was good. I checked the wires from the solenoid to the winch but had nothing. I ordered another solenoid and installed it. It's working fine now. I haven't been able to check about the flickering lights on the instrument panel or the stalling yet. I hope it's all good.

@MyOldSled 2 года назад

Sounds like a loose or corroded connection. Start checking wiring….good luck

@bwj3456 3 года назад

Terminals on my winch got loose, would work intermittently. Cleaned and tightness them up, it's all good now.

@MyOldSled 3 года назад

Good stuff. Beats replacing the winch

@upnorthvlogs 2 года назад

I just put my plow on the wheeler and put new carbides on sled I’m hoping for some snow this year Minnesota

@MyOldSled 2 года назад

Good luck

@upnorthvlogs 2 года назад

@@MyOldSled same to you let’s do snow dance this year

@CountryBoy6969 Год назад

Great video, I believe I have the same issue, I hear the clicking from the relay and it worked before my four wheeler got stuck in a creek and the winch got submerged under water. I'm going to try to redo the connections and see if that works. Anybody have any tips for me?

@LITTLEROCKSHORES 3 года назад

Did you put some kind of corrosion inhibitor on those terminals after cleaning them? If not, you will get to do this activity again soon.

@MyOldSled 3 года назад

Hi Littlerock. Lithium grease. Thanks for watching!

@ArmedOutdoors 9 месяцев назад

Is there a video where you installed the winch? I have the same atv but no good place to install a winch

@MyOldSled 9 месяцев назад

No sorry but it’s pretty simple a plate mounts to the frame. Msg me on Facebook and I can shoot you some pics when I get time

@raymondburelle3425 3 года назад

Trails finally opened up in my neck of the woods last Tuesday already got about 400km laid down this year

@MyOldSled 3 года назад

It looks like its starting to turn around a bit. I got out and played a bit to run out the cobwebs.

@truenorthmuskoka9077 3 года назад

My winch cable was all twisted up and frayed from the previous owner. Not knowing the age of the winch I ended up replacing the entire winch with a new one that was on sale. Im curious about your setup. You have a pulley on yours. Mine is simply attached to the blade directly from the winch. I suspect your way has less force on the winch. You should do a video on that.

@MyOldSled 3 года назад

There you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8EfMnXnmj0s.html

@truenorthmuskoka9077 3 года назад

Thx Dave. Did you end up drilling that hole to move the pulley further out. Did that work out better.

@MyOldSled 3 года назад

No. Sometimes you just turn around and its next year already.

@viktor7495 3 года назад

Can you do a quad riding video ?? Missing the content

@wilrukakoski3441 3 года назад

I’m not getting spark on my 1985 cougar 500 Is it possible to clean my coil?

@MyOldSled 3 года назад

I don’t know, but I would guess no. Its basically a transformer. When they go, its going be the windings inside are shot or shorting etc. Have a look, see if theres anything to can clean but other than connectors, I guess no. Are you sure its the coil? Have you tried unplugging your main harness to rule out a bad ground? Checked the stator etc..

@maxyo54 2 года назад

have the same issue with my winch, just bought a new solenoid, the body is plastic, the old one is metal that the ground is hooked to, how do I ground it using the new solenoid?

@MyOldSled 2 года назад

I would check with the manufacturer. Ive seen some that have a ground wire, but i wouldn’t want to steer you wrong

@maxyo54 2 года назад

@@MyOldSled thank you!!

@rebeccab.6178 Год назад

Hi I have a problem wuth my winch/solenoid can you help me

@MyOldSled Год назад

What’s up?

@glenking3337 8 месяцев назад

When a winch is disconected from all wiring, should there be continuity between the two poles?

@MyOldSled 8 месяцев назад

Yes

@glenking3337 8 месяцев назад

@@MyOldSled thank you

@MyOldSled 8 месяцев назад

Mmm actually wait I think I misread. There would be continuity through each winding but not just if you put your leads on the pos/neg lead. Google testing a motor you’ll find lots of info.

@jedidiah5131 5 месяцев назад

I have power to my winch, I can hear it running when the out and in switch are used but the drum isn't turning and I can engage the free spool but I cant pull out any cable...Does anyone have any ideas before I pull it apart..I bought it used and didn't use it for a few months but it was working when plowing for the last few snowfalls..

@MyOldSled 5 месяцев назад

Im guessing one of the gears in the gear train grenaded.

@dani6293 2 года назад

Im Glad I Found You

@strafto04 Год назад

This is exactly what I was looking for but you cruised through some of the steps of using the multimeter and I’m still somewhat lost. Oh well.

@MyOldSled Год назад

I’ll be doing a video on how to use a multimeter, this one is problem solving a winch.

@coreysullivan7401 2 года назад

Hi I gave my father in law aa Bost I fried my batter and now my winch won't work I have nothing no clicking when I hit the switch. I know it's not the winch it's self because I tested it with power to the winch and it worked fine. Any idea what's going on?

@MyOldSled 2 года назад

Everything about problem solving is in the video.

@brandoexplorations9202 3 года назад

Hi could you do a video on how to diagnose a sled that dosent stop running after key and tether have been removed i have been looking everywhere and still have not found anything about this subject i ran a new ground checked all my wirring and still cannot find the problem. Thankyou

@brandoexplorations9202 3 года назад

1996 mach 1 670

@MyOldSled 3 года назад

Ill think about how to create some content, i haven’t had that issue so I’ve never problem solved it. My guess is a bad wire or connection keeping it from grounding out. Electrical issues are a lot of trial and error.

@MyOldSled 3 года назад

Actually, thinking about this one, I have to be clear I'm not a sled technician, I'm a guy with a sled who likes to tinker. Your tether and kill switch are safety features, and need to be working properly so I don't want to steer you wrong. I know on my rev the kill switches are prone to fail. They get dirty and won't ground properly. I've never had this happen on my 670. If it was me I'd be checking each switch for continuity, checking the main wiring harness connection since both aren't working. Check the wires right from where they come out of the stator. Sorry I can't be more help. Check Doo talk, some really knowledgable guys there.

@brandoexplorations9202 3 года назад

@@MyOldSled allright thankyou

@MyOldSled 3 года назад

Lol. Omg guess what happened to me Brando?

@allendorf82 2 года назад

Just put a winch on my polaris an the solenoid just clicked I put power to the winch directly an it powered it both ways so I bought a new relay an it still just clicks currently looking for my volt meter lol

@MyOldSled 2 года назад

Then i would guess it must be the wiring between the solenoid and the winch.

@viktor7495 3 года назад

I have had this happen so many times I keep a rachet strap to raise the blade

@MyOldSled 3 года назад

That is a great idea Viktor.

@MyOldSled 3 года назад

I wish I'd thought of that when I was making this video.

@viktor7495 3 года назад

What should I do if I lose steering

@MyOldSled 3 года назад

Can you be more specific? Are you asking about what to do when it happens or how to fix it? What do you mean lose steering? Do you mean the skis aren’t turning or you’re sliding around?

@viktor7495 3 года назад

@@MyOldSled if you are going down a trail and you're skies wouldn't turn what would you have done in this situation

@MyOldSled 3 года назад

Hmm. Never happened to me, but you do read it happens from time to time, bolts fail, parts brake. I'm no expert, but I can't think of a lot of options other than try to come to a stop as smoothly and safely as possible. Let off the throttle, apply brakes smoothly, don't shift my weight at all. Probably end up getting towed. What would you do?

@viktor7495 3 года назад

@@MyOldSled I ask because I had my handle bars brake off and no steering is sketchy so asking for the next guy

@MyOldSled 3 года назад

hehe, yep, no steering is sketchy. So what did you do?

@dani6293 2 года назад

I AM Subscribing To Your Channel Thanks Hun I Love The Step By Step ♥

@MyOldSled 2 года назад

Mostly snowmobile stuff, but hopefully more ATV content this year.

@dani6293 2 года назад

@@MyOldSled thank you hun ♥

@dani6293 2 года назад

Thank You Hun Cleaned The Studs On My Winch ll Works Great Thank You I Have 2007 Can Am Outlander Xt 500 Max HO Hugs

@MyOldSled 2 года назад

Awesome Dani. Glad it helped.

@dani6293 2 года назад

@@MyOldSled I Could Give You The Biggest Hug nd Thank You SO Much We Had A Big Storm Up Here In Northern Maine It Saved Me ALot Of Money Thnk You Again Hun Hugs Tight ♥