How I fixed and HDMI-modded the AVGN's Nintoaster

Подписаться 1,3 тыс.

Просмотров 18 тыс.

0% 0

(An meine deutschen Zuschauer: Untertitel folgen bald! Weitere Informationen bei 0:39)
[EN] Guess what, I'm not dead yet! After almost three years of radio silence, I check back in to present you the repair log of the Angry Video Game Nerd's Nintoaster, which has recently been re-introduced to the series. It's now once again fully functional, including a newly done HDMI-mod for better video output. I hope you enjoy the build video!
[DE] Es mag überraschend kommen, aber ich bin noch nicht tot! Nach fast drei Jahren Funkstille präsentiere ich hiermit - ebenfalls etwas unerwartet - den Reparaturprozess des Nintoaster vom Angry Video Game Nerd, einer Spielekonsolen-Ikone der englischsprachingen Retro-Szene. Das Gerät ist nun wieder vollständig funktionstüchtig, inklusive des neu eingebauten HDMI-Mods, der eine bessere Bildqualität ermöglicht. Ich hoffe, das Video gefällt euch!
Check out James' channel for new AVGN episodes:
/ @jamesnintendonerd
The original Nintoaster instructional video by Richard:
• Nintoaster Instruction...
Hi-Def NES Modkit:
www.game-tech.us/product/hi-d...
~ MUSIC BY TIMECODE ~
00:01 | Super Mario Bros. 2: Overworld Theme
00:39 | Super Mario 64: Water Theme (Dire, Dire Docks)
01:07 | Luigi's Mansion: Professor E. Gadd
01:53 | Mario Paint: Creative Exercise
03:07 | Celeste: First Steps
04:07 | The Legend of Zelda - Ocarina of Time: Hyrule Castle Courtyard
04:57 | Super Mario 64: Cave Dungeon (Hazy Maze Cave)
05:41 | Journey to Silius: Title Theme
06:22 | Battletoads: Title Theme
07:34 | Animal Crossing: Nook's Cranny
08:14 | Super Mario RPG: Beware the Forests Mushrooms
08:49 | Kirby's Dream Land 2: Title Theme
09:57 | Pictionary: Title Theme
10:44 | Silver Surfer: Level 1
12:44 | The Legend of Zelda - Ocarina of Time: Shop
13:45 | Castlevania: Vampire Killer
14:39 | Donkey Kong Country: Gang-Plank Galleon
15:19 | Mega Man 2 - Dr. Wily's Castle
16:57 | Bucky O'Hare: Red Planet
19:16 | Teenage Mutant Ninja Turtles: Title Theme
21:27 | Duck Tales 2: Niagara Falls
23:26 | Over Horizon: Stage 2
25:06 | Metal Gear: Alert
25:56 | Teenage Mutant Ninja Turtles IV - Turtles in Time: Sewer Surfin'
26:48 | The Legend of Zelda - The Wind Waker: Inside a House

Игры

Опубликовано:

28 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 139

@noskap 3 года назад

This Nintoaster belongs in a museum. I've watched the instructional video at least a hundred times over the years.

@Cheez-It92 2 года назад

I honestly just rewatched the fabled Nintoaster Instructional Video that I like to revisit every so often. And to my surprise this was right underneath it in the search. I knew that the AVGN's had broken and that he had it repaired and upgraded, but I assumed it was from a professional modder and not a fan, so this was a special surprise! I loved this video, the good, the bad, everything. I will be revisiting this one from now on too, good work!

@Prismary 2 года назад

Thank you very much, it means a lot to me! I was also very surprised by how much trust James put into pretty much just a stranger on the internet with no portfolio to speak of when I sent him the initial offer. Oh, and as a sidenote: I'll actually be going professional with modding services soon. Doing mods like these is simply a lot of fun after all.

@GHero60 Месяц назад

As someone who has made their own nintoaster this was amazing to watch. It’s great having HD footage of the inside of the actual nintoaster.

@Kirbylight2 24 дня назад

This deserves more views. It’s really cool to see the restoration of the OG Nintoaster

@FunnCubes 3 года назад

Great job, boss! Good to see that legend of a console back in business. Would have hated to have seen it be shelved. And yes, please more like that!

@Tiosh 2 года назад

I hate to be "that guy" but you deserve way more likes on this than you have. This is awesome.

@RetroPaolo 3 года назад

Thanks for recording in English, mine Deutsch ist nicht so gut! 🤣

@Kaiser_Adam 8 месяцев назад

Mein*

@Kaiser_Adam 8 месяцев назад

I’m fucking with you lol

@Luie_Claudio 3 года назад

Man, you are amazing. I really missed the Nintoaster and you did this great job.

@erikbeltran2608 Год назад

Build my own Nintoaster is on my bucket list. Thank you for sharing this masterpiece project!

@Gnomechild Год назад

Amazing job from someone so young! Truly german engineering, sub

@chicosuavae6764 2 года назад

Glad to see how the Nintoaster was fixed. I've recently been interested in wanting to learn more about how to fix electronics. I just fixed Xbox 360 a while back. Disc drive was bad so I replaced it. Learning little by little. Love these type of videos.

@BOTCHED 3 года назад

You're a saviour! Long live the Nintoaster!

@esbeekay 3 года назад

Great job and thanks for working hard to provide us all with entertainment through James

@BasedAri 3 года назад

Stellar video. Well structured, simple to understand, and kept me glued to the screen for all 27 minutes of it, and that's something hard for me. I also appreciate the timecodes for all the classic songs you used. Keep up the good work!

@Prismary 3 года назад

Thank you so much!

@Waytotheland Год назад

Dang this was so cool! So much work you did and it turned out so cool! Kudos to you for you're hardwork:)

@kurtkurt777 Год назад

Great work! I'm glad everything went well.

@RayceARoni 3 года назад

Loved this video! I say definitely do more videos like this!

@Hanz_M 2 года назад

That was amazing work ya did there. I liked the video a lot.

@extremehightech 3 года назад

This is incredible, thank you!

@StillTheBest1973 3 года назад

insane work

@KontrolStyle 3 года назад

Great work!

@999FORLIVE 3 года назад

that’s crazy good job!

@looneybinjim 2 года назад

Awesome work!

@PhobosDDeimos 2 года назад

Mit dem Billig-Dremel von Lidl xD Den benutze ich auch

@andrewdevitt2238 3 года назад

Doing the lord’s work

@herr_passiv775 3 года назад

Er ist zurück!

@MrNicholas7 3 года назад

So when someone repairs or upgrades the console in another 10 years, will they find your own signature/date hidden somewhere?

@Prismary 3 года назад

I certainly didn't leave it unattended. We'll see once that happens!

@deinemamainhd 3 года назад

Dude!!! You're on to something...

@mikezhoucreations8536 Год назад

Thanks for making the Nintoaster back from the fried!

@maxpayenvenic6029 2 года назад

I never thought NES game could look this good on HDMI modern tv <a href="#" class="seekto" data-time="1152">19:12</a>

@Prismary 2 года назад

It's really impressive how far people like Kevtris who really know what they're doing can take a simple modkit. It's just unfortunate it's been sold out everywhere for ages now because some chips have reached end-of-life so the board needs a bit of re-engineering

@bborigun 3 года назад

It's much more difficult to make changes to other people's mods than to a factory-made one, simply because mods (especially like these cramming-in kinds) sometimes *has* to involve some kludging or bodging. The knob is probably glued in because it kept falling out. I've been there. Great work. Maybe with a better soldering iron (with proper temp. control) you'll find the job so much easier.

@Prismary 3 года назад

Thanks! My soldering iron isn't actually that bad, it has temperature control, I might have to stock up on some better tips though. I mostly had problems with the de-soldering equipment, I've gotten a better solder sucker since that works quite well. Might get a de-soldering station at some point.

@elvergutierrez7790 3 года назад

Holy shit your only 17! By the time you’re 30 you will be an expert in this dude!

@Prismary 3 года назад

I'll sure try to keep improving!

@ssquirrel88 2 года назад

"You must be upgraded, Upgrading is compulsory"...Dr Who, Cybermen

@awilliams1701 3 года назад

I found this video while looking for the original, which I was randomly in the mood to watch. I didn't even know it was broken (I've missed a lot of AVGN). After watching the original I came here. Awesome work dude! I was a little concerned about the cables for the chips. I have a modded commodore 64 that has both NTSC and PAL VIC-II chips. The guy (perifractic of retro recipies) that designed it actually tried this method and it messed up the video signal. It's also why it only works on the old "breadbin" C64's. It has to be a fully self contained PCB that sockets into the original VIC-II socket. It works great though. I'm glad you didn't have the same issue with the nintoaster.

@Prismary 3 года назад

Thanks! Very interesting to hear about actual issues the wires could have caused, I too am very glad it worked out in my case. Would have been a nightmare trying to fit the chip stacks in without moving them away from the board.

@awilliams1701 3 года назад

@@Prismary I'm not really sure, but he has the design process on his channel. He went through many prototypes with PCBWAAAAAAAAAY. lol You actually get 2 with the kit because the chip fits in differently depending on the board you have so he includes both versions to get you covered. I have the 2nd one on my wall. lol One of my favorite videos of his was fixing a C64.....with a hammer. LMAO He lightly taps the chips and it randomly started working. It wasn't the only issue he had but it was still funny.

@arceus413 3 года назад

legend

@gordon_freeman2542 Год назад

Hearing some music from Super Mario RPG Legend of the Seven Stars in the background made me cry.

@Basimbel 3 года назад

This is so Poggers

@willxowo 2 года назад

wow owo amazing lol, good job helping him fix that, i have no idea how cutting and gluing parts together somehow fixed it.. I don't even know how one can know what all those pins do.. i'd be afraid to break it just by touching it xD you're pretty talented.

@Prismary 2 года назад

thank you!

@alfredocalzadilla7251 8 месяцев назад

Awesome video, thanks! So I've decided to start a NES rgb toaster project. A lot of thinking and massive amounts of work have gone into it, and I am still not anywhere near half-way done. It is a huge project, but I am trying to do it the right way; no hot glue, actually no glue at all. All pieces are custom made pieces that can be bolted on or snapped into place. I might make a video of it once it is done and upload it.

@Prismary 8 месяцев назад

Wow, that's a huge effort, but would make for a very clean and serviceable result. I'd love to see a video on it once it's finished!

@coolstuffgaming 5 месяцев назад

seeing this gave me remotivation for solidering projects again, great vid! super impressive. I can't even do a 1/10th of what you do at 18 lol out of curiosity, was this all out of pocket for you?

@Prismary 5 месяцев назад

I'm so glad to hear that! Practice makes perfect, and believe me, it's not all too hard once you get the hang of the basics. And no, it wasn't out of pocket for me. James paid for both the shipping and the modkit.

@aryezz 3 года назад

cool

@aryezz 3 года назад

and good

@lolo03 3 года назад

@@aryezz Arr, i guess u are the Dogecoin millionaire from Switzerland?

@aryezz 3 года назад

@@lolo03 Not a millionaire... YET!

@omarguerrero6417 2 года назад

just surprised their isn't any nestoaster sold on Amazon

@vgnavigator9373 Год назад

"3.7 Megatonnes of epoxy" that tickled me haha

@RetroGamer7200 3 года назад

Taking the knob off is easy. There's a small hole in the side with a small retention screw that you just loosen to take it off

@MTWas 3 года назад

I love it. Where have you learned that? I would like to see more of this content.

@Prismary 3 года назад

It's just a couple of years of experience. I'm quite enthusiastic about the technical side of these old videogame systems so I like to tinker with them and also fix broken consoles every now and then. Soldering is actually much easier than it might look, just all about practice.

@MTWas 3 года назад

@@Prismary I understand. For me, it's interesting, but I don't know how to get my hands on something like this.

@Prismary 3 года назад

@@MTWas A good place to start might be to just buy a defective system for cheap and trying to fix as many things on it as you can, a prime example would be a GameBoym but anything will do. Just give it a shot and experiment a little.

@MTWas 3 года назад

@@Prismary I will try to find something like that what you described. And also, I think that I have something like that, but I have to find it. Thank you to reply my questions.

@sky_shu 3 года назад

@@Prismary as someone who is starting to learn the basics of these sorts of things. I agree. My 1st project was taking two broken DS lites and frankenstiening them back to life. It worked in the end. Though the touch screen no longer works. Not sure why. Prehaps I was too rough with a ribbon cable.or connector

@zyzzy-ko4ww 2 года назад

<a href="#" class="seekto" data-time="38">0:38</a> This bit with AVGN (as in James AVGN Rolfe) putting a PS2 game in a Nintoaster doesn't even care it's purely for LOL.

@iSquishy89 Год назад

Any idea what the technical issue with the legend of kage episode was?

@Prismary Год назад

Not really, but I assume it was some sort of configuration issue with his capture card that sort of misinterpreted the output, since the HDMI signal from the console worked just fine when I tested it and he managed to fix it quickly in the next episode once people pointed it out

@rod2396 3 года назад

Really nice vide ^^ good job mate. See ya in 5 years again. LMAO

@WhoCaresAnymoreTho 3 месяца назад

This vid should have more views🤔

@WA_Stokins 2 года назад

No offense, but did the wires to the chips introduce any lag? You were kinda vague saying that it “shouldn’t” lol

@Prismary 2 года назад

I didn't do any extensive testing, but as far as I could tell, they didn't. I also believe that if the added latency had a significant enough effect, it wouldn't result in lag, the console would just no longer function properly

@FadingBulb57227 3 года назад

Where is the link for james update about the nintoaster

@Prismary 3 года назад

He showed it off in one of the recent episodes called "The Legend of Kage"

@kneckt100 3 года назад

How do you do with the hdmi from the card to the port?

@Prismary 3 года назад

I'm not exactly sure what you mean, but in the video I did show the extension cord I used to connect the Hi-Def daughterboard to the port on the casing

@camerickoo4333 2 года назад

This goes for anyone I guess, but where should I start if I want to get into electronics? I want to build by own Nintoaster in the future. Additionally, I thought you also modded it to play PS2 games, or was that a joke the nerd said?

@Prismary 2 года назад

I can't speak for everyone, but personally I got into electronics by doing basically what's in the video: Just tinkering around with random devices, trying to understand how they work, fixing things and eventually doing some mods. It helps a lot if you get the basics of the matter down, pretty much what you'd learn in physics class. Voltage, current, resistance, capacity, what kind of electrical components are there and what do they do, how to read and draw simple circuit diagrams, using a multimeter, and so on. Practice soldering and tinker with some simple devices that are easy to understand, try fixing some devices that are broken. As long as you're doing something you're on the right track, it's all just a matter of experience. Building a Nintoaster also isn't all that hard, just takes some understanding of what you're working with and inginuity to make it work. Oh, and about the PS2-capability, that was indeed just a joke.

@camerickoo4333 2 года назад

@@Prismary Alright awesome, that's exactly what I've been doing so I'll keep it up as well as try to get a better understanding of the basics and of each component with whatever I'm working on. I'll study how to read and draw circuit diagrams, so thank you! Who knows, maybe I'll build the first Nintoaster III that will have PS2 compatibility if that's even possible.

@Prismary 2 года назад

@@camerickoo4333 I wouldn't say it's impossible, however the PS2 mainboard is quite big so you'd have some serious difficulty trying to make it fit into a toaster shell. You could however align the disk drive in a similar fashion to how the cartridge port is mounted in the Nintoaster, so it'd look pretty cool.

@sistersotaku7092 3 года назад

👀❤

@jannis.493 3 года назад

Hey wollte dich was fragen bezüglich deines minecraft Accounts! Kann man sich iwie mit dir in Kontakt setzen? Über Discord z.B?

@Prismary 3 года назад

Jo, mein Tag ist Prismary#7648

@omega17ds 2 года назад

Does anyone know if Richard is aware of this video? If not, I am sure he would be proud of how far this toaster has come!

@Prismary 2 года назад

James did tweet about it upon its release, but I've not heard of Richard having seen it thus far

@Radeo 7 месяцев назад

@@Prismary Well...he's seen it now.

@Prismary 7 месяцев назад

@@Radeo How do you know?

@Radeo 7 месяцев назад

@@Prismary From his 9+hour live stream a few days ago.

@iiiiiifggffggffgfgfg Год назад

Couldn't the scratch be hidden with some of that polishy stuff?

@Prismary Год назад

maybe, but i've never really messed with polish before and didn't necessarily want to take the risk of ruining even more of the case

@hellnawman 3 года назад

omg ich habe grade ein pokemon video von dir gesehen bruder stimmbruch hat ja richtig reingekickt xD

@Prismary 3 года назад

Naja, ist schließlich auch schon vier Jahre her, aber in den noch früheren Videos ist das sogar noch schlimmer xD

@eyeinthesky450 3 года назад

Hehe nintoaster

@lampshade162 3 года назад

wusstest du das du in einem fitmc 2b2t video zu superweapens drin bist und da von ihm angegriffen wirst?

@Prismary 3 года назад

Ist mir bekannt, das ist schon ne ganze Weile her, aber er hat die Szene irgendwie in seiner Stock-Footage für Superweapons drin, und immer wenn er darüber redet, blendet er das ein. Kommt ursprünglich aus nem Livestream, wenn ich mich recht erinnere

@lampshade162 3 года назад

@@Prismary spielst du noch auf 2b2t?

@Prismary 3 года назад

@@lampshade162 Theoretisch ja, bin aber seit mittlerweile über einem Jahr aufgrund der extremen Queue-Sitaution ziemlich inaktiv

@lampshade162 3 года назад

@@Prismary im moment geht es wieder ein wenig im vergleich zu vor 6 monaten Jetzt hat man mittags manchmal keine queue unter der woche Aber am Wochenende und am abend muss man immer so 80 bis 100 spieler warten

@Prismary 3 года назад

@@lampshade162 Mit Priority vielleicht, ohne sieht das auch aktuell noch um einiges düsterer aus

@maksitaxi Год назад

will you ever come back to 2b? 😄

@Prismary Год назад

who knows what the future may bring! i never officially quit after all...

@maksitaxi Год назад

@@Prismary hit me up bro :))

@Prismary Год назад

@@maksitaxi my discord dms are always open

@marshallramirez3068 2 года назад

Does anyone know a person that can modd my not working nintendo In a toaster just like the angry video game nerd‘s I’ll even send the toaster and then nonworking original Nintendo which also needs to be fixed to

@Prismary 2 года назад

I could probably do that for you, shipping might just get a bit expensive if you're located outside of Europe. If you'd like to discuss this further, shoot me an e-mail: prismary@prismarray.net

@marshallramirez3068 2 года назад

@@Prismary ok awesome I’ll send you a message now

@Prismary 2 года назад

@@marshallramirez3068 Did you actually end up sending me a mail? Just wanting to make sure because I didn't recieve anything so far

@marshallramirez3068 2 года назад

@@Prismary yes I will do it now I apologize work has been crazy my friend

@marshallramirez3068 2 года назад

@@Prismary sent you the email

@NintendoDude888 4 месяца назад

Did Richard see this video

@Prismary 4 месяца назад

Yes, he watched it on stream a month or so ago

@Clash-yp8qy 3 года назад

Du existierst ja noch aber wieso auf Englisch

@Prismary 3 года назад

Die Zielgruppe für das Video ist hauptsächlich englischsprachig, hätte keinen Sinn gehabt, das auf Deutsch zu synchronisieren. Eventuell mach ich noch ne zweite Version auf Deutsch, gibt aber auf jeden Fall bald Untertitel

@mohammed_K1 3 года назад

The real question is Why did the device maker himself not repair it 😐😐😐😐😐😐😐

@cheddercheese4910 Год назад

Yeah hmmm interesting 🤔🤔

@WClap 3 года назад

Bruh I play on a real toaster.

@rdaws73 3 года назад

Hdmi picture quality still looks like poo

@Prismary 3 года назад

How so? The output seems flawless to me, I don't know how you got to that conclusion, but the line artifacts in the debut episode were a video caputre issue - he fixed it in the next one

@rdaws73 3 года назад

@@Prismary ahh I figured. Good work. Did you just use hot glue to mount the board back up? Im doing a Nintoaster with this exact toaster model.

@Prismary 3 года назад

@@rdaws73 You could probably get away with hot glue, but I'd avoid it whenever possible since it's not a particularly strong adhesive. I used component glue, which worked pretty well.

@rdaws73 3 года назад

@@Prismary Like silicone? What brand did you use? I might make some sort of bracket if its too much of a pain.

@Prismary 3 года назад

@@rdaws73 Any kind of stronger epoxy will do. I used two component adhesive from UHU, but I'm pretty sure you won't find that brand in the US. It's not that important anyway, just use something that isn't too weak