How I Got The PERFECT STANCE On My 2019 MUSTANG GT Premium WITH NO RUBBING LOWERED 5.0 S550

Подписаться 9 тыс.

Просмотров 71 тыс.

50% 1

I lowered my Mustang GT to get the perfect stance and this is how it turned out. If your looking to lower your own s550 mustang I recommend steeda parts as it makes the wheel fitment perfect on the performance pack mustang gts. There is no rubbing or bottoming out of any kind so it looks and feels great while driving. Please leave a comment and share this video!
**NEW UPLOAD EVERY SUNDAY**
**TUNE WILL BE ORDERED AT 2000 SUBSCRIBERS!**
PLEASE SUPPORT THE CHANNEL BY HITTING SUBSCRIBE!!: www.youtube.com...
FOLLOW ME ON INSTAGRAM: / canadiancruisin
WHAT'S DONE SO FAR:
-Steeda Subframe Braces
-Steeda Subframe Bushing Support System
-Steeda Extreme G-Trac K-Member Brace
-AWE Touring Catback Exhaust
-Steeda Progressive Sport Lowering Springs
-UPR Billet Oil Pan Plug
-Window Tint(5% rear and corner windows/45% on sides)
-25mm Spacers on all 4 corners
-Diode Dynamics LED Smoked Side Markers
-Diode Dynamics LED Reverse Light
-Diode Dynamics Interior LED Lighting
-Anchor Room Headlight Amber Delete Kit
-Steeda Low Profile Jacking Rails
-Steeda Subframe Alignment Kit
-JLT Oil Catch Can
-Sound Tube Delete
-Avalon King Ceramic Coating
-Emblems Plasti Dipped Black

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 231

@CanadianCruisin 3 года назад

What should the next mod be?? If this helped you out with your car please share the video and hit that subscribe button!

@Jack-b5o6r 3 года назад

Industrial defroster !

@CanadianCruisin 3 года назад

@@Jack-b5o6r cold enough already that I could use one 😂

@joshodin19 3 года назад

Boost!!

@CanadianCruisin 3 года назад

@@joshodin19 I need a lot more youtube subs for that one haha

@FYMM69 3 года назад

@@joshodin19 whipple 😆

@memo1975 3 месяца назад

This guy did his homework. Clearly not a hack job, well done and thanks for sharing

@jsauginas 3 года назад

Not sure if you noticed but you have a decent crack or slice in the sidewall of your front passenger side tire. I noticed it around 5 minutes 41 seconds of your video. Hitting that bump may have caused that.

@CanadianCruisin 3 года назад

That was from a guy at work getting to close with a pallet on a forklift lol. Ripped a good chunk off the sidewall. Tires will be finished after this season so figured leave it until the new rubber goes on

@diyonwoods9702 Год назад

I was riding to new Orleans and next thing you know. All my air went out my tire in my 5.0. I made it to a tire shop, it was a slash kind of hole in the sidewall man. Now I know one of those potholes(very notorious in Nola) may have caused that.

@TeeJayEastBeast 4 дня назад

@@diyonwoods9702 born and raised in Nola. Potholes are like the abyss out there 😂

@MikeFyxdt 3 года назад

Car looks great! The front wheel well looks so tight from how the camera shows it you’d guess there’s no way that you have clearance when the wheel is turned and you go over bumps. Mustang magic! Great place for your photo shoot btw. Cleanest loading dock I’ve ever seen!

@CanadianCruisin 3 года назад

Yeah the magic fitment pixies are on my side haha. That area is great for filming. Lots of new developments there so wide-open and not much traffic.

@MikeFyxdt 3 года назад

@@CanadianCruisin I need to find some new places to shoot! (Could also use some fitment pixies!)

@CanadianCruisin 3 года назад

@@MikeFyxdt a low convertible would look pretty good

@MikeFyxdt 3 года назад

@@CanadianCruisin agreed!

@jesusmunoz2017 5 месяцев назад

Stock height in the front i put 265-40-19 with the offset of 9” and in the back 295-40-19 with if the offset of 9.5”. The back is flush with the body in the front its a little tucked in but the set up is good

@stangedude5646 9 месяцев назад

I like my wheels a little under the frame of the car. You don't have to worry about crushing your fenders on a hard bump.

3 года назад

Inspirational! I don't like wheel gap on cars that have a very sleek silhouette such as the S550! Flush or damn close to it is what I am for and it seems like these springs will do the trick! Wicked looking pony, mate! Thing looks sinister! :D

@CanadianCruisin 3 года назад

Thank you😊 im trying to build it to look as good as it will run. No point in having a bunch of power if it doesnt look right :)

3 года назад

@@CanadianCruisin IKR!? I just bought a 2015 S550 a few months ago and loving the thing. I noticed your build list and noticed a lot of chassy braces. Do you have a video going over those? I know well of the stop the hop stuff and plan to lock up the rear with BMR's full suite of options but I'm not familiar with the front K member bracing etc. Care to elaborate?

@CanadianCruisin 3 года назад

@ yeah I have videos on all the suspension stuff so far. The K brace just stiffens up the front. Makes it a little more solid and responsive in the corners at higher speeds. Kinda helps keep it planted

3 года назад

@@CanadianCruisin and the NVH is unchanged or simply not noticable?

@CanadianCruisin 3 года назад

@ you bet. It rides as smooth as stock still. Only difference is the braces hang lower so you have to be careful over speed bumps and stuff. Other than that no issues

@kopan14 Месяц назад

maybe not good for daily drives nd long roadtrips ? I think some hard bumps would destroy both front and rear fairings fairly quickly

@alanb6196 3 года назад

Jesus H. Porkrind!!! That sidewall at 5:42......

@CanadianCruisin 3 года назад

That's what happens when a forklift gets to close lol.

@fstgatotv 3 года назад

Man great job the car gets better all the time. Super stance 💪💪💯💯

@CanadianCruisin 3 года назад

Thanks you😊

@joshodin19 3 года назад

The car is coming along!! I like it alot!

@CanadianCruisin 3 года назад

Thank you. Got a few more things planned

@trbstang 3 года назад

Looks really good! Almost perfect. 😉 When I eventually lower my 16 GT PP, I'll definitely keep these springs in mind. I also have spacers on mine, 25mm front and 20mm rear. I tried the 25mm in the rear and it was a bit too much for me. Just adding the spacers makes such a difference! Thanks for showing us the details on your car and I'll be looking forward to more! Oh, and I've run a square setup on mine for a while, 9.5 wheels and 275s. They should fit in the front I would think easily.

@CanadianCruisin 3 года назад

Thank you. Glad you enjoy the videos. Nice thing with the s550 is there are so many options out there and they all look so good. It's a hard choice to pick one haha

@tatsuhirosatou5513 Год назад

This comment is saving me a lot of work I'm going square because I'm doing a handling focused track build instead of a drag build

@durstroyer3924 3 месяца назад

That front right tire sidewall look pretty mangled.

@Jack-b5o6r 3 года назад

The stance of your car is awesome !

@CanadianCruisin 3 года назад

Thank you 🔥

@JAG6.7 3 года назад

It’s looks way better in person don’t get me wrong the stang sits very good on the video.

@sirsams22 2 месяца назад

What % is the tint, bro clean ride

@batman-telephoneman5479 3 года назад

Nice car. Anyone notice tho... How messy the mustang and camaro engine bay are? Compare to a 392. No wires and crap all over the place.

@CanadianCruisin 3 года назад

I don't get why they can't hide some of the stuff a little better

@corradomoncada591 3 года назад

Do you have the exhaust done on her aswell? From Ontario with a 2020 pp1 looking to lower and put either a borla or corsa catback. I have the active exhaust and am a bit hesitant. Any recommendations?!?! Ps. Great content I watch your video’s alot just because I can relate more being in Ontario!

@jeremy_yyds 2 года назад

Sick car man!!!!!!!!!! I have only one question: how did you solve the issue with the lugs being too long at the front for 25mm spacers? (because of the magneride suspension)

@CanadianCruisin 2 года назад

My car doesn't have the magneride. These style of spacers won't work with it because of the lugs like you say.

@jeremy_yyds 2 года назад

@@CanadianCruisin Thanks for letting me know. Keep content going man, I have been watching your channel for a long time. Even bought the Nexen winter tire based on your review; they are fantastic tires. Thanks again!

@CanadianCruisin 2 года назад

@@jeremy_yyds awesome thank you. We got some snow here today but I haven't had time to swap the tires yet haha

@g04tn4d0 2 года назад

**me, enjoying the video and a drink** "i did have the car airborne at one time..." **spits drink all over keyboard**

@CanadianCruisin 2 года назад

Lmao. Note to self check the road before opening her up

@carmob7499 3 года назад

Lookin sick bro !! we can't wait to put our Steeda springs on Ruby ..

@CanadianCruisin 3 года назад

I dunno how I missed this comment. Ruby will look great when she's lowered

@BM713 Год назад

That is the perfect fitment and stance. The exactly clean and simply look I’m going to be aiming for! Thank you!

@wade_debo 3 года назад

Looks good ! Love it keep up the good videos !

@CanadianCruisin 3 года назад

Thank you and thanks for watching 😊

@mikehoncho4948 9 месяцев назад

Nice gash in the front sidewall 😂

@malcolmkennedy652 3 года назад

I would have went 20mm in the rear, 25mm just stick out a lot. But that's me. Also would have went maybe .75 of an IN the the rear to give a tad more rake for the front. Again just me, the car does look super dope tho.

@CanadianCruisin 3 года назад

Thank you. I might have to switch it up a bit whenever I decide on some new wheels

@malcolmkennedy652 3 года назад

@@CanadianCruisin American Muscle makes the exact same style replica wheel but in 20". They look dope.

@CanadianCruisin 3 года назад

@@malcolmkennedy652 wheels are so hard to choose. I just need 20k and ill have a set for every other week 😆

@Ponyo3816 3 года назад

With the PP1. I'm just waiting to buy the FP X springs for the rear. All that she really needs.

@CanadianCruisin 3 года назад

Yeah they don't need much to make them sit well thats for sure

@Ponyo3816 3 года назад

@@CanadianCruisin Plus getting my 1/2 high torque impact for a steal at HD. Finally have the tools to do the work. Building up my kit for track days at Laguna Seca. It's in my backyard. Like literally my backyard. lol

@CanadianCruisin 3 года назад

@@Ponyo3816 im jealous. We have 1 track here that's like a 4hr drive away lol. And then our dragstrip is about 40 minutes but its been closed this whole year now. I need to invest in some power tools one day

@Ponyo3816 3 года назад

@@CanadianCruisin That's my hobby at this point. Building my track day pack so I'm ready to go when i finish up a few more credit cards and student loans on their tale end.

@CanadianCruisin 3 года назад

@@Ponyo3816 im paying down the car and then a lot more fun things will be coming to the channel. Im going to have to track it one day and see how I do lol

@vocallotus1150 3 месяца назад

Steeda progresssive sports springs

@JAG6.7 3 года назад

I really should put 20mm spacers on my 25 on the rear are hit n miss at times

@CanadianCruisin 3 года назад

My wheels are different so they fit. Yours the extra 5mm would probably help a lot

@howardlee7216 3 года назад

Your car looks great.

@CanadianCruisin 3 года назад

Thank you!

@JR007x 3 года назад

10/10 all day!

@CanadianCruisin 3 года назад

Thanks man

@clay1022 3 года назад

What good struts do u have, and, do u recommend them ? Thanks! ps. really enjoy ur videos! great content!

@CanadianCruisin 3 года назад

The shocks and struts are just the stock ones that came on the car. Ill be switching to steeda adjustable ones eventually

@clay1022 3 года назад

I'm sorry. Meant to ask what hood struts are u using, and, would you recommend them ? I wanna get rid of the prop rod that holds up the hood, but, have heard there's alotta cheap junk hood struts on the narket. Thanks

@CanadianCruisin 3 года назад

@@clay1022 They are the Ford Performance struts. So far they are working like new still.

@JonniTwstt 2 года назад

You think i could run this setup with 19x10 wheel in the front? With 25mm spacers?

@dvpawlowski Год назад

just installed steeda progressives on my brothers 19 gt pp1, same inch (25mm) spacers and same stock wheels 2 weeks ago. his car sits just as low and he hasnt even driven it yet. my 18 is has bc coils waiting to be put on along with a few other things in the next few weeks. i will try to remember to record lol

@CanadianCruisin Год назад

I still think these give the stock wheel setup the best look for sure.

@dvpawlowski Год назад

@@CanadianCruisin I’m gonna be aiming for almost that exact height, I just wanted to do something a little more adjustable than the vogtlands and koni’s on my previous fusion. It handled like a train after that, rear way, bushings, and going from a 235 to a 265. But it was a daily. The mustang is only out when the snow is gone :/

@sickactor 2 года назад

Can you drop a link to your friends white mustang with magneride to see his stance? Im trying to find it. Thanks

@CanadianCruisin 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--JuzXn0_sPI.html

@FYMM69 3 года назад

Any regrets having the black paint ?? Nothing sexier than black and granted I ordered race red but blacks so damn hard to keep clean

@daleknapp7127 3 года назад

I have a Mustang that is identical to yours. 2019 Shadow black PP1. I’ve done a few simple mods like the lens tint,Steeda dry air filter replacement, resonator delete with a Steeda H pipe,LED interior bulbs,LED rear marker lights,JLT catch can,window tint,low profile jacking rails,I’ve got the 25 mm spacers all around with the black lugs but don’t have the Steeda springs just yet. I really like the lowered look of your car but I’ve heard they eventually start making noises so I’ve held off. You’ve had no noise issues whatsoever??

@CanadianCruisin 3 года назад

Awesome. Did you feel any difference with the filter change? So far no noise but I've heard the same thing. I will keep you posted if it starts acting up

@daleknapp7127 3 года назад

@@CanadianCruisin I can’t say that I feel any difference, although they claim there is roughly a 3-5 HP gain. Believe it or not I only have 1450 miles on the car and I bought it new in April of this year. Obviously it’s a weekend warrior and sometimes it only gets out 1 weekend a month. Need to drive it more!! I’d like to put more performance mods on the car but really don’t want to throw away the warranty just yet. Oh yea, I also have a speedform throttle controller on the car which I REALLY like! It’s highly adjustable and gets rid of any lag!

@CanadianCruisin 3 года назад

@@daleknapp7127 id say I would buy a car for the weekends but I dont have that self control haha. Id be out there everyday. Im tuning my car soon and still debating to keep the stock airbox or go with a cold air system

@daleknapp7127 3 года назад

@@CanadianCruisin from what I’ve researched the stock air boxes really do a good job and there is minimal gains if any at all from CAI. I see a lot of people saying their AIT’s are actually hotter than with a closed system. 🤷‍♂️ I do believe mine breathes better with the aftermarket filter though.

@CanadianCruisin 3 года назад

@@daleknapp7127 yeah I've read the same. They just look so good under there

@nickgallichan9750 Год назад

When you did the lowering springs did you upgrade the camberbolts or just run the stock ones? Some say you'll need them to get back into spec and some say it's fine. Just curious so I don't have to take it apart/align it twice lol

@CanadianCruisin Год назад

I just did springs and the shop I went to was able to get it close enough not to wear the tires unevenly

@nickgallichan9750 Год назад

@@CanadianCruisin Beauty, thanks brother I appreciate it

@CanadianCruisin Год назад

@@nickgallichan9750 no problem

@nunziorose1749 3 года назад

Spacers are illegal in Victoria Australia 😣

@CanadianCruisin 3 года назад

Really. I don't really like using them but until I finally get a new set of wheels there the next best thing

@l3gend2you5 2 года назад

You guys think a 1 inch poke with the back wheel will work with air suspension

@XxROCKSTARxX3 2 года назад

Does it scrape going over bumps? Where I work we have a couple bumps, only reason why mine is still stock height..

@CanadianCruisin 2 года назад

Never. My complex had a ton of speedbumps and never hit

@gilbertmontoya3005 2 года назад

Would it work with 305 30 19 rear with one inch lowering and front with 275 30 19 with 1.25in lowering?

@philthypony 3 года назад

So I just bought a 2020 GT and want to lower it come spring but was concerned with how it'll ride mainly in front, my list car i had Eibach Sportine springs in it and it felt/sounded like my struts were thing to blow right thru the hood at times. I was going to go with coilovers but if I can save bit get decent ride with just springs then cool i can put the saved money towards other parts, just wanted to find out if it rides rough at all with just lowering it 1.5" or whatever it drops be nice to just have no gap in fender wells also. One other thing I see you have 25mm spacers did they bring the tires out past the fender edge at all, I want my tires to sit flush with edge of fenders was told 20mm spacers would like to just buy once not have to screw around so be cool to know what you suggest for factory wheels to sit flush.

@CanadianCruisin 3 года назад

The eibachs are a harsher ride for for sure. These steeda ones ride as smooth as factory you just gain some more stability around corners and hard launches. So far no noise or bottoming out at all. As for the spacers they do stick out just slightly in the rear but the front is flush. So I'd maybe go with the 20mm in the back if that's the look you want to get. Thanks for watching:)

@philthypony 3 года назад

@@CanadianCruisin thanks for that info I just posted this question about suspension to do for what reasons etc. I think I'm going to just lower it with springs few people I know say they work fine in s550, I mainly just want to get rid of that gap the famous space between top of tire and fenders bottom.

@CanadianCruisin 3 года назад

@@philthypony you'll be happy with how just lowering it can make a huge difference. No need for all the rest unless your really going to use it to its potential a lot.

@philthypony 3 года назад

@@CanadianCruisin okay appreciate the info I've heard from couple buddies with lowered s550s that said springs work fine, I guess I'll just get some springs for it and go from their I can put money to other parts of the car saved from not getting airride. Lol

@philthypony 3 года назад

@@CanadianCruisin awesome appreciate the info.

@joseprado3492 3 года назад

Hello, I'm kind of ignorant when it comes to the new mustangs, how can I tell if my 2020 gt came with magna ride?

@CanadianCruisin 3 года назад

If you look there should be a wire connected to the shocks

@tatsuhirosatou5513 Год назад

NonPP s550s have 235s all the way around

@lobbyrobby 2 года назад

I have a 2020 GT pp1. In the future I want to throw on a set of bronze wheels. I'm thinking about running a squared setup tho so I can rotate them. It's confusing to what will fit and look good. With these 25mm spacers you didn't need to trim your factory studs, right. I hear with 20mm spacers the factory studs need to be trimmed.

@CanadianCruisin 2 года назад

As long as the offset works a square setup should fit fine

@george4u1960 3 года назад

Any other parts. Any other problems since you lowered your car with your suspension.

@CanadianCruisin 3 года назад

I havent added anymore suspension stuff quite yet. So far it's all good still. No issues :)

@coach_t727 2 года назад

beautiful bro!

@CanadianCruisin 2 года назад

Thank you

@khris1107 2 года назад

Are you using camber bolts? What camber are you running? I am asking you that because people say that camber can't be adjusted.

@CanadianCruisin 2 года назад

No bolts or plates on here. I don't know the exact numbers anymore but they got it pretty close to stock. No uneven wear on the tires or anything.

@FYMM69 3 года назад

With that tight of clearance how rough does the car ride with these lowering springs ?? Sharp ride btw

@CanadianCruisin 3 года назад

It rides like stock. Feels the same just more planted around corners

@hoonage5 2 года назад

How chipped is your paint getting on your rear fenders? Mine has all these very small chips and am now moving the wheels back in a little

@CanadianCruisin 2 года назад

Somehow mine don't seem to get any chips back there. Mostly on my hood and bumper

@Tejankang 3 года назад

I have 2 inch drop lowered springs that i want to get installed on my 2017 mustang convertible i have 275/35/r20 at front and 275/40/R20 at back so will it rub with the fender or not

@CanadianCruisin 3 года назад

If i go off of my stance and how much it was lowered i would say that 2 inch would probably rub. especially over any bumps

@jeffwahid5667 5 месяцев назад

Drop the link for the spacer bro

@ericolivera7789 2 года назад

I have a question and new to my 2020 mustang gt. It has the pp1 wheels and tires. What squared set up would be great for my car? What wheels would I have to get etc.?

@tacdriver911 2 года назад

I have the same brand tires but went up to 265 on front and 285 on rear. Running the same 25mm spacers too. I recently bought Eibach sport line lowering springs for a front and rear. 1.3 in the rear of 1.5 in the front. I’m worried because I went up and tire size plus the spacers I’ll have rubbing. What do you think?

@CanadianCruisin 2 года назад

It's not much of a size jump but the eibachs are pretty low. It would be tight for sure

@soflog1410 2 года назад

Did your setup work with the bigger tire setup after adding the Eibach Sport line lowering springs?

@Dude-tb8ry 3 года назад

How do you think the Steeda lowering springs would look with 285s on all 4?

@CanadianCruisin 3 года назад

The height should be the same. The only difference would be how the tires stick out depending on the offset of everything

@johnquintanilla4985 2 года назад

What percent are those tints ? Sick mustang !

@CanadianCruisin 2 года назад

Thank you. I have 5%rear and small side window and 45 on the doors

@johnquintanilla4985 2 года назад

@@CanadianCruisin im from Canada aswell , how much all the windows cost you ? I have a 17 gt all black and i wanna get rid of the fishbowl looking windows haha

@CanadianCruisin 2 года назад

@@johnquintanilla4985 it was 130 from a little shop near my house

@johnquintanilla4985 2 года назад

@@CanadianCruisin ohh thats fairly cheap!! And btw i just saw ur recent video and youre from British Columbia too!

@CanadianCruisin 2 года назад

@@johnquintanilla4985 you bet. I'm in langley

@jasonhahn6398 3 года назад

Did you add camber plates after the lowering springs?

@CanadianCruisin 3 года назад

No just the springs

@Crowdkiller8 Год назад

This crazy cause I tried putting 25mm spacers on the rear and they poke out way to much..

@CanadianCruisin Год назад

Stock wheels?

@Crowdkiller8 Год назад

@CanadianCruisin yes i have the same wheels I put 25mm.on the front and fits nice but on the rears they poke put way to much

@CanadianCruisin Год назад

@manuelwiedmaier4420 magneride? Only other thing I can think of other than alignment could be off

@Car_nage 3 года назад

What’s the inch drop is it 1 inch ? Sr performance springs ?

@CanadianCruisin 3 года назад

Steeda progressive sports. It's 1 inch rear and 1.25 front.

@mavstang4145 3 года назад

Thanks bud...im going to be getting the Steedas installed in the spring 👍 I'm in Ontario..how much am I looking to spend installed?

@CanadianCruisin 3 года назад

I installed my own but I've heard places are charging between 250-300 bucks for install. But that's just what I hear through friends so it could be out a bit. Then the springs are another 350 canadian.

@saldmairi 3 года назад

She looks mean 👍🏽 🔥

@CanadianCruisin 3 года назад

Thank you. More to come 🔥👍

@FYMM69 3 года назад

Ya brother that stance is ideal. My Ford dealer knows I want to do a bunch of mods to mine whenever I get it. Their suggesting the Ford Performance lowering springs which supposedly give it a 1” drop. I’m not sure what the difference might be between say Steeda sports and Ford Any regrets going to wheel spacers because I’ve thought about going to Weld wheels

@CanadianCruisin 3 года назад

I went with steeda because it was just slightly lower in the front than the rear but I've heard good things about Ford performance as well. Spacers have held up great. I don't even know they're on the car. Just make sure to get the good hub centric ones or they will vibrate a lot at higher speed.

@nature_labs 2 года назад

Hey buddy do you have a link for the 25mm spacers there are like 4 kits on their website I’m gonna probably go 255/40 19 with the spacers to make it flush.

@CanadianCruisin 2 года назад

www.cjponyparts.com/accelatec-wheel-spacer-kit-25mm-black-with-black-chrome-oe-style-bulge-lug-nuts-mustang-v6-2015-2017-ecoboost-gt-2015-2022/p/WAK9/

@nature_labs 2 года назад

@@CanadianCruisin did you buy Quantity of 2 or does it come with 4 in the set

@CanadianCruisin 2 года назад

@@nature_labs this one comes with all 4 plus the black lug nuts

@nature_labs 2 года назад

@@CanadianCruisin I just bought some RTR spec 7s I’m gonna stay 255 with the kit to help make it flush I also purchase some RTR tactical springs so let’s hope for the best!

@CanadianCruisin 2 года назад

@Zach Sullivan I just got some new wheels. Waiting on tires so hopefully they look good still

@johnnytran2629 3 года назад

How is the clearance when there is heavy snow?

@CanadianCruisin 3 года назад

Well im in Vancouver so we never get tons of snow but I've made it through a foot with no issues. As long as the plow goes through before they car it's fine.

@Vexifymh 5 месяцев назад

How do Ik if I have magna ride??

@dakota8029 Год назад

What is the offset on the wheels you have/had on there? Thanks!

@johnnyjayy14 3 года назад

Will the car get some euro taillights?

@CanadianCruisin 3 года назад

It will eventually. To many things to save up for lol

@losnuevosmentadosmusic948 Год назад

How u make front spacers fit did u have to cut off the excess of the lug nut for the magneride suspension

@CanadianCruisin Год назад

Mine doesn't have magneride.

@sickactor 2 года назад

I have a 2020 GT PP1 on magneride. Im planning on buying rims 20x9+35 on 275/35 all around. I also plan on getting the steeda lowering springs to drop it 1 inch. Will it fit?

@CanadianCruisin 2 года назад

It should fit. Magneride sits a little higher than my car so will leave some room

@sickactor 2 года назад

@@CanadianCruisin If I add 30MM spacers in the front for the magneride and 25MM in the back, will they still fit?

@KandAshow Год назад

Do you scrape going into a driveway or over speed bumps now that you've lowered it?

@CanadianCruisin Год назад

Speed bumps there's no issue. Driveway depending how bad the slope is it hits the splitter if I went to fast but usually could make it in no problem

@KandAshow Год назад

@@CanadianCruisin Thanks! I've been thinking about getting some for mine. My driveway is super steep but I can get in and out of it just fine with the stock springs if I pull in at a super angle. I think I'll have to go do some measurements... Lol.

@vocallotus1150 Год назад

Did you get the steeda spacers ?

@CanadianCruisin Год назад

No the spacers were the 4 pack off of cjponyparts. 25mm

@danielzamudio9658 3 года назад

What spoiler is that ?

@CanadianCruisin 3 года назад

Stock spoiler. It's the pp1 wing

@ghx4368 3 года назад

Hi, is this lowering spring model 'Eibach E10-35-029-07-22 - Pro-Kit Performance Spring'? I am also going to install Eibach lowering spring. And where did you get it?

@CanadianCruisin 3 года назад

No its the steeda progressive springs. Eibach is lower

@ghx4368 3 года назад

@@CanadianCruisin ohhhh, thx. I am planning to lower my car too XD.

@CanadianCruisin 3 года назад

@@ghx4368 you will be happy with either spring I think 💪

@nokiaeight3303 2 года назад

Can anyone tell me what offset the stock wheels are. Thanks

@chrissanchez9218 2 года назад

I need help I went to go look at a mustang performance pack 1 and noticed the front inner front tires wearing out and the rest of tire is literally new all tread it’s a 2020 is it a normal thing?

@CanadianCruisin 2 года назад

The alignment is way off then

@chrissanchez9218 2 года назад

@@CanadianCruisin yes just talked to them they said they’ll get me new tires and alignment for free

@CanadianCruisin 2 года назад

@@chrissanchez9218 that's awesome. Good thing you checked it out

@juanacuna9031 2 года назад

Is that a 1" Drop in front and back?

@CanadianCruisin 2 года назад

1 in the back and 1.25 up front

@franklindelacruzx9199 Год назад

Those are the stock rims ?

@CanadianCruisin Год назад

Yes they're the pp1 rims

@jennp6111 3 года назад

What if it wants to rub and your Denying it that pleasure

@CanadianCruisin 3 года назад

To bad for it lol

@sharoonanwar1178 2 года назад

How low is ur car man?

@CanadianCruisin 2 года назад

Lowered an in the back and 1.25 up front

@fran914 2 года назад

Did you get any camber from the springs ?

@CanadianCruisin 2 года назад

Very little. I was able to align it without any camber plates or bolts

@fran914 2 года назад

@@CanadianCruisindid a tire shop align it for you without anything?

@CanadianCruisin 2 года назад

@@fran914 yes I went to oktire the last time

@fran914 2 года назад

@@CanadianCruisin would you recommend the steeda springs or eibach springs ?

@fran914 2 года назад

@@CanadianCruisin kinda of in the middle of which ones to get

@sharoonanwar1178 3 года назад

How low is ur car

@CanadianCruisin 3 года назад

It is dropped 1 inch on the back and 1.125 in the front

@CALISPEC1 3 года назад

I went with the Steeda 25mm spacer and springs on my magnaride car and it’s perfect 👌

@CanadianCruisin 3 года назад

Nice. Be careful with spacers with magneride though. It looks like they work but the front tires are actually not against the hub. I have a video on it when we went to put them on my friends car.

@CALISPEC1 3 года назад

@@CanadianCruisin just went and checked and your correct, they like about a mm front being flush against the spacer! Looks like I’ll need to mill the reliefs in my front wheels slightly. Good info dude🤟 Note; my car is a 2020 so it doesn’t appear that they’ve changed the stud lengths from the 18-19 cars.

@CanadianCruisin 3 года назад

@@CALISPEC1 i don't know the reason but they used the gt350 hub on the magneride cars and the bolts are just slightly to long. Glad you checked it out. Some people just shave down the bolts a bit but its really up to you in the end.

@CALISPEC1 3 года назад

@@CanadianCruisin I appreciate the heads up to check it out, I had no idea. I’ve heard some “creaking” from time to time when the wheel is at full lock backing out of the driveway but I just chalked it up suspension noise from the lowering springs. I now suspect it’s from the studs binding against the wheel reliefs.

@CanadianCruisin 3 года назад

@@CALISPEC1 no worries. It could be the studs scrapping a little like you said.

@fordmustang5856 8 месяцев назад

Lame and looks too much like stock rims

@CanadianCruisin 8 месяцев назад

They are the stock rims🤡

@JAG6.7 3 года назад

1st

@CanadianCruisin 3 года назад

🔥🔥

@Idgafboutyofeelins 2 года назад

Howdy! I’m from TX! I’ve driven a truck ever since I turned 16 and I just now got a Mustang so I’m new. Did you ever get Rear camber arms? I just got my 2019 lowered this week and he said pretty soon he suggests getting a set. He said it’s not a huge issue but it will wear out the hubs and cause tire wear after a while, faster than normal. He showed me the set he got for his car and I saw it in person so I feel I can trust he knows what he’s talking about, but you never know with mechanics.

@TunefullyOG 18 дней назад

Not necessary. I know this is 2 years old but for anyone in the future these cars at most for any street driven car camber bolts are needed for the rear. That's coilover low though. Our control arms are more than fine unless you wanna go tubular.

@WiggleG69 2 года назад

What brand are those rims I’ve been looking for my car

@CanadianCruisin 2 года назад

They're the stock performance pack wheels from Ford.

@MrSlickmonster6973 3 года назад

I have a 2020 gt. It has 20" wheels. Will these springs work on it? Ir would it be too low? I also have the 25mm spacers.

@CanadianCruisin 3 года назад

What sidewall is on the 20s. As long as the overall height is the same it should work. You'll gain an inch in the rim bit lose it in the sidewall

@MrSlickmonster6973 3 года назад

@@CanadianCruisin my tire size is 265/35R20

@CanadianCruisin 3 года назад

@@MrSlickmonster6973 it should work still then. I think the stance of the car between to 19s and 20s are the same so it should be able to drop the same amount

@MrSlickmonster6973 2 года назад

What size tire do you have???

@MrSlickmonster6973 2 года назад

How wide are the wheels???