How I Turned an Octagonal bowl. FOUR WAYS' PROJECT May 1st 2024 Woodturning with Sam Angelo

Подписаться 70 тыс.

Просмотров 7 тыс.

50% 1

May 1 Four Ways to Turn Project-2024
In this installment of the four ways to turn project, Sam turns an octagonal bowl-- much of the work is done off the lathe with a router. This might be considered more of a woodworking project but contains some interesting elements for joining wood turning and woodworking ideas.
Find the chapter time codes below:
Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com
Please watch the other three videos by clicking the links below:
Tomislav Tomasic • Hexagon plate with pop...
Mike Peace • Crafting a Unique Wood...
Richard Raffan • Richard Raffan turns a...
Please subscribe to my new channel: learn2turnwithsam
/ @samangeloturns
Thanks for watching my videos-
Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com
Please find my work on the following sites www.wyomingwoodturner.com
ETSY www.etsy.com/shop/wyomingwood...
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Look • The Robust American Be...
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo • Robust Scout lathe Tou...
Just click on the time and jump to the desired topic
Chapter time Codes:
00:00 Introduction
00:48 The Project explained
02:07 Designing the Octagon
03:12 Cutting the corners square
04:12 Turning at the lathe
05:47 Forming the expansion recess
07:05 Shaping the bottom of the piece
09:03 More on design
12:04 Setting up for the router
13:32 Routing the project
16:49 Back to the Lathe
18:47 Turning the bowl
21:42 sanding
22:54 Conclusion

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@alanfarnworth2802 24 дня назад

What I love about the 4 ways videos is how different they all are. This was really interesting.

@kenvasko2285 27 дней назад

It looked like a tough challenge. You always push the envelope. Thanks for the inspiration.

@DavidBird-uu8km 28 дней назад

Very nice, Another great 4 way video. Off to see the other 3.

@MarklTucson 29 дней назад

Interesting design and approach. Quite unique. Your's is the second of the four I've watched; now off to watch Richard Raffan and Mike Peace.

@jackthompson5092 27 дней назад

Very nice Sam.

@jorisdemoel3821 29 дней назад

Very nice piece and some interesting techniques to get there. Many thanks!

@tomislavtomasicwoodturning 29 дней назад

So much options and I love outside the box thinking Sam,I think you have inspired many with this idea....

@WYOMINGWOODTURNER 28 дней назад

I’m just an old Woodworker at heart Thank you very much, Sam

@SpunbyGreenJeans 29 дней назад

Looks great! Thanks for sharing.

@davidmorgan7522 11 дней назад

Nice design Sam! I like that it's turned as well as worked. Very interesting to watch you do this one. Take care, Dave

@WYOMINGWOODTURNER 10 дней назад

I'm just an old woodworker 😁 Sam

@garthkeck2003 28 дней назад

I like that design. Thanks

@valeriehenschel1590 Месяц назад

Very different, Sam! See you in Portland, I hope!

@gregdownunderinOz 26 дней назад

Thanks Sam, A helluva lot of design went into this. Certainly shows up well. I probably wouldn’t do something like this due to the design and time involved. I love wood turning not woodwork.

@mac44mag 29 дней назад

Great video, Sam! I learn something every time I watch one. Go, Bobcats!! (Class of 69)

@glennnord2605 Месяц назад

Thank you Sam for sharing this project , it looks like it 's got some depth to it .

@RichardRaffanwoodturning Месяц назад

This is an idea worth pursuing, Sam. There should be some interesting facets-to-round inside the bowl, especially if you can start turning on longer chamfers.

@WYOMINGWOODTURNER 29 дней назад

Thanks, Richard.... I sometimes go overboard with my ideas. And this might be one of them. But it was fun doing it a little different.-but yes, lots of possibilities for variations on this. Also watched your video and you were plates are very well designed.. Sam

@oldgeezer1746 29 дней назад

Very challenging piece. My first thought was this was a glue up. Amazing that it was all from a single block. BTW, your dust control on the chop saw seems to work well.

@glencrandall7051 Месяц назад

First off, I like it. Even though a lot of the work is with a router and not turned it is still quite nice. The transition from routing the octagon to the round interior is quite interesting. Also the transition from octagon to round on the exterior is very nice. Excellent detail on the top face too. I think the piece of cherry you selected is the perfect piece for this project. Thank you for sharing. Have a great day and stay safe.🙂🙂

@fallentreewoodcrafts 29 дней назад

Thankyou, gentlemen, for another four ways video. This ongoing series really helps stimulate creativity in my own turning. After watching all four, and noting differences and different techniques, I have decided That I will try a Walnut bowl with and pentagon edge. Wish me luck.