Тёмный

How Install Coilovers on 11th Gen Civic 2022 - DIY Instructional Step by Step - Rev9 

Garage Built Hondas
Подписаться 95 тыс.
Просмотров 16 тыс.
50% 1

My Favorite Products
Wheel Bearing Tool - amzn.to/33IplZZ
Milwaukee Ratchet -amzn.to/3EtpNJp
Jack Stands - amzn.to/3lvA5A2
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFF
Decals available for purchase here - garagebuilthon...
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@McDzy
@McDzy Год назад
not sure why im watching.. i dont even have an 11th gen... just great content thats why im watching, as usual hahaha
@McDzy
@McDzy Год назад
@lalalal8111 im curious as to why?? just wondering
@notorioussouljur
@notorioussouljur 11 месяцев назад
lol same
@EsvinOrtiz-kp3fg
@EsvinOrtiz-kp3fg 5 месяцев назад
Hey man I have a question so my sway bar link keeps snapping and breaking apart any chance you know why?
@CaptainTexas92
@CaptainTexas92 Год назад
The stock wheels are sick on the civic. Might be the first generation I wouldn’t bother changing. Width would be the only issue but I’m sure some wider replica versions are out there.
@FATmenDRIVEtrucks
@FATmenDRIVEtrucks Год назад
Could go more sticky tire and spacer if you want better fitment
@pedrocotto260
@pedrocotto260 Год назад
I put rev9’s on my 10th gen accord and then mmm shits lasted a week
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Lame.
@The_Redkween
@The_Redkween Год назад
That looked like a painful job, Jon. Having to grind the cups makes me wonder what the hell Rev9 was thinking when they designed these coils.
@juniorhernandez6476
@juniorhernandez6476 4 месяца назад
Dam, that actually looks killer man ! Finally, one that isn't slammed and cambered out! Now I wanna do this to my honda lol
@Ballixstic
@Ballixstic Месяц назад
Will BC Racing Coilovers from a 10th gen touring sedan (non-si) fit on a 11th gen sedan touring (non-si) ??? it looks like it would? just asking because i have old parts from 10th gen and im thinking about buying a 11th gen and seeing if i can install 10th parts to an 11th gen! thanks!
@daleispale420
@daleispale420 26 дней назад
2:44 instead of removing the knuckle here. I typically just use a jack and a 2x4 and I jack up the coilover and smack it to one direction to get it out of the knuckle. - I know it’s a little sketchy but it’s so much easier then removing the knuckle
@mutantboy8888
@mutantboy8888 5 месяцев назад
Those wheels are awesome! 20" Desmonds? I dont have access to a grinder, so I might have to leave the install to a pro...
@GarageBuiltHondas
@GarageBuiltHondas 4 месяца назад
Thanks! They're Rota Slipstreams actually.
@robbisSMACKD
@robbisSMACKD 3 месяца назад
Hey man! This video is REALLY helpful! I was attempting my 3rd coilover install on my 23 crv but got damn I couldn’t figure out what else to take off for clearance to remove the strut, AXLE DUH I was 1 BOLT away lmaooo. Put my stocks back on, today I did the rear, tomorrow I’ll tackle the front, appreciate you!
@sammymorales-b8z
@sammymorales-b8z 25 дней назад
installing mine today, lots of grinding was needed for front coils 💆‍♂️
@Toycoma
@Toycoma Год назад
Not a bad looking car but man, is that a big as a 2000 accord.... I hate that auto manufactures keep making everything bigger and bigger. Then have to introduce a new model that's as small as the original offering that is now to big.
@KMFDM781
@KMFDM781 Год назад
Welcome to the nightmare that is VW-like suspensions. The fronts suck. My MK6 and MK8 GTIs have the same style. I have a set of springs for the mk8 that have been collecting dust in the garage because they're such a pain to install. Also, on the rear...threaded shock and threaded spring perch is meant for setting correct preload for the rear suspension. Use the spring perch to adjust the ride height with the weight of the car on it, then thread the shock to match the ride height.
@COU51N.Kyle.
@COU51N.Kyle. Год назад
love the white on red and the drop!
@Ayyjaxx
@Ayyjaxx 3 месяца назад
I know this is an old video but I'm going to guess that sleeve is for an SI and not a sport
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
Maybe? I have no idea. They worked perfectly fine up until last week when I installed some D2's onto the car.
@joaocerqueira7194
@joaocerqueira7194 3 месяца назад
do you think 1 inch spacers would look good with these coilovers?
@GarageBuiltHondas
@GarageBuiltHondas 3 месяца назад
I don't think the coilovers matter. Depends on the wheel width and offset and tire size that you want to use.
@whoareyou56101
@whoareyou56101 Год назад
Will need this for installing D2 springs. I havent worked on any car before so this is my first time ever. Hope its the same process and steps.
@GavinCacciotti
@GavinCacciotti 7 месяцев назад
With installing springs, you have to take apart the factory strut which is a lot more annoying and sketchy sometimes
@GavinCacciotti
@GavinCacciotti 7 месяцев назад
As with aftermarket coil overs, you just swap the entire assembly out which is way easier
@jayq.3751
@jayq.3751 4 месяца назад
Thank for the video. Somehow I was able to remove the front shocks without having to remove the axle and knuckle
@GarageBuiltHondas
@GarageBuiltHondas 4 месяца назад
Nice!
@edwardfmaf
@edwardfmaf Год назад
Hey, you don't happen to have the light wiring diagram for a '86 civic si do you? We haven't been able to find one anywhere!
@GarageBuiltHondas
@GarageBuiltHondas Год назад
No sorry
@Geo-Media
@Geo-Media 10 месяцев назад
Awesome content, do you work on ppls cars as well ? Curious cause Dizzy engines is no more and I need a trusted mechanic for some things I need done 😊
@GarageBuiltHondas
@GarageBuiltHondas 10 месяцев назад
I used to. Not anymore. Only my close friends cars I'll work on. I don't have time for "customer work" anymore now that I'm a parent.
@keeplearning4L
@keeplearning4L 6 месяцев назад
idk if you will see this but when i installed my coils, i separated the housing where that 17mm is by using a flat head. even a little bit of tension or force should allow you to have the coil slip right into the socket on knuckle. just some food for thought
@EsvinOrtiz-kp3fg
@EsvinOrtiz-kp3fg 5 месяцев назад
Hey man I have a question so my sway bar link keeps snapping and breaking apart any chance you know why?
@keeplearning4L
@keeplearning4L 5 месяцев назад
@@EsvinOrtiz-kp3fg wish i could give you some help but tbh i don’t know that much still learning a lot lol
@SSGKeo
@SSGKeo Год назад
will you make a ride quality video after its settled in?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
👍
@abubakarmohdhemily4599
@abubakarmohdhemily4599 Год назад
Ur lowered just nice bro...
@sean_balayan
@sean_balayan 4 месяца назад
Torque specs for the lower control arm bolt and the strut/knuckle bolt?
@jojo-cx4cn
@jojo-cx4cn 9 месяцев назад
the rear spring is wrongly installed. it should be an adjuster at the top.. 
@krakdaus5442
@krakdaus5442 Год назад
No SI trim? Sad
@darksolara6750
@darksolara6750 8 месяцев назад
looks fantastic!!!
@MGOD92
@MGOD92 Год назад
The whole video looked like struggled
@GarageBuiltHondas
@GarageBuiltHondas Год назад
This is everyday if you're ever working on a car.
@allana5930
@allana5930 Год назад
Yeah Honda lost me in the 90s .
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Lol
@teddiazjr.6223
@teddiazjr.6223 2 месяца назад
Another great video Good details and commentary
@BulliKid
@BulliKid Год назад
Is this car a stick shift?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
It's automatic
@BulliKid
@BulliKid Год назад
@@GarageBuiltHondas do they make these in stick at all in regular sedan?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
I'm not sure.
@runespaze
@runespaze Год назад
@@BulliKid yes
@Rhadiqul
@Rhadiqul Год назад
Yeah idk why grinded that.... VW/Audi/ and even BMW use the tool to spread it open.
@GarageBuiltHondas
@GarageBuiltHondas Год назад
It doesn't seem correct to me. OEM slid in and out perfectly. In my opinion it should fit exactly the same as OEM.
@isaiahpeters6432
@isaiahpeters6432 Год назад
🔥🔥🔥😇😉🍻🍺
@Keny-Quintanilla
@Keny-Quintanilla 11 месяцев назад
Cool. Thank you.
@GarageBuiltHondas
@GarageBuiltHondas 11 месяцев назад
No problem!
@lugam_1890
@lugam_1890 Год назад
Can I get a link on where to get these exact ones please?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
I'm unsure. The owner of the car bought them online. Just Google shop them.
@estewar03
@estewar03 Год назад
On the rears, when you swapped out the top hats I'm 99% sure the rubber bushing underneath it is supposed to be moved to the new shock as well. 16:12 you can clearly see that there is an empty space without the bushing. This will leave the entire weight of the vehicle on just the shaft & aluminum top mount.
@GarageBuiltHondas
@GarageBuiltHondas Год назад
The Rev9 have the bumpstop under the protective sleeve already. Adding this would've meant the car rode around on 2 bumpstops and on the stops all the time.
@estewar03
@estewar03 Год назад
@GarageBuiltHondas but it's not a bump stop, it's part of the mounting. As you pointed out earlier on the bump stops are on the actual piston portion of the strut where it would do something. Like you mentioned in your reply, it would always rest on the upper mount like it's supposed to, because there is no suspension travel there so there wouldn't be movement 😉
@mexicalioverland5936
@mexicalioverland5936 11 месяцев назад
Can you share the measures from all 4 corners ?
@GarageBuiltHondas
@GarageBuiltHondas 11 месяцев назад
I can't. The car isn't mine, and I haven't seen the owner in person in 2 months. With coilovers you can lower it as low as the coilovers allow you to.
@darrenlau2778
@darrenlau2778 7 месяцев назад
Thanks for the detailed steps on the front. I have a 10th gen and am going to install springs and camber adjustable ball joints. Seperating the axle from the knuckle is necessary to remove the ball joint and makes removing the strut so much easier as well. Nice work 👍
@Keny-Quintanilla
@Keny-Quintanilla 11 месяцев назад
Did you get any warning lights on the dash after installing the coilovers.? Great video by the way.
@GarageBuiltHondas
@GarageBuiltHondas 11 месяцев назад
No, nothing at all.
@runespaze
@runespaze Год назад
These new civics just don’t have any appeal.. I chose the right time to go domestic
@The_Redkween
@The_Redkween Год назад
I like them. I didn’t like the previous “spaceship” generation.
@bussincheeks
@bussincheeks Год назад
How do you get access to the two 12mm nuts for bolts on the shocks in the rear? You have to go through tbe trunk or is it just the bolts going into the body and hold themselves in?
@GarageBuiltHondas
@GarageBuiltHondas Год назад
Just the way I did. From the bottom in the fender area. 2 bolts hold the shock on there.
Далее
OEM Airbox Mod | 2022-2024 Civic Sport / LX 2.0
11:24
ХОККЕЙНАЯ КЛЮШКА ИЗ БУДУЩЕГО?
00:29
How to Properly Set Up Coil-overs
13:48
Просмотров 165 тыс.
How to Install Coilovers in Your Car
16:45
Просмотров 4,3 млн
2022 Honda Civic SI Gets Silver's Coilovers
3:06
Просмотров 15 тыс.
Triton Conference 2024: Afternoon Session
3:37:31
Просмотров 1,5 тыс.