How much boost can I get with this BOOST CONTROLLER for my Mercedes-Benz C250?

Подписаться 107 тыс.

Просмотров 49 тыс.

50% 1

How I added more boost to a stock or aftermarket turbo on a Mercedes-Benz C250 with a M271 EVO engine using a Manual Boost Controller.
For more information please contact:
TORNADO TUNING
NARESH VIRKAR
WhatsApp: +85292106377 (preferred contact method)
Email: Newtongsm@gmail.com
Facebook:TornadoTuningInternational
Available for purchase
Here www.fonefunshop.com/tornado-t...
And Here www.c250tune.com/product_info....
How to install diverter valve
• Does a BLOW OFF valve ...
How to install a Boost gauge
• Video
Music Credit
RU-vid - "Palmtrees"
DISCLAIMER: This video was sponsored by Tornado Tuning. All views and opinions expressed in this video are of my own.
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@nickeygeorge-gx9jo 2 месяца назад

keep up thr great job you are doing teaching us all theys ricks ,love your work

@BACKYARD_DUMMIES 3 года назад

Nice job 👍 I just recently got a 2016 Mercedes C300 I will be doing these Mods, Awesome bro

@johncarr5554 4 года назад

Hey Flexx, dig your videos man. Have you done a GDI cleaning on your car?

@magicnoodle1735 2 года назад

Hey flexx, can’t seem to find your video with the boost gauge install. I have looked through your performance series playlist and still can’t find it

@sarahgrassi9648 4 года назад

You should dyno it. Make sure its tuned properly. It's so easy to get boost creep and you have to make sure your air fuel ratios r safe with a boosted motor. Granted I'm sure it can take it cause its Mercedes but this is their new motor so who knows

@YaleYouthHockey99 4 года назад

Hey Flex, After doing all the stuff u have done to your C250 do you know your overall specs, like HP and TQ

@TheAwesomeFossum 3 года назад

Asked him this before. Got left on read.. lmfao was probably not worth the amount of money poured into the vehicle.

@chickens366 3 года назад

@@TheAwesomeFossum it’s because he made a whole video on it dumbass

@TheFlexxGarage 3 года назад

@chickens366, yup. If people would actually watch each of my videos...they would know when I talked about it. Hahaha...it’s like people only watching fast and furious 8 and asking “where’s Brian?”

@Goblin-eh7yf 10 месяцев назад

Can you put the video online with the boost gauge install? As far as I can see it is private. Thanks

@beeasty7683 4 года назад

Good day from Australia. My daily is a 2011 E250. Same exact engine with your C250. I don’t have a boost gauge and I’m not sure if I wanna add one so for now I’ll rely on my OBDII reading. (I’ve read your opinion about its accuracy from one of the comments above but til I decide to add a boost gauge, I guess that’ll do) My questions are: 1. apart from a GFB blow-off valve (same as what you have on your C) and a drop in K&N filter, my engine is stock. If I follow your procedure from your video, fully close it by turning clockwise til tight and then turning counter clockwise 2 full turns. Will that give me enough extra boost to actually feel the difference and yet stay safe for my engine? 2. Instead of taking the clamp and pulling the stock hose, would there be a difference if I just cut the stock hose and attach the boost controller in between? Cheers!

@KevinWambugu123 4 года назад

U should put the car on a Dyno and see what it churns out..

@slowestamg 4 года назад

Kevin Wambugu SERIOUSLY!!! I'M SO CURIOUS

@chrish1850 4 года назад

Any concern with the screw on the boost controller backing out with engine vibration etc or is it in there pretty snug? Any way to ensure it doesnt move once adjusted? Essentially you can use any manual boost controller in the same fashion, but should buy a tornado tuning unit, right Flexx?

@maryowros5880 4 года назад

Hi flexx I tried to open the link for the install the boos gauge but it didn't open

@Pkdimmock Год назад

Hey. Do you what the pipe you pulled off is called. I got a boost regulator and was told to cut my existing pie in half to fit this in line but dont really want to do that. Want to add a piece incase I need to remove it for whatever reason. Thanks

@ponchoaag 2 года назад

Sound nice my problem is that my turbo is not working so y know why

@laieakana8360 29 дней назад

Hey flex I have a question man. I bought a cheap boost controller off eBay (Ik lol 1st mistake) and after I push 18-19psi it seems like my waste gate gets stuck because it hisses out air upon acceleration. Now when I turn off the car and turn it back on the issue goes away. When I take off the controller and put stock hoses on the issue never occurs, so my question is have you ever encountered an issue like mine before or the overboost check engine light turning on? Open to any thoughts brotha have a good one!

@juniorsheld0123 3 года назад

Flex I have ml550 2013 how can I add more boost to it and be on the safe zone at the same time please....

@arlozeki 4 года назад

Hi flex, i have E200 CGI that use the same engine as yours M271evo, I've install a boost gauge and it when max to 10psi. I've purchased the same gfb boost controller and turn counterclockwise 2 time and 5 time but my psi doesn't go any higher. Still the same 10psi max. Is there any suggestion or help? I've installed the exact same way as you did

@youngcloud2168 2 года назад

Aye dawg what happened to the boost gage video?

@kunimr2234 3 года назад

im from malaysia like this u video

@crunch6912 3 года назад

wontt the ECU over ride the manual control thinking something is wrong? This would make ECU programing for $2000 not worth it I never seen this on ny beznz before

@jzarz313 4 года назад

How can we see the boost gauge install vid?

@CriticalManimal 4 года назад

How about your A/F ratio? Better to run more rich than lean or you may start knocking.

@ericroper380 2 года назад

I know flex moved on to bigger things but you can push 22 psi safely if you do a wastegate upgrade the stock wastegate is trash and won’t hold the boost constantly

@diarfejzullahu9623 Год назад

Hello Eric, based on your comment I’m inferring that you installed a boost regulator yourself. How is it holding up now? Did you have any issues or did you have to lower the boost pressure?

@ericroper380 Год назад

@@diarfejzullahu9623 you would have to change the wastegate to a mamba wastegate so that you can turn the boost up the engine isn’t the issue it’s the wastegate and the stock Components

@CheckerLP1 2 года назад

Does it work for a om 651 engine? Biturbo diesel

@jaimemarun2841 3 года назад

Hello Alexander: Nice video. Have you installed a catch can oil in this car? Best regards

@TheFlexxGarage 3 года назад

No. Car was sold months ago.

@erikm.8593 4 года назад

Does this work on the 220/250 CDI ?

@sato730x 4 года назад

Will this mod work on an m270 gla250?

@srtmacmx4310 2 года назад

Bro what’s you horsepower to the wheels

@mrprolifik2522 4 года назад

will this work on a c300?

@DMONEY6191904 4 года назад

Just curious on all your adjustments you have made on your car, how much horsepower are you having now !?

@newtongsm 4 года назад

CERTIFIED HUSTLER I have dyno charts from hongkong Mainland china malasiya and Thailand can. Contact me

@ryusensai5954 2 года назад

Flexx o got c180 2012 so far I've put tornado air filter now ive ordered a silicone pipe from tornado is the turbo upgrade same fitting as a c250 on a c180

@ryusensai5954 2 года назад

What else can i do to the car to make it push out more bhp

@ericroper380 2 года назад

Yeah it should be

@BC2FITTY 2 года назад

@@ryusensai5954 downpipe with full exhaust , intercooler , throttle body adapter , wastegate , is a good start

@allanbongpinoyakoproud 4 года назад

Hello!Flexx Alexander Is it possible to change the engine of my 2004 coupe supercharge c200 kompressor into 2008 model Evo engine? Thanks

@newtongsm 4 года назад

Allan Bong possible check local shop who can do this

@papichulo9684 4 года назад

Will this mod work with the tornado tuning shift chip. You know the thing that helps it shift faster.

@TheFlexxGarage 4 года назад

Yes

@glenlee1693 4 года назад

Both the URLs on the "Available for purchase" that you provided don't work

@TheFlexxGarage 4 года назад

contact tornado tuning. Contact info should be in the description

@caioffurtado5520 3 года назад

I Just order one from ali express. I did try the url too...

@MugheesMohiuddin 6 месяцев назад

The engine and parts are all same on c180/200/250 cgi? Is there an easy way to remap 180 to 250?

@TheFlexxGarage 6 месяцев назад

You can reach out to my sponsors at Tornado Tuning. I believe they still offer a plug and play dongle to the OBD2 port that can remap the m271 engine for a stage 1 tune. Their contact info is usually in the video description. Or…you take the car to a shop that specializes in tuning and you have them custom tune the ecu.

@fakmenow 4 года назад

Probably not recommended to get this without a boost gauge?

@TheFlexxGarage 4 года назад

If I didn’t have a boost gauge and I followed this step by step, I might be fine but every car and ever install is different. If I had leaks there or somewhere else, or my cars tune was off, I’d run the risk of doing damage without a boost gauge.

@8997456 4 года назад

Hello Flexx will that mod work on a c180 with a 1.6 engine. Year 2012 cgi sedan, thank you. From Nicaragua

@TheFlexxGarage 4 года назад

We don't have that model in the U.S.You need to contact tornado tuning and ask them. Their contact info is in the video description.

@benz_enthusiast4814 4 года назад

Hey Flexx, I tried it on my C250 and shortly afterwards my car has a problem doing cold starts. It starts up sounding like it’s missing, ( it jumps around and feels like a cylinder is not firing), and the engine light comes on. After I let it warm up a bit and shut it off, (approximately 2 minutes or so), it starts up and runs just fine. I took it off and still does it at cold starts. My dealer says there was not enough power or pressure getting to the turbo, but when driving it runs good and hard. I also have the DV+ Blow-off valve and Turbo muffler delete as well. Did I do something wrong?

@markdowdy1631 2 года назад

hey did you ever fix this issue i am having it rn plz help

@BC2FITTY 2 года назад

Make sure you don't have a tear or any leaks in any of your hoses , check sparkplugs ,check your boost sensor and check to see that you installed it correctly

@TheFlexxGarage 2 года назад

If there’s a check engine light…then read the error code and it will tell you what the fault is. No point in wasting time guessing the issue. That’s what the check engine light is for. You probably either have a leak or you have the standard c250 camshaft adjuster issue unrelated to the mod. I made a separate video on that common issue.

@TsarOfRuss 4 года назад

Do a "Drive around at night, and drive with your shifter paddle" we want to hear the sound of ur car at night, we we want see the atmosphere, you know? stuffs like that ... or do a video showing us all the mods and the changes it has brough to the car, show us the before and did any mode on the car at all vs now

@fabriziofanale8317 4 года назад

Hi bro I have c class c 180 2012 I want know if the same part you put on your car can fit in my car thanks

@TheFlexxGarage 4 года назад

Don’t know. We don’t have a c180 in the US. You need to contact tornado tuning and ask them. Info in video description.

@TsarOfRuss 4 года назад

if it has a turbo, it should work

@beeasty7683 4 года назад

Mate ive done a lil digging. Now im more confused than before. Why dis you connect the boost control there instead of totally bypassing the stock/original boost control on your C250? So now you basically have 2 boost controls running your car?

@newtongsm 4 года назад

Beej AMG if you see this video properly we adding the boost controller we have not by pass anything

@TheFlexxGarage 4 года назад

Newer style cars still require the turbo boost controlled by the ECU using sensors. Installing the manual boost control inline will still use the ECU but trick the system to make more boost, safety. If I were to bypass the system completely, there’s a good chance the car will go into limp mode and/or run the risk of overboost without much protection.

@beeasty7683 4 года назад

Flexx Alexander thanks for that mate. Youre right. I did try to bypass the stock boost control completely. Like yours, was running 15-16psi stock. After bypassing the system, i didnt reach 19psi until approximately 15 counter clockwise turns on the adjustment. I can hear air leaking from the boost control when i hit the trottle as i reckon its almost fully open.

@TheFlexxGarage 4 года назад

15 counter turns????!!!!! Why so much? Mine was like 2 complete counter turns.

@beeasty7683 4 года назад

Flexx Alexander since i bypass the stock booster. I cant get the boost pressure i wanted which was 19psi til about 16 counter turns. Then i did the same install as you did and 1 1/2 turns i reached 19psi but im running a bit too rich i reckon. I uninstalled the booster for now. Ill prolly get a tune when i reinstall it. Idk.

@seansherry7249 3 года назад

Max Boost I see on W204 2010 C 250 is 10 PSI ?????

@TheFlexxGarage 3 года назад

we don't have 2010 C250 here in the U.S. Only 2012-2015 C250 with the M271 Evo engine.

@JuanPerez-yq1hp 4 года назад

Hey Flexx, you think those OBDII dongles are accurate reading boost?

@TheFlexxGarage 4 года назад

No. A vacuum line is physically connected to the system and is much better and more accurate. But...that’s just my opinion.

@ibezF 3 месяца назад

Where can I find the gauge install video?

@TheFlexxGarage 3 месяца назад

I took it down cause people didn’t like where I tapped the line for the gauge. They said I should tap it after the throttle body where the intake manifold is.

@Pkdimmock 10 месяцев назад

Have you done one of these on your c300? I've got one but looks very different to the c250 setup

@TheFlexxGarage 10 месяцев назад

C300 is not a turbo engine. There’s no boost to control.

@Pkdimmock 10 месяцев назад

@TheFlexxGarage But you got a whole series of upgraded turbo parts for your c300🤔 My c200 has s turbo

@TheFlexxGarage 10 месяцев назад

No I don’t. My titles literally say c250 when I do performance mods. I own a white c300 but that didn’t get any performance upgrades. Plus I’m in the US. I don’t know what a c200 is. We only have a c250, c300, and c63 in this body style.

@Pkdimmock 10 месяцев назад

@TheFlexxGarage You've added a blow off valve, a Turbo charge pipe, a turbo inlet pipe, a upgraded intercooler, a carbon air filter and intake all to the white C300. Am I missing something coz its got a turbo on it.

@TheFlexxGarage 10 месяцев назад

No i didn’t. I literally just told you my c250 is the turbo engine with the mods and the c300 white I haven’t done anything too because it’s a 6cyl. And secondly…look at the thumbnail to the mod videos. Do you see a white c300? Lol

@atHashtagx 3 года назад

This Actually Does Not Add More Boost This Simply Only Adjust The Amount Of Boost In The Turbo

@laithellabban 3 года назад

No shit bro

@anthonyzimmerly1984 Год назад

Tornado tuning doesnt even have these

@TheFlexxGarage Год назад

Did you message them like i mentioned in the video description? The only way to know is to message them directly. I never mention their website (if you went there) in my videos cause it doesn’t have everything they sell.