No video :(

How much horsepower gain? JLT Cold Air Intake & 87MM Throttle Body DYNO on a Scatpack/SRT/392 Hemi

Подписаться 17 тыс.

Просмотров 19 тыс.

50% 1

JLT Cold Air Intake & 87MM Throttle Body before/after DYNO Results with my 2019 Charger Scatpack! (untuned)
Shop: Muscle Motorsport Reno
Address: 3771 Mill St, Reno, NV 89502
My Instagram: Airsoft_Hemi ( / airsoft_hemi )
My Facebook: Airsoft Hemi ( / airsoft-hemi-100536241... )
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MOPAR OR NO CAR
2019 Dodge Charger R/T Scatpack
• Kooks 1 7/8 Long Tube Headers
• 3" GREEN Catted High Flow Connection MidPipes
• Borla S-Type Catback Exhaust (waste of money)
• JLT Cold Air Intake
• MMX 87mm Throttle Body
• 91 Octane Regular Pump Gas
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MODIFIED AIRSOFT GUNS
EMG Falkor Blitz (fully upgraded by Bloomies)
• Spring
• Short Stroke, FMR Piston, Spaces for AOE, new bearings with bushings under spur
• ASG 30K Motor
• 6.02 RHOP'd Steel Barrel with Flat Bucking and Flat Nub
• Re-shim, regrease, re-set the Gate Titan Mosfet
• Some polishing here and there
Krytac LVOA-S
• Prometheus 6.03 EG Tight Bore Inner Barrel for Airsoft AEG (Length: 310mm / Krytac Special Edition)
• Tamiya swap to Standard Deans
• Shoots at apprx 330fps with .20g bbs (I am almost always using Elite Force .25g bbs with this gun)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
AIRSOFT CAMERA EQUIPMENT
Headcam:
• Main Camera: GoPro Hero 7 Black (Usually recording at 4K, 30 frames per second)
• GoPro Hero 9 Black (Cinematic Mode: 40, 30 frames per second)
• Zoom/Selfie Cam: www.brainexplo...
• Side Selfie Cam (GoPro Hero 5 Session) (Rarely used in any video)
• Side Selfie Cam Mount: Universal Action Camera Gun Mount 2IN1 Picatinny Rail Mount Adapter Kit
Drone:
• DJI Mavic Pro 2 (recording in 4k, 30 frames per second)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
AIRSOFT LOADOUT GEAR
• Ballcap: Condor Multicam Mesh Tactical Cap & USA Flag Patch Stitching
• EyeProtection: H World Shopping Fan Version Cooler Airsoft Glass Regulator Goggles Ski Snowboard Bike Sports
• ESS Turbofan Goggles
• Facemask: OneTigris 6" Foldable Half Face Airsoft Mesh Mask with Ear Protection, Military Tactical Lower Face Protective Mask
• Plate Carrier: www.evike.com/...
• Magazine Pouch: www.evike.com/...
Secondary Plate Carrier:
• Condor Outdoor Condor Modular Chest Set, Multicam, CS
• Multicam Uniform: www.amazon.com...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Music Sponsor:
Swag Kartel ( www.youtube.co.... )
Check out Swag Kartel on RU-vid and subscribe!

Опубликовано:

25 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 115

@AirsoftHemi 4 года назад

This video here is proof: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KBwQWmIMVS4.html If anyone watching this video planning on going the same route i did, i HIGHLY RECOMMEND you get a re-tune after modding your Scatpack. Although i see horsepower gains, it threw off my current tune and now i have dips of power throughout the powerband until I get it fixed

@Clutched392 3 года назад

Did you ever get it retuned? If so then what horsepower are you at with the tune?

@AirsoftHemi 3 года назад

@@Clutched392 No re-tune yet. I'm throwing a MMX camshaft in there and planning to get the tune done at the same time.

@Clutched392 3 года назад

Airsoft Hemi ah okay. I was hoping to see some numbers with just the tuned throttle body, but I’ll be even more excited to see how much you’ll get from that cam! I’ve heard many things about mmx. Are you for sure going to go with an mmx? Or are you thinking about any other cams like a cam motion or something

@AirsoftHemi 3 года назад

@@Clutched392 Yes 100% going with MMX. I already bought the camshaft kit and mailed my factory PCM to get it unlocked so I can get a new HP tune done. But unfortunately I am running out of time since I will be on deployment soon so most my plans will have to wait until i get back

@Clutched392 3 года назад

Airsoft Hemi aw :/ well we will all be waiting for new content when you return! Mad respect for you 🇺🇸🇺🇸🇺🇸. How long are you going to be gone?

@TheXOMBIE13 4 года назад

When you showcase your car you gotta remember to turn the sick headlights on. And DAYYUUMMM your car sounds so nice

@AirsoftHemi 4 года назад

Noted lol, I'll keep that in mind for future reference

@JT-gh9hi 3 года назад

Welcome to America's finest city baby!! Car scene growing here💪🏎💨

@mitch2raw 3 года назад

You got straight to the point

@DirtySerb 3 года назад

Beautiful car, good information. Straight to the point. Subbed.

@mr.300c 4 года назад

HEMIs biggest bolt on gain while NA is a cam 👌🏿 (up to 70+ HP). Very pricey though. Your whip is setup proper my dude. Excited for you to get your retune. 😁

@AirsoftHemi 4 года назад

Thats actually my next mod. I'm going to save up for a Camshaft kit, Intake Manifold and do the Re-Tune at the same time. So at that point I'll be FBO cammed/headers Scatpack and can see what kind of power it makes. The ultimate NA build minus the E85

@mr.300c 4 года назад

@@AirsoftHemi it will be glorious! If you really wanted to go all out, stroker kit, maybe to a 426 haha.

@AirsoftHemi 4 года назад

@@mr.300c I'll look in to it. I usually buy my stuff from either Fast Hemis or Modern Muscle Extreme, so I'll do some more research first. Appreciate the feedback

@renesanchez7378 3 месяца назад

Bottom Line Up Front (BLUF). Thank you for sharing!

@momo300s2 3 года назад

Great no nonsense content 👍🏽😎

@Jboost412 2 года назад

Great numbers you put down on the dyno nice setup for sure!

@AirsoftHemi 2 года назад

Thanks bro

@HHTV60 3 года назад

Thanks. Good info.

@BroadDayJay 5 месяцев назад

Nice man thanks for the information

@sambo92 3 года назад

Catch can and 180 thermostat are a must in these cars.

@brandonUwanawich954 2 года назад

Idc about the catch can right now cause I’m under warranty but does the thermostat really help cause after 4/5 runs my cars heat soaked

@sambo92 2 года назад

@@brandonUwanawich954 both help noticeably. The thermostat helps a little for heatsoak but it's a band aid, the best thing is upgrading the cooling system.

@moparenthusiast2046 4 месяца назад

No, they are not a must, but rather a placebo.

@ITSYOUNGKING1515 3 года назад

Dope video bro definitely hate when videos are drawn-out

@AirsoftHemi 3 года назад

Thanks man, and they usually do that for the ad revenue. Used to be 10 minutes for RU-vid to maximize revenue

@elvismandelli304 3 года назад

Great video right to the point , thank you for sharing , besides the unlocked PCM what type of tuner do you use , and do you do the email tuning or take to your local performance shop? Thank you

@AirsoftHemi 3 года назад

I previously used Diablosport custom dyno tuning, but from now on I'll be using "HP tuner" because most shops tune with HP. So my factory PCM i mailed it in to get unlocked.

@universethegodlife2238 3 года назад

Good video!!!💯

@Kliffy77 3 года назад

Very informative thanks!

@AirsoftHemi 3 года назад

Anytime man!

@Sky1 3 года назад

Everything will be minimal until you are willing to change pistons. Then the mods can take you far. I got a video of a Scatpack running a 9.56 in the quarter mile at Rockingham Dragway. A Challenger with the same mod ran a 9.6

@demented392rt5 3 года назад

just pistons?

@Iceguddaphg 2 года назад

Just changing pistons you will lose power due to the lower compression, you have to add boost when changing pistons

@csavvthebarber3889 Год назад

What pistons, & what work did you do to support this or any other mods?

@Youngsoldier93 3 года назад

That boy is loud!!!!

@zoddie 2 дня назад

the almost 500 torque at the wheels makes absolutely no sense lol. The last thing you need honestly is a stage 3 cam. and retune.

@AirsoftHemi 2 дня назад

Dynocom Dynos read different than Dynojets. I just wanted to see before/after with those mods at the time. I now have a Cam as well pushing over 500whp on a dynojet dyno

@zoddie День назад

@@AirsoftHemi nice man, same for me. I have a Stage 3 HRT cam/ Stainless power long tubes, colder plugs, new radiator, and 180 thermostat making just under 500 at the wheels. I'm considering a CAI and maybe throttle body with a retune to pick up just a few more HP, my challenger makes max power at 6700, do to the cam. stock was aroudn 6400, There really is nowhere left to go for the money besides piston and rods and a supercharger. but you are looking at another 20k to make all that happen at least in the west coast. I'll just keep mine NA, it gets plenty of rowdy and sounds awesome. 700+ hp is not streetable unless you have slicks on all the time in the summer, which i've also driven, I love my scatpack.

@Ozziie415 Месяц назад

Where you get that Scat Pack Bee?

@e-sportsproof9165 9 месяцев назад

Link to your front splitter please I love this one

@alonsosotelo8411 3 года назад

Good content bro! Next mod should be a oil catch can. Not for performance but it will help protect your motor

@AirsoftHemi 3 года назад

Thanks, I'm GOING BIG. I already purchased a Camshaft upgrade and going to get an intake manifold. Once I get back from deployment and get those parts installed and a Custom Tune , I am going to be Full bolt-on Cammed Scatpack. Can't wait!

@alonsosotelo8411 3 года назад

@@AirsoftHemi can’t wait to see it bro. Just subscribed💪🏽 & thank you for your service

@YZ-YZ- 3 года назад

@@AirsoftHemi and you’ll be at sea level. Your car will be up another 80whp once you’re done with the build.

@CapyBara721 3 года назад

Very nice. Were you able to tune it at sea level yet? Wondering if, any extra HP/TQ gain after the tune

@AirsoftHemi 3 года назад

Negative, I'm about to go on deployment so I'm going to wait until I return to throw a camshaft on there and get a tune. Most likely I'm putting the factory airbox back on as I came to hate the ricey/whooshy sound of the aftermarket Cold Air Intake

@Hoo_Dini 4 года назад

Dangit man i thought i was first well second

@AirsoftHemi 4 года назад

Lmao you were close 🤣 Maybe next time xD

@sub_zerotv3877 3 года назад

🔥

@choo77choo 3 года назад

Good shit bro seen you on Coronado, look up grito garage on FB. Come chill with us sometime !

@AirsoftHemi 3 года назад

Yeah sure thing. I'm down

@braydenwatts2968 Год назад

What happened with the original dyno of the full exhaust system? They definitely said you had 460hp in that video

@AirsoftHemi Год назад

Different dyno system with different measurements (Dynocom =/= Dynojet)

@bossstrick 3 года назад

Why the green catted mid pipes instead of the regular ones? I thought the green cats were for hellcats and higher HP applications? And any thoughts on ceramic coating the kooks for temp control under the hood ? These cars get crazy hot under the hood compared to anything else I’ve ever driven

@AirsoftHemi 3 года назад

If you go to the "Fast Hemis" website they have the description of the Green Catted Midpipes vs regular catted midpipes. It looked like the better of the two. I also have no heat sink issues

@johnosorio3007 3 года назад

I made 450 straight pipe only no tune on a dyno jet

@AirsoftHemi 3 года назад

Dynojets read different than Dynocoms and Mustang Dynos

@niziksobirov2477 3 года назад

Did the temperature improve and is it better than a stock intake on scatpacks? Will I still get 15hp+ if I just install the intake or do I have to tune few other things?

@AirsoftHemi 3 года назад

The temperature on the hwy with the JLT CAI is almost always 3-5 degrees above ambient temperature, which is great. I can't remember the hwy intake temp with the stock airbox

@niziksobirov2477 3 года назад

@@AirsoftHemi thank you for the info 🙌

@jongibson4485 2 года назад

Would you get more HP with a Hellcat Lower airbox and snorkel tube? That’s a lot for just a few mods

@AirsoftHemi 2 года назад

I could only imagine the Hellcat lower airbox with a snorkel tube being comparable to the JLT CAI performance wise. The JLT also has a cutout where the hellcat snorkel tube would be at

@poneklr 3 года назад

Those numbers are way off. There's no way that car is making 512lbft to the wheels with those mods, plus the rwhp is way too low. My 18 Scat made 445rwhp and 451rwtq with a tune, 180 stat and hellcat lower airbox with a factory Hellcat paper filter.

@AirsoftHemi 3 года назад

It's a dynocom system not a dynojet, so they read different numbers. On a dynojet I made 460whp and 464 torque with just LT headers, midpipes, and a tune

@Mr_Chief 3 года назад

Bro, I’m confused.....I thought these things cars have 485 out the factory? How are the numbers lower with after market parts?

@AirsoftHemi 3 года назад

Scatpacks are 485 horsepower stock to the crank (not wheel horsepower). Wheel horsepower will always read lower because it shows how much power your car is truly producing after drivetrain loss and other factors.

@derekdimarsico5153 3 года назад

What is the difference between the $300 throttle body and the $450 throttle body. There both cnc ported 87mm but the $450 one says hemi in the title. I have a 2021 scat pack so idk which one to go with.

@AirsoftHemi 3 года назад

Speaking out of speculation, I'm pretty sure the $450 throttle body is probably just a sales gimmick. Some automatically assume that just because a product costs more it performs better.

@hemi5.7villain 2 года назад

@@AirsoftHemi got to look at the shipping date it might say ship out today or might be on back order

@reedpayne8620 4 года назад

First

@AirsoftHemi 4 года назад

Well done 👏🏾👏🏾

@leosanders3784 3 года назад

Think about throttle body spacer,some say it gives gains,I don't know?true or false how about ripp coils?

@AirsoftHemi 3 года назад

Ehh, I don't think throttle body spacer would help out too much. I feel it's just too small of a part to do anything especially after getting an actual larger throttle body. Most likely the route I'm going with is Camshaft upgrade and E85 as soon as I get back from deployment

@bobdallegro7696 3 года назад

It does ZERO!

@danielbarrios7478 3 года назад

So the scat pack is supposed to be 485 hp to the crank ik its supposed to be less to the wheel but is it really the much lower or is there a way to pull more hp im asking because next year i want to get a scat pack

@AirsoftHemi 3 года назад

Only way to pull in more horsepower is with a tune or with aftermarket parts. Scatpacks are normally 420whp on a Dynojet system

@danielbarrios7478 3 года назад

@@AirsoftHemi alright thanks brother cause i just got my 2020scatpack yesterday its such a beast

@Evil392_durango 3 года назад

Do you feel like it’s worth getting the 87mm throttle body

@AirsoftHemi 3 года назад

Without a tune, it's not worth it

@kingdaniels8559 3 года назад

Do these mods void warranty?

@AirsoftHemi 3 года назад

A Cold Air Intake shouldn't. I don't know if the throttle body would void warranty. An aftermarket PCM for tuning will definitely void warranty though

@kingdaniels8559 3 года назад

@@AirsoftHemi yeah I know the pcm would but can always keep the original and throw it back in like nothing happened lol thanks for the answer appreciate that

@johnnynae55 3 года назад

Question not being nosey but what did that 32 hp cost included mods and dyno and tune just asking

@AirsoftHemi 3 года назад

$299 for the throttle body, $299 for the CAI. Unlocked PCM would be apprx $500 and a tune would be apprx $400-800

@johnnynae55 3 года назад

@@AirsoftHemi ok appreciate that good start 👍 up just starting on mine

@AirsoftHemi 3 года назад

If staying N/A, I would recommend LT headers and/or camshaft with a tune. Simple bolt-ons don't really give much real world performance to these 392s

@omarestrada1195 2 года назад

What brand throttle body you get ?

@AirsoftHemi 2 года назад

MMX 87mm Throttle Body

@HennyTRX3773 Год назад

Do u know what throttle body u got installed

@AirsoftHemi Год назад

2013-2023 5.7L 6.4L SRT CNC Ported Throttle Body 87mm by MMX

@HennyTRX3773 Год назад

@@AirsoftHemi ty for the reply appreciate that

@erndoubleo9596 3 года назад

If u get cold air intale do u need to tune it? Afterwards?

@AirsoftHemi 3 года назад

It's not required, but I highly recommend a tune due to it changing your Air/Fuel ratio

@goodinsrt8 3 года назад

They come factory with a CAI, you won't gain any more HP with an aftermarket.

@danr8313 3 года назад

Did you get the oiled filter or dry?

@AirsoftHemi 3 года назад

I got it dry

@danr8313 3 года назад

@@AirsoftHemi how did you find the red filter in dry?? I can only find the dry in white.

@AirsoftHemi 3 года назад

@@danr8313 My apologies. After re-confirming, it actually is the Red Oiled filter. Per MMX website though, either oiled or dry are both proven and popular options.

@madvillain_105 2 года назад

Do you plan on keeping the jlt intake in the car as long as you own it? And any noticeable difference? Lower temps?

@AirsoftHemi 2 года назад

With the JLT CAI, the intake Temps is always about 3 degrees above ambient which is pretty good. Idk how the Temps were stock, but it definitely is NOT a "hot" air intake. And yes I plan on keeping the CAI. Not really much noticeable difference without a tune

@Alex-dm9ou 3 года назад

Yo bro did you have to unlock your pcm yo tune your scat pack ?

@AirsoftHemi 3 года назад

Yes, an unlocked PCM is required to tune your Scatpack. After getting the CAI and 87mm Throttle Body, i did not get a tune done so the car is not performing at optimal capability until i do