How Much Oil Can't Drain with FUMOTO Engine Oil Drain Valve? How Much Oil is Trapped in the Oil Pan?

Подписаться 23 тыс.

Просмотров 5 тыс.

50% 1

In this video, I will measure how much oil a FUMOTO oil drain valve traps in the oil pan that cannot be drained on three different vehicles.
lets check it out!
Full Review Video:
• Full Review of FUMOTO ...
Complete Oil Change Video:
• EASY Oil Change - NO T...
www.fumotousa.com/
-----------------------------------
Music:
Good Times - Patrick Patrikios
From RU-vid Studio free music audio library
-----------------------------------
Amazon product link are paid commission links. As an Amazon Associate I earn from qualifying purchases.
-----------------------------------
How-to and Reviews provides product review videos and how-to videos for a variety of unique and common products and applications. Save some money and do it yourself, and be informed about products.
If you find the content interesting, Subscribe so you don't miss future videos. A new video is posted at least once a week.
Subscribe to How-to and Reviews: / @howtoandreviewsofficial
-----------------------------------
#fumoto #oil #valve
-----------------------------------
How-to and Reviews

Хобби

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@Bendc1970A1 7 месяцев назад

You could also pour a little fresh oil in while the valve is open to flush a little bit of the old oil out.

@melanehme3661 4 месяца назад

my thoughts exactly: get a quart of the cheapest oil (probably non-synthetic) and dump it at the end in to flush; still some will remain but it's better than nothing!

@nickolasbarnes4430 3 месяца назад

My car takes 3.7L so I just push the 0.3L through to flush to finish off the container.

@Life2race 6 месяцев назад

Have it on two cars. I put 1/4 quart into filler port too get some old oil out. Usually left over stuff from last oil change. Makes it a quick oil change. And you find yourself changing oil more frequently. Prolonging your engine.

@HowtoandReviewsOfficial 6 месяцев назад

Good point! Plus, I have to add oil to all my vehicles anyway because they burn oil. Two of them I add a court every thousand miles. Another one I have to add a quart when there’s about 50% oil life left. They are always getting fresh oil mixed in. I’m 0% worried about the small amount that the valve leaves behind.

@97kt69 4 месяца назад

Longer drain time will mean less oil in the pan wait until it stops dripping completely it may take an hour or more. I understand you're not retired yet so you probably can't spare that amount of time. I removed mine to check this on a 2016 Explorer and got way less barely a few drops. My vehicle was horizontal on a lift at the time so if using ramps would probably make a difference too. TY for a good vid and I give my Fomoto a👍

@HowtoandReviewsOfficial 4 месяца назад

Good point. I used the timing of a typical oil change process. I let it drain until it transitioned from a stream to a slow drip. Then removed the valve and again let it drain until it transitioned from a stream to a slow drip. I did not let it drain overnight until every last drop was gone. That would definitely be interesting to do, but figured it wasn’t a practical real world application.

@sgcole111 10 месяцев назад

To put the issue into persepctive, a full oil/filter change typically leaves about 0.8 quarts , about 760 ml, left in the engine-slightly more or less depending on engine, when using stock drain plug. If Fumoto leaves another 70 ml, that is a 10% increase in remaining, undrained oil.

@G5Hohn 8 месяцев назад

Thanks for testing these "velves" so I know how much oil residue remains.

@HowtoandReviewsOfficial 8 месяцев назад

Glad it was helpful!

@alejandromtb 4 месяца назад

That is, if the car is in a flat position. However, if the car is on ramps, the angle of the drain hole will be more slanted, allowing more oil to be drained.

@HowtoandReviewsOfficial 2 месяца назад

That’s true. This was a flat ground test.

@MRamos7273 5 месяцев назад

To be honest it won’t matter because you’re putting a fresh oil filter every time you do an oil change… Well at least your supposed to

@HowtoandReviewsOfficial 5 месяцев назад

I completely agree. Plus, all my vehicles burn a little oil, so I’m adding fresh oil regularly as well.

@southern.alaskan 7 месяцев назад

glad mine is on the bottom of the pan. 0% left over after draining.

@HowtoandReviewsOfficial 7 месяцев назад

Nice!

@TNungesser Месяц назад

I wonder if I can dring down the part that screws into the pan so that it comes to the bottom of the pan so all oil drains out? Or can I drill a hole in the screw area inside the pan so that the hole comes to the bottom of the pan and so the oil in the bottom drains out?

@HowtoandReviewsOfficial 26 дней назад

It wouldn’t change the thread engagement, so as long as it’s screwed in tight, I personally don’t think it would matter.

@rdkirk3834 Месяц назад

It's not just the shape of the oil pan but also the composition of the pan. A cast pan has its own thickness to accommodate the plug thread, and it may achieve nearly perfect draining with a standard plug completely removed because the innermost thread is at the level of the inner surface of the pan. A sheet metal pan will usually have a welded insert to accommodate the threads, and the inner level of the thread is still above the inner surface of the pan. If the Fumoto thread is no deeper than the thread of that insert, there won't be any less oil drained.

@HowtoandReviewsOfficial Месяц назад

Absolutely!

@TNungesser Месяц назад

You're a freakin genius. Seriously. How many people on this earth would know that? Not many!

@arthurmroyce 28 дней назад

I always have the nose of my cars up in the air when I drain. I always get more oil out than when flat. This ensures I get the most out even with a Fumoto valve installed...which I do.

@HowtoandReviewsOfficial 28 дней назад

That definitely helps!

@tomaskey6844 4 месяца назад

The threads that extend too far into the pan could be cut off I think. I don’t worry about it as I usually change my oil often enough any remaining oil in the pan is okay with me.

@HowtoandReviewsOfficial 4 месяца назад

Same. Plus I add oil between oil changes. All of my vehicles burn some oil, which is normal.

@aarongonzalez2156 3 месяца назад

Oil drain valves state the oil must be at operating temp so it can drain fully

@HowtoandReviewsOfficial 3 месяца назад

Good point! I always change the oil when the engine is warm. I assume I did it for these tests, but it was so ago yeah because I had to set up for filming, I can’t be 100% sure.

@dylonabubo7513 8 месяцев назад

Says its negligible and throws the cup 😂😂😂😂 what a guy Thanks for this pt2, big brother 🫡 just recently watched the 1st video like 5 minutes ago lmao. Putting this in my shopping list now 👏

@HowtoandReviewsOfficial 8 месяцев назад

Nice! I do have a third video in progress. Timing how long they take to drain. Since the path is smaller, they do take a little bit longer. Maybe 10 minutes. I usually flip the valve open, then go do something else and come back later.

@LemonySnicket-EUC 2 месяца назад

For proper oil change parking the vehicle at appropriate angle would be best.

@1Corinthians151-4 2 месяца назад

put the vehicle on its side slightly.

@JuanOrtiz-ku2wz 10 месяцев назад

I think I seen this video my friend wearing shorts and Keen Newport H2 sandals

@HowtoandReviewsOfficial 10 месяцев назад

That is correct. I was made aware of an error in the information. I decided to remove the video, fix the error, and re-post it. I did not want to leave it posted with incorrect information.

@riceburner4747 10 месяцев назад

I don't mean to be negative, but how HARD is it to put a wrench on it? Get a little oil on our hands? 🙄 They make a flexable extension on a socket that your hands are no where near oil. What's a REAL PIA is getting out jacks/jack stands & taking off shields. I'm a fanatic on getting ALL of the oil out. I even tilt my car to help empty everything. 1/2 cup is 1/2 cup too much. Sorry.

@HowtoandReviewsOfficial 10 месяцев назад

Nothing wrong with that! I did it that way just fine for 25 years. In my personal experience, I have two vehicles that are very low ground clearance. There’s not room to get a wrench under there with any leverage. With the valve, I can easily reach under and flip the switch. I do about 10 oil changes a year, so the convenience of not using a tool does stack up. Especially in the freezing winter. It’s a luxury to slide a catch pan underneath and flip a switch. Other people might just enjoy, trying new gadgets. It’s a free country, people like different things and can spend their $20 however they want. 🤷‍♂️ But, if someone prefers to use their wrench, absolutely nothing wrong with that!

@Bendc1970A1 7 месяцев назад

You are also running the risk of over torqueing or cross threading especially if someone else is doing oil change. Fumoto is replaceable and saves the pan threads some wear and tear.

@davidmidcalf3470 6 месяцев назад

Its not hard at all, but maybe people like the cleanliness of it, i have a resin driveway and even though i used 2 tarps i still spilled a little oil which has now stained the drive (using the "classic" method). My truck takes 8 litres of oil and since most oil tubs or spare bottles etc only hold 5 litres it gets messy swapping tubs around. With this i can simply feed a tube directly into the empty oil bottles from the last change, close it when the bottle is nearly full and swap the bottle out for another and then open it back up again to finish the drain 🤷 no mess, no fuss

@LemonySnicket-EUC 2 месяца назад

These valves are worth it. 💯

@johngreen2510 Месяц назад

@@davidmidcalf3470 Precisely. When you spend a lot of money on a pavestone driveway, you don’t want to be spilling oil. If you have ever changed the oil in a 3rd gen Tacoma…the oil literally SHOOTS out the oil pan and splashes like crazy.