HOW MUCH WOULD YOU PAY FOR THIS BULLBAR...?? 

So the music missing... - I was totally meant to do that 😶😶 It’s gonna be the next big thing... promise 😜

Hm... silent welding montages, never seen that done before hahaha

While I do enjoy the look in a bullbar with no hoops, in my mind it loses out on functionality. Some people might think it's only there to be a light and 2-way aerial mount, and think that it would still be useless when you hit an animal. But, they do indeed stop you getting a mouthful of kangaroo. If it's high enough to hit the hoop, that will both redirect it and decrease the amount of relative energy it has, meaning it will smash into the roof or windscreen at a better angle and a slower relative speed. It will bounce up and travel along with the car, instead of just going straight through the windscreen. And my personal experiences has taught me that the hoops are useful for other things, such as stopping a blow or as a resting point for the car. One of my mates once had a Hilux roll down a hill into his bullbar, bending it back and destroying the ute tray, but the front of his car remained funtionally the same, just his spotties were off. And once a mate who was new to four-wheel driving tipped over on a steep hill. Dad parked up against a tree so when we pulled him back on his wheels we weren't dragged down the steep, loose hill. Now there's a little bit of paint that rubbed off on the tree. My only complaint with bullbar hoops is that they're not thick enough or supported enough in the bar itself. They're just welded on top, when they really need a plate welded in the bar to be welded to.

Bullbar? Nah, I like to keep the roo's outside my headlights and radiator.

Love watching you do this custom work and see a 4x4 with a unique look and not just the usual and also gives people ideas to do something different !

Man after my own heart Sam love fabbing stuff up like that , well done so far , cant wait for the reveal

Nice bar fab work, I noticed lochi lux fab is a "Cleetus McFarland" fan by his shirt.

I like the look of the “prerunner” style front bar. Nice work mate! 👍🏻

Loving the bullbar already and it’s not even finished 😍😍😍

Love the look but not sure I'd want to give up the protection the top bars offer... Have saved me from putting panels/lights into the bank in deep tracks more than once and keeps branches off my front end on really overgrown tracks. Plus I'm always driving in skippy territory... haha

Loving the Japanese safety boots and the "Increased Airflow" modified bullbar

Samy's custom 4x4 modifications yewww!! like this sort of video style...

Nice. Usually I don’t even watch product placement videos

Love the consistent grind to get better

That front bar looks proper mate Good job ❤🤙🥵

when I saw your Instagram stories I came straight to your RU-vid channel love your videos

Thanks for blue balling me at the end 🤣 keen for next weeks vid

Hell Yeah Brother, Cleetus T-Shirt for the win during fabrication of the exhaust

Wanted to do this to my 95 Series Prado. Apparently you are only allowed to make a front end for vehicle that have no air bags where I am.

Im glad I read the comments before I watched the video, because that silent welding montage would have had me pressing all my volume buttons 😂

Really froth the hoopless look Sammy good to be going different! Also froth the welding montage in this one 😉

Is any of the mods you do engineered? Curious about insurance and road worthy to register. Love the bar would like it on my GU but with the hoops lol

Love it mate looks good

Coming along great

HI Sam I like the fabrication work a lot of hours burnt enjoyed CHEERS MATE.

How does the shed floor matting go with a buildup of grinding dust and dirt mate?

Looking good so far bro..

good old chinese work boots

Love the safety shoes

Just watch for the varex valve sticking and theyre very restrictive when theyre closed, I had one on my petrol 105 series and it was good when new but after a couple weeks it went to shit, now I just have a valve on a dump pipe and its working alot better

Like you, I have had to do some modifications to get the look right. It's almost impossible to get anything for my car (Pathfinder WD21) so I buy what I think I can use and make it fit . Bull Bar was done about 1& a half years back and now doing a rear twin arm bar. Some may ask why? Why not. . I can't put any extra fuel under her, for those long trips. And it's not good for carrying Jerry cans in the car. . . Soo thought why not a rear bar. (About the only good thing to come from C-19 was some extra money to pay for it.) So found a guy selling some rear bars on Facebook, cut it up a little and about to test fit it over this weekend. And yes the time one spends on this sometimes make one wonder why do I do this to my self.... But in the end of I feel good about it. . Then it's worth the effort... When done I will put up a photo.

Good video mate 😎👍🏼

You should sound deddon your cab so you don’t have to wear air plugs while driving

Old mate wearing the cleetus shirt is great 👌🏼

That bumper looks fkn good! An idea borrowed from the A-pillar mounted lights on Wranglers - small spread-beam lights on the corners pointing 45 degrees diagonally really helps spot wildlife at night and flush-mounted in a bumper bar would be the dream. BTW I think 3 round spotlights with one in the middle is technically not legal here in QLD. Besides, wouldn't the extra airflow help cool the beast under the bonnet? :D

Awesome vid liked before watching as always

Hey Sam. Just a quick question why to you use the old version of the toolpro battrey grinder and not the later brushless model one?

Anyone know the legalities for making your own bulbar or modifying one? I want to do a custom one myself but i thought they had to be adr approved for cumble zones, air bag sensor compatible, pedestrian impacts etc...?

Good stuff

Are u doing a retune with harrop after the new zaust went in? New front bar looks minticle

What thickness plate did you use for the bullbar mate??

Love the built not bought truck cant wait to see the new wrap!

In vic those varex mufflers are only legal for off road use dunno about where u are but in vic we can’t use them on the road unless there factory fitted

I would of kept the existing bar you had Sammy it looks good and is functional

I am curious, what happens with adr compliance? Like if you had an accident with a custom bull bar. Would there be an issue?

you should have come down to Toowoomba from where you were cuz thats where I live

That hilux in the background. Love it

Old mate rockin a Cleetus t shirt 🤘

That's cruel haha wanted to see the finished product

What’s that song call at the end of your video. Keep up the good work💪

Where did you get those progressive indicators?? Please

as if u leave us hanging haha. nah but seriously I love it and can't wait to see the final product

Love the safety thongs

80s engine in the background at the end? I know a 1fz-fe any day 🤣

I think you should of left the bar how it was it looked mint

Bullbar looks unreal I want one I can’t find a decent bar for my patrol they all look pretty shitty but that’s mad

I would usecsteam pipe next time not galv. Paint or powder coat goes better on steel

Recess indicators in mate

Wonder what the legality are with this, with ADR's engineering etc...

5:34 Where is the montage music at?? Hahaha

Love the industrial safety footwear...

Think there’s some missing audio

Hey man I just bought a 4.2 gu patrol with 370 ks what should I do to the Engine to make sure it stays In good health and performs well

Should cover the ends in around the winch then don’t see the which just the fairlead

Should design it for a high mount winch. The only way to go

Strangely silent welding hahaha

As always good to see the zing phong safety thongs. Nothing better in qld.

Wheres the follow up to this been looking for it for ages

Love ya Japenese safety boots. 😂🤣

Colin Furze has his safety tie, Sam has his safety thongs!

sounds good but did u get it certified by a auto engineering and structual boilermaker

Anyone else check to see if their phone volume cut out 😂

Sam what happened to your torsion bar sway bars?

That gap between bumper and headlights and fender though

Is it airbag compliant I wonder???

Hi Sam I’ve been watching your videos for a long time now I live Gladstone, Qld, and I’m wondering have you seen there’s An event happening tomorrow for 4wd called king of the strip it would be awesome to see you go down

Should go full stainless tray

What muffler is that? I've seen valve cut outs but that muffler is what I need

What’s the legalities in building your own bullbar? Doesn’t need to be ADR approved?

It will look nice mate but what happens if u smack skippy with no hoops

How much for the old bull bar

AAAHHHHHH nooooo that current bar is awesome

Great work. Get yourself a plasma cutter. Makes life easy.

I have always thought those silly holes or black dots around the wings in the original bar are prettyvdam ugly

its a nice bull bar

Good video first

Not bad🤙

I would pay heaps it looks mad

Yo first time on this channel before 100 comments

What engine is in the gu because I want to put it is my gq

Isn't modifying an ADR compliant bull bar illegal? at the very least it makes it not ADR compliant anymore.. good luck with an insurance claim if you hit anything.

Anyone else get awkward welding silence 🤣

Sam do you have possibly some welders flash 😑

Where do i get progressive tail lights from!!!!!!

And black clear views mirrors

Is it legal to cut and mod a bar like that?

Bullbars have hoops, thats a bumper bar

Is it legal to modify your bullbar that extensively??

Great way to protect the front of your patrol less than before. Never understood nudge bars, 0 protection from a kangaroo rolling up over bonnet into your windshield.

What do u want for ur old bullbar