How the Samsung Reset chip really works 

Another channel recommended bypassing the fusible resistor with a bit of copper wire to short across it. Boot up the printer once, then remove the wire. Worked for me.

you're doing the lords work

I have Samsung CLX-3305, it comes with CLT-R406 fuser. I have tried to reset the printer several times. I have used a resistor of a value 46 kohm 100 kohm (this was the origina resistor value) 137 kohm 270 kohm together with picofuse 63 mA or fast action 50 mA glass fuse. The printer says still: "Fuser unit failure #U1-2320 turn off then on." What to do next?

Means in 200k how many watt needs? Also in 56k

just for reference the main reistor is 100K not 200K as the video narrator says, not that that is really important

Has there been a class action lawsuit against Samsung for this illegal practice?

Why you put another one resistor in parallel? ?

Hi, this method is to reset toner issue that it disallow to print and lot of red Led in front panel showing the locking??

Can you please let me know how can i the Samsung SCX4729FD by Printing get the Black STREIPS .

Fantastic! Thank you very much!

I have a Samsung C410W and it appears to be just a 200 k and not a 56k with it. I replaced it with a 56k and it quickly started smelling overheated. When I test it, it still shows 56k. Should I put in just another 200k which didn't register anything with an ohm meter?

Hi thanks for this video, i have the samsung xpressm2880fw but im not able to find the resistor. Is there one on this printer ? I have the message fuser unit error

Please how can I reset Samsung clp 620nd chips. Or if I refill at 20% can it still print?

شكرا لك اخي على العمل الرائع

What can I do for hp107a chip. How to overcome problem with this chip?

Hello everyone! I'm having an issue with my Samsung color laser printer. I recently replaced two resistance fuses in the printer's oven, both with a resistance value of 100 ohms and connected in parallel. However, the fuses keep burning out and the printer indicator switches from blue to orange. Has anyone experienced this problem before or have any ideas on what might be causing this? I would greatly appreciate any advice or suggestions. Thank you!

Thank you! I replaced the whole thing, and when I go to print, it says printing, but nothing is coming out!

Would it work to put a shorting strip in the cartridge instead of a resistor?

how to reset chip for samsung 6260 please

Good

Greetings, how are you? I need support as a technician, I have a samsung xpress c460w print blue ........ the entire sheet and does not give an image

can i Reset chip xerox 6700 شكرا لك

Anche la stampante samsung Ml-1665 ha questa resistenza?

I payed to someone to do me, a hack print many years ago. I don't know how they did it. But today I cleaned the drum unit and the transfer belt. But does not start. Only for 2 seconds rotate the spins and after that all stops and the red light is on. Its acting like paper jam, but before I cleaned it worked... What may be the problem? Please help me. I can send you a video if you want. Now I checked with Samsung printer manager and the error is "replace/install toner waste bin"

What about the watt?

Printer bar Sellprinter bar Sellphone Ilnk? ( l )