*These fans were never meant to run on a single HIGH Speed. Aftermarket harnesses that use that as an option are not fully taking advantage of the factory fans and can actually damage the wiring and possibly melt/cause a fire. These fans were designed to go to high speed from low speed, never from off to high speed. Because of this, the factory harness can burn up and the relay box can melt from extended use of a single high. Also use low speeds and then high speeds*
The two wires going to the PCM are: Green wire to Pin 42 of the Blue connector. Blue wire to Pin 33 of the Red connector.
This is a quick video to show how to pull a factory / stock efan harness from a donor 05-06 GMC / Chevy truck from a junkyard. We also show which wires you need to pull, which wires you need to hook up, and which wires you don't need. Also shows how to strip the harness down to get rid of extra wires not used and how to test the efans before you buy them. Enjoy!
7 сен 2024