How to 3D Print Thor's Hammer, With Lights! 3D Printed Mjolnir From Thor Love & Thunder

Подписаться 9 тыс.

Просмотров 26 тыс.

50% 1

In this episode of MAKE/DO David and James 3D print and finish the Reforged Mjolnir from Thor Love & Thunder. This detailed prop includes faux metal textures, weathering, and prop lighting!
Special thanks to this episode's sponsor Do3D.com for supplying the amazing STL files for this project! Be sure to check out their wide variety of 3D Models.
3D print your own Mjolnir / Thor's Hammer - Do3D Link [do3d.ositracker.com/313279/11951]
search: cracked mighty thor mjolnir
Our lighting rig file is also available for free on our site
[ www.make432.com/free-files ]
Previous Do3D projects
Khonshu Statue | Moon Knight - [ • 3D Printed Khonshu Sta... ]
Spellbox | Dr. Strange - [ • Dr. Strange’s Spell Bo... ]
We are also proud to announce the launch of our Patreon! If you are interested in joining our community, supporting the channel, and gaining access to additional perks, projects and behind-the-scenes sneak peeks be sure to check out our Patreon! - [ / makedothings ]
Interesting in building some of the projects we have designed ourselves? check out our shop -
[www.make432.com/shop}
Instagram - [ makedo.things]
Facebook - [ makedo.things]
Materials Used (affiliate links)
Prusa i3 MK3S+ 3D Printer [www.prusa3d.com/product/origi...]
Elegoo Water Washable Resin - [amzn.to/3vYdfX8]
Polymaker Matte PLA - [amzn.to/3NftEgj]
Sandpaper 220 - [amzn.to/3sniL3J]
Wood Filler - [amzn.to/3TfohSD]
Frog Tape for Delicate Surfaces - [amzn.to/3Rd4WQ0]
Polyfil - [amzn.to/3dYAdI4]
Rust-Oleum Primer - [amzn.to/3rudok3]
Rust - Oleum Hammered Metal - [amzn.to/3IAwDOh]
Metallic Silver - [amzn.to/3EWbLzR]
Silver Gilding Wax - [amzn.to/3NhhbZD]
Ice Blue LED strip - [amzn.to/3bi1JPv]
8 AA Battery Holder - [amzn.to/3QJFe6b]
12v 1A Power Supply - [amzn.to/3bn7bAG]
12v Power Switch - [amzn.to/3brDa2R]
12v Power connectors - [amzn.to/3OzC6YT]
Steel Threaded Rod - [amzn.to/3Is7Ihj]
Disclosure: Our recommended products contain affiliate links, and we only recommend products we would use ourselves. Using these links is no additional cost to you, and we may earn small commissions to help grow the channel!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
00:00 Intro
01:27 Pre-Assembly
03:26 Sanding
04:57 More Assembly & Sanding
07:01 Painting
11:00 Weathering
14:23 Final Assembly
19:49 Final Thoughts / B-Roll

Хобби

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@make432 2 года назад

Thanks for watching! Make sure to *subscribe* lots of super cool projects to come!

@Vibranium_man 2 года назад

Can you do Captain America's shield?

@make432 2 года назад

Definitely on the agenda ;)

@MihaiDobrin88 4 месяца назад

Great job. A tutorial for making black phanter helmet with lights would be great

@make432 27 дней назад

Ohhh that would be awesome!

@mattcollins9167 Год назад

Absolutely criminal that you guys don't have more subs, easily one of the best resources in this hobby on RU-vid.

@make432 Год назад

We totally agree ... tell your friends haha. Thank you so much for the compliment, we are very happy to our videos are helpful!

@darrenpaterson6792 5 месяцев назад

in the process of this exact build at the moment but done on an fdm printer, just sanded all the main hammer parts, and ordered some nice leather for the handle, your tutorial was a great help. nice quality of content.

@stevrgrs 2 месяца назад

That really looks amazing man! I’ve been wanting to make one and even the top channels just didn’t have one that looked that great. YOURS looks amazing. It’s a shame your channel doesn’t have more subs. I can’t imagine what you could make with more $$$ :)

@make432 Месяц назад

Thank you so much - we have taken a bit of a break from the channel but we should be back soon with some more awesome projects. Hearing your amazing feedback is super encouraging!’n

@Hateweek1984 9 месяцев назад

This is epic....working on a mulnir my self !

@make432 9 месяцев назад

Fantastic - best of luck!

@physcosnake 2 года назад

The gilding wax pass was magical, I'll be picking some up for my terminator arm

@make432 2 года назад

it is surprising how well it works, best of luck!

@Echo_3D1 10 месяцев назад

I cannot believe your channel has so few subs. Your videos are incredible quality. I hope to achieve that awesome editing myself

@make432 10 месяцев назад

Thank you so much!!!

@baconsbeast 2 года назад

So amazing! such a good and helpful video, with amazing editing!!!

@make432 Год назад

Thank you so much!!

@billycregin6441 2 года назад

Amazing video bro👍 Been in the process of building this model for the past few day and this is just what i needed!

@make432 2 года назад

Glad we could help - best of luck

@Edramon53 10 месяцев назад

This looks amazing. I got a 3d printer (Bambu Labs P1P) but never actually made anything like this - mostly just functional stuff, the occasional collapsing sword or other small toys and ornaments. Recently seen some videos from you and from Frankly Built and sorely tempted to give this a shot.

@LakeVermilionDreams 7 месяцев назад

Do it (if you haven't yet)!! I'm printing Stormbreaker for myself right now!

@VuNguyen-sx4lt 2 месяца назад

thanks for listing all the items required for the project in the description!

@make432 Месяц назад

Happy to help!

@Purely_Satisfying Год назад

Great video and tutorial! Thanks for your time 👍

@make432 Год назад

Glad it was helpful!

@mattzinnel4083 Год назад

I honestly feel lucky to have found your channel... your content is top tier

@make432 Год назад

thank you so much! Welcome aboard!

@blizatrex 2 года назад

Pretty awesome. the gilding wax was a great choice.

@make432 2 года назад

Thanks! It is such a cool finish!

@danfarrik Год назад

The quality of your videos is next level. Please keep it up.

@make432 Год назад

Will do! We should have something new out by the end of the year!

@kryptyk3068 Год назад

That looks amazing! I'm working on my own 3d printed Mjolnir from The First avengers. Definitely gonna try that Gilding wax on mine for sure :)

@make432 Год назад

That is awesome - we really want to make a non-cracked version at some point too. And the gilding wax technique is like magic, it really ads some depth to the finish that straight metallic paint cannot achieve! Best of luck

@bobbyscott7224 Год назад

That's dope af

@make432 Год назад

Thanks!

@Substitute_Zero 2 года назад

Another awesome video, guys Always excited seeing your notification on my phone Best of luck on the patreon! Once I’ve got a little more disposable income I’ll gladly join

@make432 2 года назад

Thank you so much!

@MrNewsArt Год назад

Wow I really thought this is a large channel, as the quality is insane.. you guys deserve so many more subs

@make432 Год назад

Thank you so much, we think so too haha

@wizards1985 Год назад

this is crazy ! :) |LOVE IT !

@make432 Год назад

Thanks! Really good for hammering really big nails

@blubburfish6066 2 года назад

Awesome video

@make432 2 года назад

Thanks!

@definitelynotchadfish 5 месяцев назад

Idk how this channel hasn’t blown up. Likely lack of videos. Which I understand this stuff is insanely time consuming. So no hate. But your work is so good.

@mediocregam 2 года назад

This is super helpful since I'm doing a similar print right now. for the handle, I am thinking about wrapping it in some dark brown electrical tape and cutting out the excess. I think it will turn out very well. Great video!

@make432 2 года назад

Good luck! Let us know how it turns out!

@Unown_J423 Год назад

I am currently going through the nightmare of attempting to sand the handle of one i printed (pla) i may use your idea, any word on how this turned out?

@l33ble Год назад

I’m printing this just now. Planning on running wires down the handle and putting a little switch at the bottom.

@make432 Год назад

Oh that would be really cool!

@beriljean-baptiste9825 Год назад

Great video and tutorial! Thanks for your time. I would like to print the main part on an FDM printer. Would it need support because of the cracks or could I just print it without any support?

@make432 Год назад

Yes, you will need to use supports for FDM for the best results!

@LivingLambeaux 2 года назад

Crap! Now I gotta do one of these lol amazing job!!

@make432 2 года назад

Thanks! Send us a pic if you do!

@thetancookiejr Год назад

This is awesome I'm making mine rn I've begun sanding. If I'm gonna use steel wool do u know of what kind is best, and when and how to use it?

@make432 Год назад

We usually save steel wool for the final sanding before painting just to clean everything up and usually stick to 000 or 0000 (the more zeroes the smoother the finish)

@woxntox Год назад

This is so cool I had to make my own. Printing out the last pieces now. Do you have a wiring diagram? I never know where to send my electrons.

@make432 Год назад

Unfortunately we do not (electrons are also not our area of expertise) we simple wired the the battery to the led then added the switch on the positive wire. Hope that is helpful, best of luck!

@LakeVermilionDreams 7 месяцев назад

Resin for the hammer head... How'd it hold up? Sturdy enough?

@mikeb5258 2 года назад

Did you need supports on the main hammer? I'm getting some issues with the cracks.

@make432 2 года назад

Yes! We printed ours in two parts on our Anycubic Photo Mono X - We did the auto supports and then added some manual in key spots to make sure everything was secure.

@Bearded_Blonde 2 года назад

Any way you can show your settings and orientation for the resin prints?

@make432 2 года назад

We will look into showing the orientation of this project and make sure to include in future videos!

@DaTr1Xa 2 года назад

Nice work, step by step. i bought the stl and try to build the hammer too. all pieces of the handle are already printed. :) i have a question. there are 4 ornaments in each stl files (greebles for side cap 1/2). is it possible for an FDM printer to make the decorations available to print every plate flat on the build plate? currently i would print them with support and slope. the project is fun. im thinking to buy some star wars stuff. :)

@make432 2 года назад

Thank you! The FDM printer might have difficulty printing the detail, but you can give it a try! Good luck, let us know how it goes!

@mckennaodonnell7138 2 года назад

If you have the Meshmixer application you can split the ornaments up into separate files, which would then allow you to orient them to be flat on the built plate. I know it is extra work to do before printing, but for me it seems like a better pay off with better detail on the front and easier/quicker printing all together

@user-et1hm2ky2h Год назад

Hey currently building the hammer, did you guys put a clear coat(anything specific) on the parts?

@make432 Год назад

We did not, but it would not be the worst choice to add a clear coat over everything if the prop is going to be handled - we recommend Rust-Oleum clear gloss amzn.to/3EJDKFq - we used it on our pokéball build and has help up so far!

@swankyk Год назад

What is that spray you use after putting on the crazy glue?

@make432 Год назад

This is an activator that instant cures the glue!

@nathanbaumgardner2470 6 дней назад

Hey, quick question! Can you do this with fdm printing?

@make432 2 дня назад

You can, but there will be a lot of clean up required!

@silbestardungdung4931 Год назад

Make Gorr the God Butcher Necrosword from Thor : Love and Thunder ❤️ ⚡

@make432 Год назад

OOOh that would be a good one, thanks for the suggestion!

@silbestardungdung4931 Год назад

@@make432 Ahh...welcome.. really looking forward for it..🤝✨

@claytonpurcell1582 9 месяцев назад

Imagine having a connection with a hammer, Thor sending death threats

@make432 9 месяцев назад

😂

@propsandcosplay 2 года назад

Hi can you please give me the full details of your resin 3d printer please thank you looks great well done

@make432 2 года назад

Thank you! We use the anycubic photon mono X! amzn.to/3u8h5g5

@Purely_Satisfying Год назад

I would probably use the same resin for seams inside

@make432 Год назад

Worked perfectly for us! We also find it is slightly flexible which makes things more durable.

@Purely_Satisfying Год назад

@@make432 Awesome 👍 I will try this method very soon as well 😉

@mikeb5258 2 года назад

What did you use for a counter weight?

@make432 2 года назад

We actually forgot to put the counterweight in before we sealed it up. But the plan was to use sand secure with a cap of hot glue!

@michaelfriend6917 11 месяцев назад

What is the dimensions of the hammer? I have a Anycubic Photon M3 Premium. Looking to see if I can print the whole hammer head. Printing Dimensions: 9.9*4.9*8.6 in. / 250*123*219 mm(HWD) thanks

@make432 11 месяцев назад

Full Hammer head - is 9.75"x6"x6" the handle parts are split into smaller pieces and should fit your M3

@xrakuu 11 месяцев назад

I doubt ill get a response! but how long do you normally wait between paint coats,let primer dry/cure then paint

@make432 11 месяцев назад

We usually let primer cure for 4-6 hours for final colors we usually let the paint dry/cure for 24 hours between each coat just to be extra safe!

@xrakuu 11 месяцев назад

@@make432 Thank you so much! It really helps!!

@mikeb5258 2 года назад

One thing to mention the handle is a bit long to print on the Prusa MK3 its taller than the print space. I had to run it on its side and lay it flat. Not sure how that is going to come out but FYI to anyone who is getting this to print.

@Bearded_Blonde 2 года назад

I'm currently printing the handle on my prusa mini I ended up cutting the stl before slicing in prusa slicer to fit the build height

@make432 2 года назад

Yes we ended up just clipping the top off slightly - it did not seem to effect the overall strength and fit of the parts.

@robmedi44 Год назад

I did the same with my handle tip. I super glued it after printing. This video tutorial is one of the best I’ve ever seen! Great job!

@mr.3rdy240 Год назад

Hi did you ever make thor original hammer the one without the cracks.

@make432 Год назад

We had planned to, then Love & Thunder released and we changed plans, we are always trying to get more experience with lighting our props - so this seemed perfect! But we might to the OG eventually.

@craigyoung4068 20 дней назад

How did you get all the support material out of the cracks? I printed mine standing up with normal supports (probably should have used tree supports). And there is support material all through the cracks and it is not easy to get out of the cracks. Don't really want to do another 19 hour print.

@make432 18 дней назад

We did have this issues when we initially tried printing the hammer in FDM. We ended up printing in Resin - the supports came out much easier. I would think that using tree supports on an FDM printer might help though!

@craigyoung4068 18 дней назад

@@make432 thanks. Yeah I think I checked the print time for tree support and it was a lot longer.

@gabrieltan7687 2 года назад

can this project be done on an elegoo mars 2 pro?

@make432 Год назад

Sure! You will probably just have to slice the parts into smaller pieces to fit the build area.

@mikeb5258 2 года назад

How long is the rod you used?

@make432 2 года назад

18 inches!

@PauloRicardo-pp4ml Год назад

The led is white or Blue?

@make432 Год назад

The led is blue - we used these for our build amzn.to/3bi1JPv

@ffs-gaming2514 2 года назад

Link to the rod would be nice and fantastic print wish I had a resin printer big enough also to print but some parts maybe but fdm will have to do

@make432 2 года назад

This should do the trick! amzn.to/3Is7Ihj

@ffs-gaming2514 2 года назад

Ty sir appreciate next stop to print mine

@ffs-gaming2514 2 года назад

@@make432 what was the length you ordered if you don't mine me asking I'm trying to find something on amazon UK or ebay that link didn't seem to work for me

@make432 2 года назад

Sorry that was for the US, here's one that seems similar in the UK, www.amazon.co.uk/dp/B07W4C64MH/ref=twister_B07W4CHQMR?_encoding=UTF8&psc=1 We cut ours to 18" (or about 457mm)

@ffs-gaming2514 2 года назад

@@make432 ty so much for the help appreciate it BTW do you know if I printed this main part on the fdm would it need support because of the cracks or could I just print it without any support

@gemsleemiana567 2 года назад

Please do the new(multiverse of madness) scarlet witch tiara

@make432 2 года назад

that would be cool to revisit!

@tomastomas6626 Год назад

TOMÁŠ ♥️💪🍝⚡⚡⚡⚡

@make432 Год назад

⚡⚡⚡⚡

@forsakenace9577 2 года назад

Wish you guys sold the hammer itself instead of just the print file

@make432 Год назад

We could never give up this beauty haha.

@TwistedSag15 Год назад

Well you could always buy a printer and the file and manufacture and sell them yourself

@forsakenace9577 Год назад

@@TwistedSag15 I don’t have that kind of money

@MightyHeidi 2 года назад

it hurt watching you mask the handle. My least favorite part of making props. I hate it!!! Love this build, and the movie was amazing!! with Zeus being the best character xD Can't wait until your next project!!

@make432 2 года назад

Honestly it is the most stressful part haha.