No video :(

How to Access the P Settings of the TurboAnt X7 Pro Folding Electric Scooter

Подписаться 1,2 тыс.

Просмотров 31 тыс.

50% 1

Explore the P settings of the X7 Pro (👉 bit.ly/31iLPQu) and customize your fun ride! Check out the video and and figure out how to use it! From P0 to P4, there has to be one setting that makes your ride smoother and more fun!
CHAPTERS:
00:04 - Access P Settings of the X7 Pro
00:25 - P0 - Unit of Speed Measurement
00:34 - P1- Cruise Function Activation
00:58 - P2 - Zero/Non-Zero Speed Start
01:25 - P3 - Tire Diameter Change
01:43 - P4 - Sport Mode /Top Speed Adjustment
👉Here is a guide for the P setting:
There is 5 hidden mode in the menu setting: P0, P1, P2, P3, P4, To enter the P setting by pressing the function button and power button at the same time.
✔️P0: Change the mph to km/h
Step 1: Turn on the electric scooter, wait for a few seconds.
Step 2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds.
Step 3: Press the power button one time to lock the present mode at P0. Wait for 2 seconds.
Step 4: Press the function button one time, you can switch the speed from mph to km/h.
Step 5: Press the power button to exit present mode.
Step 6: Press the function button and power button at the same time to exit the menu setting.
✔️P1: Cancel or re-activate the cruise control
Step 1: Turn on the electric scooter, wait for a few seconds.
Step 2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds.
Step 3: Press the function button to choose from P0 to P4, when you want to adjust P1.
Step 4: Press the power button one time to lock the present mode at P1. Wait for 2 seconds.
Step 5: Press the function button one time, you can see the default parameter is 1, which indicates the e-scooter's cruise control function is open, you can press the function button again, parameter change to 0, which means to close cruise control.
Step 6: Press the power button to exit present mode.
Step 7: Press the function button and power button at the same time to exit the menu setting.
✔️P2: Change the speed to activate the e-scooter
Step 1: Turn on the electric scooter, wait for a few seconds.
Step 2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds.
Step 3: Press the function button to choose from P0 to P4, when you want to adjust P2.
Step 4: Press the power button one time to lock the present mode at P2. Wait for 2 seconds.
Step 5: Press the function button one time, you can see the default parameter is 1, which means the e-scooter will be activated when the speed is over 3km/h, you can press the function button again, parameter change to 0, that means the e-scooter will be activated at 0km/h speed.
Step 6: Press the power button to exit present mode.
Step 7: Press the function button and power button at the same time to exit the menu setting.
✔️P3: Change the tire diameter
Step 1: Turn on the electric scooter, wait for a few seconds.
Step 2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds.
Step 3: Press the function button to choose from P0 to P4, when you want to adjust P3.
Step 4: Press the power button one time to lock the present mode at P3. Wait for 2 seconds.
Step 5: Press the function button one time, you can see the default parameter is 10, which means the escooter will be used at 10-inch tire diameter, you can press the function button again, parameter change to 85, which means the escooter will be used at 8.5-inch tire diameter.
Step 6: Press the power button to exit the present P3 mode.
Step 7: Press the function button and power button at the same time to exit the menu setting.
✔️P4: Change the top speed of sport mode
Step 1: Turn on the electric scooter, wait for a few seconds.
Step 2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds.
Step 3: Press the function button to choose from P0 to P4, when you want to adjust P4.
Step 4: Press the power button one time to lock the present mode at P4. Wait for 2 seconds.
Step 5: Press the function button one time, you can see the default top speed of sport mode is FF, which means the scooter will be used at a top speed of 32km/h; you can press the function button again, parameter change to 25, that means the escooter top speed will be limited at 25km/h; you can press the function button again, parameter change to 20, that means the scooter top speed will be limited at 20km/h.
Step 6: Press the power button to exit the present P4 mode.
Step 7: Press the function button and power button at the same time to exit the menu setting.
FOLLOW US:
/ turboant_official
/ turboant

Опубликовано:

17 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@cc-kb5ic 2 года назад

I'd nearly given up on looking for a good e-scooter and I come across this from a advert on Instagram, everyone in the UK seem to have the same scooter but 8.5" tires was not my thing and I've heard a lot about popped tires so I decided to take a chance and buy this. I've seen many videos now and I'm very impressed, I've not tried mine yet as I only received it yesterday and I must say very fast delivery I was really impressed 👍 This video has been very helpful as I was confused what the P menu was for, I am very excited to trying this out. I just hope in the future they become legal in the UK as I work nights and considered as a priority worker and struggle to get to work, it is the reason I bought one. Plus I'm not a big fan of bikes. Anyway Thanks again for the videos on your RU-vid channel they have been very helpful

@TurboantOfficial 2 года назад

Thank you very much for this feedback! We'll work harder to bring better products, also more tutorials.

@Gmiah08 2 года назад

Great job 😀👍 thanks for sharing.

@SlinderPigGaming22 2 года назад

cant wait to get our bundle we ordered so exicted for it owo

@luxuryxnoah2059 2 года назад

Thx

@stephenblakey4913 Год назад

How long do you hold the power and function button down for? Also is the scooter on or off when you do this? Please.

@user-jg4vw2dx2t Год назад

What do I do if I can’t go to p4 setting

@chuckwarchild3150 2 года назад

Anyone know where to get an inner tube for the X8. Crusher don't support this anymore. I never knew getting a 10.2 with the 45° stem would be almost I'm possible to find 😠😠😠

@dofke564 Год назад

Is the original setting on p3 10 or 85?

@phantomloard0138 11 месяцев назад

so im just wondering do you know how to fix a battery that just kind of shut off the charger is green and working but the actual battery wont turn charge for some reasone

@Nitrous-ej5zy 2 года назад

Ok finally got mine today!!! Have my settings dialed in, and am ready to go.......NOWHERE!!!! Not because there's something wrong with it, but because its like 15°F and I don't wanna get salt all over it. Not to mention plastic parts and cold don't go well together. So I'm playing it smart. I've waited this long, what's a few more weeks?....

@PigsTravels 10 месяцев назад

What does 20 and 25 mean you didn't explain that

@-w-1870 Год назад

Mine doesn't have a p4 and won't go over 6mph. Help :(

@georgemanjarrez 2 года назад

Am I able to replace the tires for solid ones? I've already had to replace both of my inner tubes in the 3 month and now I'm on my third.

@TurboantOfficial 2 года назад

Hi George, if you need replace for solid tires, we recommend that you find a repair shop in your local place to help you deal with the replacement.

@resonantconsciousness9248 2 года назад

So (P3) is the wheel size in inches, dose this affect the speed in anyway? I have 10inch tires, with it set to "10" or "85" it makes no difference in feeling of speed or displayed speed. I wouldn't of thought it affect the displayed speed but the actual speed i would of thought it would go faster with the "85" selected with 10 inch tires it would trick it into thinking it was going slower?

@TurboantOfficial 2 года назад

Hi there, thanks for your question. - The speed will be slightly different in LED display and the actual use, but overall it's the same. - We highly recommend keeping the original setting to avoid damage to the motor and controller due to a wrong setting (i.e. 10'' tires and 8.5'' setting or vice versa).

@MyLifeAsJA 2 месяца назад

How can I get access to the P settings in a V8 scooter?

@hemenkareamg6957 Год назад

Anyone know about turboant v8?

@skyebrielle2179 2 года назад

How do you get rid of the red key symbol on the display? The scooter won’t go while this is on and not sure why it came on or how to turn off.

@abdulalali590 2 года назад

did you fix this issue?i have the same

@nicolenelson6510 Год назад

Hey there is there some way to adjust the setting so it doesn't beep? It seems to constantly beep above around 14 mph.

@ArcticJS Год назад

I believe that's part of cruise control. Every time cruise control engages it makes that sound, and when the speed is changing, but it's trying to engage cruise control still, it'll just keep beeping. You can turn off cruise control following the instructions in the video, or just let go of the throttle when its beeping and you're at your desired speed.

@nicolenelson6510 Год назад

@@ArcticJS thanks I'll give that a try!surprised I haven't seen it mentioned yet as it's a very obnoxious feature 🤣😁

@columbuscalvin8520 2 года назад

I'm not sure if I changed the P2 (start) setting or not. Should this be on one setting versus the other?

@TurboantOfficial 2 года назад

P2: to change the speed to activating the escooter step1: Turn on the electric scooter, wait for few second. step2: Press the function button and power button at the same time, you will enter into the menu setting mode. Then "P0" will show on screen, wait for 2 seconds. step3: Press the function button to choose from P0 to P4, when you want to adjust P2. step4: Press the power button one time to lock the present mode at P2. Wait for 2 seconds. step5: Press the funtion button one time, you can see the default parameter is 1, that means the escooter will be activate when the speed is over 3km/h, you can press the function button again, parameter change to 0, that means the escooter the escooter will be activate at 0km/h speed. step6: Press power button to exit present mode. step7: Press the function button and power button at the same time to exit the menu setting.

@columbuscalvin8520 2 года назад

@@TurboantOfficial I still don't know if one setting is better than the other, but I decided on kick start rather than zero start.

@TurboantOfficial 2 года назад

@@columbuscalvin8520 The default settings are generally intended for security purposes. Set it up as you like.

@ERealxlENT 2 года назад

The p4 doesnt remove the speed blocker does it? The scooter will still go 20 mph?

@TurboantOfficial 2 года назад

The best speed is 20mph, the 20/25 units shown on the P4 are km/h

@crevans6724 2 года назад

What difference will altering the tyre diameter make

@z1ggz900 2 года назад

it’s to measure the speed you going as different tyres go round at different speeds due to their increased/decreased size

@dannyphillips5865 2 года назад

I got my turboant today and it wont turn on. Any help

@bigboi9856 Год назад

support

@gteamtv4625 2 года назад

Hey my front tire air value keeps hitting the piece that holds the wheel how do I fix this. Do I have to replace the inner tube

@TurboantOfficial 2 года назад

Maybe it's the valve that hit the position that holds the wheel. You can adjust the position of the valve and it should be fine.

@gteamtv4625 2 года назад

Do I got to buy a new tire because it’s still making a noise when I ride

@TurboantOfficial 2 года назад

@@gteamtv4625 If it still has the problem, you can contact our customer service.

@nadmanahmed5905 2 года назад

@@gteamtv4625 I had the same problem bro just try tucking the valve in as much as u can and loosen the screw that the valve is hitting everytime it spins

@workofdavidross 2 года назад

How do you stop the stem from creaking while you ride it?

@tehakibriak1216 2 года назад

It probably squeaks because the battery inside is slightly loose. Maybe if you stuck some thin foam inside to make it a tighter space or something, that could help with reducing the creaking/rattling sound?

@danieljwillen1993 2 года назад

put grease or lube all over the contact points that can potentially rub. even go as far as taking the metal lock piece off and putting lube in there. there's a spring though so be careful and also remember the orientation of the metal piece. I saw this on a video a while back and it seemed to do trick.

@gmendez694 Год назад

Does the X7 Max not have a P4 setting for speed?

@TurboantOfficial Год назад

X7 Max has the P setting but not has P4 setting.

@miloa.2684 3 года назад

What’s the tire diameter for?

@TurboantOfficial 3 года назад

Just in case, when you can't find a standard 10-inch tire replacement, you can size the tire to an 8.5-inch by setting up. But 8.5 inches is not the standard use size for this e-scooter, so we strongly recommend that customers use the standard 10 inch tire and not change the settings.

@estebanhidalgo7221 Год назад

How do you turn on the head light?

@TurboantOfficial Год назад

Press the function button twice quickly to turn the headlight and taillight on/off.

@GabrielOliveira-km4pj 2 года назад

What does the cruise control does?

@ahren5510 2 года назад

once you hit a certain speed and hold it for 5 or six seconds it automatically maintains that speed so that you can release the throttle and rest your thumb

@ps5stuffguy 2 года назад

Turn it off

@christinasivesind1765 2 года назад

How do you turn on the headlight! No one tells you and it never comes on for us?

@Acepbgjewellers 2 года назад

Same I don’t have a clue

@TurboantOfficial 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-niwAhmh6Xz4.html Hi, here is the video at 0:41 will show you how to open the headlight. Thanks for your precious feedback.

@TurboantOfficial 2 года назад

@@Acepbgjewellers The function button should be pressed twice quickly to turn on the headlamp.

@HorizonMicromobility 2 года назад

@@Acepbgjewellers double click the Power button

@hurdygurd 2 года назад

triple click the on button

@retro-stars2630 2 года назад

How do u turn of the beeing

@TurboantOfficial 2 года назад

Hi there, the beeping sound could be caused by different factors. Could you please describe more details (e.g when and how the beeping happened), so that we can help?

@retro-stars2630 2 года назад

@@TurboantOfficial when I receive it from being repaired from swagtron I put it together the electric scooter trim it on it there was a beeping sound nun stop

@TurboantOfficial 2 года назад

@@retro-stars2630Hi, please send clear photos and/or video to show the product issue to support@turboant.com, and our cs reps will help you with more information. Please also explain how it was repaired by another brand and how you put it together yourself, which will better help us provide solutions. Thanks!

@retro-stars2630 2 года назад

@@TurboantOfficial ty but I already send back to get fix free from swagtron Monday morning

@JahanRashid1 Год назад

How to turn on lights?

@spklit2101 Год назад

press the gear button 2 times

@85liez35 3 года назад

Wait, wasn’t FF the fastest speed to 20mph? What dose 20 and 25 means? Is it km?

@TurboantOfficial 3 года назад

Hi, thanks for your good questions! You are right, the FF the fastest speed is to 20mph. And 20 and 25 means km/h.

@darrinmarchand2092 2 года назад

@@TurboantOfficial Sorry to correct you its 32.19 kmph for 20 mph. I just got mine, 160lbs rider mine did 20 mph no problem. Flashed 21 then I felt it back off to 20. Cruise mode held 20 no problem, with flashes of 21. Very disappointed there is no odometer, can't tell the range or even guess how far I could go yet. Going by riding time, and so far half hour jaunts, at mostly full out took only 1 bar. Keep in mind rider weight. And it went up a hill 25 degrees at 16 mph, not to shabby.

@ForcingShots 2 года назад

@@darrinmarchand2092 how many miles did you get on sport mode? Also, do you think by getting the replacement battery, I can get more mileage?

@wiffleballsports7647 2 года назад

That’s what I’m wondering

@bigboi9856 Год назад

@@ForcingShots obviously yes if you have a whole second charged battery you can swap it out

@mcdsflag 2 года назад

This should be in the user manual. Why isn't it?

@TurboantOfficial 2 года назад

Hi Mark, we think an instruction video will be easier and more helpful for users to get the hang of it quickly. But thanks for your suggestion! We'll consider renewing the user manual with the P settings.

@bigboi9856 Год назад

@@TurboantOfficial what about all the people who would never think to look this up and just never switch any of the modes

@Zaloomination Год назад

wait, so you can customize it to go up to 25 mph? 2:05 edit: maybe the settings are to km/hr? 25kmh=15mph

@TurboantOfficial Год назад

This model cannot be customized to go up to 25 mph.

@chrispee5786 Год назад

@@TurboantOfficial mine used to top out at 32kph but i had to replace my controller. and now i cant get it to go over 25, not sure why. i have it in FF as you showed in the video too. any tips?

@TurboantOfficial Год назад

@@chrispee5786 We suggest you contact Customer Service via support@turboant.com.

@rahmanenam 2 года назад

How to reset all setting

@TurboantOfficial 2 года назад

To enter P setting by pressing the function button and power button at the same time.

@ragedbroyt5619 3 года назад

Mine won’t turn on what do I do

@TurboantOfficial 3 года назад

Have you mailed to our support team? They will help you out.

@hurdygurd 2 года назад

charge it

@Leon-lb4xq 3 года назад

when i tried to change the top speed the top speed changed from 20mph to 15mph.. what do i do?

@TurboantOfficial 3 года назад

Thanks for the feedback, can you mail to our support? Can you show us a video via Facebook?

@ps5stuffguy 3 года назад

Change it to FF

@ps5stuffguy 3 года назад

The battery has to be fully charged for 20mph I think. I got mine today

@TurboantOfficial 3 года назад

@@ps5stuffguy Thank you so much for sharing this.

@andreabeaulieu83 2 года назад

How do we TURN OFF the auto cruise control? It’s making the scooter dangerous that it auto engages!!

@TurboantOfficial 2 года назад

You can brake or accelerate, and the cruise control will be turned off.

@The_Brew_Dog Год назад

They also explain exactly how to turn the cruise control off all together in the video.

@ryanpjk-sproule3813 2 года назад

SAME for X9 is it ?

@TurboantOfficial 2 года назад

Hi Ryan, we do not have an X9 model. What X9 are you referring to? Please provide more info so that we can help.

@felixkrog374 2 года назад

P3 and P4 doesn’t show up, but the other do? Help?

@TurboantOfficial 2 года назад

Hi, please contact us via email: support@turboant.com. Our customer service will help you.

@Datkush-oi6rf 2 года назад

me to ;'(

@teachmespidi6670 2 года назад

How i can close settings menu?

@TurboantOfficial 2 года назад

Are you trying to turn off the menu settings during operation?

@teachmespidi6670 2 года назад

@@TurboantOfficial yea how

@TurboantOfficial 2 года назад

Press the power button and the function button at the same time for more than two seconds to enter the setting, and then press these two buttons for more than 2 seconds at the same time to exit the setting mode.