Тёмный

How to add a Battery Cut off to a Classic Mini 

Classic Mini DIY
Подписаться 30 тыс.
Просмотров 28 тыс.
50% 1

❱❱ Supercharger Giveaway - merch.classicminidiy.com
All purchases on the merch store enter you to win a @VMAXSCART supercharger.
❱ Patreon - / classicminidiy
❱ Shop - merch.classicminidiy.com
❱ Seven Mini Parts - bit.ly/7evenmini
❱ Instagram - / classicminidiy59
❱ Facebook - / classicminidiy
❱❱ Address for Mail Time:
6241 South Blvd
#241403
Charlotte, NC 28217-4157
❱ Parts in this Episode:
Battery Cut Off Switch 1 - cmdiy.co/2xV27jR
Battery Cut Off Switch 2 - geni.us/GLtDj (Amazon)
Battery Terminals - geni.us/QqQVaCW (Amazon)
Battery Leads - geni.us/tFzg29 (Amazon) Thanks for watching Classic Mini DIY! Please note Classic Mini DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Classic Mini DIY recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Classic Mini DIY, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Classic Mini DIY. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Авто/Мото

Опубликовано:

 

10 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@timsminigarage
@timsminigarage 4 года назад
Nice one Cole! I did this to mine after the GPS fell off the windscreen one night and turned on the headlights!
@riczito
@riczito 4 года назад
It's good you mentioned the extra cables at the end. The problem with so many cutoff switches is that you lose all the radio stations and clock settings every time, which is a complete pain. Your system (and the system I have on my Mini) allows for this, with a jumper lead to the radio that remains permanently on, even when the battery is turned off.
@timsminigarage
@timsminigarage 4 года назад
ric zito that’s a fancy mini you’ve got there with a clock and a radio 😀
@Dagowly83
@Dagowly83 4 года назад
Nice little install there mate 👌
@classicminidiy
@classicminidiy 4 года назад
Thanks 👍
@randycarrillo2802
@randycarrillo2802 3 года назад
Can I connect my positive and negative terminals from trolling motor to the battery terminals that are running to this so it kills the power ?
@mototrxsr3846
@mototrxsr3846 9 месяцев назад
So you have 2 wires coming from the switch.i see one going to the negative of the battery.where is the other wire from the switch leading to?
@dantschneider
@dantschneider Год назад
What size drill bit to fit the bolts to the body?
@melvis2017
@melvis2017 Год назад
I so only one black cable that's the negative how about the plus cable. Please can you explain it and demonstrate it the wirring
@Chuby123
@Chuby123 4 года назад
If your going to put in the boot, I’d just use a screw on battery connector which makes it impossible to start unless you have the screw. Far cheaper and simply requires one bolt to be fastened
@classicminidiy
@classicminidiy 4 года назад
Both are great options. I had the screw on. Lead for a while and it work well. I like the look of the switch better and it was only about $5 more expensive.
@kultur39
@kultur39 4 года назад
I have a screw type one on mi 91 mini... I have a 40th anniversary and planned tondo the same but I was advised not to as the ECU will suffer
@ecotransaustralia
@ecotransaustralia 2 года назад
You should get a multimeter and see if your body is still grounded with that switch off. If your amp, fuel pump, radio or whatever else you have running direct off the battery terminal is grounded to the shell/subframe you will quickly destroy those electrics if you forget to turn that switch on before trying to start.
@JethroBronner
@JethroBronner 4 года назад
Whenever I park my Alfa in a bad part of town I remove the fuse for the ignition circuit, just in case.
@classicminidiy
@classicminidiy 4 года назад
Oh that’s clever. Are your fuses in the cabin or engine bay?
@Timtravels414
@Timtravels414 Год назад
What battery is this? I just did a battery swap and now my mini will not start.
@MrGadgetMotorCo
@MrGadgetMotorCo 4 года назад
Hey I have something to ask.. my mini's battery dies if I dont drive my car for about 3days.. but If i run it daily, it wont happen.. what could be the reason for this?? If there is a short circuit, how can I find it?? Will fixing a switch like this solve the problem? And one thing, any reasons why we fix this switch to negative terminal ?
@timsminigarage
@timsminigarage 4 года назад
Mr. Gadget Motor Co I’d think it’s either a dying battery or a circuit is using power with the ignition off. You can test it by taking off the negative battery lead next time you park it and see if that helps. You can also take the battery to a battery shop and they can test the condition of it. Isolators are nearly always fitted to the earth/negative terminal - one reason being that if something metal touched the earth strap or terminal nothing bad will happen
@sailorbrand4957
@sailorbrand4957 4 года назад
by my car it was the same. The switch has solved this problem.
@paulhotson5820
@paulhotson5820 4 года назад
Do a Parasitic Battery Drain Test
@regcotterill7332
@regcotterill7332 4 года назад
The factory fitted alarm system will drain the battery if you still have that fitted.
@MrGadgetMotorCo
@MrGadgetMotorCo 4 года назад
Thanks everyone
@hgte36
@hgte36 4 года назад
why would you mount it on the floor where its going to get broken every time you put something heavy in the trunk
@classicminidiy
@classicminidiy 4 года назад
Why would something heavy break it? The boot board sits on top of brackets that lift it above the switch.
@msi4226
@msi4226 2 года назад
can this be use for motorcycle?
@classicminidiy
@classicminidiy 2 года назад
Yeah should be usable on any standard amperage 12v application.
@sailorbrand4957
@sailorbrand4957 4 года назад
Nice. I did the same before. But i think you made a mistake. To switch off the switch, you have to open the floor of the trunk. Thats annoying. A better place ist the sidewall of the trunk furniture.
Далее
battery DISCONNECT KILL switch installation
9:24
Просмотров 11 тыс.
когда мучает жажда // EVA mash
00:58
Просмотров 1,1 млн
Easy RV Battery Cutoff Switch -Install / Upgrade
13:48
Quick Tips - Jacking Up your Classic Mini
8:39
Просмотров 35 тыс.
How to wire a Relay and Why You should use them.
19:32