There's an even easier way. Hook the buttons up to a dispenser with powder snow, make sure there is space for the powder snow to be dispensed. Use a comparator, then 3 pieces of redstone dust, then a repeater. When you press the buttons the powder snow will be placed or picked up and the signal strength of the dispenser will change.
after connecting the buttons to the 3x3 door, the last two pistons fail to reach up and grab the last block to open it. It closes just fine though. I did change those two repeaters to 3 ticks
Wow was just thinking on how to improve my entrance very easy and couldn’t cause I suck so turned off my Xbox and opened yt and this is the first video I see😂
The easiest way is make a dropper facing up directly into another dropper which facing into the side way and place a hopper facing into the lower hopper a coparator on the hopper (not facing into the dropper) fill the upper dropper with a wooden shovel (can be any item that does not stacks) and place a block next to the lower dropper a repeater on that block and a wire of redstone linking into both of your button
That’s the way most people like to do it, but idk why but it just never works for me hence why I go this route, in the latest update you can just use a copper bulb tho which is much easier
Amazing tutorial, everything worked perfectly fine and I understood everything. Tho idk how to put the button on the wall in a 3 by 3 door without it activating one of the piston. Edit: never mind i figured it out.
I tried doing this with a redstone thingy- it doesn’t work. I used your 3x3 redstone tutorial, but instesd of it being a 3x3 its a 2*1, yk, the middle piece. It works perfectly fine with a lever, but buttons just don’t work the way you showed it. It could be because i changed the design, but i wanted a 2x1 piston door that went up, instead of from the sides, but i couldn’t find any
When I open the door the block that is under the middle block of the closed door doesn’t get pulled quick enough by the piston on the left because that piston and the piston under the middle bottom block move at the same time and then the middle block ends up at the top how do I fix this?
2:20 but what if it DOESN'T work? I tried to do this to your 3x3 flush trapdoor, but replacing the lever with a repeater does nothing. I tried replacing the lever with redstone dust and running a repeater into it, but that caused the door to close only halfway. (The blocks were pushed together, but not pushed back up.)
Uh why is this a diff door??? When you showed how to make a 3 by 3 door it looks nothing like this door in the vid. And in that other vid you opened it with buttens??
Oh ok well i figured it out but now im trying to cover every thing and for some reason when i place a block next to some red stone dust the door moves one of the block to the middle and it stays there. Im useing dirt, also at the bottens there is red stone dust on top of it so i cant place a block to fill it, but you somehow did.. idk how to fix any of that so can you tell me how to fix everything?? Or try to make a video about it?
@garyndoriburdine5148 I don’t really understand what you mean sorry, do you have discord or Twitter so you could possibly send some photos of your issues?
Tell why it does not work, like what went wrong after you built it. Next time if you made something from tutorial does not work, tell them what happened after you built it, maybe something is wrong.
![How to ADD BUTTONS to ANY Door! [Minecraft Bedrock 1.21]](/img/logo.svg){kind=logo}
