How to Add Hazard Lights / 4 Way Flashers to a Turn Signal Circuit. Hotrods | Cars | Motorcycles

Подписаться 96 тыс.

Просмотров 84 тыс.

50% 1

In this video, I show you how I would wire hazard lights (4-way flashers) into an existing turn signal circuit. This could be used for a hotrod, car, truck, motorcycle, ATV, dirt bike, side by side, go cart, or whatever kind of vehicle needs working hazard lights. There are many different methods of wiring 4 way Flashers, Hazards, and Turn Signals, but I prefer to wire them as I describe in the video because I feel like it is a safest method. Below is a list of the relays, the non-LED turn signal flasher, fuses, the incandescent 1157-style bulbs, 1157 style bulb sockets, and the 3 way toggle switch I used to make the entire circuit work properly.
Items used in this video (You may not need to buy in these quantities, but I did.)
🔗 5 Pack of 5-pin Bosch Style Relays - amzn.to/2OfiwXT
🔗 10 Pack of Fuse holders - amzn.to/3cU4CoD
🔗 6 Pack of 1157 Bulb Sockets - amzn.to/3jtztJU
🔗 Double Pole Single Throw DPST Switch - amzn.to/3ozTGlM
🔗 3 Way Toggle DTSP Switch (Double Throw, Single Pole, not-momentary) (Diff brand than video) - amzn.to/3abAeDw
🔗 10 Pack of 1157 Bulbs - amzn.to/3a1Wa4N
🔗 2 Pin NON-LED Turn Signal Flasher (Diff brand than video) amzn.to/2YXOslJ
🔗 272 piece fuse variety pack amzn.to/3k48cNt
*As an Amazon associate I earn from qualifying purchases.
➡ This is my video on how to wire the turn signal circuit used in this video:
• How To Wire a Turn Sig...
➡ This is my video on how to choose the right fuse and wire sizes when building a circuit: • What Size Fuse and Wir...
🔔 Subscribe to This RU-vid Channel: www.rattymusclecar.com/Subscribe
🔔 Follow me on Instagram: @Ratty_Muscle_Car www.rattymusclecar.com/Instagram
🔔 Join me on Facebook: www.rattymusclecar.com/Facebook
Tags:
#Hotrod
#Wiring
#WiringRescue
#Automotivewiring
Please Note: This video description contains affiliate links, which means that if you click on one of the product links above, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you kindly for your support!

Авто/Мото

Опубликовано:

3 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 274

@WiringRescue 2 года назад

Thank you for watching the 4 WayFlasher video! Subscribe To This RU-vid Channel: ru-vid.com See My Wiring Playlist: ru-vid.com/group/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

@williamwebb6289 2 года назад

Question. What would make my hazards alternate?

@Stacy_Smith 2 года назад

Dude this video would be way easier if you would've shown a wiring diagram that we could pause and screenshot.

@WiringRescue 2 года назад

@@Stacy_Smith - I unfortunately don’t have diagrams for these because I just make these circuits up based on what I think people will find useful. It is something that I am very much considering creating though, because you’re right that it would be awesome to screenshot. Thanks for watching and I’m sorry I couldn’t be of more help!

@Stacy_Smith 2 года назад

@@WiringRescue Use colored pencils

@explorer8888 6 месяцев назад

Awesome video and easy to understand! Subscribed!

@JerryRigEverything 2 года назад

Yessssss thank you.

@WiringRescue 2 года назад

@JerryRigEverything - Happy to help! Also - your content is AWESOME!

@chrisx112x 2 года назад

Let em guess is for the electric hummer?

@alanhovious3160 2 года назад

All of your electrical DIY wiring are great. Using the visual board makes what you’re teaching easy to follow and understand.

@WiringRescue 2 года назад

Thanks! I’m glad you like the videos!

@edwardklein9146 2 года назад

Thank you making a somewhat complex issue understandable by breaking it down to its components. I had to stop the video many times to digest the pathways involved and refer to the common labeling of an electric relay. Well done.

@Ed-de3ro Год назад

One of the best videos in wiring a four way flasher. The instructions are very easy to follow and very well explained. Thank you for sharing.

@steves835 2 года назад

I'm rebuilding a 1960's muscle car with no hazards, and was wondering if I should install some, but didn't have the confidence to get it done. 5:51 later, now I do. You rock!

@WiringRescue 2 года назад

That’s fantastic! Thank you so much for watching and letting me know it was helpful!

@PeckerwoodKustoms Год назад

This is REALLy handy to know...elbow deep in rewiring my 68 Barracuda and these videos are proving invaluable

@WiringRescue Год назад

Excellent! Thanks for watching and good luck with the Barracuda project!

@vladimirtomic 16 дней назад

I have almost zero knowledge of electronics and I wanted to learn something by building a simple toy for my kid. I planned to use two groups of three red blinking LEDs each for "turn signals" and three white LEDs for "headlights". I also wanted to add a couple of green blinking LEDs for the signal lights on the "dashboard" when the blinkers are on, and one blue LED for the indicator that the headlights are on. Each group of turn signals would have one switch (single throw), there would be one more for the headlights and maybe one "main" switch for the whole circuit. I also wanted to add one more LED which would be on whenever the main switch is on. So in the last few days I've been browsing youtube for useful tutorials and that's how I found this one. And I like it :). Since I have an issue with my LEDs blinking at different frequencies (and I have no idea why that's happening), I'm now thinking about using relays and making something like you did in this video.

@shovelheadpec 2 месяца назад

This is exactly what I want to do for my old harley Thanks Young man

@WiringRescue 2 месяца назад

You’re very welcome. I have a few videos showing a few different way to wire this same circuit. Check em out and find the one that works best for you. The wiring playlist I have is probably the best way to find them. Thanks for watching and good luck with the Harley!

@Wandering_Horse 2 года назад

Thanks, just the clarity I needed. Working on wiring from scratch using a french combo twisty push stick that is headlights, park lights, flash to pass, turn signals and horn! The original hazard had 10 wires and trying to integrate all of this into a 21 circuit painless wiring harness in a french motorhome that has been completely stripped! The wiring diagrams were written by a french man drunk on red wine and you would have better luck trying to crack the code of the german enigma encoder from WWII !

@WiringRescue 2 года назад

LoL. I'm glad you're working on that and not me! Thanks for watching the video!

@ksmannie4196 2 года назад

I very much appreciate all your wiring instructional videos. I have found them invaluable. I'm working on a 1972 Ford F100 in which the turn signals work great but the hazard flashers don't blink and stay on constant. It looks like the simplest solution would be to add a flasher relay to the hazard circuit. All lights are LEDs so the installed and additional flasher relays are specifically for LED bulbs. It's never a dull moment. LOL

@WiringRescue 2 года назад

It sounds like you’re on the right track for sure. The hazards and turn signals often have separate flashers because the hazard circuits have power 24/7. The turn signals only have it with the key on. Good luck! I’m cheering for you!

@ksmannie4196 2 года назад

@@WiringRescue Thanks!

@prodriveawayman6943 2 года назад

I will send people your way! There is so many people who need this video! Thank you so much!

@marklee3581 2 года назад

Great video, you explain every detail so good and simple speaking for anybody to understand, you don't skip nothing, and you even repeat things to make sure we don't mess up or get confused. You explain great and simple!

@WiringRescue 2 года назад

Thank you! I really appreciate that! If you haven’t already checked out my other wiring videos, you may like those as well!

@scratchbuilder101 2 года назад

I have never binged someone's videos like I have these wiring series vids!!!! So clear and easy to understand!! THANK YOU!!!

@WiringRescue 2 года назад

Haha! Thank you! Tell your friends to watch too! I’m glad your enjoying them!

@alark79 Год назад

Thank you! Got flashers installed in my antique tractor this evening thanks to your assistance.

@WiringRescue Год назад

That’s outstanding! Nicely done!

@steamy1225 2 года назад

Now that makes sense . Wasn't sure how the big car manufacturers wired up the hazards to the turn signals . Now I know. Pretty clever.

@WiringRescue 2 года назад

This actually Isn’t how all cars are done. This is just how I do it sometimes. There are probably dozens of methods. I’m actually making another video now of another option. So stay tuned!

@robertmccully2792 2 года назад

Love your wiring videos , thanks for making them for us.

@WiringRescue 2 года назад

Thank YOU for watching them! I really appreciate it!

@JawadAhmadsahibzada 2 года назад

for me who never wired before, i learned 100% - perfectly explained

@mackellyman5642 Год назад

Dig the hands-on demonstrations. So easy to get confused if a person doesn't drill down on the flow of electricity.

@johnlupo9577 2 года назад

Great. I want to add hazard lites to my motorcycle. Thanks for a great video.

@chrisx112x 2 года назад

Loving these i was looking to make a turn switch for my electric scooter and this is one of the best so far!

@chrisx112x 2 года назад

The only thing left would be to add a dc voltage converter

@WiringRescue 2 года назад

I’m glad you are enjoying the wiring videos! Good luck with your scooter project!

@davidpost6444 2 года назад

It is so good to see actual application of the connections as you have done on the peg boards. Clear concise and to the point. Quite easy to understand even for a non-mechanical type as myself. *btw* super fast reply to my other comment, ya musta been sittin there waitin on my message ... lol

@WiringRescue 2 года назад

Haha. I’m trying my hardest!

@davidpost6444 2 года назад

@@WiringRescue I have a special request for a video. How to wire a fuse panel. Sounds simple enough, and for a simple mind like mine it is difficult to digest.

@royrodriguez5390 2 года назад

Love all your videos ! I would love to see you make a video with everything put together for lighting. So headlights, turn signals, hazards, high and low dim all in one.

@WiringRescue 2 года назад

I will definitely be doing that, I’ve just been doing a bunch of winter prep on my garage recently so I don’t freeze to death this winter! Once that’s done - more videos!

@fleetwood9142 Год назад

I totally agree 👍 👌 super clean electrical live diagrams ..

@werekief29 7 месяцев назад

@@WiringRescue I'm following specifically for this, thanks!

@wlindenlaub 2 года назад

This is exactly what I needed. Thank you!!

@WiringRescue 2 года назад

Excellent! I'm excited to know that it is helping you out!

@victorfronkiii8261 8 месяцев назад

Wow. Great information. Was wondering about a few of these tasks. Shouldn’t be to difficult to follow along and replicate what you’ve presented. Thanks

@WiringRescue 8 месяцев назад

I’m glad you found it helpful! Thanks for watching!

@justinhobart8747 2 года назад

Very informative... Along with your last one with how to wire turn signals, easy to follow and understand,😉👍 this Hazard video maybe even make me think about adding hazards to my classic motorcycle that didn't have them originally it only had turn signals. My only question is now how about an explanation of how to isolate that circuit for brake lights if you use the white wire we're not supposed to be minding for running lights/tail lights or parking lamps, how do you wire the brake lights up with the turn signals and isolate front for back?

@satpalsidhu1236 Год назад

It’s very informative thanks.

@djperry6787 Год назад

Thanks for you help! Adding E flashers to an old truck that only has turn signals.

@tylersparling3784 2 года назад

I’m getting ready to rewire my 81 delorean, these videos are a God send thank you sir well done!

@WiringRescue 2 года назад

There are many ways to do it! Be sure the pick the one that is best for you! :)

@werekief29 7 месяцев назад

Thank you so much for this.

@jaket418 2 года назад

I’ve been working on a new a project recently and all of its problems are electrical. The hazards work but the blinkers don’t. I’ve tested fuses, installed a new switch, and spent hours trying to fix it. I’m gonna just build my own circuit like you did in this video and hopefully it work. Thanks again for the help.

@WiringRescue 2 года назад

Awesome! Check out this video, it may help you even more. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Io_i9016o10.html

@chauvinemmons 2 года назад

Thank you thank you thank you. My only suggestion is you forgot to mention that if would put that wire for the flasher to the accessory side of the key it will always work as it should

@edwinq6528 2 года назад

Great job man 😎

@WiringRescue 2 года назад

Thank you! I’m glad you liked it!

@AreeVee 2 года назад

Great Video Dude I'm Planning To Put Something Like This On My Go Kart

@WiringRescue 2 года назад

That sounds like an awesome project! Good luck and thanks for watching!

@AreeVee 2 года назад

@@WiringRescue Thanks man you're videos are always fun!😉😁

@michaelpuno4231 2 года назад

Very well done Thank you

@WiringRescue 2 года назад

Thank you for watching!

@JoedeKlerk-bt3nc 2 месяца назад

very informative thanks!

@WiringRescue 2 месяца назад

You're welcome! Thanks for watching!

@JohnOates-v4d 23 дня назад

Great, thanks, I’m fixing my Hino bus project, so many people have played with it, can’t get the original system working because of all the botching up under the dash 😠 Your system to me looks very doable for me a mechanic & not an auto electrician 😊👍

@estebanpelaez2931 2 года назад

Great video, thank you! Question, how do you make the circuit work with existing lights? Hazards and turn signals stopped working and I think adding this circuit to the existing lights would be easier than finding what the problem is. Any ideas?

@The420Monique 2 года назад

Thank you needed new Hazzard lights in my 66 mustang

@PVT_Barry 11 месяцев назад

Thanks. Used this on my tractor.

@WiringRescue 11 месяцев назад

Heck yes! Thanks for watching!

@mossymountainbikeworks Год назад

Thanks and praise. Subscribed, liked, commented.✅

@WiringRescue Год назад

You rock! Thanks for being awesome!

@jasonvito2367 2 года назад

very informative.. thanks...

@WiringRescue 2 года назад

I’m glad you liked it! Thanks for watching!

@eaglemax 7 месяцев назад

thankyou. My Honda Fury needs a flasher as it will become a trike. useful

@edwardoe6012 2 года назад

Nice and simple

@WiringRescue 2 года назад

Thanks! I’m glad you enjoyed it.

@mitoproductions9666 Год назад

Great video

@WiringRescue Год назад

Thank you! I appreciate you taking the time to watch!

@hugoortiz05 Год назад

Love the videos! Only missing the dash indicators

@chepearrieta9613 Год назад

Thank you so much for your help you are #1

@WiringRescue Год назад

You’re welcome! Thank you for watching the videos!

@orldmunoz88 2 месяца назад

A million thanks ❤❤❤❤❤

@WiringRescue 2 месяца назад

You’re welcome! Glad you enjoyed it.

@tonymontana4349 2 года назад

Great video yet how do u power up the parking lights using this setup on. A Ford Mustang rear harness thanks

@MrZzz877 Год назад

Good idea but my motor cycle I will just complete the two white wires from the turn signal with an on off switch. Then when you activate turn signals with the on switch both relays will work. Turn the switch off back to turn signals only. Great video.

@robxavier 2 года назад

Im working on a 1966 Ford thunderbird that came with sequential turn signals. I have regular light from the light switch and also the brake lights work. I'm trying to figure out a way to hook up Led sequential lights. So far I have used your method to create the one side of the turn signal with the led flasher which works great. Im sure using the method above will work for both sides. How can I make a pause between each of the the 3 rear left and right light bulbs. Each are 1157's So there are three 1157's on the right side and 3 1157's on the left side. I would imagine it would take perhaps a resisitor between each bulb to slow down the power before it reaches each bulb.

@xlxkill3rxlx Год назад

Very nice wiring videos I hope you can make one how to wire 60” and 2 20” light bar to the same switch

@Mars36912 Месяц назад

Thank you I will need to try on my 75 beetle vw and I got a square relay with 3 proud the original flasher relay which led relay I will need. And for tail light I assume I don’t need relay.

@glennputman4138 Месяц назад

Love all your videos. Wish you had schematics. I am doing a complete rewire on a 1979 easy go GT seven truck and have purchased a lot of the things you show but the main thing was a six place relay fuse block with 11 fuses

@wisconsinbush2940 2 года назад

It's actually really easy. That hazard switch is bypassing the turn signal switch and going to both relays. But what if you wanted the left turn signal lightbulbs to be independent flashing?

@letsdrive3943 2 года назад

Thank you!!!!

@WiringRescue 2 года назад

Happy to help! Thank you for watching!

@auto-funatics7147 Год назад

This is a great simple explanation. I'd like to ask though, as I keep wondering why I can't just use a simple On/Off switch for the hazzard, because that's essentially what you've bridged the switch into isn't it? Thanx, John

@shalvinshaileshsingh1613 Год назад

Learned it the hard way, it actually shorts your turn signals and makes it into a hazard😂 as well.

@auto-funatics7147 Год назад

@@shalvinshaileshsingh1613 Actually, I figured it out! Took me two weeks, but once I got it right, it was dead simple. Decided to upload my solution to it, which you'll find on my channel ☺

@Travelguy_nw 2 года назад

This was a great tutorial! I have a Polaris rzr with turn signals but no hazard lights. Was there any specific reason for using a double pole switch over a single pole for the 4 way function? Only thing I could think of was amp load?

@dratilhelvetedotlol 11 месяцев назад

You can't connect the two white wires in this system together, otherwise you will always have a 4-way flasher.

@karsonkip697 Год назад

Thank you

@Bosbulls 2 года назад

Cool. I liked the first video and the explanation of the hazard switch actually makes perfect sense. It was a kind of why didn't I think of that moment. Now for another curve ball. How would you wire this all up to make the turn signal switch override the hazard switch? That is, if the hazards are on and you want to indicate that you will be turning to one side, the lights on the other side must temporarily switch of until you cancel the turn signal switch.

@WiringRescue 2 года назад

You’re the second person that has asked me that. I should probably add this to my to-do list.

@robertshaw8745 2 года назад

I enjoyed the video, but I watched this video hoping this same question was answered where the turn signal overrode the hazard on one side or the other. Thanks.

@dickdick999 2 года назад

Hi there. I do like your wiring videos as they are well done and they fully explain everything. One question. For the hazzard light switch. Could you use a single pole single throw switch with 2 wires to the indicator switch instead of the double pole switch? Just wondering if that would work. Thanks.

@Bosbulls 2 года назад

No. Because then when you use the turn signal switch to either side, all the lights will still come on due to the "short" at the single pole switch.

@ValetAutoCare 5 месяцев назад

Great content! I'm hooked for sure. Is it possible to add led flashers to the automobile hazard light circuit in order to utilize the vehicle hazard switch instead of having to add an external switch? My thought is that if I could just tap into the hazard relay we could eliminate the need for an auxiliary switch.

@danielhunt7691 2 года назад

Great video . Will help with wiring my series 2a landy. However i have a question. Could only one relay be used. If the relay was wired before the flasher. And the switch was more of a negative swtich.

@WiringRescue 2 года назад

Stay tuned - I’m actually working on a video right now that may be even better than what you want! I expect I will have the video live sometime next week. It will (hopefully) be turn signals, parking lights, brake lights and hazards.

@stephenbolton1098 Год назад

Awesome

@WiringRescue Год назад

Thank you! Glad you like it!

@daltonm.379 2 года назад

Is there any button switch replacement for the hazard switch? Instead of the lever style?

@iceman1st1 Год назад

I have 5 push buttons switch as there race buttons for a motorcycle. I've used two buttons one for each indicator and have one that aint being used. I was wondering if I could use it for the hazards even though it only has two wires or would it just light both sides up every time I push the indicators on

@MsUltrafox Год назад

You can use a basic switch instead of a double-prong switch because you flip both sides at a time regardless. Just split the white wires coming out of the switch and you have the same effect.

@legotech7 Год назад

I am trying to wire small led lights. Do I need a specific led flasher to wire them per your wiring diagram? And how do I estimate the size of the fuses needed to wire them this way?

@kaveendakshitha5971 2 года назад

Thanks

@WiringRescue 2 года назад

You’re welcome! Thanks for watching!

@33NATAS 2 месяца назад

thank you

@WiringRescue 2 месяца назад

You're welcome

@JohnWheater-kz8cv Год назад

I have a 1973 Mach1 I hope this will work for me when I got the car the 4ways did work they cut the wires, I have all my lights but not the 4ways I am going to try this thanks.

@Ghost88890REAL 2 года назад

I have a 3 pin flasher relay, how would I connect that and add hazards? L - load B - 12v + E - earth -

@roberthart2950 11 месяцев назад

I have a led flasher and I’m getting the left blinker indicator on when I turn on the parking/ headlights?

@rdevulapalli Год назад

I need help with the wiring for turning backup camera with turn signal. Can I use similar circuit using the relay switches for turn signals to power my back camera and also trigger the Stereo backup camera signal.

@justicewhitfield 9 месяцев назад

Can I utilize a self latching button for hazards

@wondimagegneassefamolla1289 2 года назад

Does it work without flash light switch?

@joereyes30 2 года назад

I have a 6volt car from the 30s Cold you make a video on turn signals and hazard light for those cars ? Thank you for the videos 👍🏽👍🏽👍🏽👍🏽

@WiringRescue 2 года назад

Sadly I don’t have any 6v cars or parts at the moment. If or when I do though, I’ll gladly make some videos on the topic!

@jaimevilla9142 11 месяцев назад

wow, thanks hope to fix a single turn signal that does just does not work. On another note. I've tried step down converters and resistors but everything always gets so hot. What is a safe way to drop the car voltage from 12v to 6 volts without overheating. I would like an adjustable voltage but the small step down converter gets extremely hot. I am not an electrician and am a total noob. Maybe a general resistor that I can put in series to gradualy reduce the volage or is that dumb? Thanks for your videos. I have you as my home page and hope to learn a lot from these.

@michelwaterman8712 2 месяца назад

Hello, I am in the process of restoring an old VW Beetle and there is no power in the steering wheel ! Could I also do this setup but then by interrupting the grounding ? so also grounding of the hazard knob ? I love you simple explanations. Good luck and thanks. Greetings Michel

@WiringRescue 2 месяца назад

Yes! That is very doable! I also have a video that describes that design with a bit more detail than this one does. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QCkfFCLa_Jg.htmlsi=0QRJMh45MQibo12L. Good luck with you VW!

@qube76 2 года назад

I just installed a remote keyless entry on my car. How do I wire it so the lights flash when I lock/ unlock the vehicle?

@rowanhill4888 7 месяцев назад

Would I need a diode on each switch wire? Wondering what would happen if the hazard switch was on and the indicator switch. Wouldn't it be short?

@MrMalbolgia666 Год назад

Can I use a 3 pin SPDT switch to achieve this?

@kickside4u 2 года назад

I accidentally broke the hazard switch on my 1996 Chevy S10, I tried replacing it, but the disassemble process it’s no worth the effort just because ii may damage other components in the process. It’s there a way to run an outside switch to activate the hazards? Thank you!

@ehm179 2 года назад

Can you use the indicator power to also power the hazard switch. So using the same feed?

@WiringRescue 2 года назад

You could! I just did it this way in the video to keep everything as simple and separated as possible. These videos can get really hard to explain if I have too many things connected together!

@user-qf2xb8fz2b 10 месяцев назад

I have a transit bus that has two foot button switches for each side signal. How could I connect a hazard switch in this case?

@nfd241 4 месяца назад

How would you wire in spot lights to your turn signals so you can see where you're turning?

@kylescott4888 2 года назад

Hey! I followed your method here and I can't find a double throw single pole hazard rocker switch for my roxor. Would match all my other switches. I thought about buying a rocker switch with alot if poles. Long as the wiring diagram is correct then just popping the top off. Not sure What else to do

@kylescott4888 2 года назад

I think ill add a relay to the Harvard switch, that way it can send power to both signal lights

@michaelfabellar5371 2 года назад

Can you make auto hazard off?

@jooks1951 11 месяцев назад

Question….. I am putting turn signals on my 1921 Model T but I want to have an indicator light on the dashboard (one light for both left and right) I copied your instructions on the turn signals but now am stuck. Can you give me an idea? Love the videos. Mike

@douglascorkum9894 Год назад

I have a 5 pin hazard switch and when I try to hook it up as per your diagram all i get is the 4 way flashers no matter what switch is on. Can you help me. Doug

@cajuncacheman9574 Год назад

You didn't demonstrate the turn signals functioning after wiring in the hazard switch. What about using other switches? I have a 7 pin On/Off/On switch and a 5 pin hazard switch (dpst). Can't I use these? Okay, so it looks like I cannot use the hazard switch with 5 pins. Only 1 pin is an output. So, do you have recommendations on a particular switch that is a rocker with illuminated label?

@user-ig8mt9ff2r Год назад

This blue wires that comes from the flasher relay the coming from which number on the flasher relay

@hiemabedrog 2 года назад

Will it short if you use either side indicators while hazard is on, for argument sake.

@joensuguitan1515 Год назад

I was wondering what if just connect the power supply to the flasher relay and the output to the switches therefore not needing the 4or5 pin relays? Will it work?

@WiringRescue Год назад

It depends. If you use the wrong amperage switch, wire, or fuse, it will possibly light on fire. I always prefer less fire.

@sr8shoota 7 месяцев назад

On my 2008 dodge charger the hazard lights do not wokr, but my left and right turns signals work. What could the problem be?

@richardyelich4695 2 года назад

I am running led directional lights .Do I have to go through a relay?

@WiringRescue 2 года назад

It depends. Is your switch rated at a high enough amperage to handle the amperage draw of the light bulbs? Are the wires and flasher also rated at a high enough amperage rating for the bulbs you are using? If so - then it should be fine. The only thing to watch out for at that point would be somebody in the future adding regular bulbs in place of LED’s and it burning the circuit. If you have the fuse properly sized though, it will pop the fuse before it burns the wires or switch. Hopefully that made sense. Lol. If not, I can try again.

@zoharflax6363 2 года назад

Hi, I just bought a school bus and want to change the flashing lights at the top of the bus to be simply controlled by the on and off switch. I'm having trouble locating the "flasher relay", is it usually cylindrical like the one you used in this video and is it usually located in the fuse box? Thanks! I love your videos.

@WiringRescue 2 года назад

Generally they are cylindrical, but some are also black rectangles. They are almost always in or around the fuse box. I’m imagine that a bus may have a few fuse boxes though. Then again, I’ve never worked on a school bus, so I’m just guessing. Good luck on your search!

@jaimemaguina1420 Год назад

I'm wondering if I connected all this schematics using the actual bulbs with the wires to it it would be a no problem? 🙏

@pauloutten3628 Год назад

Hi there, would you happen to know why the hazard switch on my 1997 1.9td Fiat Ducato has 9 wires going to hazard switch. Trying to work out a fault but having trouble working out how the system is wired.

@Donnievandewiel 3 дня назад

Do I need the "double pole singel throw " switch for the hazardlights or can I also use a normal single pole switch?

@AngelRod-nv9fd Год назад

I need some help. What could cause everything to work except for the rear right brake light? Flashers work everywhere except the rear right. The turn signal works everywhere except the rear right BUT when I hit the brake and have the right turn signal on, the brake light works. Both filaments work when I connect them directly to a 12v power supply for the lightbulb in question. Could it be a bad turn switch or the hazard switch? Any suggestions?