How to Add Realistic Rivet Details to Scale Model Aircraft for 1/24 & 1/32 Scale Join this channel to get access to perks: / @scaleaton Support Scale-a-ton! / scaleaton VLOG Playlist • 1:48 Tamiya F-14A Tomc...
I recently spent hours riveting the 1:48 Revell SBD dauntless, with Rosie the riveter... This method is "insane" but at the same time beautiful result as Always! And yes, whatelse to do on a sunday afternoon? Self torture of corse! Stay safe!👍🙂🇵🇹
Beautiful work. Probably the best way to convey bare metal on an aircraft rather than using metal paints. I would love to see if application of foil like this would work well for either engine exhausts or nozzles. Cheers!
How does x22 as an adhesive bond if you stretch the foil around compound curves? Please have a look at my work on this for some ideas. Self adhesive tape is indeed too soft and thick
Hi, it works on every panel with kitchen foil if you are not planning to masking. I've used many foils and adhesives last 20 years. I like to use hardware store materials on my videos much accessible to everyone. That's why I use that foil on the video. Also this one will be finished in not metallic. I will apply a heavy paint chipping effect want to add those rivet details. That's why I prefer to cover with foil instead of metallic paint. My goal was not a perfect foil covering job.
I think that a very light sanding with a rigid backed, thin foam, very fine sanding stick, block, or pad would improve it a little. It looks great already, but this is what I'm thinking.
Interesting. Wouldn't it help to first airbrush a quick layer of silver before the application to also take care of the appearance in any gaps or hard to modify areas?
Hello. Great video. I would like to try the same thing with my P51. By adhesive X22, do you mean ALTECO-X22? Or perhaps Tamiya's acrylic X22 clear paint?
Hi! You have set yourself two difficult tasks at once: covering with foil and riveting it. Maybe by using a thinner foil, you could make the original rivets appear through... Not an easy job in any case.
Hi Radu, things happened completely random. I didn't plan these :) I've used every type of foil but after punching them with the handmade tool they puffed up the next day. Then it turned into stubbornness and I won.
It's very time consuming and tedious with bare metal foil and I don't think it looks that great. Airbrushing different Alclad laquer alloys on top of gloss black lacquer looks way better if you know the tricks!
Elinize kolunuza sağlık üstat. çok iyi bir öğretici olmuş. Böyle tecrübelerinizi paylaştığtığınız videolar çoğalırsa çok sevinirim. Yıllardır paylaştığınız Tick'ler benim için çok güzel ve değerli bir kaynak. Sivilci olduğunuz için iyi bildiğinize emin olduğum BMF'i (Bare Metal Foil) niye tercih etmediğinizi merak ettim doğrusu.
Teşekkürler Cem Bey. Bunlar videoların içinde kaybolup gidiyordu, başlıkla öne çıkartayım diyorum artık ben de zaten. BMF pahalı :) Bir de perçin izini yapınca her türlü folyo kabarıyor, hepsini denedim. Üç haftadır saç baş yolduruyor bana. En sonunda doğalgaz bandını dayadım gitti işte :)
@@Scaleaton öne çıkarmakla iyi yapmışsınız hocam. Bu short yapmak için de ideal. RU-vid short diye dayatıyor anlaşılan. Yararı olacaktır. Özellikle de yorumları uzatıyorum ki... youtube etkileşim olarak görüp bir tık ön plana çıkartsın
I must try this some day. The headache will be finding a thin but strong foil and a glue that will hold the foil flat to the plastic, even after burnishing.
О, ты на дневник не наклеивал обложку товарищу! История еще та! Попробуй запори! Ты лищь мои десткие ламинаские фантазии всколыхнул, где нет права на ошибку.
