How To Add Your Mii To Dolphin 

No problem, glad you found this useful

Glad I could help 🙂

@@MkwiiBen Very well done man, subscribed! 👍🏻👍🏻👌🏻👌🏻

Hey can you help me? I tried using the TAS input to help me navigate around the Mii Maker, however nothing worked. And Ive already tried adding you on discord, but it says it was incorrect even though I put it exactly how you wrote it. Here is my discord just in case - LOOK CAREFULLY: Ummmmmmmm Ver.8868878950#0015 (I know it’s long, but just role with it!)

Sorry that was my old discord my new one is Mkwii Ben#1111

@@MkwiiBen sent friend request

The U stands for USA version soo it means that J is japan version soo u problably have the NTSC set to japan version

No problem

ClausTMM406 ay no problem

This helped me port some of the MKWii staff ghost Miis into my mii channel!

ClausTMM406 that’s awesome glad I could help. I might do some more tutorials so subscribe if you like idk

Np

Np 🙂

Use a real Wiis nand

Yeah it’s sick

@@MkwiiBen I almost forgot, after dumping from the actual Wii, I had to change the MAC address on the Nand, just so I could edit the Mii on Dolphin. I wish there was a way to get the real Wii U gamepad to work with CEMU.

Wii games truly are special

Wait can a Xbox 360 emulate a Wii?

Make sure you controller is set to gcn emulated. And make sure it is the only controller selected

Make sure it’s the wii mote tas input not the gcn

Aaron 007 yeah but this was to show a no gecko way and a permanent way

Mkwii Ben oh ok. Publicise it then

Aaron 007 lol it is

I dumped from an actual wii, to the emulator. I could literally take mii that were on the console and zap them to the emulator, after turning off the console with a wii mote. I couldn't edit the mii before, until I changed the mac address to what was on the original wii. I never really owned a wii when it was new. So I was surprised to see there were less mii options than what was available on Wii U/3ds. Now I have more reasons to carry a wii mote. I tried the. mega mii mall program on the PC, and it worked. It frickin saved my saved mii, from the mote, convrted as a file on the pc, like how Chao Saves work for the Steam version on Sonic Adventure. I really missed out on this

This way is much better because you get to keep the mii forever. Also the framedump advice at the end of your comment is worthless because his dolphin is at such a low speed that the inputs will be too rapid for most viewers who watch this to keep up with.

Change the controller to wii mote

i dont see that says that it can change

@@MkwiiBen yeah how do you change it

are you using an emulated wii mote on dolphin? if so then just change the settings to default and it should work

Do you have a dolphin bar?

No problem

Well tas is a tool assisted speedrun which is what you make. Dolphin is the the application you use to make it

@@mrguy6825 make sure to emulate the wiimote, not any other controller or it won’t work. Then you can use tas input to move the cursor

???

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

@@MrMightyMcD dude thank you so much. i never would have figured it out

@@MrMightyMcD tysm

I guess wii channels are down

Ofc

I believe so

u can use an xbox controller, however im not sure about the gamecube controller

I mean do it at your own risk but yes it is safe

Yup would will have to use the emulated controller to click them

Did you make sure it was an emulated wii mote

@@MkwiiBen yes, but it still won't work

Wdym tas part

whenever i try and get it so i can move the controller on the mii channel. i cant seem to figure it out

@@ffishy_ add me on dc @Mkwii Ben#1111

ok i will in around 15-30min

ok i sent it

Add me on discord and I can see if I can help

@@MkwiiBen it’s fine thanks I worked it out I just had to sort some stuff out with controller settings and I was able to use my controller 👍

@@louisperrin9348 What did you do? I have your issue

Have you opened up your game and played it?

yes

Are you trying to create a mii that you haven’t used or one that you have?

Add me on dc and I can help

Unfortunately I don’t believe so ☹️

@@MkwiiBen thanks, guess I can’t use my 3ds miis unless I can get a wii, thanks for tutorial

If you have all three of those games then you can use a program called clean rip and get you copy of your game

@@MkwiiBen thx :)

@@MkwiiBen can you accept my friendrequest on discord? My name is AbnycGaming so you now who is sending the friend request ;)

No problem, glad it helped

Oh 😳

Huh-

I've got the same problem yesterday, so I replace my Dolphin's file with a working friend's file (it was only working with his computer I don't know why, so I took his exact setup file) and it finally worked. Maybe there is a problem with your antivirus that didn't allow the creation of this setting.txt, try to make Dolphin an exeption for your antivirus (mine was Avast and I had an error due to it for playing the same Wii game with him, try this)

No it’s the next one

Mkwii Ben thank gosh since I don’t really play any mini related games on dolphin

Oh that’s ok glad you still enjoy my content!

🙂

Sorry I changed it, Mkwii Ben#3094

Yeah just add me as a friend

same here

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

@@MkwiiBen Thanks!

@@josh_roblox1498 lol Chinese? It was probably Japanese.

@@ju2tunknown not everyone is fluent with languages outside of their native language lol

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

same

@@MkwiiBen it was thx

Mine too!

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

Make sure in config->general that at the bottom it isn’t set to force console to ntsc-j

@@MkwiiBen thanks for the help but i think i can still do it in japanese

Ok 👍

@@MkwiiBen how do I change the ntsc-j because I have it

Np 🙂

@@MkwiiBen can u turorial on how to get internet on dolphin plz

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

Try going to Options > Configuration and under General you'll see "Fallback Region", change that to NTSC-U. Was probably set to NTSC-J.

Your mii?

Nope

Mkwii Ben#8831

@@MkwiiBen never mind i got it figured out! Thanks! Much love

I’m pretty sure it works for Wii sports, I don’t have the iso for it tho

It's OK thanks for the video

Make sure in config->general that at the bottom it isn’t set to force console to ntsc-j

Mii cloner doesn’t permanently keep the mii

@tword42 shut yougly ss uip

Yay!!!

what do you mean by this

Like when I try playing wii sports resort it says to disconnect extension but I dont know how

@@Qsallor oh if you are using the wii motion plus extension then on the back there should be a locking system. Unlock it and then hold the two grey things on the side and then pull

@@Qsallor if you are using mouse and keyboard in the controller settings click configure and untick the nunchuck connected box