Hey man thanks for all the info. Cam I ask abou the silver ECU? In the video that you show how to clear your codes the one you're working on has the silver ECU?. Now this video says never jump the pins on the silver? What to do?
Hello, I have a P0122 error. utv wildcat 1000 (years 2015) I understand that it is the TPS sensor. Does this procedure help me to jumper the ecu as well? Why do you say that you have to see if the ecu is silver?
Hello. Awesome video! Very well explained and informative! I have. 2015 arctic cat XT that just recently threw a P0336 code. Runs fine when its moving but dies when coming to a stop. Any idea what could this be? I have the shop manual but no mention here of any DTCs. Any help is greatly appreciated 👍
Having issues with my 2012 700 mudpro. I think I need a new MAP sensor but it was throwing the code for throttle position sensor as well, I tried this method but it won’t leave that bottom low level line, I backed off the screw and turned it slightly thinking it would be sensitive and the line would jump up to the middle but it didn’t move at all. I know I need a map sensor and oring , am I screwed for the TPS as well? Let me know Thanks
Rotating the TPS to the front of the engine will raise the throttle and towards the back lowers it. It is sensitive when adjusting it but you may need to rotate it more to get it to move.
Hello guys, i am having an issue with arctic cat 700 efi 2007 model, looks like it does not getting fuel thrue injector, bet when conect injector negative wire to ground than it spray fuel, it also if i put 12 volts for injector it starting to spray fuel as well, so guys is it ecm problem or i have missed something :)
Hello, my engine, arctic crack 550lxt 2014, eats gas at the ball for the first time, but after slowing down with the engine, the engine starts to misfire, so it does not eat gas, the code is AC 14, what can I do?
Hopefully this will help you in finding what might be the issue with your ATV. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JavSu7sCP8A.htmlsi=0ivO9quX3NHQ-gZ1
Does your ATV have the teardrop style gauge or the newer style on the Alterra models? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Zf6Dw6hvRrE.htmlsi=kG489Bl8_ZTzDdTq
The codes should clear once the issue is corrected. Have you tried syncing the efi system after you changed the wires? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5mnc3PAVihQ.htmlsi=4441ojSF3xErL4Mt
SC14 is your TPS (throttle position sensor). SC means it’s a stored code so you’ll need to clear it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GjBNnlUykqo.htmlsi=Z5TFdlibFybRR2rI
Hello. I have arcticcat wildcat trail 700 2016. I got the code P0122 and changed TPS sensor. Now I get code P0121 and by adding the gas it doesn’t work properly . I don’t have tps diagnostic or tps connector. Is there possibility to set tps without original diagnostic? Is this way that you described possible for wildcat?
You can adjust it without the tool using your gauge. Hopefully I answered your question in this video and you can get it going. 👍🏼 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LLLv_-MdhX8.html
I have a 2006 suzuki ltr 450 quadracer fuel injection an my FI/Temp sensor light keeps blinking it cranks but no start or idle I have spark I'm getting fuel New thermostat new temp sensor I can't figure it out please help!!!
Hi, I just got an 2010 trv 700 and is giving me the sc4.0 code I reset it and soon I started come back. Any idea what can be. It’s says isc when I look up the code.
Thanks for reply. Only when idle is like misfires and Just show code but runs super good I just installed the epi clutch kit, did the fluid change, spark plug and k&n air filter with the dust cover.
On the newer models without the diag plug the codes will show on the display. When the problem has been resolved turn it back to the run position and it will show if the codes have been resolved.
