Тёмный

Don't Buy Throttle Position Sensor! Test it. How to test TPS 

JeepSolid
Подписаться 80 тыс.
Просмотров 101 тыс.
50% 1

Multimeter Tester: amzn.to/3d3XIzy
Jeep 4.0L throttle body gasket: amzn.to/3RQ4qbc
Throttle Body Cleaner: amzn.to/3BpX7kZ
New TPS: amzn.to/3T7bXDA
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
JeepSolid Merchandise: Hats, Shirts, Mugs, etc: / @jeepsolid
👨‍🔧 A few of my favorite tools 👇
OBD2 Scanner. Must have tool: amzn.to/3arRurY
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/2fTDoTR
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Авто/Мото

Опубликовано:

 

8 сен 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@guilhermecosta8558
@guilhermecosta8558 Год назад
Hello, a tip... if doing all this service the engine continues with unstable idling or accelerating alone, change the 4 orings that go on the throttle body shaft (TBI)... the shaft has a small play in the bearings of The needle and the seal dry out over time, causing false air intake... almost nobody knows about this trick! good luck everyone, greetings from Brazil!
@MoeezAhmed
@MoeezAhmed 8 дней назад
I'm getting a DTC P2101 error on my FAW V2. Engine check light turned on and no acceleration.
@rickv4714
@rickv4714 Год назад
I discovered your video's last year, to say they're helpful is an understatement. Really great work and well done presentations that anyone should be able to understand. A really nice service that you and your videos offer and give to the rest of us Jeepers. Thanks.
@garystephenson3211
@garystephenson3211 Год назад
Hi Dale, been watching your videos for years, thanks so much. Like Kevin below, I too have a 94 YJ w/ 72 k original miles that has a strong rich gas smell from exhaust. Never had CEL, no apparent leaks from aftermarket header. cat and exhaust system replaced 2 years ago. Have good gas mileage, idles well, starts immediately and I replaced O2 sensor two days ago, checked MAP (good voltage with decreasing voltage when vacuum applied), checked TPS with good results, did fuel injection pressure test with numbers slightly higher than your video (34 psi idle with 42 psi vacuum line disconnected, with no change with throttle applied). Cleaned throttle body per your video. No visible leaks from injectors, but after watching your video ordered new injectors just because and will install when they arrive. I have done "exhaustive" forum searches and out of ideas. Problem is above my pay grade and think I need a professional. It appears you might live in Oregon as I do and was hoping you might have a shop recommendation in the Bend area. Thanks again!
@RandolphKim
@RandolphKim 7 месяцев назад
Did you get it fixed?
@thousandoaksauto1696
@thousandoaksauto1696 Год назад
Hey Dale, good common-sense approach to solving that issue. I bet you get better gas mileage too!
@nadirmonroy
@nadirmonroy Год назад
Very well and professional explained material! Easy to understand it!
@moabwheeling1305
@moabwheeling1305 Год назад
Great job Dale and great explanation as well . Keep up the great work my friend.
@JeepSolid
@JeepSolid Год назад
Thanks, will do!
@krissamsalazar6726
@krissamsalazar6726 Год назад
So easy to understand how to do the job 🤟
@derekdavidson3205
@derekdavidson3205 10 месяцев назад
Great video thanks for sharing
@your2nd
@your2nd Год назад
I like your bench you were cleaning the throttle body on, I have a couple of those myself.
@nevadaboy9769
@nevadaboy9769 11 месяцев назад
lol Yep i have one of those portable benches they come in handy & if need a bigger bench ill just grab the neighbors to 👍
@Dani_305_
@Dani_305_ 10 месяцев назад
Good work
@John-zz5gt
@John-zz5gt 8 месяцев назад
Thank you sir
@noearias2006
@noearias2006 7 месяцев назад
❤❤EXCELLENT VIDEO THANK YOU FOR SHARING YOU KNOWLEDGE ❤
@dg98adams
@dg98adams Год назад
Great tech tips
@JeepSolid
@JeepSolid Год назад
Thanks!
@leskobrandon538
@leskobrandon538 Год назад
On testing potentiometers, I have a tech tip... If you can find a older analog multimeter like a Simpson to use, it makes it way easier to see the dip in the sweep...
@JeepSolid
@JeepSolid Год назад
Very cool 👍
@NoWr2Run
@NoWr2Run Год назад
I have an old one from Radio Shack, it has a BIG ASS NEEDLE.
@JeepSolid
@JeepSolid Год назад
Oh, wow! That’s a blast from the past. Are there Radio Shacks around anymore??
@NoWr2Run
@NoWr2Run Год назад
@@JeepSolid The one near me in N.E. PA. closed about 8 years ago.
@MajorWeakness
@MajorWeakness Год назад
@@JeepSolid yes there are about 400 franchises still operating. I looked it up!. I actually just went into a radioshack while I was in Tennessee a few weeks ago
@tycityci228
@tycityci228 Год назад
Hi I love your videos Would you please show how you conect multimeter to this sensor please.
@scottb6194
@scottb6194 Год назад
Thank you.
@JeepSolid
@JeepSolid Год назад
Thanks
@Nigriff
@Nigriff 6 месяцев назад
It's cool how the throttle plays music
@Mrshibbs3291
@Mrshibbs3291 Год назад
My 99's throttle position sensor was throwing a code but it was my clock spring that was faulty sending a short to a shared ground in the PCM causing the TPS to malfunction. The codes wouldn't clear until I pulled the horn relay which confirmed the clock spring. Was causing idling, stalling issues, and acceleration issues.
@JeepSolid
@JeepSolid Год назад
Ugh. Electrical gremlins can be a nightmare
@thatrandomuploader3362
@thatrandomuploader3362 Год назад
Did you do that while it was running or just with the ignition on
@spaceflight1019
@spaceflight1019 Год назад
Funny that this video popped up just after watching an Office Space video about TPS reports...
@bkpickell
@bkpickell 11 дней назад
What is the symptom of a dead spot? Like say driving at cruising speed and maintaining speed puts position at dead spot. I have two vehicles do the the same as above, but different symptom. One vehicle it will sputter until I change throttle position either by giving it more gas or a little less. The other vehicle will surge rpm until I change position up or down. First is cable 2nd is drive by wire.
@mrbreezeet1
@mrbreezeet1 9 месяцев назад
2001 Grand Prix with a 3.1-liter motor, started idling high after good and warmed up. No codes at the time. When motor would idle too high, 4T65E trans would shift super late under light throttle. About 25 MPH and 2,500 RPM before it would hit 2nd. gear. Was OK the next day. 3rd. day, high idle and late shift again! This time the check engine light did come on. Code P0121. Scanner TPS angle percentage at idle shows 0 sometimes, and sometimes 0.39% and ~ 100% at WOT. One time while sitting there idling fine, ~ 700 RPM, all at once the idle kicked up to ~1,300 RPM all by itself. I looked at the scanner, now TPS angle percentage went up to 2.75%. From my readings it looks to me like the sensor IS receiving the 5V reference, and my ground in good, and my reference voltage is changing and being sent back to the ECM. My voltmeter is at my buddy's garage right now, so I could not do the voltage testing at the TPS connector, as you have outlined. I'm ready to take a chance based on my findings, and just install a new TPS. What do you think? Reply
@ScottyAquatty
@ScottyAquatty Год назад
hello i have a 2000 Cherokee XJ i am getting code PO122 but i am having trouble with it not shifting to. plus i have code PO123 code PO121 and code P1494 the gas pedal dosen't have anything in the way of it. and the code P1494 isn't that probably comming from the Throttle Position Sensor ? thank you for your help Scott.
@joerodriguez5595
@joerodriguez5595 4 месяца назад
Great video, thank you! I have a question if you have time, I checked with multimeter and checks out good, no dead spots all the way. Is it still possible that the sensor is still bad? For reference, when I am driving, jeep always stalls at low speed (0-10mph) and at (40-45mph) when letting go of the pedal. If you press the pedal pass it certain rpm it stops stalling, and also won't do this at any other speeds. Any ideas? Thanks in advance.
@tracieaddison4373
@tracieaddison4373 9 месяцев назад
Hey I have a 2007 Jeep Patriot recently I replaced my throttle body it drove for a week. The lightning bolt has popped up again should I change my gas pedal to get it back running
@bubbab8943
@bubbab8943 Год назад
Great video. What brand of TPS did you replace it with?
@JeepSolid
@JeepSolid Год назад
Thanks! I’ll have to double check brand
@RandyStClair-li4ss
@RandyStClair-li4ss 10 месяцев назад
I replaced the sensor but am still getting a code “throttle body sensor A high? Any thoughts?
@stylze5767
@stylze5767 4 месяца назад
what are the chances. this is the exact car im doing research for. nice
@Archivist953
@Archivist953 4 месяца назад
Hello Jeep Solid - Curious what your symptoms were before you cleaned the Throttle Body & replaced the TPS? I'm having issues where the Jeep sometimes won't start (on the 1st try), especially after its been running for a while.
@ipaporod
@ipaporod 7 месяцев назад
I notice that your TPS is a fixed one (fixed position) , which since it's fixed/can't be wiggled it doesn't need to be calibrated!
@jamesw3834
@jamesw3834 10 месяцев назад
I'm having a tps issue I've changed it twice can't get the code to go off keeps coming back I direct grounded it to the battery but I'm still getting a circuit voltage low any help by chance would be deeply appreciated.
@Re-DeclarationOfIndependence
@Re-DeclarationOfIndependence 9 месяцев назад
Brand new tps, and it’s still getting low voltage. Could it be the wiring?
@blownaway4371
@blownaway4371 Месяц назад
I noticed on my throttle body that there's room to rotate/turn the TPS a bit. It looked you just stuck it on and screwed it in. And the meter started at 80ohms. Are we supposed to rotate the TPS to the lowest reading, THEN tighten? Or does it matter? It would be nice to see you add one of these 62mm complete throttle bodies! My project is a 01 Dakota with the 2.5 4cyl. And a common upgrade is to use the 4.0 T/B. So more would be better RIGHT?? 🙃
@sergiogonzalezvirgen2580
@sergiogonzalezvirgen2580 Год назад
Hola saludos tengo una Grand cherokee modelo 95 ahorita se encuentra en el taller según en ingeniería automotriz me dijeron que el motor está jalando perfectamente bien todas las lecturas están correctas pero que la luz check engine no se apaga y el mecánico menciona que no la pudo apagar con el escáner entonces yo le hice el comentario que le pusieron otro TPS de otra Grand cherokee original que da una referencia de 0.86 milivoltios y la luz Chek engene se apagó sola ya no prendió crees que sea una referencia 0.42 demasiado baja como para que no pueda pagar la luz Chek engene o un sensor TPS demasiado corriente la mía es una Grand cherokee modelo 95 4.0 6 cilindros americana Se repara el fallo y la luz check engine sige prendida
@maolanakhakkibillah7157
@maolanakhakkibillah7157 4 месяца назад
@01:08 How do we know our car power supply reference for this throttle position sensor? My toyota crown super saloon 1991 MT, 1gfe, 2.00 CC need help, please give me the information. For add information, i get 12 volt on my TPS, is it normal or what?
@brandonallen914
@brandonallen914 Год назад
Have you ever came across 12v on your center wire? I have my 5v signal, ground but my middle wire is 12v. It changed when moving the throttle and stays 12v in middle terminal with the connector unplugged. This normal? Getting flash code 24
@Pitstopcomponents
@Pitstopcomponents 4 месяца назад
I read about the Clockspring getting shortwired and cause 12v supply to PCM...same issue as you have, it is because the Airbags operate on 12v, while the Cruise control works on 5v, if shortwired, the Airbag-positive can contact a Cruise control positive causing it to get 12v too.... check that as soon as possible, as it may fry your PCM one day or cause other damage to Electronics
@hikerJohn
@hikerJohn Год назад
I wish you had shown a close up of unplugging it, mine will not unplug and I don't want to break it till after I test it.
@gail6904
@gail6904 Месяц назад
hello when i manually move the throttle cable I go from 1.2 to 3.9..it does go up and down ok..is the 3.9 OK?? Some say it has to go to five..MY 98 KIA sportage revs to 3,000 RPMS upon COLD START then IF I DISCOONECT THE IAC VALVE it drops to 850 rpm which is normal..is IAC BAD??
@mohammedmujalled1554
@mohammedmujalled1554 Год назад
Hello, what about if the maximum is 1 volt. Is the issue is the sensor
@xthe_grimx2923
@xthe_grimx2923 5 месяцев назад
mine maxed out at two
@faisalsjeepventures
@faisalsjeepventures 7 месяцев назад
My volts wont hold above 3.5. What does that mean?
@MrBababuwi
@MrBababuwi Год назад
Aren't you the guy who demo above ground pool from costco?
@JeepSolid
@JeepSolid Год назад
Haha! Yep. Jeeps and pools 😂
@r3kanman
@r3kanman Год назад
Hi quick question - I have a 94 YJ and it has quite the rich smell - I have replaced the O2 sensor - and have wondered about the sensors you mentioned MAP, MAF, IAC, and TPS if changing them would help - or would I be better off looking for an exhaust leak? I have checked for any stored codes and there are none - any advice would be great. Are the other sensors "easy" to test as well with a multi meter? Thanks
@JeepSolid
@JeepSolid Год назад
Is your fuel economy terrible? Could be leaking injectors. Maybe see if the fuel pressure test. See if it holds pressure
@dt5644
@dt5644 Год назад
i sure wish i lived close to you. 1995 yj 2.5 low idle, and the local mechanics cant figure it out. when i bought it 4 months ago most of the sensors were originals. so i replaced them all, map, 02, iac, tps, air charge sensor, new plugs, wires, cap rotor and coil. when i first put the tps in it actually idled normal for about 10 mins then died back down to 300 rpm. and at temperature that is where it idles runs rough and has a miss. at speed seems to run fine. fuel rail pressure is at 31psi. I am stumped and wishing i had never bought it at this point. Any subjections??? any at all??? anyone?? other than sell it, to deep into it now for that.
@JeepSolid
@JeepSolid Год назад
Vacuum leak?
@dt5644
@dt5644 Год назад
@@JeepSolid that was my thoughts for sure. but i cannot find one. funny thing is even after warm. If you cut it off crank it again it idles normal for a minute or two then back down to 300rpm. trying my 3rd mechanic today. some of his family members drive 90s model jeeps so I'm hoping he is fimilure with them.
@guilhermecosta8558
@guilhermecosta8558 Год назад
Hello, a tip... if doing all this service the engine continues with unstable idling or accelerating alone, change the 4 orings that go on the throttle body shaft (TBI)... the shaft has a small play in the bearings of The needle and the seal dry out over time, causing false air intake... almost nobody knows about this trick! good luck everyone, greetings from Brazil!
@BUKWulfSh0t
@BUKWulfSh0t Год назад
Where did you order the TPS from? I believe you listed most of the posts EXCEPT the Main part you replaced! Lol
@sdriza
@sdriza Год назад
Amazon
@BUKWulfSh0t
@BUKWulfSh0t Год назад
@@sdriza i don't trust Amazon
@jamespatrick7926
@jamespatrick7926 Год назад
How is he testing the throttle sensor? Is he touching the wires?
@dodgeplow
@dodgeplow 2 месяца назад
he is back-probing it - typically using a sewing T-needle and sliding it next to the wire towards the connect until it makes contact with the wire terminal deeper inside
@jorgezuni2818
@jorgezuni2818 Год назад
I always prefer to test it with analog meter when removing tps outside and test for ohms variable reading ..it’s more visible. Fyi
@mikevi33023
@mikevi33023 Год назад
ok, thats the wrong meter to use. a digital meter will average the reading giving a false good reading. using an analog meter will show intermittent voltages as the TPS moved. like an old dirty volume control
@paulamelo3530
@paulamelo3530 9 месяцев назад
do you have a picture of a decent analog meter? and where exactly are we touching the wires? can't see it in the video
@mikevi33023
@mikevi33023 9 месяцев назад
@@paulamelo3530 I use a high end meter, a simpson 360, there are cheaper ones in homedepot/lowes/amazon look at the reviews, connect as he does on the wire back of the connector and battery ground. you should see the voltage change smoothly not jumpy, you can also do this with the connector disconnected (no power)using resistance function of the meter.
@thatrandomuploader3362
@thatrandomuploader3362 Год назад
I had 15 volts for wire 1, 4 7 volts for wire two, and 5.5 volts on the ground. I tested it with the senser unplugged instead of backprobing
@thatrandomuploader3362
@thatrandomuploader3362 Год назад
I used a test light and it only comes on when touched to the 3rd wire
@dodgeplow
@dodgeplow 2 месяца назад
you can't get 15 volts with the engine off. About 13.2 should be your maximum unless you have a serious other problem.
@thatrandomuploader3362
@thatrandomuploader3362 2 месяца назад
@@dodgeplow i think at the time i was using a bad multimeter
@petelucenti8165
@petelucenti8165 4 месяца назад
That was great will do this to my 1989 Lincoln town car great video u explained it beautifully. Peteypecs 💪🫵
Далее
🎙️А не СПЕТЬ ли мне ПЕСНЮ?
3:12:39
Jeep 4.0L engine sensors I suggest you keep on hand
15:22
Whack That Sensor To Find Out - Bad TPS or ECU?
14:28
Rough Idle??? Try This: Jeep Throttle Body Cleaning
8:46
How To Test A Throttle Position Sensor (TPS)
10:10
Просмотров 854 тыс.
TechTips #1 - Electronic Throttle Body Troubleshooting
13:53
How to test a Throttle Position Sensor TPS #1203
17:23
Просмотров 125 тыс.