How to apply Rubio Monocoat | Beginner Tips!

Подписаться 35 тыс.

Просмотров 57 тыс.

50% 1

#notsponsored #rubiomonocoat #howto #floatingshelves
Rubio Monocoat Oil Plus 2C is my favorite way to finish any of my woodworking projects. It's incredibly simple to apply and almost impossible to mess up. And after many years of use, I have found a few simple tips and tricks that may help save you time and money. Enjoy!
// Tools in This Video //
Wypall Towels - amzn.to/3AP0wsq
Plastic Syringe - amzn.to/3HzKcj3
Assorted Putty Knives - amzn.to/3p5LLz6
Scrub Handle - amzn.to/44oWgxi
White Scotch Brite Pads - amzn.to/3oR7t9F
Drawer Liner Mat 6' - amzn.to/3AQyw7W
Drawer Liner Mat 24' - amzn.to/3HAgyKE
// My Favorite Rubio Colors //
Natural (In video) - Not Available on Amazon
Pure - amzn.to/3LO6Fvh
Vanilla - amzn.to/3LuG4ls
Maintenance Oil - amzn.to/3LquI26
// Check out my other videos //
Scrap Wood Storage Cart Build - • Woodworking Storage Up...
9 out of 10 woodworkers don't know this - • 9 out of 10 woodworker...
7 Tools I Wish I Bought SOONER - • 7 Woodworking Tools I ...
// Chapters //
0:00 - Intro
00:19 - Accelerator
01:29 - Syringes
02:27 - Putty Knives
04:03 - ROS
06:06 - Wypall Towels
06:37 - Maintenance Oil
07:04 - Outro
// My Amazon Storefront (Affiliate) //
www.amazon.com/shop/everyday....
// Follow Me On Facebook //
/ everydaybuildswoodworking
// Follow Me On Instagram //
/ everyday.builds
// Contact Me //
heyeverydaybuilds@gmail.com
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you. Thank you for supporting my channel!

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@EverydayBuilds Год назад

Do you have any Rubio Monocoat tips or tricks? Share them below 👇👇👇

@randalblair Год назад

very helpful, and thank you for the money saving tips throughout the video.

@EverydayBuilds Год назад

You’re welcome!

@realpdm Год назад

Thanks for the tip on the Wypall towels. Picking some up with your link thanks.

@EverydayBuilds Год назад

You’re welcome! And thank you!

@maartengeerinck7756 8 месяцев назад

Great video! Straight to the point. Thanks man

@EverydayBuilds 8 месяцев назад

Thank you!

@MOJOsKrazyKitchen 16 дней назад

great video

@pjmullen6787 Год назад

That's a great tip on using the plastic putty knives as the spreader. Just picked some up, about to use Rubio for the first time today.

@EverydayBuilds Год назад

You’re gonna love it! 🙌

@coreychristenson6500 8 месяцев назад

Great video!

@EverydayBuilds 8 месяцев назад

Thanks Corey!

@cesarcolli1042 2 месяца назад

Great tips. I want to paint my cabinets at home . Thanks a lot!!

@EverydayBuilds 2 месяца назад

You’re welcome!

@johnschaffer5818 10 месяцев назад

Nice work 👍

@EverydayBuilds 10 месяцев назад

Thanks John!

@justinmetzler2532 3 месяца назад

Great info.

@EverydayBuilds 3 месяца назад

🤙

@roberthiday3342 5 месяцев назад

thanks. very helpful.

@EverydayBuilds 5 месяцев назад

You’re welcome Robert 👍

@davidjones8070 7 месяцев назад

I ve had Syringes in my garage shop for awhile now and theyt also make great glue applicators as well. I experimented with a one to one finish on some decorative boxes and you are correct. They turn out the same. Great video. The money saving tips on the towels are a bonus.

@EverydayBuilds 7 месяцев назад

Awesome! I’ll have to try them with glue. Thank you! 👍

@rollingstone3017 Год назад

Those are some really great tips! Wow. Thanks for this.

@EverydayBuilds Год назад

You’re welcome!

@TheKruizr 7 месяцев назад

I'll be trying Rubio for the first time on new cabinet doors (I'll be making) for my kitchen, I've seen it used many times and the results look amazing, your video is a great for learning how to use it and what you need to do it, thanks! 😊👍

@EverydayBuilds 7 месяцев назад

Glad it helps. Good luck with your project! 😁

@mikeyj990ify Месяц назад

But why? Why go through all this when theres already stain and poly products?

@MA-P1978 Месяц назад

I loved your floating shelf but the finish you chose seemed a lack luster. Hope you liked it. I appreciated all the info in this short video. Tks

@EverydayBuilds Месяц назад

This definitely wasn’t my favorite color for walnut. I much prefer Rubio pure.

@2nd-place 2 месяца назад

On walnut you should use two coats for any visible surfaces. It soaks it up and you get a much better finish that isn’t so flat and is more like satin. Their maintenance oil doesn’t do much.

@christopherdeangelis6096 2 месяца назад

lol dude just watched the blacktail vid and is now spouting this like it’s something he discovered himself

@drvwoodworks 3 месяца назад

Thanks man. I was tripping out thinking I needed the accelerator, as i was about to start working on my countertop. I do see why they recommend it though. Next time. 👏

@EverydayBuilds 3 месяца назад

You’re welcome 👍

@drvwoodworks 3 месяца назад

@EverydayBuilds after it cures, does it have a hardened feel to it? Or does the surface feel any different from the raw wood feel?

@drvwoodworks 3 месяца назад

I also used a large bondo spreader which worked great with a handy painter brush pad to get the oil deep in the grain which worked great also.

@osamabegain2903 29 дней назад

Thank you..

@EverydayBuilds 26 дней назад

You’re welcome!

@biscuittreewoodworks Год назад

Great tip on using the syringes! I have the same ones and they work great! Have you tried any of the nano coatings on Rubio? I hear it protects better and increases the sheen.

@EverydayBuilds Год назад

Not yet, but I will be very soon 👍

@tylerwinter512 Месяц назад

Nice video! Thank you! Quick question, can you save the mixture? If I mix too much is it okay to put a lid on it and save it for the next project??

@EverydayBuilds Месяц назад

Once you mix it, it has to be used within 4 hours. Thats why sometimes it isn’t always best to mix it with the accelerator.

@tylerwinter512 Месяц назад

@@EverydayBuildsthanks! Good to know!

@huntercutting5643 2 месяца назад

Great video, super helpful. Thank you! What speed setting did you use for the random orbital sander? I need to get one - but want to make sure it has a speed setting that is low enough. Thanks for your attention here.

@EverydayBuilds 2 месяца назад

I run mine on the lowest speed setting 👍

@huntercutting5643 Месяц назад

@@EverydayBuildsThanks!

@michaelpea35 2 дня назад

Thanks for the tips, great video! I was wondering if you have any experience with using rubio on softwoods like speuce or pine? That what my project is made of and I've seen a complaint on reddit about rubio causing uneven staining quite easy.

@alexandrastratanphotographer 9 месяцев назад

I applied cornsilk, that is what it says on the bottle, the hue is really nice what I am looking for on plywood for a small countertop, I am wondering if this will work on the edge banding as well, ty for the directions it worked very nice and it looks well on the edges also, the texture it leaves is very smooth I am noticing

@EverydayBuilds 9 месяцев назад

Glad it worked well for you! It does work on edge banding as well 👍

@alexandrastratanphotographer 9 месяцев назад

ty@@EverydayBuilds

@jeffratino5456 3 месяца назад

Thanks for this video, got some great tips. Question: If I were going to apply a natural bee wax finish, should I wait the 7 days. I did this on my first project I used with Monocoat and it gave it a nice low lustre smooth finish and didn't change the color.

@EverydayBuilds 3 месяца назад

I would probably wait for it to fully cure and then apply the bees wax. I’m not sure if that’s the right way, but probably what I would do.

@jeffratino5456 3 месяца назад

@@EverydayBuilds That's what I'm doing. Today is 6 days. I'm going to wax it today or tomorrow. Gives the piece a nice smooth finish and the slightest luster.

@theofarmmanager267 7 месяцев назад

I’ve used quite a lot of Rubio and have no issues except for the cost. Now, if there were no alternatives, then it’s pay the price. But I was very interested in the comparison review undertaken recently by the Wood Whisperer. The final conclusion was that you could get the same finish at a much reduced price by getting Natura Onecoat. Now, Natura Onecoat is not available yet here on the UK but I trust the Wood Whisperer and so will be getting some as soon as it comes here. For you lucky people on the US, I think you can get it now (but I don’t know how widely). If it were me, I would ask your normal supplier to get some.

@EverydayBuilds 7 месяцев назад

The cost can be a tough pill to swallow. There are a lot of competitors popping up at lower price points. So hopefully that will make wax/oil finishes more affordable in the future.

@theofarmmanager267 7 месяцев назад

@@EverydayBuilds it does seem that the consumer has been taken advantage of here. If you want a premium brand, then your product must excel above all others. It does seem that the market take up of 2C over 1C is quite low. That surprises me as, for me, the jock curing of 2C allows me to safely move coated timber (essential in a smaller shop) and prevent dust ruining the finish. I would think that there are quite a few innovations yet to come in the HWO market giving us, the consumer, better choice of better product at less cost

@chrisweigand1817 8 месяцев назад

I had to pause 1 min in. man!!! I just threw out the finish and the accelerator kit because the the small tin was ruined. it was crusty and hard and I thought it was like epoxy guess , without the hardener its no good. what a bummer for me. thank you and now back to the vid

@EverydayBuilds 8 месяцев назад

Those hardener tops like to get stuck on as well. But you can absolutely just use the finish on its own 👍

@Zamboni-0805 Год назад

Whats wrong with the Tool Box Shop Towels? I use them along with WypAll...love them both for different jobs. Can I have the roll you through in the garbage can?

@EverydayBuilds Год назад

Lol, that may have been for dramatic effect. I found that the shop towels were leaving behind a lot of lint and they just don’t have the same quality as the wypalls. Just my opinion.

@andrewadar 2 месяца назад

Thanks so much for this video! Just wanted to ask though - can you use Carbon Method or N3 Nano or BF Ceramics with Oddies Oil? Everyone seems to do videos with those after applying Rubio or Osmo but what about Oddies? Really appreciate your advice - trying to figure out if you can make a food safe finish more durable

@EverydayBuilds 2 месяца назад

I don’t have any experience with Oddies, so I’m not sure. Sorry.

@erichaskell 7 месяцев назад

Would rubio be good on white oak if I did not want the wood to darken? The best I've found that does not darken is water based urethane. Great presentation.

@EverydayBuilds 7 месяцев назад

If you want to keep the natural color of the white oak, I would recommend Osmo clear or Rubio Pure (this will add an amber hue). Osmo clear will change the appearance the least.

@erichaskell 7 месяцев назад

@@EverydayBuilds Thanks

@glacialimpala 5 месяцев назад

No no, NO, Pure darkens a ton and gives a lot of warmth! Natural is recommended shade for white oak, but in my experience some other options should be considered. There are several subtle shades, like cotton white, sky grey etc. All shades darken and deposit a bit of pigment at the same time (since Pure is base for ALL shades, so all shades have that darken+yellow effect, which is then topped by accompanying pigment), cotton white has a ton of pigment that is very light beige, like yellowish white so it makes white oak look naked. Sky grey has ever so slight grey pigment that won't make the white oak look grey at all... @@EverydayBuilds

@rgweld 11 месяцев назад

any advise on using rubio on Douglass Fir? we are getting a lot of weird interactions with the wood leaving a bad mottled look...

@EverydayBuilds 11 месяцев назад

I’m have never used it on Douglas fir, so I’m not sure why that would happen. Did you water pop it before applying the Rubio?

@user-xs8uf4vv6x 9 месяцев назад

Hi I have a jarrah live edge table with a Rubio Monocoat finish it’s starting to fade a bit Do I just sand and reapply with Monocoat

@EverydayBuilds 8 месяцев назад

I have never done this, but I have heard of others doing this with good results. I would say to try a test area and see how it looks. Maybe try it on the bottom, in case it doesn't workout.

@danthechippie4439 10 месяцев назад

Can I ask_ how did you decide on what colour to use? I'm building a tool chest from oak venere plywood and want to finish it in rubio. I was thinking dark for outside and just clear on inside if there is a clear one

@danthechippie4439 10 месяцев назад

Is it OK to use rubio on popular?

@EverydayBuilds 10 месяцев назад

Rubio has a page on their website that shows you what their colors look like on different species of wood. And you can absolutely use it on poplar (but they don’t have poplar colors on the website). www.rubiomonocoatusa.com/pages/oil-plus-2c-colors?species=white-oak

@PLaTerra Год назад

Thanks. Possibly a rhetorical question BUT do you use the syringe once, then throw it out?

@EverydayBuilds Год назад

Yes. You could try to clean it out and use again. But it’s not worth the effort for me, lol.

@PLaTerra Год назад

@@EverydayBuilds Thanks. I am generally low on patience so I’ll follow that advice. Keep the vids coming. Very sensible and educational

@EverydayBuilds Год назад

@@PLaTerra Great, will do! 👍

@leonardbutler9338 Год назад

Hi. I make a lot of tea boxes. I like to keep the inside "food safe". Is Rubio Monocoat considered non-toxic/food safe?

@EverydayBuilds Год назад

It is good contact compliant. Here is a link that explains it in more detail www.rubiomonocoatusa.com/pages/food-contact-compliance#:~:text=Rubio%20Monocoat%20Shows%20Food%20Contact%20Compliance&text=You%20can%20apply%20it%20to,used%20in%20contact%20with%20food.

@leonardbutler9338 Год назад

@@EverydayBuilds thank you for the thorough reply!

@EverydayBuilds Год назад

@@leonardbutler9338 you’re welcome!

@joshuakneisley2939 5 месяцев назад

Wish i would have watched this before using it for the first time 😂

@EverydayBuilds 5 месяцев назад

Me too, lol 😂

@DavidOlivier-ul2yz Месяц назад

I want to treat. White oak cabinets but dont want the raw colour of the eood to change! Which product will be best to use?

@EverydayBuilds Месяц назад

Rubio Pure or Osmo Clear 👍

@mattheworoark1459 Месяц назад

The maintenance oil only comes in 3 options. White, black, or pure. How do you know which one to get?

@EverydayBuilds Месяц назад

The way I see it, you pick the maintenance oil that matches the base tone of your finish. If your finish has more of an amber tone, go with the pure maintenance oil. If the finish has a lighter white tone, go with the white maintenance oil. And if the finish is dark/black, go with the black. 👍

@picklemetimbers3003 24 дня назад

How long of a working time does the Rubio have once the 2 parts are combined?

@EverydayBuilds 22 дня назад

4 hours I believe 👍

@picklemetimbers3003 22 дня назад

@@EverydayBuilds Thanks! I will be using Rubio for the first time this week.

@MakerBoyOldBoy Месяц назад

These types of products are a weak version of the old solution to bond with wood cells for a more natural looking limited protective finish. The old solution is two part epoxy thinned with acetone. The protection increases with the thickness of resin in acetone solution.

@user-xl8gi3xl1d 8 месяцев назад

How long does does it take for the Rubio to dry

@EverydayBuilds 8 месяцев назад

I usually let it dry over night and then it’s pretty safe to handle. But for full cure, it’s 7 days with the accelerator 👍

@jonr6540 Год назад

It took me two or three applications to find out that I’m very allergic to Rubio. I always wear gloves regardless but it seems the reaction of the accelerator and the oil was making the skin on my face and arms break out really bad. Worth mentioning in case anyone else is having that problem but can’t find the causal agent.

@EverydayBuilds Год назад

Thank you for sharing. I typically wear gloves as well, but I ran out recently and haven’t restocked 🤦🏻‍♂️

@YTubeSDD Год назад

I've not used Rubio monocoat, but I've heard that you can't repair it, meaning reapply it, if you've used the maintenance oil. Doing a spot repair won't blend in if you've used the maintenance oil.

@EverydayBuilds Год назад

I have heard that as well, but I don’t have any personal experience with whether it can be done or not 🤷🏻‍♂️ Maybe others can chime in.

@jaderene 11 месяцев назад

You actually can repair Rubio Monocoat, because it’s an oil finish, you just have to sand the area in need of repair, basically a spit repair, compared to polyurethane finishes, we’re you have to sand the entire surface before re-applying the finish!

@glacialimpala 5 месяцев назад

Also you have to vacuum very well after the sanding. The customer who is doing maintenance may not know that vacuuming is essential part before application. @@jaderene

@zachmartin9990 5 месяцев назад

3 parts Rubio to 1 part accelerator.

@rastamon5969 5 месяцев назад

No scotchbrite and sander needed. Paint on and wipe off. Same result

@EverydayBuilds 5 месяцев назад

I disagree.

@RobertL39 11 месяцев назад

Sorry, I'm confoosed. You applied the Rubio, let it dry and then rubbed it off. Fine. But then when you buffed you put on more Rubio. Is there some reason you chose to put it on twice rather than just buffing it in when you first applied it? If it's dried (but not cured) after the first application, why put on more? EXCELLENT video otherwise with some great tips! 😄😄

@EverydayBuilds 11 месяцев назад

I only applied a single coat to each side. I just showed two different ways of doing it by hand or with an ROS.

@RobertL39 11 месяцев назад

@@EverydayBuilds Thanks!

@5280Woodworking Год назад

Respectfully I disagree with needing plastic syringes. Eyeballing the ratio in a paper-cup is sufficient and saves our planet from more plastic. I’ve applied gallons this way. Rubio is my go to finish! My one trick is coffee stir sticks. Super cheap and work great! Also always water pop before final sanding!

@EverydayBuilds Год назад

Completely understand. And thanks for the great tip, I’ll have to pick some of those up 👍

@aaronblackford981 Год назад

I would say, having used it limited, starting with the syringes isn’t horrible idea to limit mess ups. Which will cause less harm caused to the planet in remaking same thing three or four times. Once people get used to it, the change to coffee stirs. Or maybe just popsicle sticks, or maybe chop sticks. They are small, made of extremely renewable wood, and not plastic.

@Samlol23_drrich Год назад

I generally buy only styrofoam cups

@bartgoldberg9520 8 месяцев назад

When I am going to use water based finishes, I always water pop 2x times. Do you need to do that for Rubio as well, or is one water pop sufficient?

@5280Woodworking 8 месяцев назад

@@bartgoldberg9520 I will sand to my final grit, water pop and sand again. Works great.

@dj2028 Месяц назад

You said the ratio of 1:2 vs 1:3 doesn't matter. Sorry, but that is incorrect. The ratio hugely affects curing time.

@EverydayBuilds Месяц назад

It is 1:3 and you are correct

@williampettersen5348 6 месяцев назад

Coulda shown final product. Uninspiring.

@EverydayBuilds 5 месяцев назад

Checkout my other videos. I apply Rubio a lot 👍

@f.d.6667 Год назад

It's pretty amazing how the pigmented Rubio manages to make the wood look completely dead with such little effort... if you want to make a nice workpiece look like PVC, this is the way to go!🤣

@EverydayBuilds Год назад

Lol, I guess it’s not for everyone 😂

@f.d.6667 Год назад

@@EverydayBuilds 👍👍👍

@tnabbott 5 месяцев назад

Couldn't you check whether its 2:1 or 3:1 before making this video? You are supposed to be giving the audience "tips and tricks" right? "Go ahead" and read the direction before making your video.

@EverydayBuilds 5 месяцев назад

👍