How to Finish a Table - How to Apply Rubio Monocoat

Подписаться 2,7 млн

Просмотров 1,1 млн

50% 1

How to finish a table by applying Rubio Monocoat. In this video, I’ll show you how to apply two coats of Rubio monocoat. I discussed this technique with other makers as well as Rubio themselves. Rubio says most woods only need one coat, however, you can apply a second coat to species like walnut. There are some tips and tricks you need to know to avoid some potential problems though. Since this is designed to be a one-coat finish.
Want to build your own epoxy table? Check out my epoxy table virtual workshop: workshops.blacktailstudio.com/
Related videos and blogs:
How to sand wood: www.blacktailstudio.com/blog/...
Step by step guide: www.blacktailstudio.com/blog/...
Items used in this video:
Rubio Pure 2C (this one): amzn.to/2OMUMYh
Rubio wood cleaner: amzn.to/2OQ4GbH
Rubio maintenance oil: amzn.to/3jtJmqt
Festool Sander (6"): amzn.to/32RpWWR
Dust extractor for sander: amzn.to/2E4xomU
Spreader: amzn.to/2CClcta
Light stick: amzn.to/3jpxaHc
Photography light: amzn.to/32MPsfI
1/8" roundover: amzn.to/2X3sCwT
Trim router: amzn.to/2WHp9np
Syringe set: amzn.to/3fVxMSP
Gem Buffer/sander: amzn.to/2CClHU4
Gem buffer: amzn.to/39kRZPk
Buffing pads: amzn.to/2OPDQQM
Mirka abranet: amzn.to/3eTQ1Xk
Maroon pad: amzn.to/2OM6ySy
Table base made by: www.builtbysteele.com
blacktailstudio.com/
/ blacktailstudio
/ blacktailstudio

Хобби

Опубликовано:

22 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,8 тыс.

@2asere 3 года назад

Cam, awesome video AS ALWAYS, Question, How much drying time between 1st and 2nd Rubio coats? Thanks a lot

@BlacktailStudio 3 года назад

Oh, good question! Should have mentioned that. 24 hours.

@2asere 3 года назад

Thanks a lot

@lpelch 3 года назад

I finished wood floors for forty plus years. The last ten we used hardwax oil. Rubio was one. The temptation is always to go with a couple thin coats. With furniture that might be best. You can, however saturate the piece more on the mono coat. Leaving the finish in contact with the wood for 10 or 15 minutes let’s it penetrate and fuse with the cellulose fibers in the wood. We always thought of working it into the wood until no more would go. Even so, it is amazing how much coverage you get from a liter. Also worth consideration is Woca Diamond. Using white oil on distressed wood was a go to for us. Love your work, Cam.

@BlacktailStudio 3 года назад

Thanks Larry! I’ll definitely check that out

@tonyarend9234 3 года назад

Cam I was wondering if it is ok to wait longer than 24 hours between coats? I ran out of product after the first coat, now waiting for more to come in. Thanks

@michael.schuler 2 года назад

Cam, thanks for these great Rubio videos (and your many others.) Just finished with Rubio for the first time on a pretty spectacular bookmatched walnut free edge dining table, and before each and every step of the finishing process I reviewed the applicable segment of your video as tutorial. Your brief summary captions at the end of the video were particularly useful. I got a beautiful natural result and felt in control of the process throughout --- no doubt avoided a number of newbie errors that could have turned my peaceful maiden voyage into a frantic nightmare. It felt like you were right there giving me instructions mano a mano. Thank you!

@jerryjohnston7575 11 месяцев назад

After watching the video advert i was still skeptical. But when i finally downloaded the plans ru-vid.comUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

@lynetteyoung9777 2 года назад

Cam, Thank you for making these videos. I enjoy watching wood, especially walnut, come to life through your expertise. I have loved walnut wood since I saw an Aunt harvest it from her property and have it made into her kitchen cabinets. I was a teenager then and finally when I had my own kitchen remodeled at the age of 50, I had my cabinets made from walnut. I was asked what kind of stain I wanted them to apply and I felt surprised, wondering why anyone would do that to walnut. I replied that I wanted something clear so I could see the wood. My refrigerator, trash compactor, and dishwasher are fronted with walnut. It is a most beautiful room. Watching you work with wood is such a joy. Again, thank you from Syracuse.

@stanleymischol6084 2 года назад

Cam, thank you very much for all of your videos. They are really instructive and have pushed me further into woodworking than would ever have believed.

@hiddenvalleyprojects9218 2 года назад

You always blow me away with your projects!! Such a inspiration!! Thank you! P.S. Thank you for never skipping a step.

@JaytheP 3 года назад

Cam, using your steps I made my walnut butcher block look the best it ever has. I’ve used tons of finishes and the Rubio (after 2 coats) looks insane. I think using maroon pads/steel wool after the first coat makes the second coat wipe on like magic. So beautiful, thanks to you.

@BlacktailStudio 3 года назад

Agreed!

@rjwohlman Год назад

Coming back to get my tips on how to finish my table. I sincerely appreciate this RU-vid page for help guiding me in building my first epoxy table. It's turned out beautifully with hardly any major errors. Thank you buddy keep up the excellent work... and then sharing all your great tricks!

@brianl9740 2 года назад

Hello Cam, I’m just finishing my first live edge desk, thanks to your great videos here it’s going to be lovely. I purchased the slab from Art in Sisters and he referred me to your videos as I was a complete neophyte in wood working. One suggestion I might offer from my experience is I would use black caulk next time. I did follow your instructions to use mold release for my very porous slab, with good results. But I noticed hairline white caulk nestled in the fibers. I used a razor pen blade to get out as much as I could. On my first coat of Rubio the little hairline caulk pop’d to become visible. I think a black would blend in better and resolve this issue. You’re great and I truly enjoyed all the many videos of yours I’ve watched.

@michaelfmarcos Год назад

Man I'm about 2 months into my first epoxy table, tonight I'm about to do the Rubio finishing, and I just have to say thank you for all your content. I get into a lot of hobbies and people usually ask where I learn from. My usual response is "RU-vid University" but for all the stuff I've been doing over the last couple months, my answer has been Blacktail Studio. I've been woodworking for 2 years and learned a lot from a lot of content creators, but this project has been particularly rewarding and I have, effectively, you to thank for it. Thanks so much for all you do!

@coltonstallcup2343 Год назад

I’m about 2 months into my first one as well. I don’t know if you built a second one after the first. But if you did, did it go more smoothly? More quickly? TIA

@mosesfisher4415 3 года назад

Cam, I made it to the end like I do every time. I don’t have a question just wanted to let you know you are doing a fantastic job of instruction and complete information. 🤘

@BlacktailStudio 3 года назад

Thanks Moses! You’re a good man

@jodytho 2 года назад

Cam thanks for generously sharing your techniques. i agree with your statement about stains. I love how the rubio just enhances the natural beauty of the wood

@toodamnmanyprojects7094 2 года назад

Hi Cam. I’m really enjoying your videos. You’re not only a master woodworker but also a highly talented choreographer, director and cinematographer. First compliment is about your choice of lights. I grew up in the film business in Hollywood. Why didn’t I think of that? Fabulous idea! Second, I’m a wooden boat guy. Restored many over the years. I’m stuck on my latest project due to medical issues. Dropping the table on your head was something I can relate to. One additional surgery and recovery and I’ll be back at it. Years ago I did a kitchen remodel with butcher block countertops. They were fantastic. Now I’m in the middle of a house remodel. Seriously thinking about slab countertops. You got me thinking. Just wanted to say thank you and let you know how much I’ve learned from and enjoyed your videos. Keep up the good work!

@montesimpson7092 3 года назад

I feel so motivated to start a project everytime I finish one of your videos 💡✏📐🔨

@ruibento9840 2 года назад

I really like woodworking I had a crafts class and we were assigned to do projects in school

@brucedutchuk7963 3 года назад

Love your work, as most everyone does!! I would love to see the video where you review different finishes. A contrast between higher end products and, of course, lower tier products.

@BlacktailStudio 3 года назад

I’m in!

@clivine924 Год назад

coating video's are the best. I'm a hardwood floor guy and Rubio is known for showing sanding flaws. great job. fun and knowledgeable watch. I love coating hardwood and now I'm getting into tables for fun. great work.

@genevievec9427 2 года назад

Your amazing Cam!!! Thanks for giving a old lady some new tricks on working with wood. Great job on the Rubio, I'm going to give it a try

@rogdotcom1 3 года назад

Cam, holy crap, love the legs on that table, absolutely awesome 👍. Great video on the finishing, learned lots !! Thanks

@BlacktailStudio 3 года назад

Thanks man!!

@dwayneford1990 3 года назад

I think your finishes are classy, timeless and perfect for the wood species. A lot of people like the very shiny epoxy flood coat look. I think that's just a fad or something that might be fine for a bar top but for these big beautiful tables your finishes are the best I've seen.

@BlacktailStudio 3 года назад

Wow, thanks Dwayne. Really appreciate that

@bryantpollard1390 3 года назад

Love your videos, just started pouring epoxy 6mos ago and learned everything from your videos, thanks cam you're a very talented woodworker and an excellent teacher!!!

@BlacktailStudio 3 года назад

Love it!

@cathyhedin6538 Год назад

Cam, thank you so much for this video. I have just finished my first epoxy table, well to the point of applying the Rubio monocoat, or so I thought. I'm glad I watched your video before I did. Gave me the extra confidence I think I was missing.

@jkmenegay 3 года назад

Cam, stunningly beautiful. I'm sending this to my son who likes to tinker with epoxy tables/surfaces; I'm sure he'll appreciate it as well.

@BlacktailStudio 3 года назад

Awesome!!

@Ian_Hay Год назад

Hi Cam. Question: in one or two of your later videos, you mention that you’ve sanded up to 220/240 rather than sticking to the max 180 (let alone the Rubio’ recommendation of max 120). Have you noticed any adverse effects and/or benefits to shading a notch higher than 180, i.e. 220/240, when finishing with Rubio Monocoat?

@dr.emilschaffhausen4683 2 года назад

Walnut and maple. My go to woods, especially in burl! Beautiful table. Thanks for your hard work.

@harthenry Год назад

Thanks for putting every item you used in this video on your read-me section. Makes it easy to purchase the right stuff for the job.

@dirtydandinoman8902 3 года назад

I dont come here to learn to build my own table, I come because its -Relaxing -Informative -Fun -Nice to watch

@BlacktailStudio 3 года назад

Can’t hope for any more from a viewer!

@unperrier5998 3 года назад

Cam, I jump straight to the end of the video to see what you want us to write in the comments :) Nice tutorial, thanks for posting it.

@BlacktailStudio 3 года назад

Cheater! Don’t blame you though 👊

@elainebiggers9915 3 года назад

That's awesome Cam!! I mostly use stain! I have seen Rubio monocoat but never used it. I'm definitely gonna try this.

@TOXICSHARK35 2 года назад

It’s amazing to have the quick bulletin points at the end! Thanks Cam!

@jamesmatthews1865 2 года назад

I prefer having your narrations. With you explaining what and why you're doing somthing, . . . I too, can learn! Keep up with your videos as you have. I won't ever complain!

@brendaharvey8471 3 года назад

Cam, first off I love the table. Second, I know you have used Osmo in the past, which do you like better?

@BlacktailStudio 3 года назад

Liking Rubio better these days.

@stephenrobinson8250 Год назад

Cam! I just bought a buffer like yours. What specific pad do you use to buff with? Do you throw away the pad after each use or do you reuse them? If you reuse them, do you do anything special to them for storage? As always, love the video. You never disappoint.

@stuart6478 3 месяца назад

Read the instructions

@willjennison673 2 года назад

Cam tomorrow my son and I are taking some spalted maple we cut and milled to the kiln.!when we get it back your videos have given us the courage to try our first table. So thank you!

@unclebob8746 3 года назад

Cam, just found you. Great videos; love that you talk through the process and NO music. Subscribed.

@dannybruce4142 2 года назад

Cam, as I stated in another comment, I've had a lot of experience sanding and buffing many projects. Two things I would suggest. First, always use a mask and wear full body protetion like a zip up worksuit. Looks goofy, but it's worth it. Even when sanding wood. After two decades of working I had a sudden allergic reaction to wwood resin produced by sanding. If I hadn't been wearing a mask I woudn't be here today. My doctor said it happens. Also, I'd suggest to anybody who is interrested in perfect finishes to make friends with a local bodyshop as they have great knowledge and can advise on sanding and buffing tools and tecniques and materials that can result in spectacular results.

@MrRapeyou1 10 месяцев назад

Nerd

@M.L.Knotts 9 месяцев назад

@@MrRapeyou1dude... Your name.... WTF

@749Giovanni 7 месяцев назад

Thanks I went commando just sanded lol but your right I should of wore a mask

@stuart6478 3 месяца назад

Sounds psychosomatic nerd

@alexsackett3626 3 месяца назад

@@MrRapeyou1that’s what I came here to say

@jeffhermenet144 3 года назад

Cam, you're really selling me on this Rubio Monocoat I may have to give it a go. One thing I would be curious about if you have a smaller piece to test on - how does it hold up to some heat? I'm looking to build a kitchen table for a friend in the near future, and lets say someone sets down a plate that has some hot food on it, or maybe someone set something down on a pot holder that was too small and transferred some heat. Could be an interesting comparison!

@BlacktailStudio 3 года назад

I’ll add it to the list!

@utube1818 3 года назад

I can't comment specifically on Monocoat, but can say as a French Polisher / Sprayer of 30 years I would not trust any oiled finish to hold up against the heat or general wear and tear a kitchen table top has to withstand. I use either a 2 pack acid catalysed lacquer or a two pack polyurethane, both are spray applied and both need the correct type of mask. But they will withstand more than just a hot plate, my own table has been done with PU its over 10 years old and the finish is perfect.

@jeffhermenet144 3 года назад

@@utube1818 Awesome thank you for that information!

@foxyepoxy602 2 года назад

@@utube1818 Agreed. I use Rubio Monocoat mainly for wooden doors. Mainly because the finish will not peel off over time in a snowy climate. You can sand, and refinish it without having to strip the finish. Lacquer or catalyzed Polyurethane for table tops

@markives4642 Год назад

Cam you only sanded the black poly 220 the next video i watch they will sand thr river to 300O grit ?

@toddwebster4977 Год назад

Cam! Beautiful work! This really is the fun part for me. I enjoy the wood working and creating something. I really enjoy the sanding to get a nice surface. Then putting finish and seeing the wood pop out. It makes all the work so much fun to do!

@512bb Год назад

Wow, thank you! I have always applied hand rubbed tung oil finishes but have become intrigued by the Rubio. As I have never seen it in person & couldn't really get a feel for the actual look in all the videos I've been watching... until yours that is, superb photography. I absolutely love the level of sheen, it actually looks like my go to Old Masters tung oil varnish, simply beautiful.

@thomasblake7672 2 года назад

Cam, great video. Always enjoyable to make it to the end. In your Osmo videos you sand to 320, but Rubio only to 180. I haven't ever stopped at 180 and applied finish on any previous tables - how does stopping at 180 affect the look and finish of the epoxy? If applying Rubio, should I sand the epoxy to 320 separately and the wood only to 180? Thanks in advance.

@manchannel6900 Год назад

Rubio recommends 150max.. howd your project turn out?

@thomasblake7672 Год назад

@@manchannel6900 Turned out great - daughter loved her table. I ended up at 180 on the wood and 320 on the epoxy and looked pretty good. Can't decide whether I like the Rubio Monocoat finish or Cam's easy gloss finish better, but I guess each has its place.

@olegx.8173 5 месяцев назад

@@thomasblake7672 have you had any issues with Rubio bonding to epoxy? Rubio reps claim that their oil bonds only to bare wood.

@filofoxrocks 3 года назад

Cam, the finish looks great! I excited to try it out myself. For me, it's the first time trying out RMC after years of Osmo. What grit does the maroon pad have, which you use to sand in between the coats? Cause I'm finding different 3 grits for maroon pads: 120/150, 180/220 and 320/360...

@terekschultz1230 2 года назад

So I just used Rubio's for the first time today and followed your video. It went great. Thank you. I bought a cheap buffer to use for this project. I'm really happy I did. I can't imagine doing it without one. The only mistake is I over estimated how much I needed and had a bit more waste that I wanted since it is so expensive. One thing I've found to get a really good sanding is starting lower like 60 and doing each grit twice up through 120. Then only need once for 150 and 180. It seams to do a great job of getting rid of all pigtails and any other imperfections. Not that you need any suggestions. You work runs circles around mine.

@Vultite 2 года назад

Thank you for making this video, I just did my first Rubio monocoat project and I'm at the point of a second coat. I think it's better to do 2 coats as well because I find it nearly impossible to get the sanding 100% without needing a minor touch up here and there.

@The_Ol_Bizzaroo 2 года назад

Cam, I'm wondering what type of surface to put my slab on so that when I flip it over, to do the 2nd side it doesn't stick or ruin the finish. Also, how long to wait for it to dry before flipping it for the 2nd coat. Thanks!

@gsallis85 2 года назад

What surface did you use in the end?

@The_Ol_Bizzaroo 2 года назад

@@gsallis85 haven't done it yet. I'm pretty reluctant to do both sides at once. My slabs are well dried and have acclimated for 2 months. I think I'm going to do the bottom and then flip it over the next day and do the top

@brianlynch5896 2 года назад

Have you ever tried Rubio on olive wood

@georgebeauchemin6076 2 года назад

great work! I love the this look with this product! I dont usuall water pop till the last grit. Have you found that water popping in between all grits is better??

@buckboy1234 2 года назад

I have done it using small plastic triangles so the table sits on the points. No issues. it's on the bottom anyway

@vangiefich 2 года назад

Your tables are so gorgeous! I love the wood/ epoxy combination.

@jacobharris2957 2 года назад

sheen and finish look incredible... looks perfect

@rhinopaul115 3 года назад

Cam Test the finish with slice of hot pizza on a paper plate. Never fails to leave marks on my table

@BlacktailStudio 3 года назад

Oh, good call!

@petert3355 3 года назад

@@BlacktailStudio Cold beer without a coaster is another test I do. It will also usually show a mark.

@kennetha.goodwin336 3 года назад

I thought if you allowed the Rubio to cure for a week that it wouldn’t leave a water ring if you wiped it up and waited 10 minutes for the remaining dampness to evaporate.

@Delta-tg9ge 3 года назад

This one comment triggered my OCD

@patokane1430 3 года назад

Cam, absolutely love your work and your videos. One thing I’m not clear on. Do you sand the top to 180 grit as you did on the table bottom or do you go finer? Thanks. Keep the videos coming.

@GJ11598 3 года назад

When you say you immediately flip the table, do you put anything underneath so the already finished side isn't compromised?

@BlacktailStudio 3 года назад

A couple soft pads to elevate it some. Good question!

@brianwolfgang9312 2 года назад

Could you elaborate on the pads? Thanks in advance!

@johnbarnwell400 2 года назад

Cam …. I have been watching your videos for a couple months now and I finally subscribed because I am just so impressed by your work as well as the way you articulate what you are doing as the video plays … Your videos are by far the best I have seen .. Thank you for all the time you put into these utube videos as I have learned a LOT from you .. I own a pest control company but I am not as involved in the everyday activities of my business as I once was so…. I tinker in my wood shop making smaller tables , book cases, cutting boards , coffee tables , ect… mostly for family or my wife .. lol … just a hobby for me … however …. I plan to make a walnut/ epoxy table one day so your videos have been incredibly helpful to me ! Please continue to make these tutorial videos ! Thanks again from a fellow woodworker down here in the great state of Tennessee ! Keep up the incredible videos ! God bless !

@DevilsChild87 2 года назад

I love glossy tables but there are some that look great just like this one and how this turned out. Beautiful turn out.

@gabrielc6252 3 года назад

6:43 wow, those legs ... is it stable, being that it is so top-heavy?

@BlacktailStudio 3 года назад

Super stable actually

@kapilkohli7773 3 года назад

Cam really want to understand all the finishes it’s getting complicated can’t wait for the finishing video. How does rubio works if you sand it over 400grit?

@ChristopherWilley1 3 года назад

yeah those legs are actually my favorite part of the table, I would love a dedicated video on just those legs and how you connect them all together

@robertm348 3 года назад

Cam -- Great finish! Will be my new "Go To" finish.

@ajgros5248 2 года назад

Cam... Thanks so much for the finish lesson. Getting ready to do a pecky cypress live edge river table and still trying to figure out what finish I want to use. Everything is clear as mud now... LOL... Thanks for the great content!

@willgould9739 3 месяца назад

Cam, thank you for 2nd coat technique. My walnut table was not quite there after the mono coat. I debated leaving it. Glad I did coat 2. Cheers.

@dantwomey 2 года назад

Cam, perfect explanation and perfect finish. Well done!

@stephanelarose9165 3 дня назад

CAN - WOW! As being a rookie that is about to start doing epoxy, to my opinion you said it all. thanks

@bowtietech1757 2 года назад

Cam, watched my first Black Tail video tonight! Loved it! Your ingenuity, artistry, & attention to detail is amazing! To answer your question, the perfect size is determined by either the customer, the purpose, Orr the material.

@bowtietech1757 2 года назад

A video is art. Art determines its own dimensions. when it's finished, it is what it was supposed to be.

@mikeg127 2 года назад

Cam, excellent video. I’m about to do this tonight on my epoxy table project. Thanks

@mrlondon963 2 года назад

Such a beautiful piece, a work of art.

@larryshipman248 3 года назад

cam thankyou for finishing video with rubio . Always wondered how you got these amazing finish.

@garrettjones8017 3 года назад

Every single video I've seen of yours has been the most beautiful work. I'm an amateur wood guy but I came across a beautiful slab of black oak and this gave me some inspiration!

@BlacktailStudio 3 года назад

Oh awesome. Good luck!

@JohnReslerpages Год назад

Very nice. Thing I like about this resin table is that it's predominantly wood. The satin, almost matte finish is elegant.

@CustomWoodCreations 2 года назад

Cam, great video! No question this time just appreciate the master class you always give!

@dabralankit 3 года назад

Cam, you are terrific. I have read people recommending you to talk less but trust me its your instructions that keep it interesting throughout. I like watching woodworking videos & fine your the best. You are inspiring me to try something on my own. Way to go man. Cheers!

@BlacktailStudio 3 года назад

Thanks, and good luck with your endeavors!

@robcall123 2 года назад

Absolutely beautiful piece. Can’t say anymore than beautiful. Love your videos.

@ggreene245 2 года назад

Perfect sheen, beautiful table. I love Walnut. One of my favorite species.

@joepsterk5176 Месяц назад

This is really helpful! Love your transparent and honest approach. Keep it up!

@arkansasfasttrailriders9774 2 года назад

Cam what a great talent,, learning so much since I found your site

@anthonyharvey3871 2 года назад

Cam, excellent introduction to applying Rubio Monocoat.

@bettinabarry8423 2 года назад

The finish on the table is perfect!

@JeDxDeVu 2 года назад

Really like this finish looks great and great tutorial on how to use it. I'm a carpenter from Germany and lots of Carpenters here use a oil called complex hartwaxöl for their masterpieces when they become masters. It's super liquid, very easy to apply non flammable and I've never seen a better finish. It's made by a small company in Austria Tirol. They did a presentation at our carpenter school and it was pretty impressive. Cheers from Germany

@skidave74 Месяц назад

Cam, thank you for the thorough demonstration. Working with this product for the first time, it’s going to finish a custom handrail for my basement renovation, plus a few other details. Using mahogany and should look amazing once completed. Thanks for the inspiration as always!

@NEOFROMTHEMATRIX100 2 года назад

Just did my first table top ever, with one coat rubio, maroon pad, then a second coat. Came out fantastically. Thanks for the video Cam, this made me a table that looks like one on your website for 20k.

@BlacktailStudio 2 года назад

Love that Brian!

@dustydave9347 2 года назад

Cam, I love the look of that finish. Looks great!

@pattil7947 2 года назад

CAM! Omgoodness! Such gorgeous tables you create! Such Art oh, so Beautiful! All your tables! You do a great job taping your videos & great editing also! So generous of you to show all your tricks of your trade! Thank you! Your Awesome Bro! 👍👍👏👏👏👏❤️🙏👋😁

@j1303901 3 года назад

That is one of the best looking slabs I have ever seen. Great job!

@BlacktailStudio 3 года назад

Thanks jake!

@goldcarps 2 года назад

Cam even your video is a work of art. Thanks for making them 😊

@donnadimeo 2 года назад

Cam, Thanks for sharing you knowledge and experience! I’m going to give this finish a try. I make jewelry boxes.

@MixingGBP 2 года назад

Very cool. I will try it on my next walnut table project!

@mcmenz0388 Год назад

Cam. This table is unreal. I love it.

@cayerman1 2 года назад

Cam, Great video! We use Monocoat at my work on pretty much everything and it holds up great! We actually use a bees wax spray to freshen up pieces that are used daily and it looks great.

@rical1 Год назад

Cam, thank you so much for this video! Awesome tips! I was less than thrilled with the first coat on mahogany desktop. Applied techniques and am blown away! Catch you on your next vid. Bob

@mrskwrl 2 года назад

Cam, I love your honest videos. That's all.

@ahujeffrey 2 года назад

I actually like the look of the matte black. However, the final final was certainly outstanding!

@deborahlatham9359 2 года назад

Great advice on the stains

@ronaldpullen4685 Год назад

Beautiful table. I love the finish.

@RoseStephens-mo5jb Год назад

Cam beautiful table. just the right amount of sheen. love the style of table legs on this as well.

@dabralankit 3 года назад

Cam - i have watched a lot of your videos. You are doing a fantastic job from video, photos, woodworking to the way you talk, instruct, recommend. Keep it up mate!

@BlacktailStudio 3 года назад

I’ll try!

@Karl-by6ub 2 года назад

Love that Sheen, bring out the depth 👍🏻

@brazilsurf Год назад

Cam, first of all thank you for sharing your experience with the product and great video. I am actually with Rubio Monocoat USA.

@joseflores5989 Год назад

Man that's amazing I wish I can be close to you so I can learn from you Your knowledge about those projects Amazing keep doing it for all of us

@mikepagliei426 Год назад

Absolutely beautiful. That’s a proud piece!!

@Brileyjamison 3 года назад

You make some of the most gorgeous tables I’ve ever seen

@BlacktailStudio 3 года назад

Wow thanks!!

@fabriziodorazio511 3 года назад

Rich over shine any day Great job Thank you Cam

@MileyO Год назад

Hi! Cam. Needed a lesson how to use Rubio monocoat. About to use it for a first time. I probably watched all your videos several times. Love your work.

@LiloUkulele 2 года назад

Beautiful...wonderful finish. as an instrument maker my finishes are nitro lac and french polish. I have a Bubinga table to refinish...will be trying rubio monocoat...

@TheWind213 3 года назад

The first table is one beautiful table, great work.

@BlacktailStudio 3 года назад

Thanks!

@herbertaparicio9108 2 года назад

I really enjoy your videos and always learn a little new trick to apply or save in my “toolbox” for my own projects. As a woodworker I never stop learning from other craftsmen. Thank you 🙏

@bucknut6620 3 года назад

Cam, your videos are packed with info and your knowledge thank you

@BlacktailStudio 3 года назад

I try!

@jimsegraves4447 Месяц назад

Cam, this table is beautiful!! I was searching about how to apply Rubio Monocoat and came across your video. I am thinking about using it for a future project. Thanks for sharing.

@gordycummings 2 года назад

I just discovered your site. Great beautiful work!

@paul11273 Год назад

Cam, this was the second time I have watched this video. Finally getting ready to make the plunge and Rubio, so I will probably watch it a couple of more times! Thanks for all your content.

@BlacktailStudio Год назад

I’m working on a new version of this video now if it helps

@paul11273 Год назад

@@BlacktailStudio sounds good! I'll be looking for it. Thanks for the heads up.