How to Apply Silicone - the COMPLETE Pro Guide

Подписаться 402 тыс.

Просмотров 4,6 млн

50% 1

As the title suggests, this video contains literally everything you need to know to take you from a beginner to a professional siliconer!
You can become a Charlie DIYte Patron here / charliediyte for exclusive behind the scenes content and access to my Discord chat forum.
0:00 Start
0:02 Intro
0:43 Today's Toolkit
1:22 What NOT to Do
8:25 12 Golden Rules of Siliconing
17:50 Siliconing my Shower
You can now access my 🛠Charlie DIYte Amazon Tool Store here www.amazon.co.uk/shop/charlie... - where you'll find all my tried, tested and much loved DIY tools arranged into handy categories.
Join the WeShop shopping revolution here app.we.shop/join-charliewhite, and start earning shares (20% of the value of what you buy) every time you shop. Also check out my exclusive posts under my Profile.
I talk you through the 7 things that you should NOT DO when applying silicone, followed by my 12 GOLDEN RULES for achieving perfect silicone joints - applying these rules at the end of the video to new silicone joints in the tricky, hand glazed tiles in my bathroom shower area.
Today's Tool Kit
- Cramer Profiling Kit 7 geni.us/s8fpaIH (Amazon)
- Cramer Profiling Kit 7 replacement blades geni.us/RV74 (Amazon)
- Cramer rotating silicone nozzle geni.us/uO5FA (Amazon)
Heavy Duty Silicone applicator gun (buy a good one as the cheap ones tend to break)
- geni.us/VPEM (Amazon)
Clear Silicone
- geni.us/459Cr6 (Amazon)
Mapesil AC Silicone
- geni.us/xK8WP (Amazon)
Everbuild Sealant Strip Out Tool
- geni.us/RHgDzu (Amazon)
Bahco Knife
- geni.us/wdSPqM (Amazon)
Stanley Scraper
app.we.shop/dGU5 (see WeShop instructions above - you'll love it!)
Silicone Remover
geni.us/AaSn1al (Amazon) or for a cheaper alternative geni.us/kAhQ (Amazon)
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
MY 12 GOLDEN RULES FOR THE PERFECT SILICONE JOINT
- De-grease joints first with methylated spirit or acetone
- Use the right silicone for your joint - high or low modulus
- Use a FUGI Silicone Profiling Tool
- Look for the greatest gap & select smallest tool to cover gap + 2/3mm
- Cut the silicone nozzle at 90 degrees ie straight across &
- Push the silicone into the joint
- Aim to cover 2 not 3 sides of the joint
- Use adapter for smooth lines over transverse joints
- Work in short sections
- Corners - up first then right to left
- Clean Fugi with paper towel when finished
WHAT NOT TO DO
- Don't use tape
- Don't use your finger
- Don't shape silicone in a concave profile
- Don't use water & detergent
- Don't cut the nozzle really small or at 45 degrees
- Don't pull the nozzle along the joint
- Try not to cover all 3 sides of the joint
SUBSCRIBE - you can subscribe to my Channel here:
/ charliediyite
LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- / charliediyte
-- charliediyte.co.uk/
-- / charliediyte
-- / charliediyte

Хобби

Опубликовано:

8 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3,8 тыс.

@CharlieDIYte 4 года назад

🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools. Help support me on Patreon -www.patreon.com/charlieDIYte (includes Discord access).

@saraohara2504 Год назад

Best caulking demo ever!! Thank you so much - this was so helpful! The fact that you took the time to explain how the standard techniques could cause problems, and you even showed close-ups - to me, that made all the difference & convinced me your way is the best way. I appreciate you sharing this. Thanks again!!👍💗✌️

@familymanof6169 Год назад

So this isn't a SALESMAN?

@occamsrazor9183 Год назад

Thank you so much for such detail in the "don't do's" This is the first video I clicked...Worth every minute...

@coltutley 6 месяцев назад

As a professional builder for over years, This is one of the best explanation videos I have ever seen on the subject. Thank you so much for the time you have put into this and thank you so much for the quality content, you rock!

@CharlieDIYte 6 месяцев назад

Thanks so much mate, I always think it speaks volumes when a professional builder is humble enough to tell me I'm doing something right. 😉 Shows you're still hungry to learn and therefore that you're clearly very good at your job (after all, we never stop learning)!! Take a look at this one if you've got a moment as I didn't tackle corners properly in the vid you've watched, but clearly it's not always practical for you guys to wait for a joint to set before finishing it. Thanks again 👊 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.htmlsi=OMqy7xUv2Mvcx8vp

@stco2426 3 месяца назад

This is my go-to every time.

@kym7440 3 месяца назад

Wish I'd seen this years ago! Just about to do my shower tray. I did buy the tape to go around, but it didn't work. VERY good explanation. I've always used detergent and my finger, with the results you described. I'll now buy the tool recommended. Fingers crossed! Thanks again

@s.o.3753 3 года назад

As a girl who has never DIY'ed anything in her life, let me say, this video was amazing. As someone else said, who knew a 20-minute video on silicone could be interesting! You really do make it interesting and easy to understand, though. I now feel ready to redo my landlord's awful silicone job. Many thanks, sir!

@CharlieDIYte 3 года назад

Aw, thanks so much for that! One thing, if you've got any vertical sections to do/ corners, check out this video too, if you haven't already ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html 👍

@Lis422 Год назад

How did it work?

@saraohara2504 Год назад

@S. O. You posted your comment 2 years ago about redoing your landlord’s awful silicone / caulking job, so maybe you can’t answer this, but do you remember how you removed the caulking? Did you just cut it with a razor? If you recall how difficult the removal process was, please let me know!

@useditem_tk Год назад

@@saraohara2504 get a caulking tool kit.

@ItzPhill Год назад

You can also use a Stanley to remove old/mouldy caulking.

@michael.schuler Год назад

One of the most crystal clear presentations I've ever seen on any topic on YT. The first seven minutes, explicating in meticulous detail how NOT to apply silicone, is invaluable. (I have for years followed as standard practice almost every single one of these DONT's.) I am a professional finish carpenter, with a keen interest of late in improving my caulking game. This video delivered more useful content, accompanied by an incredible degree of logical explanation of underlying principles, than I could have imagined exists. Thank you!

@CharlieDIYte Год назад

Thanks so much Michael, I really appreciate that. As I always say, a professional tradesman who is still receptive to learning new skills or challenging what he's learnt over the years is clearly very good say his job 👏 If you have a moment just check out this video too ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html as I didn't cover corners very well in the one you've watched.

@ronchurchill6492 7 месяцев назад

It's funny as I just watched a video on Home Depot and they used tape to mask and their finger to smooth out.

@toecutter1015 6 месяцев назад

Crystal clear presentation?? WTF? Folks making caulking how to videos and making up their own bullshit nonsense. I was in real caulker for many years and none of these utube videos are anything even close to “ pro “ actually he’d be fired so fast just like So many others. I worked for one guy who already Fired 12 Mostly Real Caulkers who all of which were way more skilled and knowledgeable than this wanker

@stuartgc8950 2 года назад

I am not a diy person, have never siliconed anything in my life, followed this video to the letter and am very pleased with the outcome, many thanks.

@CharlieDIYte 2 года назад

That's awesome news Stuart. Great work and thanks so much for letting me know. 👊

@1971dave 2 года назад

@@CharlieDIYte sick and tired of seeing people using the tool the wrong way round and this fekin spray,,, as you've pointed out quite clearly the soapy spray goes behind the silicone, as an engineer and Builder now in my 50s, when this tool first came out many years ago the rep described the silicone tool as the ultimate tool for silicone and you must use a soap spray, and I am probably 80% certain he used the tool chamfered going against the silicone, then many years later on another job seeing this guy using one of these tools, no spray and the sharnford Edge behind the flow of Direction, as in the video,,,,, yep we've all used fingers and tape, and to think back in the day we used to lick our finger and run it over the silicone then again and run it over the silicone,, dow Corning silicone in Barry South Wales, fabrication company I worked for at the time we did a job inside there, pesticide fungicide and chemicals that went into the silicon, the industrial silicone mice likes the stuff apparently hence the pesticide, I told this guy i used to lick the silicone for smoothness he said I'm surprised I've not got an extra toe growing,, good video man... Dave

@HooxNZ 2 года назад

The Gordon Ramsey of silicon application.

@CharlieDIYte 2 года назад

Ha, thanks 😉

@darrenmechen1136 3 месяца назад

Watching a silicone video but can’t spell it 😂😂,or is it an American version of English 😮

@johnmurray9422 3 месяца назад

The ultimate insult.

@xuscbs 5 лет назад

If I had a company, I'd hire you as the VP of Quality! I love the attention to detail and the power of keen observation! Thank you for taking the time to educate all of us.

@johndoe4532 3 года назад

14 years I've been a Floor Layer and I've always hated siliconing. I came across your channel when trying to find the right drill and this came up in my suggested yesterday. I tried this technique today and its so much easier with such a professional finish. For any tradesmen reading, you get a lot of waste as Charlie shows but you just need to add the cost onto the job. Nothing worse than a decent looking vinyl or luxury vinyl tile job and poor sealant finish. Thank you so much for this great demo, and if you haven't already, I would highly recommend subscribing to this awesome channel 😊

@CharlieDIYte 3 года назад

Aw, thanks so much John, I really appreciate that. As you say, you do get waste by virtue of the way it works but don't forget the waste was amplified in my case because I was applying such a wide bead, and if the waste upsets people, as long as they're quick, they can tool it into the next run before smoothing with the tool. Plus the bead is so much stronger so you're doing your clients a massive favour, particularly on a floor that they'll be cleaning often. I always think a tradesman who is prepared to embrace new techniques (ie prepared to innovate) is clearly very good at their job 👍 Thanks again.

@slitor 3 года назад

"-Don't use tape" "-Don't use fingers" DAMNIT DAD! That's was the two advices he gave me!

@justanaussie2822 4 года назад

I like how you explain, why, knowing why is very important. Adults need a reason. Keep up the great training videos.

@justinkinter8651 3 года назад

Absolutely, it drives me insane when the host of a tutorial video gives instructions but doesn’t tell you WHY something needs to be done. It leaves you in the crappiest position for troubleshooting.

@Quickblood1 6 лет назад

Genius. I like the idea of not simply explaining why or why not to do something but demonstrating, that really helps.

@CharlieDIYte 6 лет назад

Quickblood1 Thanks - really appreciate that!

@johnfleury6155 5 лет назад

Wow! Thank you for the educating us on how to properly caulk a bathroom.

@ComicBookMalc 3 года назад

Holy cow this is a game changer! I've just done the bathroom in about an hour with no swearing or covering myself/the room/kids/dog/wife in sealer. Thank you

@kennethlindop7752 2 года назад

Thank you for this tutorial Charlie. I followed your instructions to the nth degree and everything slotted into place. I’m 76 years old and I’ve been a DIY enthusiast for most of my life. I’ve lost count of the number of bathrooms I’ve refurbished and never as Silicone been so uncomplicated and easy to apply. You are amazing! Thank you.

@CharlieDIYte 2 года назад

Kenneth, thank you so much for your wonderful comment! I'm so chuffed it worked so well, which of course it would as you implemented it so meticulously! You've probably already seen it, but for future reference I also have a corners video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html Thanks again 👍🏻

@SteveH51 4 года назад

I’ve worked in construction for 30 years and what i love about this video is the open mindedness to question supposed tried and tested methods like the fairy liquid in a bottle. RU-vid is such a great resource

@CharlieDIYte 4 года назад

Thanks so much Steven. Can I throw that back at you and say that anyone who has worked in the industry as long as you but who is still receptive to new ideas/ processes is clearly good at what they do👏 If that guy hadn't trolled me I'd probably never have done this video but I was so perplexed at how the soap bottle brigade had got away with this for so long I felt something had to be done about it.. Thanks again!

@deniseg9311 4 года назад

Hi Charlie, I just wanted to express my appreciation for this video and how helpful it’s been for a newbie to siliconing like me. I followed your dos and donts and the job got done with a much better result than I expected. I have now been able to re-silicone my shower tray and the bathtub. Thanks so much! My next project will be re-caulking my wooden window panes 💪🏻😃

@danieljackson630 2 года назад

I know this is an old video but being a pretty naff diy'r, you have inspired me to seal my own bathroom...being 41 and scared to make a mess I watched this, subscribed to your channel and did my bathroom...thanks mate, truly, thank you

@CharlieDIYte 2 года назад

So pleased to hear it went well, Daniel and massive thanks for subscribing 👊🏻

@charcoalanderson8010 Месяц назад

I bet it looks awesome! Good for you trying something new even if it was a little intimidating at first.

@diemkt 2 года назад

This was amazing - I made a proper stuff up of my bathroom about a year ago (it looked alright, but the silicon lifted quite quickly after applying). I watched this video before doing it last week, and went out and made sure I was properly prepared this time. Thank you so much for making this freely available - you're helping millions of people (by the view count), and I hope your business is blessed and booming.

@CharlieDIYte 2 года назад

So glad to hear that, Tim. Did you see my corners vid too ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html (in case you've got any other siliconing to do). Business is fine thanks. It's never as easy as it looks to make money from this, which is why I've set up my Buy me a Coffee channel now I'm doing this full time, but I'll get there in the end 👍🏻

@spazda_mx5 4 года назад

I just wanted to thank you for this video, I'd been putting off resiliconing a shower tray that had a slight leak but watching this allowed me to approach the job with a plan and do it correctly.

@CharlieDIYte 4 года назад

Thanks so much for getting in touch. Really glad to hear it's gone well 👍

@chrisammann4041 5 лет назад

What a pleasure to watch - a breath of fresh air. Loads of common sense, and lots of received wisdom challenged clearly and eloquently. Who says a 20 minute video on applying silicone can't be interesting!

@CharlieDIYte 5 лет назад

Thanks so much Chris!

@simontrangmar4537 3 года назад

Well said Chris

@joemak100 2 года назад

I like that you go with what you know works with reasoning to back it up.. Many tradesmen are taught the one way and never consider there could be a better technique. Peer pressure/ridicule among onsite colleagues ensure they never try a different method. Keep up the good videos.

@CharlieDIYte 2 года назад

That's exactly right, Joey, but the really good tradesmen are the ones who have commented on here that they've watched this technique and realised they've been doing it won't all these years. Someone who is receptive to new techniques is, I think, clearly conscientious and good at his job!

@daveweston3416 3 года назад

Nice one Charlie, have been ‘caulking’ for years; watched your vid and purchased the 7 kit, what a game changer, brilliant results. So easy, working in short sections, first caulking job I have ever finished without swearing or going around the house shutting doors. Thanks Charlie, well done mate 👍🏼👍🏼👍🏼

@johnh9449 Год назад

😂 That made me laugh!

@toecutter1015 6 месяцев назад

Short sections? Why? You can either run the gun or you cannot you can either knife ( tool) or you cannot And NONE OF THESE U TUBE IDIOTS HAS A CLUE!!

@chriswherry65 5 лет назад

Brilliant pro video, I've been building and fitting out houses for 40 years and although I thought I was pretty good I got several points from this that I'd never considered! Thanks for spending the time to do a great demo.

@johnavi 3 года назад

This honestly makes sense. I always thought the detergent spray method would ruin the caulk that was just applied. Thanks for the lesson.

@julessmith5581 2 года назад

This is a really great, no BS, plain English explanation and demonstration of what I've been doing wrong but didn't really understand 'why'! Just Ordered the Cramer tool - omg they're so good; my 'grouter's-sealant finger' was delighted! Thank you so much for this Charlie; massive shout-out.

@CharlieDIYte 2 года назад

You're very welcome Jules. The Cramer tool is awesome isn't it. Check out my corners video too ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html if you've got a moment as I didn't really cover corners in the vid you've watched. 👍

@drdecco1 Год назад

Agree, good content but the verbosity…… I won’t go on.

@karlk2636 Год назад

Wow- I've been remodeling homes for over 40 years, and thought I knew how to caulk. This video took my scale to a whole new level. Bravo, Charlie! Now I'm going to have to look at your other videos and see what else I need to learn from you?!

@CharlieDIYte Год назад

Thanks Karl, really appreciate that. You might take a look at this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html for doing corners. 👍

@MrDivinemethod 4 года назад

I don't usually comment, but the level of work, thought and information you provided here is worth at least taking a second to say thank you!!

@CharlieDIYte 4 года назад

Aw, thanks Siva. I'm blown away by that. If you're planning a silicone project check this video out ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html as I didn't mention corners in the one you've watched. 👍

@ChrisPinnell 4 года назад

Best advice ever, i have just re sealed my shower / bath and it looks amazing, never thought i'd ever get such a finish. lot of nonsense advice on YoutUbe BUT NOT this video, thumbs up

@garvielloken3929 3 года назад

Bang on!

@garvielloken3929 3 года назад

@Francis Rodrigo Ceblano hahaha

@iansheldon2584 2 года назад

qqqqiiioqjkjjjjjikiiu

@johnwaskiewicz6742 2 года назад

@davidbooker2525 3 года назад

These are just the best DIY videos I’ve ever watched. Charlie is a real quality guy and it shows in all the detail he goes to as he explains what to do. I also like the fact that he’s open and prepared to diss some old views on how to do things as he explains why with clear logic and demonstration. Top of the class to me.

@CharlieDIYte 3 года назад

Thanks so much David. Check out my corners video if you have a moment as I didn't really cover them properly in this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html

@nicholasvaughan501 3 года назад

What are the tools called were can u get them from.

@toecutter1015 6 месяцев назад

All these caulking videos on utube are absolutely horrible and completely clueless on caulking and everything related to it

@suejames3208 Год назад

I always enjoy watching your vids. Even though you did this 5 years ago, you always reply to questions. A class act. I'm the DIY'er in our house as my husband hasn't a clue! Been married almost 52 years. As he says, more than 3 life sentences. I have always liked to be able to "sort" things out. Keep up the good work.

@funkyg77 4 года назад

What a great tutorial, thank you. Always used my finger as thats how my dad and others i know have used!!! Will invest in a set of tooling for sure...

@followthetrawler 5 лет назад

Thank you! I have struggled with silicone for more years than I care to remember, and have probably tried every tool, every trick but never got good results. Fugi kit has been added to my toolbox and all the other crap is in the bin.

@harryrock169 3 года назад

This guy has to be one of the best on RU-vid. Very detailed step by step explanation & backs it up with a demonstration so how can you fault him? Thank you for taking the time to share your valuable skills.

@CharlieDIYte 3 года назад

You're very welcome, Harry. Thanks for the comment. Take a look at my corners video if you have a moment ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html as I didn't really cover corners properly in this video 👍

@richardnevin Год назад

Thanks Charlie for a really thorough and informative video tutorial. I was about to spend ages masking up my bath before applying a thin silicone bead and smoothing using my finger. Really useful to know why this is all wrong 😊

@LesLamb 5 лет назад

Best tutorial ever! Thanks for the work you put into this.

@morigross 4 года назад

Wow. Like everyone else, was just about to do my bath in the "don'ts way" - now changing the plan. Thank you a million!

@alanlake5220 4 года назад

Ha ha me too

@VirusOfCyrus 3 года назад

OMG... Your comment has made me TERRIFIED! Like I so scared for all the children in thew world knowing that there are "somehow" actually humans like you out there that actually werent born with "Common-Sense"! U didnt know how to use Silicone?!? That shouldnt be possible, its literally the EASIEST thing you can do in life besides breathing, its 200% easier than brushing your teeth (this is NO sarcasm or exaggeration at all either) There is literally "3" steps, make sure the surface is clean enough & isnt oily (it doesnt even have to be very clean or dry either, Ive used silicone on very dirty surfaces b4 or Subwoofer boxes with quite a lot of saw dust & it doesnt matter) then it literally just squirts out & u smooth it off usually with you finger, THATS IT! HOW can u mess that up or not know how to do it? I was 14 when I first used Silicone & I didnt even need to read they instructions, all I read was what ANYONE with half a brain would which is the drying time, Silicone is literally Rubber based GLUE! You cant use glue?? Firstly if your this terrifyingly braindead then you should own ANYTHING to even put silicone on! You wouldnt be able to drive a car or put a seat-belt on, this video is the single most pointless video in history, it should not need to exist as NOBODY should be even half this dumb, anyone that cant use a rubbery glue certainly should NEVER be allowed to breed, I cant imagine how terrifying it is to think people that somehow needed to watch this video could be allowed to have children! Those poor kids! They will never be able to listen to or learn a single thing from their father or mother or whoever it is that is too dumb to use glue. People this dumb shouldnt exist & Im VERY angry that you exist in my world when you dont deserve to, Common-sense is a "human" trait that ALL humans are "Born" with ok? This literally makes you not even human, do u think maybe your mum aborted you & u just never noticed??

@VirusOfCyrus 3 года назад

Also, WTF do you mean "Like Everyone Else"?? Ive NEVER met ANYONE in my life & never will (besides u & other not even human morons that insanely need to watch the worlds dumbest & most pointless video on "how to use fu*king GLUE!") that couldnt use Silicone! How dare you imply that "Everyone" is this braindead!? I couldnt be more insulted for you to think All my friends & myself are literally the dumbest people in history, like me they dont even know you & your already giving them the biggest insult of their lives?? EVERYONE I know, including my 80 year old grandmother can use Rubber based GLUE without needing to be told how to, just like (Apparently UNLIKE You) they can wipe their own asses & brush their teeth without needing to be shown. Also, you should NEVER be using Silicone or ANY Glue based product, I cant think of ANYTHING I could be confisent that you could use as literally EVERYTHING in this universe is harder to use than Silicone, AKA the easiest thing in the world, so NEVER insult everyone else because stupidly (what a surprise, u had another stupid thought) think they are the most braindead life form in the world. Retard, wtf.

@morigross 3 года назад

First of all, I am so happy I got trolled, this is the first time I ever got trolled by a real-life internet troll! I have to reply to it. So here goes Mr. Troll. Well, most people who do not work with or handle Silicone-based products and/or glue do not really know what they are doing. they believe glue = stick it on item 1 and attach to item 2, wait for two minutes and its done. This is the common sense you must mean to. Using silicone for the prevention of water/moisture into cracks in bathtubs can prevent a lot of monetary loss on account of having to suffer from water damage across your home. I believe you are not a homeowner, as you said, you have been doing silicone since you were 14 - what the hell? you mean you've been working at house renewal since you were 14? I was programming in basic, C, connecting Telnet and BBSs by the time I was 14. Since then I've been pretty good and I still believe that - yes, using Silicone is not a standard operation. When I came across the need in my house to repair the bathtub - I watched an experienced plumber placing the silicone as you said using your thumb and voila, looks like it worked. WRONG. three months later, there was leakage from that exact area. I decided upon myself to perform this simple task as you said, myself. So I bought silicon and was just about to do it as he did when I thought to myself: " Wait, if the expert guy used his skills and Magic Thumb and couldn't get it right, why should I think I know any better?" so I decided to research myself the best way and came across this amazingly good video which showed that using your thumb isn't really the BEST option when it comes down to stopping moisture and water from getting in through your sealing. I hope you saw this video, saw the error in your ways and learned how to seal with silicone in a better and more efficient way - so your customers (and I believe you are still doing this since you've been doing this since you were 14 as you said) will appreciate your hard-worked labor. I would like to also tell you to have a good day, enjoy your life, and keep writing these kinds of comments throughout RU-vid, spreading love and joy to all who read you. This enlightens me and makes me very happy and actually, I even paused my work just to go to your comment and reply back. But, I digress, so, to summarize I think Silicone sealing of housing sanitary items such as bathtubs - should not just be done because its obvious how it should be, but whoever does it, should know the full effects it may have on the house and not just man-handle the silicone with a Thumb because its CommonSense. I wish you all the best of luck and instead of replying to the second comment, I'll just leave this comment here for you to read. Besides, I'm sure your 80-year-old grandmother will be very happy to know this is what came out of her grandchild. I hope you find the best method of silicone sealing you can and be the best silicone sealer there is. Last note, please check your grammar and spell check your comments - not all people have CommonSense to know that "u" means "you", because please remember, "B" "C" "R" and "U" are letters, not words. Edited: Will not be replying further, I'm too busy working..

@ianboaler4958 3 года назад

@@VirusOfCyrus Congratulations on being so clever. I thought it was a very useful video because I grew up believing that the way to put silicon around the bath was to cut the nozzle small, drag it along the gap between bath and tiles and then use your finger to smooth it. Maybe with a bit of washing up liquid on your finger to stop it sticking. So I learned something even if you feel it was all really obvious.

@paulmathieson2855 3 года назад

Hi Charlie, superb vid, love the fact that you put effort into researching these things and share your findings. I’ve been doing ok-ish diy siliconing for years but have just re-siliconed a shower enclosure using your tips, tool recommendations etc. with what I can only describe as professional results. Thank you!!!

@sarachally2082 3 года назад

I've just done my bath following your instructions and I'm delighted. A more clumsy and hapless individual than me would be difficult to find, so it was a bit traumatic and there was as much silicone on me as on the bath, but it looks good and strong. We did it the "traditional" way last time and everything that you said could go wrong, did go wrong. So thank you Charlie (and hubby can do it the next time).

@legambaz 4 года назад

Man! This is definitely the most comprehensive and useful video on siliconing the right way. The science and thoughts behind doing a good job you share is priceless. Thanx.

@martingleave8967 4 года назад

I've just down my bathroom following your way and it looks great, thank you

@beckyboyce1915 Год назад

Have never used silicone in my life, my boyfriend attempted to silicone our bathroom a few months ago and did an awful job, so thought I’d do my research and show him I can do a better job! 😂 this video was amazing, I was about to just go for it and use my finger to smooth it out but quickly learnt from this vid, that this isn’t the way. My boyfriend came home and didn’t believe I’d done such a good job, so thank you so much 😁

@barbaramcq5180 3 года назад

I have just done the nearest thing to a perfect seal that I've ever done in my life. Why did I not find this guide and this tool 40 years ago? Absolutely brilliant!

@ThunderStruckMTB 4 года назад

Thanks! This kit worked exactly for me as it did in this video..... and it was my very 1st shower / silicon job - ever.

@LD-ms9ki 4 года назад

I’ve never been very good at silicone home diy. This video has helped me massively in re-doing my bathroom. Thanks!

@1tonytony1 Год назад

I used to dread doing the siliconing, you’re a star! It worked exactly how you suggested. I had just got out the masking tape, washing up liquid etc before watching your “what not to do”. Thanks very much, no more dread!

@Javainthebox Год назад

What a fantastic video, along with the corners video! I’m 60 and have never siliconed until today. I got the Fugi tool set, got over my fear and siliconed my shower/tub. Charlie, I’d give my first job a B+ to A-! The corners are tricky when you’re using the leveling tool for tile grout joints, and my tub and shower didn’t meet at a 90 degree angle; however, your videos and the Fugi tool set gave me the ability to achieve a very nice finished product. Thanks SO much, and I am now a new subscriber. 🙏🏼❤️🙏🏼

@harrybobs4014 5 лет назад

Charlie this is the tutorial I've needed my entire DIY life! Thank you so much - looking forward to checking out your other videos. 👍🏼

@CharlieDIYte 5 лет назад

Cheers Matt. Glad you found it useful. Thanks also for the comment!

@irfanchaudhry8042 4 года назад

Being an electrical engineer, one of my heroes is Michael Faraday. You are the Michael Faraday of the DIY: logical, precise, elegant & simple!

@johndebsconnolly1550 Год назад

Hi Charlie, Thanks a million for this vlog. Historically I have dreaded re sealing the en suite shower tray. I bought the profile tools having watched your vlog a few months back and this morning I watched it again before biting the proverbial bullet. The end result was nothing short of fantastic - and trust me, I am my biggest critic. Now an avid follower of your site - please keep them coming!!

@CharlieDIYte Год назад

John, that's excellent news. Brilliant work and thanks for letting me know. The only problem with this video was I didn't cover corners properly - there's this one for that ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html Thanks again 👊

@gowithgerdrivingschool8552 3 года назад

Thanks Andy, I’ve had the Fugi ki for years but still opted to spit on my finger. I resealed our shower yesterday following your guide and it’s great. Thanks again

@dominicolley1261 4 года назад

Genius, have just siliconed new bathroom using all the 'do not' use methods and, already experiencing the issues shown. Wish I had found this video first. Now going to redo and, use this video as my master guide, great work.

@VirusOfCyrus 3 года назад

OMG! WHAT?? You are the most perfect example of what all the repairmen & carpenters etc keep constantly referring to as the "Retards that keep them in business"! All these dumbest humans in history, the dumbest humans possible that watch a home improvement show & try to do things themselves, completely mess it up & have to call a pro to fix it. & HOW can you have messed it up anyway when EVERYONE I know was "born" with Common-sense & will tell you that Silicone is the EASIEST thing u could possibly use! I mean HOW can you not even use "Glue", & not just any glue but "Rubber" based glue which is the Easiest possible, there is Only "3" steps that NOBODY should have to read instructions to know either, 1, make sure the surface is fairly clean (Which barely matters as Ive siliconed Many things that have been dirty, covered in sawdust or even "wet" when using most bathroom or plumbing silicone that clearly says it works on wet surfaces) 2, it literally just squirts out onto the surface & 3, smooth it out usually just with you finger! So HOW the hell could you FAIL at that? You realize its literally a well known fact that anyone with half a brain & common sense will tell you that its HARDER to brush your teeth than it is to use Silicone. I mean stupid, you just commented & used the word "Genius" for a video on HOW TO USE GLUE!! & the easiest glue in the world at that! Ive used silicone since I was 13 & its literally IMPOSSIBLE to mess it up! Its just Rubber based glue, thats it, & even easier than other glues it wont sudden;y dry on you fingers etc so u have ages to wipe it off & even plumbers & carpenters etc just use their fingers to spread it. WHAT is there to possible mess up? There is NO way the single dumbest humans in existence should ever be allowed to breed, Im TERRIFIED to think that you may have kids, people this insane & incredibly stupid should NEVER be allowed to breed, I mean if u cant use Rubber glue theres NO way you could ever drive a car, feed your children, I mean if u cant use silicone then u wouldnt be able to even brush you teeth, HOW is it even possible for supposed "humans" like you even exist? When humans are "Born" with Common-sense, Im not joking or exagerating when I say I dont think someone this dumb could even come close to being called a "human", Im TERRIFIED for my kids & Every single other child out there to know people out there as braindead or retarded as you exist.

@PNH-sf4jz 3 года назад

@@VirusOfCyrus Your comments say more about you than about anyone else. Very aptly named - "Virus". By including your friends in your rant, you are also insulting them. Pity you have so much time on your hands to attempt to insult others, than doing something useful with your own life.

@jimbeaux4988 3 года назад

I want to cry right now. I also just did a lousy job on my bath and now I found this video.

@erroreliminator2.076 3 года назад

@@VirusOfCyrus talking about missing the point ... and some very important points while you're at it raving on about common sense.

@briannmandysegal4385 4 года назад

I watched your video. I took your advice ...and the job turned out perfectly. Thanks!

@tpmark2001 3 года назад

Bloody amazing. Thank you!! I feel empowered to do it myself rather than forking out money to people who rip you off AND do a crap job!

@nickklissas2865 3 года назад

THIS WAS ABSOLUTELY THE BEST TUTORIAL ON CAULKING. We have a rental townhouse and the shower stall and bathtub perpetually mildow around the basins. I spent a few hours removing silicon caulk around the bathrub today, and was set for taping and caulking tomorrow. CHANGE OF PLANS: WILL BE USING YOUR METHOD. Thanks from Arlington, Virginia, USA.

@99crossy 4 года назад

So glad I watched this video as I was about to do most of the ‘dont’s’ thanks to other videos. Well done on a really well made video

@paultickle4808 5 лет назад

I really can’t thank you enough. I watched the video 3 times, bought all the kit and have just done it this morning. It is by far the best job of applying silicone I have ever done. I was dreading doing it as well but your tips made it really straight forward. Thanks again! Paul

@CharlieDIYte 5 лет назад

Paul that's the best news! Thanks so much for taking the time to let me know how you got on. Makes doing all of this worth while!

@peterhouben3753 2 года назад

The best video on this subject I have seen thank you 👍

@CharlieDIYte 2 года назад

You're very welcome Peter. Check out the corners vid too if you have time bit.ly/3c7SKio as I didn't cover them properly in the vid you've seen.

@mrnobody4237 Год назад

I just did my GF'S Landlords shower following your methods step by step, and it's turned out amazing. Some of the tile joints were over 10mm away from the shower tray, and some touching it, uneven tiles, the lot. I've probably done something like this about ten times in my 48 years (for myself) and it's never been close to looking as good as this. Many thanks for making this video Charlie.

@CharlieDIYte Год назад

That's fantastic. Well done buddy and thanks so much for getting in touch. 👊

@becr9369 4 года назад

So glad I watched this video before I started my siliconing project... thank you 👍🏼

@VFRDon 4 года назад

Charlie, you're right. This is just about the opposite of what I've seen and learned and you explained why some of my project came out less than beautiful. Never realized how useful the silicone caulking tools are. Used to always use my finger. I'll be purchasing a set soon. Thanks.

@CharlieDIYte 4 года назад

Thanks for that. Yes, go for it, you won't be disappointed!

@johnobrien5921 3 года назад

Charlie I been doing this wrong for over thirty years! Many thanks, everything you said makes perfect sense.

@desiman0786 3 года назад

So glad I caught this video as I'm going to be re-sealing my bath as the old silicone needs coming off.. This video has helped me on how to do the whole job from start to finish. Again another great video. Thanks so much 👍

@2lomp 4 года назад

Bought one of the Fugi kits a couple of years ago and they are very good. Along with your helpful extra tips like cutting the mastic applicator at 90 degrees, very helpful 👍

@thenullco 4 года назад

Hi Charlie. Watched this a while back and ordered the set. Went on holiday for two weeks and mentally prepared myself to reseal our shower. Came back and went in all guns blazing. Most stressful few hours of my life. A comedy of errors but made good in the end. Looks ace now - like a brand new shower. Thanks for the pro tips. 🙏🏼🙏🏼🙏🏼

@Jonas_Aa Год назад

Does it still hold up?

@thenullco Год назад

@@Jonas_Aa Yeah still looks great!

@peterhawkins5262 3 года назад

Cracking bit of advice, just siliconed in 5 windows in my cabin and it went really well!! Thanks for the tips!!

@andrewbolton1959 2 года назад

Perfect advice, thank you! I really didn't like doing silicone before, I've now completed a near perfect silicon application throughout my bathroom.

@CharlieDIYte 2 года назад

Fantastic news Andrew. Thanks for letting me know 👍

@johnbustos3033 4 года назад

Great DIY video, thank you for the detail information. Gives me confidence to take on the my shower glass re-caulking project.

@emilysimek7302 4 года назад

This is an EXCELLENT video! Needed this for recaulking my shower stall. I had just watched another video that did it all wrong, including the soapy water! Glad I found this one.

@CharlieDIYte 4 года назад

You're welcome - thanks for the comment 👍

@DanAuns 2 года назад

I've tried everything, watched hours of videos. This is with out question the state of the art. Great vid dude, really appreciate the hard work here, awesome video.

@CharlieDIYte 2 года назад

Thanks buddy. Check out this one too if you have time ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html as I didn't cover corners too well in the original. 👊

@xcomboy666 8 месяцев назад

What's excellent about your presentation is you give the reasons behind every point. The explanation of how the pre-application of soapy water prevents a good bond was especially helpful. Thanks!

@CharlieDIYte 8 месяцев назад

Thanks I really a appreciate that and there's a corners video you ought to watch too ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.htmlsi=1aj_63S5icyshxso 👊

@garyverrell8644 4 года назад

Great video, I'm a DIYer and have been using the Fuji tools for a few years now, but still learnt a couple of things from your video. One tip I have, if you have the luxury of time, is never to do both sides of a corner on the same day. I do one side and then come back next day and do the other side after the first side has dried. Gives a perfect mitre joint. Maybe need 3 days for a 3-way joint.

@craftedCurveWoodwork 4 года назад

Just re-siliconed my bath and shower following your steps, so glad I watched the video before I started. Thank you.

@CharlieDIYte 4 года назад

That's great news Stuart. Thanks for letting me know!!

@Kayyyman 3 года назад

Still using your caulking tips and still going strong! Thanks for showing!

@JamesSherwin-jm6xs Год назад

Thanks for this video. I've never thanked anyone for a video before. Before I was scared of doing silicon. Such a mess. But I followed your method and it was brilliant! Neat job and no mess. Looking forward to doing more sealing now!

@markyour6998 5 лет назад

This is the best video I've seen regarding caulking (as we say in the states). Nice job! I'll be using this technique. It makes complete sense. Thank you!

@cassie3939 5 лет назад

Brilliant! Charlie, Thank you so much for taking the time to share your knowledge and skills, incredible value here for me and I'm grateful. Ignore the trolls and know that there are many who appreciate the generous and well delivered content you provide. THANK YOU SO MUCH!

@CharlieDIYte 5 лет назад

Thanks Cassie - and I really appreciated You taking the time to send me that comment! Sound advice that I will take - it's your comments that keep me doing this!!

@katierandall9191 3 года назад

Thank you for explaining everything so well, I'm about to take the plunge and do my bathroom! Am feeling more confident now.

@rickystephenson518 2 года назад

Hope you used the crema silicon kit it’s the best one out there

@tonylatimer1308 3 года назад

Thank you, Charlie. Intelligent use of science is always the best way.

@abuladula 5 лет назад

It's this type of thinking that advances the world. Thinking and resolving issues that we didn't even know we had till it's pointed out and then a solution proposed.

@CharlieDIYte 5 лет назад

Wow, thanks so much for that!

@RestorationsFOD 5 лет назад

I have to say I consider myself a seasoned siliconist. After watching this video I am forced to rethink my self taught methods. I really take it as a positive though, so thanks for showing me where I may have been doing things incorrectly, and pointing me in the right direction. This really is a useful video. I know there are trades out there that will argue tooth and nail that their method is best, but you cant really argue with the detailed information in this video. In my humble opinion this is pure gold. Thanks Charlie

@stelladessoy 3 года назад

If only I'd watched this video twenty years ago. So helpful. Thank you.

@CharlieDIYte 3 года назад

Thanks so much. Chuffed you find it useful 👍🏻

@porteouz 3 года назад

How have I never seen these before, a job I used to dread is now an absolute doddle. Thanks alot Charlie

@guysubmarinerguy9387 5 лет назад

BLOODY NORAH, by far the best DIY video on anything - not just siliconing. I've been siliconing quite regularly for some 25 years but I will now be using this method. Brilliant!!!

@CharlieDIYte 5 лет назад

Thanks Guy - LOVE that comment! Get yourself one of those FUGI kits. You won't regret it! Thanks again.

@guysubmarinerguy9387 5 лет назад

Already ordered one on the strength of your video - you should be on commission! Will check out your other videos in due course!

@CharlieDIYte 5 лет назад

guy submarinerguy Yes, I definitely missed a trick there! Great stuff - let me know how you get on!

@adrianjarratt 6 лет назад

Charlie. I am a professional bodger - if it can go wrong, it does. My shower and main bath were in desperate need of re-sealing and I was dreading the cursing and frustration that would inevitably lead to a shoddy result. Having found your video, I saw a glimmer of hope - could I possibly undertake the work without pain and end up with a decent finish? Well, yes and yes - I'm delighted. The only thing I would do differently would be to buy a silicone kit with the transverse joint attachment - mine didn't have this. Having subscribed and looked at some of your other videos, I am feeling confident at tackling more jobs around the house. Many thanks and keep up this great work. Adrian

@CharlieDIYte 6 лет назад

Adrian Jarratt Hi Adrian. Thanks so much for taking the time to tell me how you got on - comments like yours are what inspires me to keep producing these videos! Absolutely delighted that you pulled out off! If you can silicone successfully the world of DIY is your oyster my friend! As my video has hopefully shown you the bodging had less to do with your ability and more with the preparation and application! Keep up the good work and many thanks for subscribing!

@dennisbailey7214 5 лет назад

Thanks Dennis

@billbryne 2 года назад

Watched this again earlier today as I had another bathroom to do. It really helped me. I have to say I was very pleased with the tips about cutting the nozzle straight rather than at 45% and also cutting the nozzle at the same measurement as the tool you use to finish. Very good tips and I was able to do a real good job of my mastic thanks to this video - nice one.

@CharlieDIYte 2 года назад

Thanks Bill, really glad you found it useful. There's also this one bit.ly/3c7SKio for corners of you have a second, as I didn't cover corners particularly well in the vid you've seen. 👍🏻

@nickfarrow8752 3 года назад

Your videos are inspirational while renovating our bungalow! Just purchased this kit to help re silicone our windows and help not make a mess of any future jobs!

@CharlieDIYte 3 года назад

Aw, thanks Nick, I really appreciate that. Good luck with the rest of the renovation. You'll love this kit! Oh, and if you have any corners to do, check out this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html

@piopetralli6190 5 лет назад

This DIY video is simply brilliant! Thank you so much for your detailed explanations and demonstrations. Now I feel like a pro! Cheers.

@mbarker1958 4 года назад

well done! as an engineer i appreciate these insights

@Confettish1 3 года назад

as a pastry baker I also appreciate these insights

@zeddyorg 2 года назад

As a fireman I appreciate these insights

@lancepearce7995 3 года назад

After having a leaky shower tray your advice and video has been a lifesaver. Cheers bud 🙌🏼

@CharlieDIYte 3 года назад

Ah, great work Lance, and thanks for letting me know 👊🏻

@RestorativeRenaissance 3 месяца назад

Thank you so much I bought the kit you described and followed your tips. For someone who has never laid silicone before it looks excellent. I had been dreading this job and there was no need whatsoever.

@Snozzle2412 5 лет назад

Resealed the bath today, after watching this video a couple of times and buying a Fugi tool. WOW ! Can't believe how good it looks, amazing. Never thought I'd ever get to do it like the pro's, but seriously impressed with the results.Can't wait to do another one. Cheers Charlie!

@CharlieDIYte 5 лет назад

Get in!! Well done, and thanks so much for taking the time to feedback how you got on!

@professionaltraveler2043 Год назад

Great Video! Well done and without any fluff. Each step was presented in an easy to understand manner. You shared the pros and/cons of other methods and added personal experiences to support your conclusion for the most effective and efficient way to get the job done right.. and then followed up with a clear demonstration of each step. A lot of folks posting instructional videos on RU-vid could learn a few things from you.

@CharlieDIYte Год назад

Thanks, I really appreciate that. Here's the one I did on corners as I didn't cover corners properly in the vid you've watched ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html 👍

@kenkingsflyingmachines2382 Год назад

I've been doing my own home repairs and remodeling for 40 years and I sat with my mouth hanging open through this whole video. How'd you get so smart so young? Thank you!

@biggles258 4 года назад

Hi Charlie, thanks so much for this. I've been a finger-bodger for years but have now seen the light. Subscribed.

@CharlieDIYte 4 года назад

Thanks mate. Really appreciate the comment and the sub!

@biggles258 4 года назад

@@CharlieDIYte No problem - as @DAVAD M DAVAD said, I appreciate the proof you supply with your logic. I have a problem that I hope you can help me with, though. I can see the benefits of using the FUGI Kit where the top of the bath is flat and at right angles to the wall. Do you have any tips for coping with a bath that has a raised shoulder before it drops down again to meet the wall?

@taralynm.4860 5 лет назад

This is by far the best and most informative video I've watched about caulking! Thank you for being so thorough and sharing!

@CharlieDIYte 5 лет назад

You're very welcome Taralyn. Thanks for letting me know!

@ahmedsulaiman3828 Год назад

This is by far the best siliconing video on the internet, thank you!

@grahamwest9697 3 года назад

This just proves that every day is a learning day! Been trying hard for years and after watching Charlie, I realise I needed training. Thank you for the tutorial

@CharlieDIYte 3 года назад

You're very welcome. There's one in corners too which you might have s look at (I didn't cover corners particularly well in the one you've watched) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EErbuodMOAM.html

@saltyjonny1 5 лет назад

Thanks for taking the time to explain 😁 truly helpful I'll be on it tomorrow so long as I bought the right silicone lol

@tomlloyd1965 3 года назад

Absolute genius, I had no idea about fugi tools or low/high modulus sealants, I was about to do it all wrong. Looks amazingly neat. Thank you.

@CharlieDIYte 3 года назад

Thanks mate. Check out my corners video too if you have any of them to do bit.ly/3c7SKio

@africanviolet7817 3 года назад

Thanks for sharing your knowledge. I so wish I watched your video first before attempting to seal some joins. Contrary to what some people think, it is only easy when you know how and what to do to avoid the pitfalls. I appreciate you showing us what you discovered. I'm now going to scrape it all away and start again!

@jaredhazelby8760 8 месяцев назад

Great job - after watching this my latest attempt at sealant application looks as good as anything I've seen and crucially does the intended job of sealing. Thanks for posting.