Тёмный

How to assemble an inline six-cylinder gasoline engine. 

Rini Anita
Подписаться 466 тыс.
Просмотров 23 тыс.
50% 1

Only $1099.99, Use $200 OFF Coupon Code: H200
inline six engine kit: bit.ly/3KXYLOn
buy more engine from Stirlingkit: bit.ly/3mWlVN6
Building an Inline 6 Engine That works
It's a real working inline-six engine kit for adults. The 1/8 mini I6 engine is authentic with a classic blue and silver color scheme that is never out of fashion, as closely as to the real engine. Thrill your curious motorheads with these metal gas-powered mini-engine kits. Just get to build a realistic 6-cylinder motor, power it up & watch it run - with moving pistons, spinning fans, smooth engine sound & more.
Howin L6 is Every Motorhead’s Dream Project
Just forget cheaply plastic-made model kits with missing parts. This complete engine model building kit gives you everything you need from start to finish with over 600 premium CNC machined metal parts. Just follow the detailed manual to start your engine-building tour. This inline 6-cylinder combustion model kit will rev to life after all 600+ quality engine kit pieces have been assembled with a step-by-step paper guide. It’s the first fully functional 4-stroke 6-cylinder combustion model engine kit for at-home and automotive classes used to thrill curious teenagers about engines through the building process.
REAL Internal Combustion Engine Kits
This is one of the best mini engine kits that run because it cannot only allow you to build an authentic 6-cylinder internal combustion, but you can also hear the real engine sounds which allow you and your kids to grasp mechanical principles beyond ordinary engineering play experience. And It's considered the most educational engine model kit that works for teenagers and adults ages 18 and more, who dream to be engineers.
Realistic & Powerful
.Long Stroke:
Taking the long stroke as the engine design blueprint, it effectively provides higher torque. And the customized flexible oil seal ensures excellent sealing performance in high-speed operation.
.Water Cooling:
Designed with a cooling water groove inside the cylinder block and water pump for circulating power, the model is able to work in conjunction with a cooling fan later to strengthen the cooling performance and extend the working time.
.Valve Mechanism:
Features a valve overhead and the camshaft structure on the bottom. Push rod control valve switch makes this more stable.
Built with a cross crankshaft structure, five-section full support, bearing at both ends and middle copper bearing bush, the engine boasts more smooth operation, more sensitive acceleration response and high efficiency.
.Accurate Carburetor:
Enjoy more accurate adjustment, more sensitive throttle response and more stable performance thanks to the brand new dual carburetor with pump.
.Engine Model Building DIY:
Crafted from ultra-precise components, the engine model gives a strong mechanical sense, enables smooth assembly experience and provides users with fun, helping to build their own I6 engines.
.Wide Applications:
The extended output shaft can facilitate the expansion and extension of playing methods in the later stage, so as to be more compatible with RC model vehicles/ships. .Super-cool Engine Gift Idea:
As you and your kids build this model engine, you’ll develop critical thinking & mechanical skills. Plus, you’ll learn all about combustion engines from the detailed included workbook. so It’s ideal for both home & classroom use, so it’s a great gift for teachers, too. It's an amazing mechanical craft and a perfect gift for model enthusiasts.
Specifications:
material: metal;
Color: as picture shown;
Brand: HOWIN ENGINE;
Model: L6-210;
Form: KIT version;
Size: 252.05*88.56*144.48mm;
Weight: 2.4kg;
Engine type: gasoline internal combustion engine;
Valve train type: OHV;
Displacement: 21.0 (3.5*6) cc;
Cylinder: straight six cylinders;
Stroke: four-stroke;
Bore: 16.6mm;
Stroke: 17.0mm;
Speed: 3200-13500 rpm;
Power: 3.05ps;
Cooling method: water cooling;
Lubrication method: independent lubrication system (including oil pump);
Start mode: electric start;
Ignition method: CDI+distributor to control ignition (not included);
Spark plug type: Inch Thread 3/16-40 Spark Plug (not included);
Starting power supply: 7.4V 2S lithium battery (not included);
Fuel: 92# and above gasoline (not included);
Suitable age: 14+;
Packing method: color box;
Packing list:
.1*Engine Kit Set
.1*Tools Kit
.1*Manual
.1*Distributor
(Note: the starter kit is not included, you need to buy it yourself.)
#stirlingkit #WhyWeengine

Хобби

Опубликовано:

 

4 июл 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@tremorist
@tremorist 9 месяцев назад
Lubrication during assembly is a must. All moving parts and friction surfaces.
@qomary5803
@qomary5803 11 месяцев назад
Kang, koq lama gak upload. Request bis dikasih mesin ini ya😂
@aashmohmmad6413
@aashmohmmad6413 11 месяцев назад
This is amazing
@dulboreyofficial
@dulboreyofficial 11 месяцев назад
Very like it 😍👍🎉❤️
@marcelo403polo2
@marcelo403polo2 11 месяцев назад
Nice engine, just too bad it didn't start. If it would you would show it.
@darrenfawcett9912
@darrenfawcett9912 11 месяцев назад
Umm those piston rings are matched perfectly to each cylinder bore. You should have pushed them out one at a time then installed them back into the same cylinder. That’s why they are delivered to you already sitting in the cylinder, if it didn’t matter they would have just been thrown into a bag. All those moving parts and not one drop of oil? Also you should tighten down your head from the centre out not the outside in.
@johnkennedy2505
@johnkennedy2505 11 месяцев назад
you didn't notice the dot on the camshaft and the camshaft gear was not aligned.
@darrenfawcett9912
@darrenfawcett9912 11 месяцев назад
@@johnkennedy2505 yes noticed that, I’m sure the crankshaft split bearings should have been orientated a certain way as well but they look like they were put in any which way, I couldn’t really tell.
@ombmcofficial
@ombmcofficial 7 месяцев назад
belinya itu dimana ya
@ifatafs8350
@ifatafs8350 11 месяцев назад
Hadir No 1 . 😂 , selalu menunggu 😊
@zie102
@zie102 10 месяцев назад
Angkat aku jadi muridmu pakde 🙏😊
@ucnguyenxetairc
@ucnguyenxetairc 9 месяцев назад
Chú mua ở đâu thế ạ
@Rama.dnp1
@Rama.dnp1 9 месяцев назад
mau beli mahal sekaleee wkwkw
@subhaankhan7455
@subhaankhan7455 10 месяцев назад
on to kroo bro
@MrNando03
@MrNando03 9 месяцев назад
kok gk di kasih oli ya
@fanparoponauli0321
@fanparoponauli0321 11 месяцев назад
Beli di mana bang??
@dogpiebaldhd7372
@dogpiebaldhd7372 10 месяцев назад
di luar negeri pastinya ga ada di indonesia
@user-cm8ow1bc9n
@user-cm8ow1bc9n 3 месяца назад
好像是在中国买的,不太清楚,我在中国商店看国,价格比较贵
@Nana-93
@Nana-93 11 месяцев назад
berapa harga mesin nya kang?
@dogpiebaldhd7372
@dogpiebaldhd7372 10 месяцев назад
3jt lebih
@leeedsonetwo
@leeedsonetwo 9 месяцев назад
Why did it not work?
@tremorist
@tremorist 9 месяцев назад
There are several nonos in this vid: He didn't lubricate any of the moving parts while assembling them, he also failed to screw down the cylinder head (from the center to the sides) properly, he left the valve rockers completely dry as well as the valve camshaft. This engine design with the camshaft at the bottom operating long rocker-rods is kind of flimsy and outdated because you have to adjust the valve tolerance manually and with different values for intake and outlet. Running or starting with e.g. too tight valves will ruin the engine within a very short time. When you watch the vids of @JohnnyQ90 you can see engine assembly done right.
@oataoc5339
@oataoc5339 10 месяцев назад
I like ur caption the truth u wrote..assemble. otherwise in India indian they wrote I invented. I like it
@fuckel2856
@fuckel2856 11 месяцев назад
Давай уже быстрее его запускай!!!
@bigmesstest230
@bigmesstest230 8 месяцев назад
He probably hurt the engine by not using lubrication when assembling
@rinianita1860
@rinianita1860 8 месяцев назад
Hmmm....This machine is indeed complicated.
@schizy
@schizy 10 месяцев назад
So the six cylinder engine doesn't run? $1.3K pissed away!
@oataoc5339
@oataoc5339 10 месяцев назад
Where u add oil
@hfdzquotes
@hfdzquotes 11 месяцев назад
Pertama
@curtisnewton895
@curtisnewton895 11 месяцев назад
lol so you cannot make it run or what ?
@sayeed3479
@sayeed3479 10 месяцев назад
Bro i Lick your all video but make a super car please.
@ABes.QforMedia
@ABes.QforMedia 10 месяцев назад
Kerja bagus dengan mesin enam silinder itu, Rini Anita! Saya dari Quantum Tech HD. Kami menyukai karya Anda dan kami ingin berkolaborasi dengan Anda. Kami telah mengirimkan email kepada Anda dengan detailnya, silakan periksa. Terima kasih banyak!
Далее
Chinese Hit & Miss Gas Model Engine
8:59
Просмотров 2,7 млн
Mini Gasoline Engine 2.6cc Water cooled
6:18
Просмотров 1,1 млн
Backstage or result?😈🔥 @milanaroller
00:12
Просмотров 8 млн
skibidi toilet 74
07:02
Просмотров 20 млн
I built a brand-new Rotary Valve Engine, and it works!
12:51
Rewinding the Turnigy Rotomax 150cc BLDC to lower kV
8:46
BMW E30 Alternator Restoration
18:22
Просмотров 6 млн
PATATES RULO
1:00
Просмотров 7 млн
#чихиртма
0:57
Просмотров 999 тыс.
Это же гениально
0:19
Просмотров 12 млн